Windows Firewall - Can't Get Any Port To Show As Open
Apr 26, 2012
I have done any and everything just to even open a specific port on my pc and try PortForward's port checker and web based checkers, and I can't get the port or any port to show as open.I am trying to make an IP webcam on my network viewable from the internet.My setup is like this"gigaset 204a" / DSL modem (Ethernet cable goes into internet port on LINKSYS WRTGS wireless router) [code] Disabled I went to LINKSYS port forwarding, the address I am forwarding to is the ip webcam server. I know if the IP changes it won't work, but before thinking of setting up a static ip for the webcam on my network, I need to get it to actually work.Nothing I do will open any ports on my pc. I've tried enabling DMZ. I've even set rules for windows firewall to allow incoming/outgoing connections on the port I want, i've disabled windows firewall. am running on windows 7 ultimate. The problem for my really is as far as I can tell, I can't even open a port to allow connections to my computer from the outside. Of course all my internet games etc work fine and have never had a problem, but I can't seem to manually open a port I want.
View 4 Replies
ADVERTISEMENT
Jun 14, 2011
I have a say 'server', with win xp running on it. I want to open a port on the system so that that computer can be accessed within the network domain. for example when i open an internet explorer browser and type in [URL], i need to be able to connect to the /mls.net/eclispe.aspx present. so for that i have to be able to open a port
View 1 Replies
View Related
May 21, 2011
I've got a Belkin wireless router and Windows 7. It's so I can use the application Gameranger as it requires UDP Port 16000 open. I don't have a static IP if incase I needed one tell me how to do that to.Here's the Gameranger link here:
View 2 Replies
View Related
Oct 20, 2012
I would just like to to open UDP port 123 in the ASA 5510 Firewall so that our Primary Domain Controller could use this port to sync time with an external time source. We have already added an access rule for this port under the firewall configuration in ASDM 6.4 and this port was also allowed in the inbound and outbound rule of the PDC's Firewall but it seems that it was still blocked.
View 23 Replies
View Related
Nov 23, 2011
I travel a lot and use wifi in a lot of different places (hotels, airports, etc.)My apps don't always work and I suspect that in some instances the broadband provider is blocking some of the ports I need.I don't need a port scanner like NMAP since that scans a target IP for listening ports.What I need is a way to figure out whether some firewall between my PC and the Internet is blocking specific UDP or TCP port ranges.
View 2 Replies
View Related
Jun 18, 2011
I have a cisco 1760 with running VIC-2FXO (working fine). I'm now trying to replace that line with an ISDN line through a VIC2-2BRI.
View 4 Replies
View Related
Feb 26, 2011
i just ran a NMAP scan on the outside interface of a ASA 5520. It seems that the TCP Ports 7070 and 554 are open on all NAT interfaces and the outside interface of the firewall. I tried telnet on port 554 and 7070 and got connected.
View 10 Replies
View Related
Sep 8, 2011
This is problably a stupid question but how do I open a prot on a cisco 1811? I have a cisco 1811 and a computer that has VNC installed on it. I want to be able to access that computer from out side the network using the external ip address and port 5950. People outside the network will be able to open vnc viewer and type in *external ip address*:5950 and it will be directed to the computer with a static internal ip address of 10.11.101.10. What commands do I use to do this?
View 23 Replies
View Related
Feb 14, 2012
We have an ASA5510 that we need to open port 25 to allow mail traffic to our internal Exchange server.We have 2 interfaces defined... one named Internal on eth0/3 ip 10.1.x.x and one named Internet on eth 0/0 ip 96.56.x.x.We followed the instructions in ASDM for allowing access to a public server but confusion over definitions have stopped us.ASDM asks for the internal interface and the internal server IP... no problem there because the internal interface and server have two different IP addresses. The Internal interface is eth 0/3 (10.1.1.1) and the server is 10.1.1.2.
However, when we get to the External interface (eth 0/1) there is only a single IP address 96.56.x.x but the ASDM asks for an Interface IP and the IP people would use to get to the mail server from the outside. Inasmuch as we have only 1 external IP address (which connects to our upstream Cisco router which in turn connects to the ISP modem) we used the same IP for both but the ASDM returns an error indicating they must be different.
