Broadband - No Network Adapter Detected
Dec 21, 2011
i have a problem with my network adapter. i have successfully reformatted our desktop computer. I was able to connect to the internet for a week but after that, when i tried to connect again, it says that i do not have any network adapter and that i should install one. i tried to look at my device manager, there was no network adapter in my devices. i tried to install a realtek adapter but still nothing happened. i even tried reinstalling my os but it wont read by dvd. also, i have a laptop, but the internet connection is working properly there.
View 3 Replies
ADVERTISEMENT
Oct 27, 2011
Network Adapter not detected my PC IBM 8123L5A any one can provide me driver software for the adapter
View 1 Replies
View Related
Dec 27, 2011
After adding Microsoft Windows 7 and thinking the system would work just fine, the error message we get says "no network adapter detected". We have an onboard Gigabit LAN network, but not sure if I also need some sort of network adapter to complete the set up.
View 2 Replies
View Related
Aug 25, 2012
I could not boot the other day so I spent a few hour pulling everything out and checking memory components,etc.m taking the battery out finally fixed the boot issue but now there is no Internet or network detected or network adapter. It is not the router because pc in the other room is working fine on same connection. Mseems like a CMOS or bios issue. There was a message before boot about reverting to default bios settings. I can't update or remove driver because it is not detected and no Internet.
View 10 Replies
View Related
Mar 20, 2011
i reinstall my computer today, and i can't connected to the internet.also, i can't find newtork adapters in the device manager section.something must wrong, i just don't know what's wrong.
View 2 Replies
View Related
Dec 12, 2011
i have a home computer. windows xp. i have a virgin mobile broadband chip that i have always been able to plug n to the usb slot on bck of computer and it pulls up the internet with no problems. i tried to get on the internet and it keeps telling me that the device isnt detected. i troubleshot,lol. and windows tells me to go to control panel, network connections, LAN or high-speed internet, the problem is i only see 3 g and local internet connection?
View 12 Replies
View Related
Jan 21, 2013
802.11n wireless adapter not being detected by the system
View 1 Replies
View Related
Apr 24, 2012
I have a Notebook HP Pavillion DV6 3113sa with Windows 7 64-bit My Broadcom Bluetooth and Wireless Combo Card is not being detected. On device manager> Network adapters I cannot see my the wireless adapter. Realtek PCIe GBE Family controller is in the device manager though. Also I can access internet with an ethernt cable and my phone and other computer can detect my wireless router. The wireless light is also continually orange and will not change. So neither bluetooth or wireless is working. I have down loaded the 2 Broadcom drivers from the HP website but neither fix the problem. However the bluetooth driver says something like 'Driver failed to install because no bluetooth device was found'.
View 3 Replies
View Related
Mar 13, 2011
I've got a bit of an issue. A friend of mine has recently gotten windows 7 installed into his desktop. When he tried to install the network adapter (wusb11 version 2.8), it installed. However, when we searched for it in the device manager, it did not appear. does Version 2.8 only cover up to Windows XP or is there software to make it work for Windows 7?
View 3 Replies
View Related
Mar 24, 2011
I recently upgraded my computer (not laptop) from Windows XP to Windows 7-32 bit. I redownloaded and installed Network Magic, Linksys Wireless Manager and my WUSB600N adapter properly (I hope). Now everything was working fine, I was able to get onto my network through the adapter but today I noticed that the Linksys Wireless Manager seemed to not connect to my network, instead my computer some how did it without the wireless manager. Now when I tried to connect to a network through the Wireless Manager it said Error: 211 and said My Adapter may not be installed properly and told me to remove the adapter and attach it back after 20 seconds. I tried that but again my computer connected to the network STILL through the computers own manager not through the Linksys Wireless Manager. That was still saying Error 211. So the problem really is that the Linksys Wireless Manager wont detect my adapter but my computer is still able to detect it and connect to my network.
View 4 Replies
View Related
Nov 5, 2011
I have a XPS 15 (502x). It has the above adapter installed but when I insert my sim card it says no network available.
I use the same sim card in a USB modem and it works fine.
View 3 Replies
View Related
Mar 10, 2011
My pc has a on board ethernet adaptor that stopped working all of sudden... I have no idea about what to do... I tried to check if there were any problem with a driver or something but the nic isn't even detected by the pc..
