IP Address Conflict Message On One Of Our Computers
Jun 1, 2011
here where I work we are having an issue with IP Address conflicts. We are not sure exactly why, though. We have only had it happen 2-3 times so far, but this has been over the past week or so, and we would like to get it resolved. Here is what is happening: Last week we were getting an "IP Address conflict" message on one of our computers. It had received 192.168.3.112 from our DCHP server, so we switched it to a static IP address up beyond our DHCP range. We then tried pinging the address with the conflict, but got nothing. We figured it was some device that had a static address, so on the DHCP server we reserved it to a non-existent mac address so it wouldn't hand that one out again. This wasn't a problem, since it was an isolated incident.
Since then we have tried periodically pinging 192.168.3.112 to see if there is actually a device using that address, but have gotten no replies. Since then we have had another one or two times where this has happened, but with different IP addresses. We went around and checked a couple of different wireless routers that we had deployed, but the DHCP had been disabled on all of them (but then again, the issue came up just recently, while the routers have been out there for months).
View 3 Replies
ADVERTISEMENT
Jan 5, 2013
I have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.
View 14 Replies
View Related
Jul 25, 2012
Can an IP conflict cause network issues for computers other than the devices that have the same IP? I have resolved an issue where someone was testing a device on our network and assigned a static IP that was already in use by one of our printers. Specifically, I am curious if the IP conflict could have caused issues with mapped network drives for other computers. I just seemed to have network gremlins for the 2 days of the IP conflict.
View 2 Replies
View Related
Apr 22, 2011
When I sign on the internet, I get a Windows System Error - "There is an IP address conflict with another system on the network." I went to command prompt and typed "ipconfig /renew" but the response was "No operation can be performed on Local Area Connection while it has media disconnected".
View 1 Replies
View Related
Jan 29, 2013
I've got a wireless network, consisting of two Windows 7 PCs, a wireless printer, an Android tablet and an iPhone. The PCs are always on the network; the other devices only connect occasionally. The router is a Dynamode R-ADSL-C4-W-G1. IP addresses are assigned by DHCP, and both PCs are set up to get an IP address automatically.Now and again, I get an error message on my PC, saying Windows has detected an IP address conflict on the network. I looked in the System Event Log, and found the following message: Quote:The system detected an address conflict for IP address 10.0.0.3 with the system having network hardware address [hex number here]. Network operations on this system may be disrupted as a result.
When I checked in the router settings, I found 10.0.0.3 had been assigned to the other PC, which also has the hardware address given in the error message - I'm not sure how that constitutes a conflict!When I get this error message, I never encounter any connectivity problems - i.e. both machines can still access the internet.
View 5 Replies
View Related
Aug 5, 2011
I'm trying to perform ping to another network segment using nat to those devices but the ipaddress i assigned are the same as the segment i am trying to monitor is there anyway to overcome this?
View 4 Replies
View Related
Oct 26, 2012
I've been getting a popup error message for about a week:"There is an ip address conflict with aother system on the network". This is only for 2 desktop PCs with wired ethernet connections. Wireless devices are fine with no error message. The wired LAN PCs basically lose all network capability. Reboot fixed it, but it returned every time it was rebooted.I have a Virgin Media Superhub with another router configured as an access point. To cut a long story short, after trying to reset everything, re-installing network adapters & swapping ports, I decided to set the Superhub to Modem Mode, and re-configure the access point router to act as a standard wireless router. In other words renewing the whole network's LAN IP addresses.I now don't lose network capability, but the error message is still appearing on both wired LAN PCs. I use the Fing app on my android phone which lists IP addresses for all devices on the network, wired and wifi, and no 2 addresses are the same, which suggests that DNS is doing its job.
View 3 Replies
View Related
Mar 20, 2011
I have been having router/wireless internet issues since my internet provider had to come out and fix the outside lines. Ever since then I get the Network Error: "Windows has detected and IP address conflict" whenever my laptop and my wife's try to use the wireless at the same time. I have tried release/renew of my IP address and also reseting my router to factory settings to no avail.
Computer info and ipconfig/all:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
[Code].....
