i am soon to be purchasing and installing a wireless card in my workshop pc and wondered if you could give me some pointers on which type to get etc , and any istallation tricks or problems i may come across , the sytem i have is a m621 acer running on xp pro ! i am currently running on a dongle at the moment , would a internal be benfical ? would it improve performance etc
View 2 RepliesWe're installing a 4G wireless card (EHWIC-4G-LTE-V) in our 2911 for the first time. Upon boot-up, the IOS doesn't recognize the card (the "show inv" command doesn't list it at all). Do I need to give a command or have a certain IOS version in order for it to be recognized?
View 1 Replies View RelatedMy wireless network card is not detected by the system and wont show up in device manager. the green light on the back of the card is still blinking, so it is getting power through the mobo. Wireless network card was working perfectly before swapping out my video card for a new 7850 and swapping out my RAM modules. The drivers are Up to date. I'm running windows 7 and the wireless network card is an atheros AR5005GS.
I don't understand why installing new RAM and a new video card would affect this?? I didn't touch that card, and have double checked it is still seated properly.
I have no other way currently to connect this computer to the Internet.
Dell 8400 - Vista - TWO 1GB 4200/&NBST 533MHz and TWO 512 5300 667MHz
If I install one matched pair, the wireless network is found and will connect to the network. If I install all four, the network is not found and the wireless will not connect. The network card is Netgear G PCI adapter 54MBTS 2.4GHz.
how do i install my mail client properly , my laptop is a acer aspire 5332
View 1 Replies View RelatedTrouble is, it's not finding the wifi at all.
It an Acer M3910 running Windows 7.
C:Usersdesktop>ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.<numbers in here>:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.<numbers in here>:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
I can't have a wired connection as the router is too far away.Every other device hook up fine to WiFi. Just this one is completely refusing.
I bought a f3507 WWAN card on ebay which is a re-branded dell 5530 card. It is recognized in device manager on in vista on my dell latitude z600 computer but the dell drivers don't work.
View 1 Replies View RelatedSo I just finished installing ClearOS and configuring my network, but I can't figure out how to get it to boot without the video card. It's currently running with a 4870, but I want to take it out for the power savings.My motherboard is an ASUS P5Q-E and I haven't really found any information on how to do this or if it is even possible
View 12 Replies View RelatedWe have open a division in the UK and are using DSL as a back up to a T1-E1, so I was going to use a standard DSL Modem but thought the WiC-1ADSL-I-DG would be better. However I can seem to get the card up and running. Here is the interface config and sh int atm.
interface ATM0/1/0
ip address dhcp
ip access-group 102 in
ip inspect SDM_LOW out
[code]....
That's part of the sh int amt.
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View RelatedI have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies View RelatedI need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies View RelatedI FORMATED THE HARDRIVE AND REINSTALED XP NOW NO INTERNET AND NO AUDO I USING A LATUDE LAPTOP
View 1 Replies View RelatedI have a DSL modem with wireless networking, and I am trying to install a second wireless router for a separate network. The standalone wireless network has five laptops networked to a sixth laptop, in a server/client setup. To complicate things, I am plugging the server laptop into a LAN connection on the DSL modem. The server shows both the LAN connection with internet access, and the second wireless network without internet access. The client laptops just show the wireless network, without internet access.
This is exactly what I need - internet access for the server but no access for the five clients. I have each wireless router on a separate channel and only auto connect to the standalone wireless network. Is there anything I need to do to the setup of either of the routers to avoid problems?? The wireless network without internet access seems to be abnormally slow in response and I am wondering if there is any interference between networks. None of the laptops are accessing the DSL wireless network, but I still need that DSL wireless capability for other computers in the building.
Intalled a new router (Linksys Cloud 1200) yesterday. Immediately after that the 2 computers that were connected to the network could no longer access the internet. My laptop and my ipad can access the internet wirelessly. The laptop which was not connected to the network when I connected the router can access the network both wirelessly and wired. Printers attached to the network will print without a problem.Finally I took an old computer out of storage (running WinXP) and hooked it up to the wired network. It too has no problems accessing the network. So have to assume the issue is a software issue with the two computers that were hooked up to the network when I changed the router.I have read the posts here - I did a stack reset on one of the computers but no luck. I removed Norton 360 and Team Viewer which in other posts people said they had issues with...to no avail.
Since I dont have a wireless connection to the 2 computers that cannot access the internet - I cannot download TSG SysInfo. However here I did copy the ipconfig lines below from the desktop thats not responding. [code] Was working fine until I replaced the router. I tried going back to the oldrouter (Netgear) same issue - no wired internet connectivity.
We have cisco 1941 as router in office, it's dhcp server, it has only vlan 1 192.168.4.0/24?I've set up 1142 ap for wireless clients How can i make it give clients ips from dhcp server from vlan 1 ?
View 11 Replies View RelatedI've got an MSE 3310 that came with four-post rails for rack mounting. These came without instructions and we are having a hard time figuring out exactly how they work. They say General Devices C-300-S-124-RC-MOD
View 4 Replies View RelatedI have a wi fi sky adapter,and when i plug it in,it says installing driver software. But..then it just hangs there,and eventually leads to-driver was not sucessfully installed(that is when i plug it out,but i waited more than an hour before that)I tried uninstaling and updating the driver for it,but it didnt worked.When i tried to uninstal the driver,again it just hanged.That is untill i unpluged the adapter..I have manually downloaded the latest driver,and when i check in properties it says that device is working properly.
View 19 Replies View RelatedThe BT Infinity Hub (fibre optics to the cabinet one) plugs into a router and I tried connecting via ethernet cable to both without result, still no set up page from [URL] either with wi-fi off or with wi-fi on in the "Currently connected to:" window.