View 1 Replies
View Related
Mar 1, 2011
Ethernet stop working, but the wireless is fine, check in the device manger for any conflics none. open the network sharing centre and ran the truoble shooting utiiity and message came up with ethernet cable not plug in or brocken, which i have change it for a new one so its not the cable and its not the routor because B.T just gave me the new B.T Hub3, this network adaptor is on board and i have a wireless card in the PCI slot and the is a new main board which i built, everything was fine afew months ago til this started to acur
View 4 Replies
View Related
Dec 6, 2012
I have two computers, one is a Dell Dimension 8300 while the other is a Compaq Presario Desktop. Both use Microsoft Windows XP OS 32 bit and are networked using a Microsoft Wireless G-Base Station MN-700 on the Dell and a Wireless G-Adapter on the Compaq. This arrangement worked quite well for some time and recently they stopped communicating with each other. I reset the base station as described in the manual. When I did the same for the Adapter I could not enter the correct Wireless Security Key. I tried copying the key from the Base to the adapter but to no avail. Do I have to uninstall both units from their respective computers and reinstall from the CD provided?
View 7 Replies
View Related
Mar 19, 2013
HP G62-b12SA Notebook PC, WINDOWS 7 (64 BIT). wifi card realtek 8191se.The wired LAN is working fine. but the wi fi is not detecting any wifi network leave alone joining.the laptop was bought in UK being used in India. The wi if was working fine till about one month back.Windows couldn't automatically bind the IP protocol stack to the network adapter.
View 13 Replies
View Related
Jan 23, 2011
my network connection has not been detected suddenly....[URL]
Windows IP Configuration
Host Name................................:user
Primary Dns Suffix.......................:
Node Type..................................:Mixed
IP Routing Ensbled......................:No
WINS Proxy Enabled.....................:No
[code]....
View 1 Replies
View Related
Nov 12, 2011
a spare PC I have will not connect to the network via wireless, it is running XP Pro SP3, and is using a Xycel G-202 wireless adapter. It is seeing my Sky router, and trying to obtain an IP address, but failing every time.
I am using WPA-PSK and the key I am inputting is correct, my phone connects to the network with no problems.
View 4 Replies
View Related
Apr 28, 2011
I have had this problem now for a couple of weeks, can't seem to find a solution, even after trying all sorts of things I have seen on the web. I can not seem to get the wireless internet to work on my computer. The problem started a while ago and since then I've actually formatted my hard drive and reloaded Windows XP and everything else back onto my computer. I ahve tried connecting to the wireless at home and at work and neither is working. My computer can see the networks when but can not connect to them. I used to have no problem connecting to my home network, I have not ever connected tot he one at work, just thought I'd try it when I couldn't get it to work at home.
1. Updating my LAN driver (I've tried numerous ones and the one that works best is the one that came with my windows XP)
2. Ran both Spybot and AVG to check on spyware/malware/virus and there was not a single thing on either one.
3. Tried many combinations of setup configurations with my home wireless set up. It is a password protected hookup that I have never had problems with before.So in seeing several posts on here I have the following information from my CMD
C:>IPConfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : gateway-ta06zkr
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
[code].....
View 11 Replies
View Related
Jun 2, 2012
Recently I dual-booted my PC from Windows XP(On which the LAN card was working and i was able to access the internet) to Windows 7.Then i formated the drive on which WinXP was installed. Sometime later i noticed that the LAN card (Atheros A8151 PCI-E Ethernet Controller) was not working i went into the adapter settings in network control in the control panel and there was no adapter. i checked the device manager and there was no option called NETWORK ADAPTERS.
View 14 Replies
View Related
Nov 21, 2012
We a Q77 based Jetway JNF9E motherboard, and when we added a TP-Link PCIe network card it was not detected in device manager in windows XP. We tried a Dynamode card with a different chipset and that was also not detected. We then tried a PCIe Firewire card, and that was fine, indicating that the slot itself was OK.We then tried installing Windows 7-64, and that also failed to see either card. We updated the BIOS to the latest version, which had no effect. We then tried another PC with the same motherboard and that also showed the same problem. A USB network adaptor does work, but is not an ideal solution due to space contraints.
View 3 Replies
View Related
Jan 17, 2011
basically i have a desktop computer which i hook up directly to the router , anyway its coming up as an un identified network on network and sharing area , and when i select "connect to a network it only shows a PPoE Connection . I tried replugging the ethernet cable and it comes up an error message "windows has detected an IP address conflct"
View 14 Replies
View Related
May 26, 2011
I have a HP Pavilion dv6000 with windows xp. A couple of days ago the computer couldn't find any wireless connections. I've been into devmgmt.msc and looked, but I don't see any network card. In the folder Network Connections there are three alternatives, and none are wireless...I've tried to download the drivers for chipset, modem and network, but I still can't find anything.
