basically i have a desktop computer which i hook up directly to the router , anyway its coming up as an un identified network on network and sharing area , and when i select "connect to a network it only shows a PPoE Connection . I tried replugging the ethernet cable and it comes up an error message "windows has detected an IP address conflct"
View 14 RepliesI have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.
View 14 Replies View RelatedI have been having router/wireless internet issues since my internet provider had to come out and fix the outside lines. Ever since then I get the Network Error: "Windows has detected and IP address conflict" whenever my laptop and my wife's try to use the wireless at the same time. I have tried release/renew of my IP address and also reseting my router to factory settings to no avail.
Computer info and ipconfig/all:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
[Code].....
There are about 3 laptops, one desktop, and 2 gaming consoles that are using the router. Everything connects fine expect the one laptop. It is an ASUS laptop running Windows 7. Whenever the laptop is going to connect to the internet every other device using the internet is stalled for a few moments, then reconnects. The computers then give the IP Address Conflict message. This is extremely frustrating. Sometimes it happens when people are accessing the Web for college assignments, and sometimes gaming, which is annoying to get disconnected from. I have tried to release / renew the IP, but it tells me it can't complete the process.
View 1 Replies View RelatedI am getting a window message which is saying ''Window has detected an IP address conflict. there is another pc on this network that is using the same Ip address.
View 1 Replies View Relatedrecently I have been getting slow internet and download speeds at a later time in the day, when there is 3 or 2 internet connections that show up in my connections. one being mine virgin broadband, another sky and Bthomehub, whenever these connections are up my download speed on steam goes from 1.1mb/s to 250kb/s and i get the message from windows saying' 'windows has detected ip conflict'' I can still access the internet play games online fine, but my download speed is really slow and sometimes internet is slow aswell
View 7 Replies View RelatedI've got a wireless network, consisting of two Windows 7 PCs, a wireless printer, an Android tablet and an iPhone. The PCs are always on the network; the other devices only connect occasionally. The router is a Dynamode R-ADSL-C4-W-G1. IP addresses are assigned by DHCP, and both PCs are set up to get an IP address automatically.Now and again, I get an error message on my PC, saying Windows has detected an IP address conflict on the network. I looked in the System Event Log, and found the following message: Quote:The system detected an address conflict for IP address 10.0.0.3 with the system having network hardware address [hex number here]. Network operations on this system may be disrupted as a result.
When I checked in the router settings, I found 10.0.0.3 had been assigned to the other PC, which also has the hardware address given in the error message - I'm not sure how that constitutes a conflict!When I get this error message, I never encounter any connectivity problems - i.e. both machines can still access the internet.
I have recently started getting random 'Windows System Error- There is an IP conflict' blah blah blah messages on my PC, this only seems to happen when I also have the wireless switched on on my HTC Desire phone.I have done the usual checks and everything in the house, that is connecting to the wireless (2 phones and a laptop) is on a different IP address so as far as I can see there is no actual conflict.I have a Netgear WPN824v2 Router with the main PC connected to it. Sometimes it goes for ages without doing it or I can get one after the other, sometimes the PC drops it's internet connection altogether.
View 14 Replies View RelatedI've been getting a popup error message for about a week:"There is an ip address conflict with aother system on the network". This is only for 2 desktop PCs with wired ethernet connections. Wireless devices are fine with no error message. The wired LAN PCs basically lose all network capability. Reboot fixed it, but it returned every time it was rebooted.I have a Virgin Media Superhub with another router configured as an access point. To cut a long story short, after trying to reset everything, re-installing network adapters & swapping ports, I decided to set the Superhub to Modem Mode, and re-configure the access point router to act as a standard wireless router. In other words renewing the whole network's LAN IP addresses.I now don't lose network capability, but the error message is still appearing on both wired LAN PCs. I use the Fing app on my android phone which lists IP addresses for all devices on the network, wired and wifi, and no 2 addresses are the same, which suggests that DNS is doing its job.
View 3 Replies View Relatedwindows seven changes my ip address after sitting idol for awhile. I have to reboot and reset my modum the computer is brand new
View 1 Replies View RelatedNothing seems to be able to connect to my wireless network. It seems to have occurred after I installed a new copy of windows 7 onto my sister's desktop. A message appeared saying we have the same ip address. I've tried renewing our ip address on both desktop but it won't give us new ip address for some reason.
