Wireless Network Detected Won't Connect
Nov 12, 2011
a spare PC I have will not connect to the network via wireless, it is running XP Pro SP3, and is using a Xycel G-202 wireless adapter. It is seeing my Sky router, and trying to obtain an IP address, but failing every time.
I am using WPA-PSK and the key I am inputting is correct, my phone connects to the network with no problems.
View 4 Replies
ADVERTISEMENT
Apr 28, 2011
I have had this problem now for a couple of weeks, can't seem to find a solution, even after trying all sorts of things I have seen on the web. I can not seem to get the wireless internet to work on my computer. The problem started a while ago and since then I've actually formatted my hard drive and reloaded Windows XP and everything else back onto my computer. I ahve tried connecting to the wireless at home and at work and neither is working. My computer can see the networks when but can not connect to them. I used to have no problem connecting to my home network, I have not ever connected tot he one at work, just thought I'd try it when I couldn't get it to work at home.
1. Updating my LAN driver (I've tried numerous ones and the one that works best is the one that came with my windows XP)
2. Ran both Spybot and AVG to check on spyware/malware/virus and there was not a single thing on either one.
3. Tried many combinations of setup configurations with my home wireless set up. It is a password protected hookup that I have never had problems with before.So in seeing several posts on here I have the following information from my CMD
C:>IPConfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : gateway-ta06zkr
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
[code].....
View 11 Replies
View Related
May 11, 2012
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
View 2 Replies
View Related
Mar 5, 2011
I haven't had internet in a couple of months until recently when I got cable broadband and a TP-Link wireless router. The setup works fine with a ADSL cable but I can't get my laptop to connect to any wireless networks including my new router. If I run a windows troubleshooting diagnostic it says I have no preferred networks. If I go to "manage wireless networks" the box is empty and if I click "add" NOTHING happens. I can see my wireless networks in the networks box on the taskbar but when I click on them nothing happens (secured or unsecured) I'm pretty sure the problem is not with the router but maybe with the adapter or the pc itself. Others can connect to the wireless network
View 5 Replies
View Related
Jan 23, 2011
my network connection has not been detected suddenly....[URL]
Windows IP Configuration
Host Name................................:user
Primary Dns Suffix.......................:
Node Type..................................:Mixed
IP Routing Ensbled......................:No
WINS Proxy Enabled.....................:No
[code]....
View 1 Replies
View Related
Apr 6, 2011
I have a an HP Pavilion dv6000t notebook running Windows Vista.I have a wireless router at home and connect to the wireless signal using both this computer and my other computer that I use for work. Yesterday, out of the blue, my laptop stopped connecting to my home wireless signal.It detects the signal, but when I click on it to connect (something I shouldn't have to do, as it is configured to connect automatically), I get a message saying that it couldn't connect and suggests that the signal strength is low.I know that the signal strength is fine as I am connected just fine on my work computer.I can plug my laptop into the router using a cable and it connects just fine that way, so the only problem is with the wireless signal. I have restarted the computer, modem, and router, to no avail.
View 3 Replies
View Related
Aug 15, 2011
I am using DELL inspiron N4030 with Win7 ultimate 32 bit.Using a public network from BSNL broadband.The massage box shows connections are available but not connected.
View 4 Replies
View Related
Dec 6, 2009
I'm having problems getting the WUSB54G v2 adapter work with the WRT160N router (firmware 2.0.03). I'm running Vista Home Premium SP1. My wireless network is not detected by the WUSB54G and is not on the list of wireless networks I can connect to. I'm also having trouble connecting to WUSB54GP ver 4. The network is detected, but I can't connect.
Change the Beacon Interval to 75
Change the Fragmentation Threshold to 2304
Change the RTS Threshold to 2307
Now the WUSB54GP ver 4. is working perfectly, but the WUSB54G v2 still can't detect the network. I'm also running a PS3 and a laptop, which work perfectly with the WRT160N router.Also, the WUSB54G v2 system works just fine with my old router (WRTP54G).
View 9 Replies
View Related
Dec 9, 2011
I new to the linux version of os, i had recently installed Ubuntu 10.10 on my dell laptop Inspiron 15R N5010 model. The wireless networks are getting detected in the menu. even though its working fine in wired and mobile net cases. I think that the wireless driver is missing.
View 1 Replies
View Related
Nov 27, 2012
My wireless network card is not detected by the system and wont show up in device manager. the green light on the back of the card is still blinking, so it is getting power through the mobo. Wireless network card was working perfectly before swapping out my video card for a new 7850 and swapping out my RAM modules. The drivers are Up to date. I'm running windows 7 and the wireless network card is an atheros AR5005GS.
