Running Vista and cannot connect to the internet through the Atheros AR5B91. Can connect via USB adapter and LAN cable plugged in to router. Network discovery was custom, for some reason, but turned it off. Everything else in the house works, iphones, xboxes and another laptop with the same Atheros adapter.
View 2 RepliesI just got new desktop and the wireless internet is about half the speed as my old laptop. The network adapter on the new desktop is 802.11n Wireless LAN Card, the laptop has Atheros AR5B91 adapter. the wireless router is a netgear N300.
View 2 Replies View RelatedSometimes I cannot connect to the router after my computer has been to sleep. This has occurred on different routers. I can still see the network, but am told I cannot connect when attempting to connect to it. Restarting/shut down does not solve the problem - I have to restart the router itself, and then my computer will reconnect automatically. Other computers/devices will be unaffected by this and maintain a connection the entire time. Atheros AR5B91 Wireless Network Adapter using Windows 7 Service Pack 1.
View 2 Replies View RelatedI have reloaded windows vista in my desktop. Every thing is working fine except that system is not detecting the lan cable. I have tried with a new cable but no luck.
View 1 Replies View RelatedThe laptop is an HP. The network adapter is having the common problem of being unable to connect to secured wireless networks. I know this is a common problem and I HAVE tried everysingle suggestion posted on this forum, including but not limited to: reinstalling drivers, making sure the adapter is configured for the appropriate gateway and even doing a full restore to factory defaults. NOTHING has worked.
View 3 Replies View RelatedI'm using HP Pavillion dv3-2165ee Win7 32bit with Atheros A9285 WLAN adapter.problem is that my notebook is not detecting any wireless network.it is as if my adapter is turned off. when i switch it on, Bluetooth works but WLAN dont. I tried turning it on/off couple of times but it didnt work. I'm not sure if is just a timing, but it started when im on a cafe when i plugged in my friend's flash drive then after a while i lost all available wireless networks that time.At first i assumed it's because of virus, so i tried driver reinstall/reformatting/recovery disc but nothing solved the problem.
When I browse the net, i saw this Xirrius Wifi Inspector so i downloaded it with a cable connection then when i used it, it was able to detect the wireless network i have in my house but just for a couple of seconds, and the network disappeared.I tried other drivers, but i didn't work. As i've said earlier it is as if turned off.I've run this diagnostic test from Atheros driver and got this result with my WLAN switched on.While on this screeny, you can see in HP Wireless Assistant that my WLAN & is enabled, but at the same time Windows Mobility Center is indicating that my WLAN is not just turned off but it is like there is nothing there.
I've heard that AR5007 has troubles connecting to NetGear, but it's strange that I haven't had this problem until now. Maybe I've never needed to connect to a NetGear router before, but regardless.Wireless, it connects to the router but not to the internet. I've tried to follow what other threads have to say about this, but it's not really making sense or it's just not working.
View 1 Replies View Relatedl need to download this driver
View 1 Replies View RelatedMy wifes Toshiba laptop (vista) suddenly stopped picking up the wireless signal on our router. I have checked and updated the atheros driver and it now says there are no problems and everything is working correctly. But still there is no signal being received.
View 6 Replies View RelatedI have recently bought a Atheros AR922X Wireless Network Adapter and I have had problems with connecting to a 5GHz router. When I connect windows connects fine but the router changes to a 2.4GHz.So Does The Atheros AR922X Wireless Network Adapter Support 5GHz Internet Connections?
View 2 Replies View RelatedI currently have a Toshiba Satellite L750-04K, which has an Atheros AR9002WB-1NG wireless card.It's specs say it's a 802.11b/g/n, but it only offers 1 stream N and max's out at 150Mbps. While the card incorporates Bluetooth, it's a very basic wireless card.While I had a 'G' series router, the laptop connectivity was great and never dropped me off the network, however when I upgraded my router to a new 'N' series, my laptop would constantly drop off my network, requiring a constant resetting of my wireless adapter to get me back online. Other devices were fine on the same router.Thinking my laptop was faulty, I sent it back to Toshiba under warranty and while it tested ok, they replaced the wireless card as a precaution. When I got it home, it was exactly the same, constantly disconnecting.I've tried every troubleshooting measure available and I've come to the opinion I need to put a much better wireless adapter in my machine, especially if I want to utilize 'N' routers.