View 14 Replies
View Related
Oct 19, 2012
There are about 3 laptops, one desktop, and 2 gaming consoles that are using the router. Everything connects fine expect the one laptop. It is an ASUS laptop running Windows 7. Whenever the laptop is going to connect to the internet every other device using the internet is stalled for a few moments, then reconnects. The computers then give the IP Address Conflict message. This is extremely frustrating. Sometimes it happens when people are accessing the Web for college assignments, and sometimes gaming, which is annoying to get disconnected from. I have tried to release / renew the IP, but it tells me it can't complete the process.
View 1 Replies
View Related
Mar 17, 2013
I have a laptop running xp on a home network using cisco-linksys wrt310n router. A couple months ago I added another laptop running win7 to the network, and since then I have been getting ip address conflict errors once or twice a day. Both machines are set to obtain ip address automatically
View 1 Replies
View Related
May 18, 2011
I have recently started getting random 'Windows System Error- There is an IP conflict' blah blah blah messages on my PC, this only seems to happen when I also have the wireless switched on on my HTC Desire phone.I have done the usual checks and everything in the house, that is connecting to the wireless (2 phones and a laptop) is on a different IP address so as far as I can see there is no actual conflict.I have a Netgear WPN824v2 Router with the main PC connected to it. Sometimes it goes for ages without doing it or I can get one after the other, sometimes the PC drops it's internet connection altogether.
View 14 Replies
View Related
Jun 17, 2012
This has been happening for a few months and I have had to reset the router every time and it usually works. I have 3 laptops, normally 2 are used and a roku streaming player connected to the tv. Both laptops are on windows 7 and sometimes the wifi suddenly stops working [sometimes only stops for some devices] even though i am still connected to the my router. Some times, a popup comes up that says that windows has detected an ip address conflict, so I think that that is the problem, but when I try to do ip/release, renew, it says that the media is disconnected to wireless network connection 2 even while i can access the internet.
View 14 Replies
View Related
Aug 1, 2012
My neighbour n myself are using a shared internet connection. The modem is situated in his house and I have connected to that modem using a LAN cable, which comes to my house. That LAN cable goes into my WiFi router (through which I use the internet connection). I use a Lap and my neighbour a Desktop, he's receiving a "IP address conflict error" in his system, due to which his internet connection is getting disrupted. If I don't use my Wifi router and connect directly through the LAN cable he does not face any problem. But I need my router back?
View 2 Replies
View Related
May 26, 2012
My Asus X53E laptop says I have a conflicting IP address. I should be the only computer on my network and able to access my internet. I have had my credit used up before but Telstra said this isn't possible. How can I stop any neighbour or anyone else accessing my laptop and internet
View 1 Replies
View Related
Feb 4, 2011
I have a Netgear DG834PN Router. Connected to it usually are 2-3 laptops (XP, Vista, 7) wirelessly, a Xbox 360 and Win 7 PC via cables, a wireless printer and often an iPod touch, however PS3s, mobile phones etc are connected occasionally.
It had been functionally normally.until we changed ISP after ours was taken over (we didn't change but the provider obviously now has). However, since then (1st Feb) we've been having connection issues, probably an IP address conflict where items can access the router but not the internet.
The iPod and Xbox sometimes don't connect, as do the laptops often after been powered up from a sleep. Yesterday, when powering up one of the laptops, I got an IP address conflict message. Restarting the router sometimes works, but mostly it allows one device on and not another.
The printer has a static IP address (192.168.0.4) that I had to set up to get it working, but this has been active for months now without issue. I've had a look in the router settings and it's set up for DHCP as default with IP addresses from 192.168.0.2 to 192.168.0.254 so I don't understand why it has this issue suddenly. I had a look at the connected devices list, and everything appeared to have its own IP address.
View 13 Replies
View Related
Jan 6, 2012
I am having issues with wireless connections with my laptop but I can connect with my phones and iPod, however wired connections work perfectly.
The moment I attempt a wireless connection I receive continuous error messages saying that there is an ip-address conflict with another system on the network and i lose all internet access.I have already tried adding a dhcp reservation?
View 1 Replies
View Related
Aug 22, 2012
I am trying to find a way of sending a notification message to computers that have been "woken up" by Wake On LAN, so that the user knows there computer is now up.
View 1 Replies
View Related
Jan 19, 2011
I have two desktops connected to the internet through wired connections to a router. I also have one laptop that is wireless connected to the internet via the same router. (Also have another laptop running Vista, but not using it right now.) and all are part of the same work group with unique computer names.Desktop 1 can see that there is a work group, but cannot see the computers in the work group. Error message about permissions.