View 1 Replies View RelatedI am trying to instal my Netgear router. It is asking for the Preferred DNS name and the alternate DNS name? I got the IP address and the other required fields but I'm not sure about eh DNS thing?
View 2 Replies View RelatedI've been trying to install our rwireless Hp printer on my laptop. I've had it installed and working, but then it goes offline and won't print. I've uninstalled and reinstalled to no avail. Now it has the error symbol on it (yellow circle withan exclamation mark)
View 4 Replies View RelatedI recently had to reformat, and I tried to re-install my E1000 Wireless N router from the CD. Even after entering my network name and password, it said it was unable to connect to my network. My internet works fine - I just can't make my computer in control of it again. I have several devices connected wirelessly, including an Ipad, and they all get internet fine. how to get the program installed so I can change settings again?
View 1 Replies View Relatedgetting ready to do the install of a EA4500 with a Cable internet provider. I found the site on Cisco on how to manually install the router with Cable [URL]It advises to first install using the software that comes with the router.It then gives the following steps:
Step 1:Access the router’s web-based setup page. For instructions, click here.NOTE: If you are using a Mac computer to access the router’s web-based setup page, click here.
Step 2:On the Setup tab, click the MAC Address Clone sub-tab.Step 2:Check the Internet IP Address. If it has numbers, this means the router has been properly configured.
NOTE: If the Internet IP Address values are showing up 0.0.0.0, click on Release IP Address then the Renew IP Address buttons.NOTE: For wireless-B and wireless-G routers, click on the DHCP Release and DHCP Renew buttons. MY QUESTION: are the steps above something that definately will need to be done or is that in the case that it's not configured via the installation using the software?I have this same router installed at my home however I use DSL internet and my daughter uses Cable internet so I want to make sure I am positive on the steps prior to installing.
I wait on Dell and other vendors to start pumping out Win 8 certified hardware, I have been running the Win 8 CP on my ST slate since February. With the release of RP this weekend I readily upgraded. Now i was able to get all functionality working previuosly but am now running into an issue with the wireless/BT card driver. Seems Microsoft sees the BT part of the Dell 1535C mini card but will not allow the wireless driver to load.
View 15 Replies View Relatedinstall AP1042N access points?
Situation: I have a store where there is already installed an AP1042N. In the back of the building there is no wireless signal. I want to install a second access point to extend my range;
I am running an ASUS laptop with Windows 7. My wireless has been working fine, but my room is quite far from the router, so I bought a signal-booster USB aerial made by Realtek (REALTEK 11n USB Wireless LAN Driver and Utility). It came with a small software CD too which I installed, and it worked fine for two days and boosted my wireless signal.However (you knew it was coming, the story can't stay happy) soon the red light on the USB booster stopped blinking and it showed the red 'x' where my wifi connections are. I couldn't get it to re-establish a connection without doing a full system restore and re-installing the USB signal booster, which would then work again for a short amount of time (maybe a day, maybe an hour). And worse, now when the USB booster is unplugged from the computer my laptop will not return to recognising wireless connections like it did before I installed the USB signal booster. It simply does not find any connections - the only time it does is directly after I have re-installed the software from the small disc which came with the Realtek USB signal booster.
I have now uninstalled the Software and anything made by Realtek but still it is finding no connections.Now I would just like to find a way to get back to where I started when my computer was finding all wireless connections like normal... a connection with a weak signal is better than this nightmare of constantly restoring my computer just to get a brief connection
I have installed a SumvisionSWV322P Wireless PCI Adapter in to my desktop and have configured it to run on my existing home network: I can connect no problem but after about 10 mins my whole desktop just locks up: The only way I can get out of this is by re-booting by turning the machine off completely by the on/off button. My OS is Windows XP Professional version 2002 SP3:
View 1 Replies View RelatedI just got a new E4200 router and downloaded Cisco Connect from the web site...file name CiscoConnect.E4200.1.4.11160.2.exe. When I try to run it, I find through Task Manager that Setup.exe is using about 35 to 40% CPU, but I'm never even getting to anything on the screen, nor is Task Manager even showing it as a running application. I'm running Windows XP SP3 (latest updates). I tuned off the AVG virus scan. But it still just seems to hang. BTW, I used the web interface to fully configure the router and it works fine so I could get by without Cisco Connect, but it might just be easier to use.
View 4 Replies View RelatedI don't know how to install this driver - I didn't see a .exe file or a "setup" icon
View 9 Replies View RelatedStarted a fresh installation on windows 7 RC 64 bit popped in adapter, and tried installing disk, disk would get the portion where it asked to input the adapter, then just vanish after i click next. I restarted, nothing. I clicked set up again, says drivers are already installed....though there is no app to show profiles, im guessing it isn't.
[URL]
version 1.00 would work just like the disk. version 2.00 would not start at all and would give an "the application was unable to start correctly (0x0000005).."
I have my brand new WUSB54GC and I can't install it. My operating system is Windows Me and every program on the CD accompanying my new adapter tells me "This version of Windows won't work" or words to that effect. My machine realizes something is there--indeed it knows there is a Linksys wireless adapter and even tells me it was manufactured by Cisco Co.--but it says NDIS cannot load the driver. Do I need a different driver?
View 6 Replies View RelatedI have tried running all versions of the setup program that came with the adapter. Even when I ran the compatibility program I still get error 211 adapter not recognized. When I looked in the device manager the adapter is listed but with problems. Under properties it shows windows cannot load the drivers required for this device error 31. I also tried updating the drivers from the device manager using the ones I downloaded directly from linksys website. The ones for the 64 bit windows 7?
View 9 Replies View RelatedI am planning on installing Clean Air Wireless network, using WLC 5508, WCS(with plus license) and MSE.
Which MSE license i need to get this to work ?