Apparently we do not have a clear understanding of what the ASDM is actually asking for. When the ASDM asks for the external interface we assumed it was asking for the named value we gave the interface (which is Internet). The named value "Internet" has an ip associated with it 96.56.x.x. But when the ASDM asks for the ip people on the outside would use to get to the mail server (we created a named value called "mail server" and gave it the same ip address as the external named value. This duplication of ip address causes the ASDM to return the error stating that external Interface to be used and the external ip to be used cannot be the same.Have we made an error when we assumed that when the ASDM asked for the external interface it meant the ip of the external interface or was it asking for the eth number (as in eth 0/0) for the interface?
View 33 Replies
View Related
Jun 30, 2012
I have a static IP address over 100Mbit fiber. I've installed a Mac Mini as a webserver and opened the ports 80, 443 and 5900 and a few others for minor services. Everything works fine: the http server (and https as well) is up and pepole can reach it from wan.Yesterday I tried to setup the FTP service with less success. Into the ACCESS RULES I enabled the FTP service and, as a result the port 21 opened up.
But if I connect via Cyberduck to the server I can navigate through the folders but I can't download anything. So I tryed to open up the port 20 for data transfer with no result. Same issue when I tryed to setup the AFP service to mount remotely server volumes: port 548 opened up but no success with port 549.
View 1 Replies
View Related
Mar 13, 2011
I need to open ports 5000 and 5001 on my Cisco PIX 501 to enable some users to be able to connect to our CCTV from outside, how should I open these 2 ports?
View 5 Replies
View Related
Mar 11, 2011
I am trying to open port 52199 on my ASA 5505 I have gone to firewall, access rules and then add tcpip.Not sure if that is the correct place but cannot get it to work?
View 1 Replies
View Related
Jan 29, 2013
I configured ASA to open port 21, 3389, 5900 (outside access in) but when i check port just success : 21 and 3389, Error: 5900 If i configured with only one port 5900 or 3389, is't ok, i don't understand what 's the problem?
ASA5510>
ASA5510> ena
Password: ***********************
ASA5510# show run
: Saved
[code]....
View 7 Replies
View Related
Jan 16, 2012
when I want to let email to come through the ASA5505 from outside to DMZ and Inside network, are the below command lines correct and good enough?
access-list outside_DMZ extended permit tcp outside-network-ip dmz-network-ip eq imap4
access-list outside_DMZ extended permit tcp outside-network-ip dmz-network-ip eq pop3
access-list outside_DMZ extended permit tcp outside-network-ip dmz-network-ip eq smtp
access-list outside_inside extended permit tcp outside-network-ip inside-network-ip eq imap4
access-list outside_inside extended permit tcp outside-network-ip inside-network-ip eq pop3
[code]....
Are there any other TCP ports want to be allowed and other command lines need to be added?
View 5 Replies
View Related
Dec 6, 2012
We have a ASA5510 and I need to open port 22 for a speacific IP in our LAN outbound only.
View 15 Replies
View Related
Feb 28, 2012
I have a weather station at our high school that needs UDP port 9500 open inbound/outbound to specified IP addresses.
Cisco PIX Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(5)57
View 1 Replies
View Related
Feb 12, 2013
I have 4 public IPs on Router 3845 interface FastEthernet 0/0/1. IP as below.
50.200.2.2
50.200.2.3 secondary
50.200.2.4 secondary
50.200.2.5 secondary
I wan to allow ports 80 to 90 on 50.200.2.3 for my webserver (192.168.10.50)
View 5 Replies
View Related
Sep 18, 2012
I have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.
View 1 Replies
View Related
Mar 20, 2011
I'm running Windows XP, SP3. This is a friends computer that I'm trying to fix. It had a virus which I removed, however it left behind a damaged computer. Now there are no network devices that show up in "Network Connections" or in Device Manager. I tried to reinstall the drivers, but I got this error: "The Realtek Ethernet Controller was not found. If Deep Sleep Mode is enabled Please Plug [sic] the Cable".