The wireless card I want to install is an Intel 6235 6235ANHMW WIFI WLAN BT Bluetooth 4.0 Half MINI Card. I chose this card as it has Bluetooth incorporated and it's also dual band and offers up to 300Mbps.Will this wireless card be compatible with my Toshiba L70-04K and apart from drivers will there be any other changes I'll need to make to ensure the card works correctly? I'm not worried about physically installing the card, my main concern is ensuring it's compatible and relatively simple to get it working and able to connect to my network. [code]
I have an Asus M50Vm laptop
Specs are as follows:
Windows 7 Ultimate 64-bit
2.26 P8400 GHz Intel Core 2 Duo
4 GB DDR2 400 MHz RAM
NVIDIA GeForce 9600M GS Graphics
And of course, the Atheros AR928X Wireless Network Adaptor.It seems that no matter what I do wireless capability cannot be enabled. I tried turning the wireless capability button on and off but to no avail. Then I pressed FN+F2 and it didn't fix it. In both those situations a box which displays the status of the wireless LAN connection comes up, however, it reads "OFF" regardless of me performing the above two "fixes." According to my computer the card is enabled and I tried uninstalling and reinstalling the device driver but nothing changed.
There are a ton of posts about this issue, and I have tried everything. I have an ASUS Eee 1040 PC with an Atheros AR5700EG wireless network adapter running on Windows XP. I've had the computer for a couple years and it has worked fine, until recently. Using inSSIDer, I can view all wireless networks within range, but using Windows, I cannot connect to any wireless networks. It gives me the message that "No wireless networks were found in range." I had a few hotspots that I would regularly use and they are not showing up in the list of preferred networks. I know for certain that some of the hotspots that are within range are indeed broadcasting their ssid. I can only connect if I manually add a hotspot as a preferred network and configure it with the correct security settings. Even then, viewing available wireless networks gives nothing, and Windows doesn't remember the hotspot. Here is what I have tried:restarted Wireless Zero Configuration service checked windows files haven't changed using sfc /scannow in a command window updated the driver for the wireless adapter rebooted the computer kicked and screamed
What else can I do short of reinstalling windows?
I cannot stay connected to the internet with my Asus. When I troubleshoot, it says the wifi was not on, turns it on, but I lose connection again and then can't get it back. Brand new. No hardware button.
View 1 Replies View RelatedI deleted the above program and now my wifi does not work. I've updated the drivers, uninstalled and reinstalled them and finally have replaced the wifi adaptor itself,
View 4 Replies View RelatedI have Vista SP2 and sometimes I can connect to some WiFis, but now I've had this problem to connect already with two different WiFis. First one was a shared WiFi in a residential house. That I solved by exporting and importing the wireless profile from the landlord's computer. This time even this solution failed me. Having imported the wireless profile in my new shared house, it asks for a password and accepts it, but then it says: "can't connect to UPC...". If I click "diagnose the problem" it concludes with "Wireless authentication failed because of a timeout"
Steps taken so far: I have now deleted all pre-existing wireless profiles from this computer -> no change
ISP: UPC (in Ireland), ADSL broadband Anti-Virus: just free version of AVG Atheros AR5007EG Wireless Network Adapter
See attached files for further info
Microsoft Windows [Versi�n 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. Reservados todos los derechos.
C:UsersOhrapirtelo>ipconfig /all
[Code].....
When I'm home I can get online but it's slow webstar. I used to be able to get online at the local McDonalds with free wi-fi, real fast. Now, the connection list doesn't show the "FREE McDonalds" connection.
I have: Atheros AR5B97 Wireless Network Adapter, Windows 7 on ACER Aspire 7741z-4815. It has been updating until recently, don't know if it's because I haven't been online as often or what.
So, i' m pretty un-satisfied with my WiFi speed so far and i have this laptop which has a wifi adapter ,Atheros AR5B93 Wireless Network Adapter And i' m getting internet from my neighbor above me, and i get in speed test max 2.4MB Download and 0.24MB upload and now i was thinking about a USB Wifi adapter to get more speed and i need some info about these antennas .
View 1 Replies View RelatedLaptop Fujitsu with Wifi adapter : Atheros AR9285 , lastest driver v10.0.0.52 April 2012
Win 7 32bit pro WLC 6.0.196.0 and AP 1142 , associated in 802.11G or N WPA 2 preshared key.
WLC Roaming parameter : minimum RRSI -80dbm, roaming hysteresis 2dB, adaptive scan threshold -70dBm, transition time 5sec.
The laptops are supposed to be compatible with CCXv5 program, but in WLC (and two controllers CT-5508) the client is not seen as CCX client compatible !
