G-Base Station MN-700 / G-Adapter On The Compaq Microsoft Broadband Networking Won't Communicate
Dec 6, 2012
I have two computers, one is a Dell Dimension 8300 while the other is a Compaq Presario Desktop. Both use Microsoft Windows XP OS 32 bit and are networked using a Microsoft Wireless G-Base Station MN-700 on the Dell and a Wireless G-Adapter on the Compaq. This arrangement worked quite well for some time and recently they stopped communicating with each other. I reset the base station as described in the manual. When I did the same for the Adapter I could not enter the correct Wireless Security Key. I tried copying the key from the Base to the adapter but to no avail. Do I have to uninstall both units from their respective computers and reinstall from the CD provided?
View 7 Replies
ADVERTISEMENT
Aug 23, 2012
Can I connect 2 or more wireless repeaters to the same wireless base station signal to extend wireless coverage? I.e. The base station is located in the centre of the building and the signal covers the middle but not the extreme end of the building. I would like to add a repeater on each opposite sides of the signal's reach so it covers the complete building. I can't use LAN cable and the building has different electricity supply to the 3 different part of the building so can't use the mains to carry the signal. Is this possible using wirless repeaters or do I have to use wireless bridge units to connect to the base station and then output with wireless access points attached to the bridge unit to extend the wirless signal?
View 6 Replies
View Related
May 20, 2011
I was wondering if it is at all possible to set up a DIR-655 as a wireless base station for any router (specifically a netgear wrg614 v10). I've read that the DIR-655 can be set up as an access point, but with my current situation it's not currently possible.If this is not compatible with this specific netgear router, is there any other solution besides having to purchase a dedicated access point?
View 3 Replies
View Related
Oct 20, 2012
I would like to use my new EA6500 as the base station and another wireless router with Wireless Repeating Function as a repeater. Is the EA6500 capable of that?? I have not found any documentation on that subject.
View 6 Replies
View Related
Mar 23, 2011
I have an issue with my girlfriend's Compaq Presario A900. We have recently had a new Wireless router and the laptop was working fine going online then one day it wouldn't connect.The laptop is connecting to the router although it is showing as an unidentified network and access as local only. All other PC's and laptops in the house are connecting fine and using the internet.I have see this question asked on other forums but as i mentioned i'm not very tech savvy and i can't seem to get anything to work.
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Usersgemma>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : gemma-PC
Primary Dns Suffix . . . . . . . :
[code]...
View 7 Replies
View Related
Dec 5, 2011
I want to setup a lap environment for my studies using Microsoft Virtual pc. I have installed 3 virtual pc of which 2 are windows server 2008 named srv1 and srv2, the third virtual pc is running windows XP professional services pack 2 with the host operating system being windows 7.I have installed Microsoft loop-back adapter and i am trying to network the 3 virtual pc and the host.
srv1 ip address is 192.168.2.200
srv2 ip address is 192.168.2.201
wk1 ip address is 192.168.2.10
host pc's ip addresss for the loopback adaptor is 192.168.2.5 when i check the workgroup i see only srv1 and srv2 i am only able to ping srv1 and svr2, the rest are unreachable.
View 4 Replies
View Related
Dec 26, 2011
I cannot access any microsoft websites except when in safe mode + networking. I can browse all other websites just fine, but can only access any microsoft sites in safe mode.
View 3 Replies
View Related
Oct 19, 2011
I can't seem to connect to any wifi. I opened my device manager and looked under network adapters ant there is a little triangle with a ! in it. What can I do to fix this???? I'm a college student who needs access to the internet badly
View 14 Replies
View Related
Feb 22, 2011
ok so my moms computer (compaq fs7600) had vista an it went nuts so i wiped it an installed xp pro. Everything went fine but now it wont connect to the internet =/. I have a Belkin Wireless router and an Arris high speed modem from Brighthouse. When i checked the cmd prompt it said that the media is disconnected an network connections said that it was unplugged, but everything is plugged in
View 3 Replies
View Related
Jun 5, 2011
after purchasing a 11yr.old compaq presario 1200 from the swap shop,I was told by the seller,I would need usb ethernet adapter.I bought the adapter,but still can'get the internet.
