AR5005GS - Wireless Network Card Not Detected After Installing New Hardware
Nov 27, 2012
My wireless network card is not detected by the system and wont show up in device manager. the green light on the back of the card is still blinking, so it is getting power through the mobo. Wireless network card was working perfectly before swapping out my video card for a new 7850 and swapping out my RAM modules. The drivers are Up to date. I'm running windows 7 and the wireless network card is an atheros AR5005GS.
I don't understand why installing new RAM and a new video card would affect this?? I didn't touch that card, and have double checked it is still seated properly.
I have no other way currently to connect this computer to the Internet.
View 2 Replies
ADVERTISEMENT
Jun 2, 2012
Recently I dual-booted my PC from Windows XP(On which the LAN card was working and i was able to access the internet) to Windows 7.Then i formated the drive on which WinXP was installed. Sometime later i noticed that the LAN card (Atheros A8151 PCI-E Ethernet Controller) was not working i went into the adapter settings in network control in the control panel and there was no adapter. i checked the device manager and there was no option called NETWORK ADAPTERS.
View 14 Replies
View Related
Nov 21, 2012
We a Q77 based Jetway JNF9E motherboard, and when we added a TP-Link PCIe network card it was not detected in device manager in windows XP. We tried a Dynamode card with a different chipset and that was also not detected. We then tried a PCIe Firewire card, and that was fine, indicating that the slot itself was OK.We then tried installing Windows 7-64, and that also failed to see either card. We updated the BIOS to the latest version, which had no effect. We then tried another PC with the same motherboard and that also showed the same problem. A USB network adaptor does work, but is not an ideal solution due to space contraints.
View 3 Replies
View Related
May 26, 2011
I have a HP Pavilion dv6000 with windows xp. A couple of days ago the computer couldn't find any wireless connections. I've been into devmgmt.msc and looked, but I don't see any network card. In the folder Network Connections there are three alternatives, and none are wireless...I've tried to download the drivers for chipset, modem and network, but I still can't find anything.
View 1 Replies
View Related
Feb 7, 2011
Wireless connection suddenly stopped working. Ran Dell Wireless WLAN Card Utility and got "There are currently no wireless adapters available and enabled". Device manager states network adapter working properly. I have disabled, then enabled it and it still won't work.
View 4 Replies
View Related
Mar 14, 2011
I am using HP dv9000 model laptop. Operating system is Windows 7. One month ago my laptop suddenly stopped detecting wireless card( It is working with Ethernet).
View 7 Replies
View Related
Dec 29, 2011
My Dell Inspiron 1525's hard drive died recently. I bought a new hard drive onine because my warranty expired. I installed the hard drive and a Windows Vista Premium operating system. I previously had Windows Vista Basic.
I tried to install all of my drivers, but neither by ethernet connection or wireless are able to connect. I ran the Intel PROset Wireless diagnostics and the hardware portions fails. The error says driver version does not support Intel PROSet/ Wireless.
The wireless card does not show up in the device manager under network adapters. I still am missing a driver for the network controller but do not know where to fnd it.
When I plug an ethernet cable into the computer directly it says no connectivity and will not light up green. why it will not connect to the internet.
View 3 Replies
View Related
Apr 24, 2012
I have a Notebook HP Pavillion DV6 3113sa with Windows 7 64-bit My Broadcom Bluetooth and Wireless Combo Card is not being detected. On device manager> Network adapters I cannot see my the wireless adapter. Realtek PCIe GBE Family controller is in the device manager though. Also I can access internet with an ethernt cable and my phone and other computer can detect my wireless router. The wireless light is also continually orange and will not change. So neither bluetooth or wireless is working. I have down loaded the 2 Broadcom drivers from the HP website but neither fix the problem. However the bluetooth driver says something like 'Driver failed to install because no bluetooth device was found'.
View 3 Replies
View Related
Apr 10, 2011
i am soon to be purchasing and installing a wireless card in my workshop pc and wondered if you could give me some pointers on which type to get etc , and any istallation tricks or problems i may come across , the sytem i have is a m621 acer running on xp pro ! i am currently running on a dongle at the moment , would a internal be benfical ? would it improve performance etc
View 2 Replies
View Related
Mar 27, 2013
We're installing a 4G wireless card (EHWIC-4G-LTE-V) in our 2911 for the first time. Upon boot-up, the IOS doesn't recognize the card (the "show inv" command doesn't list it at all). Do I need to give a command or have a certain IOS version in order for it to be recognized?
