Installing Second Wireless Network Separate From DSL?
Feb 2, 2013
I have a DSL modem with wireless networking, and I am trying to install a second wireless router for a separate network. The standalone wireless network has five laptops networked to a sixth laptop, in a server/client setup. To complicate things, I am plugging the server laptop into a LAN connection on the DSL modem. The server shows both the LAN connection with internet access, and the second wireless network without internet access. The client laptops just show the wireless network, without internet access.
This is exactly what I need - internet access for the server but no access for the five clients. I have each wireless router on a separate channel and only auto connect to the standalone wireless network. Is there anything I need to do to the setup of either of the routers to avoid problems?? The wireless network without internet access seems to be abnormally slow in response and I am wondering if there is any interference between networks. None of the laptops are accessing the DSL wireless network, but I still need that DSL wireless capability for other computers in the building.
View 2 Replies
ADVERTISEMENT
Apr 4, 2012
I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies
View Related
Aug 28, 2012
I have a wi fi sky adapter,and when i plug it in,it says installing driver software. But..then it just hangs there,and eventually leads to-driver was not sucessfully installed(that is when i plug it out,but i waited more than an hour before that)I tried uninstaling and updating the driver for it,but it didnt worked.When i tried to uninstal the driver,again it just hanged.That is untill i unpluged the adapter..I have manually downloaded the latest driver,and when i check in properties it says that device is working properly.
View 19 Replies
View Related
Nov 27, 2012
My wireless network card is not detected by the system and wont show up in device manager. the green light on the back of the card is still blinking, so it is getting power through the mobo. Wireless network card was working perfectly before swapping out my video card for a new 7850 and swapping out my RAM modules. The drivers are Up to date. I'm running windows 7 and the wireless network card is an atheros AR5005GS.
I don't understand why installing new RAM and a new video card would affect this?? I didn't touch that card, and have double checked it is still seated properly.
I have no other way currently to connect this computer to the Internet.
View 2 Replies
View Related
Jul 27, 2011
I am planning on installing Clean Air Wireless network, using WLC 5508, WCS(with plus license) and MSE.
Which MSE license i need to get this to work ?
View 1 Replies
View Related
Jan 14, 2013
I need to configure two VLANs in my home network to separate a server 1 with VM from another part of network with server 2 and wifi clients. Is it possible to keep DHCP server and internet access on E2500 enabled for both vlans? If so, how should I configure ports tagging (variant shown on screen shoot below doesn't work).
View 5 Replies
View Related
Aug 14, 2012
I have a Linksys E2000 router. I am trying to install an Epson NX230 printer on my home network. Apparently, the Epson printer has a MAC address assigned to it. My network cannot find the printer. I looked at my riuter setup and the MAC Address Clone has two buttons, Enabled Disabled. The Disabled button is clicked on. Accdording to documentation I foudn on this website, it looks like I can Enabled the MAC Address clone button. The document also mentgioend entereding the MAC address for a PC.
If I enable the MAC Address Clone, do I enter the MAC address for the printer or during the install process does the MAC address get installed also
View 9 Replies
View Related
Apr 2, 2013
I am looking for some information concerning network adapters. Many server vendors (HP, Dell, IBM and so on) use multiport single network adapter (one card,several ports -let's assume 4 ports). What resources are shared in multiport solution? For example:
- does multiport nic has significant limitations? For example, it's cpu cannot handle full 4-port load?
- interrupt sharing?
- buffer size?
View 3 Replies
View Related
Jan 16, 2013
My fiance recently signed up for the Screen-wise Panel for Google research. Basically they monitor your TV usage and your internet usage. As part of the program they installed a Cisco WIFI router. I've got no issue with them logging the sites visited etc but I'm a little worried about them possible collecting private information (banking / work related stuff) that I don't want going out there. According to what I've read what's supposed to happen is they replace your router with the new Cisco router.The "technician" who came in and installed the router was actually a builder and not an IT technician and rather than replace our router he connected the Cisco router into port 4 of our router... I wasn't in at the time.
What I was looking to do is separate Port 4 of my router into a separate VLAN that can access the internet, but not access anything on ports 1-3, or the wireless. However, I want to be able to see everything on port 4 from the other side (in other words I want to see "into" the port 4 VLAN, but don't want them to see out). I also wanted DHCP to assign IP addresses correctly depending on where you were plugged in. In this example the first VLAN (your current router ip address) is going to be on 192.168.1.1, and the second VLAN (the new on we create on port 4) is going to be on 192.168.2.1.This is exactly what I'm looking to do, I could then connect the kids machines / tablets / ipods to the Cisco router and have the main machine and my work laptop on the main router... but I don't have a clue how to do it. </quote> Is this something that I am able to do with the Netgear router I own and is it hard to set up?