So roaming is bad. Even with a very good and dense wifi coverage (no coverage hole detected), because the laptop still stay associated with a far AP (until -90dbm), instead of roaming with the nearests APs (-40dbm !!)
Recently the wireless internet connection on only one of my laptops is really laggy. By laggy I mean that usually the connection is ok, 20mbps, but like once in a couple of minutes the connection slows down to like 3mb for a minute or so ( Speedtest.net - The Global Broadband Speed Test) and when it does the connection becomes really slow. This is very annoying when browsing the internet or playing online games, because it causes connection losts, and slows down loading webpages etc. The problem has to do something with my laptop because on my other (wireless) laptops and the wired PC these problems don't occur. The problem also occurs when no other PC is connected to the network.My laptop is an Asus K53SV and my wireless adaptor is an Atheros AR9002WB-1NG Wireless Network Adaptor. My ISP is UPC (The Netherlands).
View 8 Replies View RelatedI have three N-compliant devices and several G-compliant devices on my network. I also have two routers, one being used an an access point. The first is a Linksys WRT350N; the second is a Linksys WRT54G. I have the G router connected as an access point so that I can reserve the N router for the N devices and achieve N speeds.N devices:Toshiba laptop; network adapter is Intel 4965AGN.Toshiba laptop; network adapter is Atheros AR5008XLexmark Wireless printerRouter settings:WRT350N: Security Mode WPA2 Personal; Encryption AES; Network Mode N-only; Radio Band 40MHz.WRT54G: Security Mode WPA Personal; Encryption AES; Network Mode MixedThe best I can recall, I set the WRT54G to WPA Personal instead of WPA2 Personal because one of the G-compliant devices did not list the WPA2 Personal setting -- but this is based on memory only.To reserve the WRT350N for the N devices and achieve N speeds, I set the Wireless Mode to N-only and Radio Band to 40MHz., and each router broadcasts its own unique SSID. Once I set everything up, I saw a substantial increase in the link speed reported by the Toshiba Connectivity Doctor (I realize there are issues about taking these numbers at face value, but let me continue). The Toshiba Connectivity Doctor reported WRT350N link speed at 130 Mbps and everything appeared to be working well.PROBLEMUntil recently, no problems were apparent; the Toshiba Connectivity Doctor indicated the two laptops connected to the WRT350N at 130 Mbps, the printer connected to and printed via the WRT350N, and all G devices connected through the WRT54G. Recently, however, network performance declined and the Toshiba Connectivity Doctor indicated erratic link speeds ranging from 1 Mbps to 130 Mbps.I found through a little research that my quest to reserve the WRT350N router for N devices lacked one element: according to Linksys info for the router, setting the N Transmission Rate to anything other than Auto results in denying access to B/G clients.I set the N Transmission Rate to 270 Mbps (the highest setting). The Linksys printer works fine and the Toshiba Connectivity Doctor indicates a solid 130 Mbps link speed for the Toshiba laptop with the Intel 4965AGN adapter card.The other Toshiba (with the Atheros AR5008X adapter card), however, is now only able to connect to the WRT54G (the Toshiba Connectivity Doctor indicates a solid link speed of 54 Mbps to the G SSID). If I reset the WRT350N N Transmission Rate to Auto, the Toshiba with the Atheros card can once again connect to the N Router -- but the erratic link speeds and the network degradation returns also.I have verified that the Atheros AR5008X network adapter is N-compliant. There aren't many settings on the Atheros AR5008X adapter card configuration, but I can find no documentation on the Internet for this card.As far as I can determine, all firmware is up to date for both routers and all drivers are up to date for both adapter cards.I'd love to know what changed in the first place, but I'm more concerned with fixing this problem. How I can get the Atheros adapter card to connect to the WRT350N with the N Transmission Rate set to something other than Auto?
View 6 Replies View RelatedSince we upgrade WLC in version 7.0.230 my PC with atheros card (version client 8.0.140 and driver 9.2.0.419) have brief interruption. In System events we have a lot of events ID 4201 and 1007. I try use Windows Wireless Client and we have not problem but the roaming is not fast. I don't find other client Utility for Atheros.
View 2 Replies View Relatedwireless button on the laptop is not activating, there is no wireless connection even in My network places..
View 1 Replies View RelatedI have had some problems in the last few days regarding my wireless router. i am using a Sony Vaio VGN-NS30E laptop with a TP-Link Wireless N Adsl2+ modem router. ISP = Utility Warehouse. Network Adapter = Atheros AR928X Wireless Adapter.