View 1 Replies
View Related
Feb 25, 2008
Dell 8400 - Vista - TWO 1GB 4200/&NBST 533MHz and TWO 512 5300 667MHz
If I install one matched pair, the wireless network is found and will connect to the network. If I install all four, the network is not found and the wireless will not connect. The network card is Netgear G PCI adapter 54MBTS 2.4GHz.
View 19 Replies
View Related
Feb 5, 2011
Recently my wirless internet stopped working. I am running a HP dv 9000 laptop. The indicator light always stays amber (instead of turning blue when turned on) on external wirless switch. The wireless adaptor should be a Broadcom 802.11b. This does not show up in device manager, but my computer says the driver for it is installed. In the device manager there is one device with a yellow question mark beside it called "other device". Under this device there are three more devices called "base system device" with a yellow exclamation point next to them
View 7 Replies
View Related
Dec 28, 2011
I am attempting to add an additional ethernet port on a Cisco 2620 router using a NM-2FE2W card, however the card is not being detected. I read that this card is compatible with this model router, but I have also notice that there is a version 2 of this card. Have I ordered the wrong card or do I possibly have a defective card? My ISO version is 12.2(26) on the router.If this card is not compatible, what is the recommended card for adding an additional ethernet port on this router?
View 2 Replies
View Related
Mar 26, 2012
I have existing cisco 2811 (Version 12.4(3c)). I try to add a HWIC serial card into the router but the new HWIC is not detected. There is no new interfece shows up when i do show run. This HWIC is a new card just bought it.
View 7 Replies
View Related
Oct 19, 2010
I bought a f3507 WWAN card on ebay which is a re-branded dell 5530 card. It is recognized in device manager on in vista on my dell latitude z600 computer but the dell drivers don't work.
View 1 Replies
View Related
Apr 20, 2012
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies
View Related
Jan 23, 2011
my network connection has not been detected suddenly....[URL]
Windows IP Configuration
Host Name................................:user
Primary Dns Suffix.......................:
Node Type..................................:Mixed
IP Routing Ensbled......................:No
WINS Proxy Enabled.....................:No
[code]....
View 1 Replies
View Related
Nov 12, 2011
a spare PC I have will not connect to the network via wireless, it is running XP Pro SP3, and is using a Xycel G-202 wireless adapter. It is seeing my Sky router, and trying to obtain an IP address, but failing every time.
I am using WPA-PSK and the key I am inputting is correct, my phone connects to the network with no problems.
View 4 Replies
View Related
Apr 28, 2011
I have had this problem now for a couple of weeks, can't seem to find a solution, even after trying all sorts of things I have seen on the web. I can not seem to get the wireless internet to work on my computer. The problem started a while ago and since then I've actually formatted my hard drive and reloaded Windows XP and everything else back onto my computer. I ahve tried connecting to the wireless at home and at work and neither is working. My computer can see the networks when but can not connect to them. I used to have no problem connecting to my home network, I have not ever connected tot he one at work, just thought I'd try it when I couldn't get it to work at home.
1. Updating my LAN driver (I've tried numerous ones and the one that works best is the one that came with my windows XP)
2. Ran both Spybot and AVG to check on spyware/malware/virus and there was not a single thing on either one.
3. Tried many combinations of setup configurations with my home wireless set up. It is a password protected hookup that I have never had problems with before.So in seeing several posts on here I have the following information from my CMD
C:>IPConfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : gateway-ta06zkr
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
[code].....
View 11 Replies
View Related
Feb 2, 2013
I have a DSL modem with wireless networking, and I am trying to install a second wireless router for a separate network. The standalone wireless network has five laptops networked to a sixth laptop, in a server/client setup. To complicate things, I am plugging the server laptop into a LAN connection on the DSL modem. The server shows both the LAN connection with internet access, and the second wireless network without internet access. The client laptops just show the wireless network, without internet access.
This is exactly what I need - internet access for the server but no access for the five clients. I have each wireless router on a separate channel and only auto connect to the standalone wireless network. Is there anything I need to do to the setup of either of the routers to avoid problems?? The wireless network without internet access seems to be abnormally slow in response and I am wondering if there is any interference between networks. None of the laptops are accessing the DSL wireless network, but I still need that DSL wireless capability for other computers in the building.
View 2 Replies
View Related
Dec 6, 2009
I'm having problems getting the WUSB54G v2 adapter work with the WRT160N router (firmware 2.0.03). I'm running Vista Home Premium SP1. My wireless network is not detected by the WUSB54G and is not on the list of wireless networks I can connect to. I'm also having trouble connecting to WUSB54GP ver 4. The network is detected, but I can't connect.