View 1 Replies
View Related
Mar 27, 2013
i have computer A with 2 NICs.... NIC 1 has ip 192.168.x.x which has access to internet and NIC 2 10.0.x.x which as access to server files and other docs....i have computer B with ip 192.168.x.x but want to be able to access 10.0.x.x using computer A as a router is this possible and how do i go about doing that. i was thinking about bridging NIC 1 and NIC 2 adding static route on computer A and adding a second ip 10.0.x.x to computer B NIC (i know it is possible to add 2 ips on one NIC in windows) so i can have access to the file server...is what i mention possible
View 1 Replies
View Related
Feb 4, 2013
Internet connection come from an ethernet port in the wall. Cat 5 then goes to the switch and then to various computers.Desktop #1 has a IP of 10.1.1.133, sub 255.255.255.0, default gateway 10.1.1.200, DNS 10.1.1.4I want to be able to attach a cat5 cable to the LAN port of a Linksys WRT 54G going from the switch.What is the settings I need to select in the Linksys router for this to work.DHCP - Off. I guess the LAN IP of the router must fall in the range of the Main DHCP pool. Could I select anything in the 10.1.1 100's as long as another computer did not have the same IP. The starting IP of the linksys router stays in 192.168.1...... and doesn't looked like it can be changed. Does any Laptop that connects wirelessly to the linksys router need a static IP or can it obtain an IP address through
View 14 Replies
View Related
Oct 25, 2011
I have about a Netgear WGR614 router and a few CentreCom FS708 switches.Is there a way to create a home network so every safe an secure computer can access the internet and another network where I would fix machines that have virus's or machines that I don't want to access the home network.
How would I go about doing this? Or do I need a better router with DD-WRT installed on it?
View 3 Replies
View Related
Sep 14, 2011
I would like to learn how to install an OS like XP or linux over the network.
View 2 Replies
View Related
Nov 10, 2011
How can i use a router to extend the ip addresses of a separate network? I have been given a subnet mask of 255.255.255.248 which has given me 6 ip addresses to access the internet. How can i use a router to allocate extra ip addresses and route them to the internet ?
View 1 Replies
View Related
May 7, 2011
I've got a business network that I'd like to separate two sets of computers all together (thinking through a firewall rule or other method). Here's a text example of what I want to achieve:
Group A: PC 1, PC 2, PC 3 (can see each other and share files within this group)
Group B: PC 4, PC 5, PC 6 (can see each other and share files within this group)
But Group A & B can not see each other and are blocked from accessing each other.Can this be done with the DIR 655 or do I need to upgrade? Also, these two groups will be sharing the same internet connection.
View 2 Replies
View Related
Jun 13, 2012
I have a 4-port Netgear modem/router (DG834), and need to distribute its Internet connection according to the following criteria:
1.There are 11 access points (3 wired, 8 wireless) across 4 floors of a building - all cabling is from a central point, which will connect through a switch.Cat 5e cabling is in place.
2.The wireless points need Power over Ethernet connections
3.The 4 router ports serve 2 PC's and a printer in an office, the fourth being the connection to the switch.
4.There must be network separation so that:
- all points have Internet access
- there are three separate groups - one for the office, one for staff (wired) and one for guests (the wireless points), the purpose being to ensure that no user in one group can access any user's device in the other 2 groups. I'm assuming VLAN is the method for this.
5.Traffic on the network is likely to be fairly low casual use of the wireless ports, the office PC's only being used for Internet access and email no transactional systems, large databases or other resource / network-intensive functions.
1.Both the Netgear FS726TP and GS724TP look as if they will do what I want, using WNAP210 wireless access points. Could I achieve the same outcome with 2 x GS108PE switches? Any other hardware recommendations?
2.Do I need any additional hardware?
3.Are there any other considerations I have not thought of?
View 10 Replies
View Related
Feb 1, 2011
I'm in a house on a network that has 2 Macbooks, 4 notebooks running either Windows Vista or Windows 7, and 3 desktops running either Windows Vista or Windows XP. (Sidenote: No, they're not all accessing the network at the same time; actually some of them are hardly ever even turned on but it's important to include them because of the questions to follow.) Out of all those machines, one desktop running XP and one notebook running Vista are mine.Now, my family's pretty private, so we have file sharing turned off on all the computers. The problem is it's really a pain to have to transfer files between my laptop and my desktop, which I do fairly often because some of my schoolwork is done on the desktop (bigger screen), while some is done on my laptop (portability), and I also have a partition on the desktop's hard drive specifically for backing up files. When I want to transfer files, whether it's one file or 10,000 files (which I had to do the other day, actually), I either have to:
a) e-mail the file to myself if it's not too large and open it on the other machine
b)use my flash drive to transfer files
c) use a usb transfer cable, start the software, log in to the connection, etc etc.