I can connect via Ethernet, but as soon as i try and use my wireless it comes up with "unable to connect". I also have a Print server running in the other room to allow me to print wireless. I have had all the wireless connections working up until this week (monday).
Called technical support after losing internet connection repeatedly and internet getting slower. ISP know reckons i should be getting up to 11.5mb's per second download, but connecting is the problem now.
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies View RelatedI've got an issue with my router. The Linksys E1000.In my opinion it supports the Wireless-N mode, so does my wireless lan card which is the Atheros AR5B93 (also known as the Acer Nplify 802.11 b/g/n). When I connect to the router, it only connects in normal wireles mode, so no b,g or n mode. But when I look at the Client Tabel of the router all other devices connected to the router are in Wireless-G mode. Even my laptop doesn't connect in Wireless-G mode.I want to have my laptop connected in Wireless-N mode. What do I have to do, to make this working?
View 7 Replies View RelatedMy friend uninstalled some programmes on his Toshiba laptop and now he can only connect to the router via an ethernet cable. When trying to find wireless networks the message "No wireless networks detected" appears. Other laptops and devices have no problems connecting throughout the house. I've uninstalled and reinstalled the right drivers for the wireless adapter, checked that the TCP/IP settings are on obtain ip address automatically, checked that the NIC is enabled in the BIOS and checked that the WLAN is on automatic in the services utilty and there is no other WZC running.
View 3 Replies View Relatedmy network connection has not been detected suddenly....[URL]
Windows IP Configuration
Host Name................................:user
Primary Dns Suffix.......................:
Node Type..................................:Mixed
IP Routing Ensbled......................:No
WINS Proxy Enabled.....................:No
[code]....
I am using Nokia Siemens router. Recently there is an hack on the network. So I changed the security by enabling WPA2-PSK and AES and mac filter enabled. After that two of my roommate machines are not getting connected to WiFi. Even I cant see ssid being detected in thier machines. How to connect to the machines. I have tried by removing security also but those two machines cant even detect the network being broadcasted by us. But it is detecting other networks (neighbors wifi).
View 1 Replies View RelatedI recently did a recovery on my laptop and had to put everything back to factory settings (losing all my music, programs, etc) due to a hard disk issue that I couldn't fix otherwise. After several hours waiting for the process to finish I logged onto my laptop - a toshiba, and realized that my wifi isn't working. The computer says there is an issue with the LAN being disconnected, but my router is communicating fine with other devices. Also, the side switch that turns wifi on and off is lit up (indicating that it is on) despite the fact that Fn + F8 are not responding on my computer. Generally, the laptop cannot detect any wireless devices or routers.I did another system recovery after reading about the issue, and tried turning it on and off, etc, but with no success.
View 1 Replies View Relateda spare PC I have will not connect to the network via wireless, it is running XP Pro SP3, and is using a Xycel G-202 wireless adapter. It is seeing my Sky router, and trying to obtain an IP address, but failing every time.
I am using WPA-PSK and the key I am inputting is correct, my phone connects to the network with no problems.
I got a WVC80N Cisco wireless,Tried to set it up the camera there, no luck. The installation seems to go fine right up to the point where you disconnect the camera and it searches for it on the network, then I get the error message - camera not detected (even though when cabled to to router it is recognized). Tried it over and over, shut down rebooted and eventually forced the camera to reboot and erase all the settings and start over. No luck.Could it be my router is too old ? I thought it might be so I brought a second one in - a Linksys, pretty sure it was type N.
View 4 Replies View RelatedI have win7 on an HP Pavilion dv7. I came to my friend's house before, and his WiFi didn't come up as an option to connect to. I unplugged and plugged back in the router, and that worked and I was able to connect with no problem. But today, that didn't fix the problem. I have restarted my computer and the router several times, I have deleted the corresponding wireless profile under "manage wireless networks" list, I have turned off my McAfee firewall to see if that was blocking the connection, I have tried connecting manually through the network and sharing center, I have troubleshooted my wireless adapters (Atheros AR5009 802.11 a/g/n and Microsoft Virtual WiFi Miniport Adapter), I have turned off and turned back on my HP wireless assistant, I have updated the dirvers for the two adapters, I have installed the latest windows updates, I have done all I can think of. And it's not the router, because my cell phone can connect, as well as the other computers in the house, without any problems.
View 8 Replies View Related