View 14 Replies View RelatedRecently I dual-booted my PC from Windows XP(On which the LAN card was working and i was able to access the internet) to Windows 7.Then i formated the drive on which WinXP was installed. Sometime later i noticed that the LAN card (Atheros A8151 PCI-E Ethernet Controller) was not working i went into the adapter settings in network control in the control panel and there was no adapter. i checked the device manager and there was no option called NETWORK ADAPTERS.
View 14 Replies View RelatedI've got a small wireless home network that currently has 2 computers - my desktop is running XP Pro, and a laptop that my wife uses running XP Home. I've recently bought a new laptop that is running Windows 7, and although it picks up the wireless feature of the network (it has wireless internet access), I can't seem to figure out how to get this new Windows 7 laptop to see the other PCs or the printer connected to my desktop. I've tried a couple of the "how-tos" online, but I must be doing something wrong. getting my Windows 7 box to see the other PCs and printer on my network
View 3 Replies View RelatedWhen I sign on the internet, I get a Windows System Error - "There is an IP address conflict with another system on the network." I went to command prompt and typed "ipconfig /renew" but the response was "No operation can be performed on Local Area Connection while it has media disconnected".
View 1 Replies View RelatedI'm trying to perform ping to another network segment using nat to those devices but the ipaddress i assigned are the same as the segment i am trying to monitor is there anyway to overcome this?
View 4 Replies View RelatedI have a laptop running xp on a home network using cisco-linksys wrt310n router. A couple months ago I added another laptop running win7 to the network, and since then I have been getting ip address conflict errors once or twice a day. Both machines are set to obtain ip address automatically
View 1 Replies View Relatedhere where I work we are having an issue with IP Address conflicts. We are not sure exactly why, though. We have only had it happen 2-3 times so far, but this has been over the past week or so, and we would like to get it resolved. Here is what is happening: Last week we were getting an "IP Address conflict" message on one of our computers. It had received 192.168.3.112 from our DCHP server, so we switched it to a static IP address up beyond our DHCP range. We then tried pinging the address with the conflict, but got nothing. We figured it was some device that had a static address, so on the DHCP server we reserved it to a non-existent mac address so it wouldn't hand that one out again. This wasn't a problem, since it was an isolated incident.
Since then we have tried periodically pinging 192.168.3.112 to see if there is actually a device using that address, but have gotten no replies. Since then we have had another one or two times where this has happened, but with different IP addresses. We went around and checked a couple of different wireless routers that we had deployed, but the DHCP had been disabled on all of them (but then again, the issue came up just recently, while the routers have been out there for months).
This has been happening for a few months and I have had to reset the router every time and it usually works. I have 3 laptops, normally 2 are used and a roku streaming player connected to the tv. Both laptops are on windows 7 and sometimes the wifi suddenly stops working [sometimes only stops for some devices] even though i am still connected to the my router. Some times, a popup comes up that says that windows has detected an ip address conflict, so I think that that is the problem, but when I try to do ip/release, renew, it says that the media is disconnected to wireless network connection 2 even while i can access the internet.
View 14 Replies View RelatedMy neighbour n myself are using a shared internet connection. The modem is situated in his house and I have connected to that modem using a LAN cable, which comes to my house. That LAN cable goes into my WiFi router (through which I use the internet connection). I use a Lap and my neighbour a Desktop, he's receiving a "IP address conflict error" in his system, due to which his internet connection is getting disrupted. If I don't use my Wifi router and connect directly through the LAN cable he does not face any problem. But I need my router back?
View 2 Replies View RelatedMy Asus X53E laptop says I have a conflicting IP address. I should be the only computer on my network and able to access my internet. I have had my credit used up before but Telstra said this isn't possible. How can I stop any neighbour or anyone else accessing my laptop and internet
View 1 Replies View RelatedI have a Netgear DG834PN Router. Connected to it usually are 2-3 laptops (XP, Vista, 7) wirelessly, a Xbox 360 and Win 7 PC via cables, a wireless printer and often an iPod touch, however PS3s, mobile phones etc are connected occasionally.
It had been functionally normally.until we changed ISP after ours was taken over (we didn't change but the provider obviously now has). However, since then (1st Feb) we've been having connection issues, probably an IP address conflict where items can access the router but not the internet.
The iPod and Xbox sometimes don't connect, as do the laptops often after been powered up from a sleep. Yesterday, when powering up one of the laptops, I got an IP address conflict message. Restarting the router sometimes works, but mostly it allows one device on and not another.
The printer has a static IP address (192.168.0.4) that I had to set up to get it working, but this has been active for months now without issue. I've had a look in the router settings and it's set up for DHCP as default with IP addresses from 192.168.0.2 to 192.168.0.254 so I don't understand why it has this issue suddenly. I had a look at the connected devices list, and everything appeared to have its own IP address.