View 1 Replies
View Related
Jun 14, 2012
I have a HP Compaq Evo N610c with external 54Mbps External wireless adapter, is it possible to fit an internal wireless adapter?
View 3 Replies
View Related
Sep 29, 2011
Just purchased an Asus K532-BBR9 laptop. Everything works fine, except on college campus the internet is very slow, and disconnects every few minutes.My fellow students laptops do not seem to have this problem.I figured it may be a driver issue, so I am trying to update everything.Under Network Adapters in Device Manager. The Microsoft Virtual WiFI Miniport Adapter is not up to date when I do a driver update scan.Then it says "Windows can't verify the publisher of this driver software.." with options to install anyways.
View 2 Replies
View Related
Feb 12, 2011
have had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.
View 2 Replies
View Related
Feb 6, 2012
My wireless on my computer won't hold a connection for any longer than 30 minutes. I've checked the drivers, the wireless router, and scanned for viruses (several times) but nothing seems to work. In the last three months, I think I only had one occasion where the connection remained stable for longer than an hour. It doesn't matter what router I use or where I am. It has to be my computer.
I have a Compaq Presario CQ57 and I have had it for about 6 months.
View 1 Replies
View Related
Nov 29, 2011
I have a compaq presario V6500 laptop running windows vista SP2. For the past few days i am not able to connect to the internet using ethernet port. But my wireless still works.On checking device manager, my network adapter, a nVidia nForce networking controller#2, gives the following error.
View 14 Replies
View Related
Jan 28, 2011
Just restarted my Inspiron 1521 and what i see is NO Connection icon.Device manager does not show Dell and Microsoft adapter.
View 2 Replies
View Related
Mar 22, 2011
I have a DWA-547 wireless adapter in my PC and only get 1 to 2 bars....I was thinking about getting another wireless adapter or getting wireless antennas to boost the signal if it works?
View 3 Replies
View Related
Nov 4, 2012
I have an 802.11n USB Wireless Lan card on a desktop with Windows 7 home premium 64-bit. Whenever im searching the web, say i go to NFL.Com to check my fantasy squad, the pages wont load, and i see my connection has been dropped, now every time i click on the signal bars on the bottom right hand corner, it says no connection, but after about 2 seconds of clicking on it, it connects again. So in order for me to get my connection back, i have to click on my signal bar to get it back, which is ridiculous. I have other computers in my home, all of which do not have this problem, so its definitely something in my desktop, i also have about 3 wireless adapters i've tested it on, all of which do the exact same thing on my desktop only. I've also went to power management under configuration for my USB adapter and turned off the ''Allow the computer to turn off this device to save power'', it still drops my connection every 3-5 minutes.
View 1 Replies
View Related
Mar 28, 2012
1)For 3650X I found some contradiction in the Q&A about feature set LAN Base vs IP Base:
LAN Base: Can I do static IP routing ?
LAN Base: SVI => is this for intervlan routing ?
2)For 2960, there are 2 flavors (LAN lite and LAN BASE) Q: Can I do static routing on one of these flavors ?
View 2 Replies
View Related
May 6, 2012
I have a WS-C3750X-12S-S (IP Services) that I THINK I'd like to downgrade to LAN Base so I can stack it with a WS-C3750X-48T-L that is already LAN Base..
View 4 Replies
View Related
Nov 14, 2011
can we upgrade 2960 switch from Lanbase IOS to IPbase
View 4 Replies
View Related
Dec 21, 2011
i have a problem with my network adapter. i have successfully reformatted our desktop computer. I was able to connect to the internet for a week but after that, when i tried to connect again, it says that i do not have any network adapter and that i should install one. i tried to look at my device manager, there was no network adapter in my devices. i tried to install a realtek adapter but still nothing happened. i even tried reinstalling my os but it wont read by dvd. also, i have a laptop, but the internet connection is working properly there.