simply create a new Workgroup on the network with just my 2 machines in it, so I can put all the files I want to share/move between them on the network instead of manually transferring them. I've already taken care of that step (creating the Workgroup, that is), so for the sake of not being confusing, I'll call my network "Network" and my workgroup "Mygroup" and whatever workgroups the other computers might be in "Theirgroups". Now that I've figured out that it's possible for Mygroup and Theirgroups to co-exist on Network, what about the actual file sharing? If I set up file sharing will only the 2 computers in Mygroup have access to them, or will the computers in Theirgroups have access as well since we're all on the same network? If the computers on Theirgroups will have access as well, is there any way I can make it so that only Mygroup will have access?
View 6 Replies
View Related
Sep 26, 2012
How do I configuring Private Class A [10.206.90.0/24] and Private Class C [192.168.1.0/24] Network on Cisco 3550-12G Switch.
View 3 Replies
View Related
Jun 8, 2012
I am playing around with a WS-C2950-24 running IOS 12.1(22)EA13. I would like to separate guest clients from domain clients on the network (for a start) so that guest clients only get access to internet and i have created three vlans for this purpose. Vlan 10 - internet, vlan 20 - internal, vlan 40 - guest. I have also set up a trunk link on the internal network.since the 2950 does not offer routing capabilities i assume i need to to the routing between these networks on another box. I am planing to do this on a linux machine. I have set up the same vlans on the linux box.
My question is how do I configure the cisco correctly so i can reach all the networks on the linux box. The cable that runs between the cisco and the linux box is connected to vlan 20 - internal and is defined as a trunk port allowing all vlans ( switchport trunk allowed vlan all ) with vlan 20 as native.it looks like only vlan 20 is using the cable that reaches the linux machine. 2950 ----- unmanaged switch (not replaced yet) ---servers
View 9 Replies
View Related
Sep 30, 2012
I've just started out playing with a Cisco 1800 router to gain some knowledge of Cisco devices before taking a CCNA. I also have a 2950 switch but will start with the router.
I'm using an Android phone as a wireless Internet access point. This issues IP addresses by DHCP in the 192.168.43.x range with 255.255.255.0 subnet.
Also I have a Linksys WRT54G router running DD-WRT firmware acting as a wireless bridge to the Android phone, and it has 4 LAN ports.
This bridge is up and running and I have successfully connected my laptop to the Linksys for testing and can use the Internet provided by the phone.
Connected to the Linksys is a Cisco 1800 router. Connected to the router is my Citrix XenServer PC and a NAS box.
The XenServer and NAS are on another network 07.05.19.x range with 255.0.0.0 subnet using their own static IPs. One of the virtual clients on the XenServer will be a DHCP server to service other virtual clients. All still in the 07.05.19.x range.
Basically I want the devices on the 07.05.19.x IP range to be able to use the Internet gateway at 192.168.43.1 to access the Internet.
How would I set up my 1800 to achieve this?
Also, am I right in understanding that the 1800 will ignore DHCP leases from the Android phone due to it being a Layer 3 device.
View 4 Replies
View Related
Nov 25, 2011
I have a standard home network consisting of internet access provided by my cable company which is then disseminated to a variety of wired and wireless devices via a router.
I would like to create a second wireless network that is separate from my current one. This new wireless network would have extra access controls including access restrictions to some web sites using both IP address restrictions and using the OpenDNS DNS servers.
The picture below illustrates the current configuration. The question is: how can I connect ROUTER B to the internet using my current equipment (without buying another IP address from the cable company)?
W
MODEM --> ROUTER A --> ANTENNA <------> COMP 3
1 2 3 4
| |
| |
COMP 1 <---' | W
| ?? <--> ROUTER B --> ANTENNA <---> COMP 4
COMP 2 <-----' 1 2 3 4
W = WAN port
So, in the above picture, COMP 4 is connected via wireless to this second network and cannot access anything on the first network and uses different different DNS servers.
In case it matters, ROUTER A is a Linksys WRT54GL while ROUTER B is a D-Link DI-624.
View 1 Replies
View Related
May 23, 2012
I bought a new router last night in an attempt to fix some internet issues. I replaced my old router (an N150 lynksis) with the one I bought (an N300 netgear) and after getting all the wires connected, my computer wouldn't connect to the internet and it wouldnt recognize the router as anything other than "Unidentified Network". I've tried reseting and power cycling the modem, shuting down the computer, even some random tips from the internet but nothing seems to be working.
View 1 Replies
View Related
Feb 13, 2012
Currently we have an Ava ya IP Office switch running on the same network as our PC clients. I would like to seperate the two network into 2 V LAN's.