Change the Beacon Interval to 75
Change the Fragmentation Threshold to 2304
Change the RTS Threshold to 2307
Now the WUSB54GP ver 4. is working perfectly, but the WUSB54G v2 still can't detect the network. I'm also running a PS3 and a laptop, which work perfectly with the WRT160N router.Also, the WUSB54G v2 system works just fine with my old router (WRTP54G).
View 9 Replies
View Related
Dec 9, 2011
I new to the linux version of os, i had recently installed Ubuntu 10.10 on my dell laptop Inspiron 15R N5010 model. The wireless networks are getting detected in the menu. even though its working fine in wired and mobile net cases. I think that the wireless driver is missing.
View 1 Replies
View Related
Jan 20, 2012
just brought this router model #wrt120n and can't get setup disk to install because it says i have no ethernet port
View 1 Replies
View Related
Aug 28, 2012
I have a wi fi sky adapter,and when i plug it in,it says installing driver software. But..then it just hangs there,and eventually leads to-driver was not sucessfully installed(that is when i plug it out,but i waited more than an hour before that)I tried uninstaling and updating the driver for it,but it didnt worked.When i tried to uninstal the driver,again it just hanged.That is untill i unpluged the adapter..I have manually downloaded the latest driver,and when i check in properties it says that device is working properly.
View 19 Replies
View Related
Jun 13, 2011
Since yesterday evening, my Toshiba Satellite Laptop (L505D-ES5025) hasn't been able to register my wireless network, though it registered it perfectly fine yesterday morning. I can only detect the local area connection, and can only connect to the internet via the ethernet cable (which is what I'm using right now).Even when I go to the "Change Adapter Settings" from Control Panel, it won't detect the wireless network that I use. The other computers/laptops in the house work, but this one can't regiester to it, even though it's the closest to the router. When I troubleshoot the problem, the only solution is to use the ethernet cable, but I can't depend on it since the whole point of using a wireless connection is to go wireless.I have tried the Control Panel solution of going to the device manager, but I can't find the wireless network from there. This Toshiba computer also doesn't have a physical WLAN button; rather hot keys are used (though when I use this, it doesn't anyways).I also tried to find the drivers for it to update, but those won't either update, or they do update but nothing happens. In other words, I can't do anything because my laptop can't find ANY networks whatsoever except for the one that is found after I connect it to the ethernet cable.My OS is Windows 7, 64-bit Home Premium.
View 12 Replies
View Related
May 11, 2012
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
View 2 Replies
View Related
Apr 8, 2012
Both the iPod and iPhone were on the network and working and now neither is on and don't detect the network at all. Have turned off and on both devices as well as the router to no avail. My mini Mac is up and running and has been all day.
View 1 Replies
View Related
Jul 27, 2011
I am planning on installing Clean Air Wireless network, using WLC 5508, WCS(with plus license) and MSE.
Which MSE license i need to get this to work ?
View 1 Replies
View Related
Jun 7, 2013
when this error occurs
we can't see the cdp neighbor and the wireless crash.
we login onto the ap with console , we can see the error log : “Network interrupt loop detected” . last forever
View 3 Replies
View Related
Aug 14, 2012
I have a Linksys E2000 router. I am trying to install an Epson NX230 printer on my home network. Apparently, the Epson printer has a MAC address assigned to it. My network cannot find the printer. I looked at my riuter setup and the MAC Address Clone has two buttons, Enabled Disabled. The Disabled button is clicked on. Accdording to documentation I foudn on this website, it looks like I can Enabled the MAC Address clone button. The document also mentgioend entereding the MAC address for a PC.
If I enable the MAC Address Clone, do I enter the MAC address for the printer or during the install process does the MAC address get installed also
View 9 Replies
View Related
Jan 5, 2013
I have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.
View 14 Replies
View Related
Mar 19, 2013
HP G62-b12SA Notebook PC, WINDOWS 7 (64 BIT). wifi card realtek 8191se.The wired LAN is working fine. but the wi fi is not detecting any wifi network leave alone joining.the laptop was bought in UK being used in India. The wi if was working fine till about one month back.Windows couldn't automatically bind the IP protocol stack to the network adapter.
View 13 Replies
View Related
Oct 27, 2011
Network Adapter not detected my PC IBM 8123L5A any one can provide me driver software for the adapter
View 1 Replies
View Related