View 3 Replies
View Related
Nov 5, 2011
I have a XPS 15 (502x). It has the above adapter installed but when I insert my sim card it says no network available.
I use the same sim card in a USB modem and it works fine.
View 3 Replies
View Related
Mar 10, 2011
My pc has a on board ethernet adaptor that stopped working all of sudden... I have no idea about what to do... I tried to check if there were any problem with a driver or something but the nic isn't even detected by the pc..
View 1 Replies
View Related
Mar 20, 2011
i reinstall my computer today, and i can't connected to the internet.also, i can't find newtork adapters in the device manager section.something must wrong, i just don't know what's wrong.
View 2 Replies
View Related
Mar 1, 2011
Ethernet stop working, but the wireless is fine, check in the device manger for any conflics none. open the network sharing centre and ran the truoble shooting utiiity and message came up with ethernet cable not plug in or brocken, which i have change it for a new one so its not the cable and its not the routor because B.T just gave me the new B.T Hub3, this network adaptor is on board and i have a wireless card in the PCI slot and the is a new main board which i built, everything was fine afew months ago til this started to acur
View 4 Replies
View Related
Aug 19, 2012
I'm using an HP Elitebook 6930p with Windows XP and an HP EN488UT docking station. When I use the computer by itself the Network Connections shows "Local Area Connection 3 Connected Intel 83567LM Gigabit Network Connection" and I can connect to the internet. When I am in the docking station, I can also see this connection, as long as my notebok is open when I start up. However, if i start the computer with the lid closed (I just want to use the external monitor, not the notebook monitor) that network connection does not appear and I cannot connect to the intenet.
[code]....
View 5 Replies
View Related
Mar 10, 2011
what is a diskless station in networking
View 1 Replies
View Related
Oct 16, 2012
if the network i'm planning on will even work so i drew a picture on my project (attached). All cables will be gigabit compatible as will be the switches. The reason i will have 2 switches is because they won't be in the same building. The uppermost switch will be physically next to the router to enable me to have gigabit connection between the DiskStation and the PCs/HTPC without having to change my router (in fact can't change it due to special firmware for my internet TV).
View 4 Replies
View Related
May 1, 2012
We would like to install a wireless network throughout the station. Currently we have a wired network with 15 PC's and are looking at obtaining tablets for our squads and apparatus. The station is quite large and is divided by the vehicle bays.I'm thinking that we will need multiple access points throughout the station. I am familiar with setting up one wireless router but not with multiple access points.
View 2 Replies
View Related
Feb 28, 2012
I have the Air Station WHR-G300N. I just moved here from CA, I was on Verizon and now trying to use it on my girlfriend Cox system I can't get it to operate correctly.
Her PC system stopped having internet connection after about 2 weeks(running on the router) and going with Cox's reboot procedure of eliminating the router it can back up and seems to work fine as soon as I hook it back to the modem it stops.
I have unplugged all cables waited 30 seconds on both systems a couple of times. The lights are on the modem and the router.
View 1 Replies
View Related
May 18, 2012
I am trying to install ACS 5.0 on workstation, however once the install finsihes it reboots and I enter the Linux bash command line rather than the Cisco CLI.
Note - this is now fixed. I followed the steps here to install ACS 5.0 on VMware Workstation 7: url...
View 2 Replies
View Related
Mar 28, 2013
I am blocked with the below doubt for my issue resolution. When a ethernet frame for eg:ARP Packet of minimum length (64 bytes) is received at the end station, will the L2 layer remove both FCS and extra padding bytes(18 padding bytes for ARP)? Or removal of the padding bytes is dependent on the implementation?
View 2 Replies
View Related