We have a mixture of Catalyst 3750 switches and some older 3500 models.Where do I start? Should I leave the PC's and servers on the default V LAN and just move the IP handsets?
View 6 Replies
View Related
Mar 9, 2013
I have one of my customer have cisco 2951 Router with two ISP and two ADSL module .i already configure one ADSL module.rit now customer want secondISP ( ADSL) module configuration separate netwok because customer have Access pont they want connect directly to router is it possible
1st ISP already running but customer requirement 2nd ISP superate network with Access pont not redundancy
View 5 Replies
View Related
Jul 12, 2011
Is it possible to partition the hard disk after installing the Windows OS?
View 9 Replies
View Related
Feb 25, 2013
I have been asked to install a ASA5505 on a home network. The home network has a home broadband connection which the ISP provider supplies with an IP address. This is only for 6 weeks until the new line comes in. I know this is going to cause problems but we have no choice but to impletment this.
My questions are below.
1, We have a home hub supplied by the ISP which is configured by an IP address which is NOT static. Can we not use the ASA 5505 instead. I know that if our ISP change the IP address we have to change the IP address on the 5505.
2, Will we be able to use the home network broadband to create a secure connection?
View 1 Replies
View Related
May 21, 2012
I am using a 6500 with FWSM. I need to separate an internal server/HQ network from 3 or 4 different external connections. The external networks do not necessarily need to be isolated from each other.I have the option of using a 3 layer model: L2 Access layer to SVIs on the Distribution layer and then L3 to the 6500.L2 Access, connecting directly to the 6500s, with the SVIs on the FWSM.Is it better to have the FWSM outside the MSFC or Inside? Am i correct in thinking that "inside" vs "outside" is determined by whether the SVI's are configured on the FWSM or the MSFC? is there any performance impact from having the FWSM doing the routing instead of the MSFC.If the vlans are all configured on the FWSM, what is the 6500 doing, other than providing switch ports?
View 1 Replies
View Related
Feb 2, 2012
I have to configure failover Active/Standby on my ASA 5510.I am wondering how i could do for the outside interface, i mean, actually the ASA1 outside interface is linked directly to our Internet router.So now if i have to add ASA2 connecting to that router i will need a switch between them.I have already a switch for DMZ & LAN.The thing is that i will have to allow 3 switchs ports to communicate with each others.
- 1 for ASA1--outside
- 1 for ASA2--outside
- 1 for Internet router
How could i isolate these 3 ports to make them communicate alone ? Should i use VLAN for that ?And if i use VLAN, will this require to make any change of configuration on my firewalls (ASA1 & ASA2) outside interface ?I am a bit lost with this, if i am correct i will not have to do some "vlan tagging" on the firewall itself ?
View 1 Replies
View Related
Aug 10, 2011
I have a Inspiron n5110 laptop and recently re-installed Windows 7.After using the "Driver & Utilities" disc to update the drivers. I haven't been able to connect to the internet
I was able to retrieve my system information and got the following;
Network Card(s): 3 NIC(s) Installed. [01]: Bluetooth Device (Personal Area Network) Connection Name: Bluetooth Network Connection Status: Media disconnected [02]: Realtek PCIe FE Family Controller Connection Name: Local Area Connection Status: Media disconnected
View 4 Replies
View Related
Oct 9, 2012
How to get wireless to a separate location from the house.I have the virgin media home hub in the house and I have a cabin out the back roughly 20m away which I require wireless to run in...i need the wireless for a ps3, mac mini, mac-book, ipad and other little wireless gadgets.I have tried using the devolo dLan 200 AV wireless n starter kit with very limited success. short of actually running an Ethernet cable along the ground and using an Ethernet switch is there anything else i can do? or are there better products with a bigger/better range than the devolo that would do the job?
View 1 Replies
View Related
Mar 3, 2011
Can I have 2 routers and make 2 separate wireless signals? Reason being I need one so that I can keep net blacks for my little brother but I would like my net not to have any restrictions.
View 1 Replies
View Related
Sep 3, 2012
I currently have a Linksys WCG200 wireless gateway cable modem. The computers in my office are connected to it via ethernet cables and I use the wireless signal in the rest of the house for my laptop and guests. I'm (still) using Win XP Pro on all the computers.I'm about to start a work at home job doing customer service and I am not allowed to have a wireless network that might broadcast customer information, so I need to be able to prevent that from happening. I'm assuming I'll need two separate networks?All computers need internet access and if it's possible I would still like to be able to share files between the two networks (assuming I need 2 different networks), but it's not the end of the world if I can't do that.
View 4 Replies
View Related
Mar 10, 2013
My first Rooter provides Broadband via a cable connection.Is it possible too add a second rooter too the first one and set the second one for WI-FI or is their a better way too get my Kindle WI-FI connected.
View 2 Replies
View Related