I am having issues with wireless connections with my laptop but I can connect with my phones and iPod, however wired connections work perfectly.
The moment I attempt a wireless connection I receive continuous error messages saying that there is an ip-address conflict with another system on the network and i lose all internet access.I have already tried adding a dhcp reservation?
im recieving ip conflict adress error i have an dsl modem and its my individual i ave not share a connection with anyone.and whenever i recieved this error my net works zero
View 1 Replies View RelatedI get a "IP address conflict" message on my wireless network. Using a WRVS4400n wireless router with the latest firmware that is set to PPoE. Motorola 336 dsl modem is set to bridge mode. My network has 2 computers attached: hardwire desktop and wireless connection to laptop. When I contacted ATT support, they said the problem is in the wireless modem. Are there some settings in the WRVS4400n that must be set to insure that each computer gets a different IP address?
View 2 Replies View RelatedI have switch 2960 and router that connect with one interface to that switch. the link is trunk and Router function is inter vlan routing between 4 vlan. This netwrok has only one ip address space that is 10.10.2.0/24 and work without problem. We connect cisco switch 2960 with optic link to another switch that in stack 3750 which configured as trunk link and allowed only 3 vlan between them. In the other side netwrok which consist the switch 3750 we have different subnet ip address that switch working in layer 3 too. the problem is that when I permit vlan 210 in the switch 2960 only layer 2 between this switch and the 3750 in network that consist th ip address 10.10.2.0/24 devices, if I disconnect and then connect pc to network he says that he has ip conflict and in the log he show mac address of router that has vlan 210 subinterface configured with 10.10.2./24 subnet. But how I gibe back vlan 210 from permited vlan in trunk devices start normaly working. If I again put vlan 210 to permit vlan in that trunk devices again said that there are conflict ip address and show mac address vlan 210 router subinterface.
View 10 Replies View RelatedI have an issue that started showing up since I bought a new computer. The old computer ran XP, the new one runs Windows 7. Almost every time I start the computer I get an error message telling me Windows has detected an IP conflict. Sometimes when I click okay I get the message a second timeAbout half the time, I have no internet connection when I start up and have to restart my router, which fixes the problem (after restarting the modem, I do not need to do anything like renew with ipconfig; it just starts working). I do this so often I attached it to a power switch to make it easier than unplugging.My setup is this. My PC is connected to a router connected to my cable modem. The router is also connected to a wireless hub. This hub is used by only one device, my Wii U. I can get the error message even if my Wii U is turned off.
View 3 Replies View RelatedMy wireless printer has a permanent IP address but since I have changed broadband providers I do not know how to change this to the new network. The printer cannot be detected on wireless.
View 3 Replies View RelatedI have multiple computers on my network as well as cell phones logging in as wifi. At least once a day I have trouble or another computer has trouble getting on line through my network. I have to unplug my router and replug. Its as if it doesn't recognize the ip address until reboot.
View 1 Replies View Relatedmy 5505 running on version 8.2.5 doesn't seem to recogize the simple command "ip address dhcp setroute......"
ciscoasa(config-if)# ip address dhcp
^
ERROR: % Invalid Hostname
ciscoasa(config-if)# ip address ?
configure mode commands/options: Hostname or A.B.C.D Firewall's network interface address
I have reloaded windows vista in my desktop. Every thing is working fine except that system is not detecting the lan cable. I have tried with a new cable but no luck.
View 1 Replies View Relatedi have a home computer. windows xp. i have a virgin mobile broadband chip that i have always been able to plug n to the usb slot on bck of computer and it pulls up the internet with no problems. i tried to get on the internet and it keeps telling me that the device isnt detected. i troubleshot,lol. and windows tells me to go to control panel, network connections, LAN or high-speed internet, the problem is i only see 3 g and local internet connection?
View 12 Replies View RelatedI reset my WAP54g v3.05 to factory default to allow an older computer access to my network.
Now I've reinstalled it for better security using my newer laptop: no SSID broadcast and encryption set for WPA2-personal. However, when I enable Mac filtering and permit my newer laptop, the WAP54g does not recognize it.
Disable Mac filtering and my laptop is back on the network.
My stereo bluetooth headset-Dell Byte Corseca stereo bluetooth headset is not getting detected in my Acer Laptop (Acer 4752z). The headset works fine with my mobile. My laptop too can detect other bluetooth devices like mobile phones, mono stereo headsets, bluetooth mouse without any problem. However the headset is not detected when i try "Add a Device".
View 7 Replies View Related