View 1 Replies
View Related
Jun 21, 2011
I have a small business network computers w/a linux server. One computer was infected with viruses which I removed via kaspersky/norton/malware anti-bytes. I run windows xp professional on this computer.However I run into the following problem:
1) In my network places the documents on the server do not show as a network place-this is despite me being able to access these documents via a folder shortcut
2) After I open the network files/folders from the comp, I am unable to use the find feature because the folder is not listed under the look in drop box. I tried changing workgroups and ran into the same problem.
View 10 Replies
View Related
May 12, 2012
What is open port 49153 used for and how do I close it and any other open port that I don't know they got opened in the first place.
View 1 Replies
View Related
Sep 5, 2011
how do i open port 22 in my router
View 1 Replies
View Related
May 29, 2012
My friend is trying to open port 88 and it says this specific message "The specified ports are being used by other configurations".I did a netstat, netstat -a, and another netstat that i forgot and we could find anything on his computer using port 88.His router is a Netgear wndr3400.
View 5 Replies
View Related
Dec 10, 2012
I have an IP camera (foscam). It's connected to my wireless router. My router is connected to my motorola cable modem. My isp is Cox.I want to be able to view this camera from outside (ie: when I'm at work) by going to http://(my real ip) : (port). Port that I use is 88. I can't seem to do this.
First I set the port 88 to the camera's config. I can see the camera when I'm at home (going to 192.168.1.106:88). Reading the manual, I need to forward the port 88. So I go to my linksys wireless router 192.168.1.1 and single-port forward 88 UDP TCP (both) to 192.168.1.106.This doesn't solve the problem.I go to Open Port Check Tool and put in port 88 and it says I could not see your service on (my real ip) on port (88)
View 9 Replies
View Related
Feb 15, 2012
i have isp ip address i have opened port 9000,37777, 80 but when i check my port if there opened or not it keeps on say block?
View 1 Replies
View Related
Jul 27, 2011
I use server 2003 in my netwerk now I change the users computer from XP to windows 7, how can i set the icons on the users desktop in windows 7.
View 1 Replies
View Related
Aug 23, 2011
sometimes I let my friends to use my laptop but unfortunately they can see password of my wireless router which my laptop is connected to by going to this wifi network Properties and then to Security and then check in "Show Characters" box..so is there any way to prevent them from seeing my wifi network password in Windows 7?
View 1 Replies
View Related
Apr 8, 2012
network adapter does not show up under device manager windows xp
View 4 Replies
View Related
Jun 4, 2013
I've enabled RDP on a laptop, but I can't connect to it. Pinging the laptop works. nmap shows ports open, but not RDP. netstat on the laptop shows nothing listening on 3389. I've also tried rebooting. [code]
View 1 Replies
View Related
Jun 28, 2012
is there a way to show the last time a port was active/inactive on a catalyst 4500?
View 3 Replies
View Related
Feb 21, 2011
i have 3g mobile dvr, put a sim card directly into it and it gets an ip address and you should be able to view it remotely but i cannot connect. i can ping the ip no problem and i checked that the port the dvr uses (9000) was also open on that ip and i used a locator to trace the ip and it pinpoints the ip to my isp's base so why i cannot connect to it
View 2 Replies
View Related
Mar 10, 2012
recently my brother has blocked some ports on our home router because he thinks i play too much video games. ( i actually dont play a lot ! ). He says there are alternative ways to make it work again and challenges me to figure out how to change the ports back to normal but he would not give me the access to the router, meaning i dont know the Login and password for it. Plus I am not allowed to reset the router to factory settings. For about three days I have been looking up ways to change the ports on my router through my computer but nothing has worked so far. I have a gaming tournament coming up and I really need to practice with my team but i cant get access to it.below is my system's information,
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 3560 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 468745 MB, Free - 420932 MB;
Motherboard: ASUSTeK Computer Inc., K53Z
Antivirus: None
View 2 Replies
View Related
Jul 26, 2011
I am trying to host my own Minecraft server on my home desktop PC and I can't get my router to open port 25565 but it won't. I tried everything and I have concluded that my router's ports are all closed and can't open. I've tried using multiple DNS providers and DMZ but none worked. I have restarted my computer, restarted, rebooted, and reset my router and modem and still nothing. I have a Linksys e1000 router.
View 15 Replies
View Related