I don't understand why installing new RAM and a new video card would affect this?? I didn't touch that card, and have double checked it is still seated properly.
I have no other way currently to connect this computer to the Internet.
View 2 Replies
View Related
Jan 20, 2012
just brought this router model #wrt120n and can't get setup disk to install because it says i have no ethernet port
View 1 Replies
View Related
Jun 13, 2011
Since yesterday evening, my Toshiba Satellite Laptop (L505D-ES5025) hasn't been able to register my wireless network, though it registered it perfectly fine yesterday morning. I can only detect the local area connection, and can only connect to the internet via the ethernet cable (which is what I'm using right now).Even when I go to the "Change Adapter Settings" from Control Panel, it won't detect the wireless network that I use. The other computers/laptops in the house work, but this one can't regiester to it, even though it's the closest to the router. When I troubleshoot the problem, the only solution is to use the ethernet cable, but I can't depend on it since the whole point of using a wireless connection is to go wireless.I have tried the Control Panel solution of going to the device manager, but I can't find the wireless network from there. This Toshiba computer also doesn't have a physical WLAN button; rather hot keys are used (though when I use this, it doesn't anyways).I also tried to find the drivers for it to update, but those won't either update, or they do update but nothing happens. In other words, I can't do anything because my laptop can't find ANY networks whatsoever except for the one that is found after I connect it to the ethernet cable.My OS is Windows 7, 64-bit Home Premium.
View 12 Replies
View Related
Apr 8, 2012
Both the iPod and iPhone were on the network and working and now neither is on and don't detect the network at all. Have turned off and on both devices as well as the router to no avail. My mini Mac is up and running and has been all day.
View 1 Replies
View Related
Jun 7, 2013
when this error occurs
we can't see the cdp neighbor and the wireless crash.
we login onto the ap with console , we can see the error log : “Network interrupt loop detected” . last forever
View 3 Replies
View Related
Jan 5, 2013
I have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.
View 14 Replies
View Related
Mar 3, 2012
Am trying to share the broad band internet from the model to two PCs at home. One from LAN cable and the other from USB cable. But only the LAN cable gets connected. USB connection gets detected, but does not connect to internet.
View 1 Replies
View Related
Mar 19, 2013
HP G62-b12SA Notebook PC, WINDOWS 7 (64 BIT). wifi card realtek 8191se.The wired LAN is working fine. but the wi fi is not detecting any wifi network leave alone joining.the laptop was bought in UK being used in India. The wi if was working fine till about one month back.Windows couldn't automatically bind the IP protocol stack to the network adapter.
View 13 Replies
View Related
Oct 27, 2011
Network Adapter not detected my PC IBM 8123L5A any one can provide me driver software for the adapter
View 1 Replies
View Related
Dec 27, 2011
After adding Microsoft Windows 7 and thinking the system would work just fine, the error message we get says "no network adapter detected". We have an onboard Gigabit LAN network, but not sure if I also need some sort of network adapter to complete the set up.
View 2 Replies
View Related
Dec 21, 2011
i have a problem with my network adapter. i have successfully reformatted our desktop computer. I was able to connect to the internet for a week but after that, when i tried to connect again, it says that i do not have any network adapter and that i should install one. i tried to look at my device manager, there was no network adapter in my devices. i tried to install a realtek adapter but still nothing happened. i even tried reinstalling my os but it wont read by dvd. also, i have a laptop, but the internet connection is working properly there.
View 3 Replies
View Related
Aug 25, 2012
I could not boot the other day so I spent a few hour pulling everything out and checking memory components,etc.m taking the battery out finally fixed the boot issue but now there is no Internet or network detected or network adapter. It is not the router because pc in the other room is working fine on same connection. Mseems like a CMOS or bios issue. There was a message before boot about reverting to default bios settings. I can't update or remove driver because it is not detected and no Internet.
View 10 Replies
View Related
Aug 10, 2012
i have a problem suddenly cant connect through router anymore.. it said "DHCP server PPPoE not found" but the day before yesterday i can connect.. but if i connect without router (modem to PC/lappie) My router : Buffalo Airstation WHR-HP-G300N, i have tried several action like reset router into factory setting but couldnt solve my problem. i realize recently that DHCP thing cant find any IP address anymore.. is that my router problem/my ISP? when i try wired connection, i realize too.. My IP address, DNS become some what different than usual.