View 1 Replies
View Related
Sep 9, 2012
I have purchased Netgear WNDR3700 v3 dual band router. I have set up the router according to all the settings. I tried to access wifi through my ACER 5734z Laptop.....But all i can see is only the 2.4 Ghz signal and no 5ghz signal. My wireless adapter is BROADCOM 802.11 Driver ver. 5.60.48.35
and let me know whether my laptop supports 5ghz signal
View 1 Replies
View Related
Dec 6, 2009
I'm having problems getting the WUSB54G v2 adapter work with the WRT160N router (firmware 2.0.03). I'm running Vista Home Premium SP1. My wireless network is not detected by the WUSB54G and is not on the list of wireless networks I can connect to. I'm also having trouble connecting to WUSB54GP ver 4. The network is detected, but I can't connect.
Change the Beacon Interval to 75
Change the Fragmentation Threshold to 2304
Change the RTS Threshold to 2307
Now the WUSB54GP ver 4. is working perfectly, but the WUSB54G v2 still can't detect the network. I'm also running a PS3 and a laptop, which work perfectly with the WRT160N router.Also, the WUSB54G v2 system works just fine with my old router (WRTP54G).
View 9 Replies
View Related
Nov 5, 2012
LED is solid red (front) and solid blue (rear). try resetting thru the pinhole button but problem still the same. Camera not detected anymore on my network. I've try switching on and off, problem still there.
View 4 Replies
View Related
Dec 9, 2011
I new to the linux version of os, i had recently installed Ubuntu 10.10 on my dell laptop Inspiron 15R N5010 model. The wireless networks are getting detected in the menu. even though its working fine in wired and mobile net cases. I think that the wireless driver is missing.
View 1 Replies
View Related
Nov 27, 2012
My wireless network card is not detected by the system and wont show up in device manager. the green light on the back of the card is still blinking, so it is getting power through the mobo. Wireless network card was working perfectly before swapping out my video card for a new 7850 and swapping out my RAM modules. The drivers are Up to date. I'm running windows 7 and the wireless network card is an atheros AR5005GS.
I don't understand why installing new RAM and a new video card would affect this?? I didn't touch that card, and have double checked it is still seated properly.
I have no other way currently to connect this computer to the Internet.
View 2 Replies
View Related
Jan 20, 2012
just brought this router model #wrt120n and can't get setup disk to install because it says i have no ethernet port
View 1 Replies
View Related
Jun 13, 2011
Since yesterday evening, my Toshiba Satellite Laptop (L505D-ES5025) hasn't been able to register my wireless network, though it registered it perfectly fine yesterday morning. I can only detect the local area connection, and can only connect to the internet via the ethernet cable (which is what I'm using right now).Even when I go to the "Change Adapter Settings" from Control Panel, it won't detect the wireless network that I use. The other computers/laptops in the house work, but this one can't regiester to it, even though it's the closest to the router. When I troubleshoot the problem, the only solution is to use the ethernet cable, but I can't depend on it since the whole point of using a wireless connection is to go wireless.I have tried the Control Panel solution of going to the device manager, but I can't find the wireless network from there. This Toshiba computer also doesn't have a physical WLAN button; rather hot keys are used (though when I use this, it doesn't anyways).I also tried to find the drivers for it to update, but those won't either update, or they do update but nothing happens. In other words, I can't do anything because my laptop can't find ANY networks whatsoever except for the one that is found after I connect it to the ethernet cable.My OS is Windows 7, 64-bit Home Premium.
View 12 Replies
View Related
May 11, 2012
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
View 2 Replies
View Related
Apr 8, 2012
Both the iPod and iPhone were on the network and working and now neither is on and don't detect the network at all. Have turned off and on both devices as well as the router to no avail. My mini Mac is up and running and has been all day.
View 1 Replies
View Related
Jun 7, 2013
when this error occurs
we can't see the cdp neighbor and the wireless crash.
we login onto the ap with console , we can see the error log : “Network interrupt loop detected” . last forever
View 3 Replies
View Related
Jan 5, 2013
I have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.
View 14 Replies
View Related