View 1 Replies
View Related
Oct 21, 2011
I'm trying to fix my brother's computer (an old Dimension 4600). At first ISP modem wouldn't even detect his computer on the network. I downloaded the Ethernet drivers and installed them and now it detects his computer, but it still won't connect to the internet
View 4 Replies
View Related
Jun 2, 2012
Recently I dual-booted my PC from Windows XP(On which the LAN card was working and i was able to access the internet) to Windows 7.Then i formated the drive on which WinXP was installed. Sometime later i noticed that the LAN card (Atheros A8151 PCI-E Ethernet Controller) was not working i went into the adapter settings in network control in the control panel and there was no adapter. i checked the device manager and there was no option called NETWORK ADAPTERS.
View 14 Replies
View Related
Nov 21, 2012
We a Q77 based Jetway JNF9E motherboard, and when we added a TP-Link PCIe network card it was not detected in device manager in windows XP. We tried a Dynamode card with a different chipset and that was also not detected. We then tried a PCIe Firewire card, and that was fine, indicating that the slot itself was OK.We then tried installing Windows 7-64, and that also failed to see either card. We updated the BIOS to the latest version, which had no effect. We then tried another PC with the same motherboard and that also showed the same problem. A USB network adaptor does work, but is not an ideal solution due to space contraints.
View 3 Replies
View Related
Jan 17, 2011
basically i have a desktop computer which i hook up directly to the router , anyway its coming up as an un identified network on network and sharing area , and when i select "connect to a network it only shows a PPoE Connection . I tried replugging the ethernet cable and it comes up an error message "windows has detected an IP address conflct"
View 14 Replies
View Related
May 26, 2011
I have a HP Pavilion dv6000 with windows xp. A couple of days ago the computer couldn't find any wireless connections. I've been into devmgmt.msc and looked, but I don't see any network card. In the folder Network Connections there are three alternatives, and none are wireless...I've tried to download the drivers for chipset, modem and network, but I still can't find anything.
View 1 Replies
View Related
Sep 9, 2012
I have purchased Netgear WNDR3700 v3 dual band router. I have set up the router according to all the settings. I tried to access wifi through my ACER 5734z Laptop.....But all i can see is only the 2.4 Ghz signal and no 5ghz signal. My wireless adapter is BROADCOM 802.11 Driver ver. 5.60.48.35
and let me know whether my laptop supports 5ghz signal
View 1 Replies
View Related
Nov 5, 2012
LED is solid red (front) and solid blue (rear). try resetting thru the pinhole button but problem still the same. Camera not detected anymore on my network. I've try switching on and off, problem still there.
View 4 Replies
View Related
Jul 31, 2012
My friend uninstalled some programmes on his Toshiba laptop and now he can only connect to the router via an ethernet cable. When trying to find wireless networks the message "No wireless networks detected" appears. Other laptops and devices have no problems connecting throughout the house. I've uninstalled and reinstalled the right drivers for the wireless adapter, checked that the TCP/IP settings are on obtain ip address automatically, checked that the NIC is enabled in the BIOS and checked that the WLAN is on automatic in the services utilty and there is no other WZC running.
View 3 Replies
View Related
Apr 29, 2012
I am using Nokia Siemens router. Recently there is an hack on the network. So I changed the security by enabling WPA2-PSK and AES and mac filter enabled. After that two of my roommate machines are not getting connected to WiFi. Even I cant see ssid being detected in thier machines. How to connect to the machines. I have tried by removing security also but those two machines cant even detect the network being broadcasted by us. But it is detecting other networks (neighbors wifi).
View 1 Replies
View Related
Jun 30, 2012
I recently did a recovery on my laptop and had to put everything back to factory settings (losing all my music, programs, etc) due to a hard disk issue that I couldn't fix otherwise. After several hours waiting for the process to finish I logged onto my laptop - a toshiba, and realized that my wifi isn't working. The computer says there is an issue with the LAN being disconnected, but my router is communicating fine with other devices. Also, the side switch that turns wifi on and off is lit up (indicating that it is on) despite the fact that Fn + F8 are not responding on my computer. Generally, the laptop cannot detect any wireless devices or routers.I did another system recovery after reading about the issue, and tried turning it on and off, etc, but with no success.
View 1 Replies
View Related
Jan 5, 2012
I got a WVC80N Cisco wireless,Tried to set it up the camera there, no luck. The installation seems to go fine right up to the point where you disconnect the camera and it searches for it on the network, then I get the error message - camera not detected (even though when cabled to to router it is recognized). Tried it over and over, shut down rebooted and eventually forced the camera to reboot and erase all the settings and start over. No luck.Could it be my router is too old ? I thought it might be so I brought a second one in - a Linksys, pretty sure it was type N.
View 4 Replies
View Related