View 1 Replies
View Related
Feb 5, 2012
im recieving ip conflict adress error i have an dsl modem and its my individual i ave not share a connection with anyone.and whenever i recieved this error my net works zero
View 1 Replies
View Related
Jan 17, 2011
basically i have a desktop computer which i hook up directly to the router , anyway its coming up as an un identified network on network and sharing area , and when i select "connect to a network it only shows a PPoE Connection . I tried replugging the ethernet cable and it comes up an error message "windows has detected an IP address conflct"
View 14 Replies
View Related
Apr 30, 2011
I am getting a window message which is saying ''Window has detected an IP address conflict. there is another pc on this network that is using the same Ip address.
View 1 Replies
View Related
Jan 24, 2013
I get a "IP address conflict" message on my wireless network. Using a WRVS4400n wireless router with the latest firmware that is set to PPoE. Motorola 336 dsl modem is set to bridge mode. My network has 2 computers attached: hardwire desktop and wireless connection to laptop. When I contacted ATT support, they said the problem is in the wireless modem. Are there some settings in the WRVS4400n that must be set to insure that each computer gets a different IP address?
View 2 Replies
View Related
Feb 19, 2013
Nothing seems to be able to connect to my wireless network. It seems to have occurred after I installed a new copy of windows 7 onto my sister's desktop. A message appeared saying we have the same ip address. I've tried renewing our ip address on both desktop but it won't give us new ip address for some reason.
View 14 Replies
View Related
Feb 7, 2012
I have switch 2960 and router that connect with one interface to that switch. the link is trunk and Router function is inter vlan routing between 4 vlan. This netwrok has only one ip address space that is 10.10.2.0/24 and work without problem. We connect cisco switch 2960 with optic link to another switch that in stack 3750 which configured as trunk link and allowed only 3 vlan between them. In the other side netwrok which consist the switch 3750 we have different subnet ip address that switch working in layer 3 too. the problem is that when I permit vlan 210 in the switch 2960 only layer 2 between this switch and the 3750 in network that consist th ip address 10.10.2.0/24 devices, if I disconnect and then connect pc to network he says that he has ip conflict and in the log he show mac address of router that has vlan 210 subinterface configured with 10.10.2./24 subnet. But how I gibe back vlan 210 from permited vlan in trunk devices start normaly working. If I again put vlan 210 to permit vlan in that trunk devices again said that there are conflict ip address and show mac address vlan 210 router subinterface.
View 10 Replies
View Related
Jan 23, 2012
I have a Asus EeePC SeaShell 1005HA-H and i have a LINKSY ROUTER in my home. I recently been having problems with my wireless internet. I know it isnt the router because i have went to my boyfriends house and my laptop usually automatically connects to his internet and the same message continues to show up "Acquiring Network Address message". I try to repair the network and a error comes up. Then i went to check the firewall settings and the firewall is tured off.
View 1 Replies
View Related
Aug 22, 2011
we manufacture an industrial device that runs embedded linux, and we are throwing ideas around on how we can find devices that are connected to our network, without knowing their ipAddress. I know this is possible, because Advantech do it with their ADAM utility to find units. I put a WireShark sniff on my LAN as the ADAM Utility found a unit, and saw the following[CODE]
View 2 Replies
View Related
Dec 6, 2012
I am receiving this error after connecting a copper adapter on a GBIC blade in a 6509. Here are the results from the show Interface. I am waiting to confirm the device on the other side settings but as far as I see I get UP and Up for protocol and line respectively.
GigabitEthernet2/11 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is 0009.11e4.f3ce (bia 0009.11e4.f3ce)
Description: RCPBSDEV
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
[code]....
View 3 Replies
View Related
Mar 21, 2011
I want to set up a Home network between a Win XP PRO/LINUX UBUNTU 10.10(Dual boot) and a Win XP PRO.I need to find out:
A) The IP address of:
1) Each machine on the router
2) The router's IP address
B) How to configure the router using this information Several years ago I saw a tech set up a network using this information but I don't remember how to do it
C) What software I can use on Ubuntu to set up the network
View 3 Replies
View Related
May 15, 2011
How is a computers hostname translated into an IP-address?Eg. when i enter "\server1" into the "run"-menu i get access to my server at IP-adress 192.168.1.2, but how does my computer know what IP-address is it?
View 5 Replies
View Related
Oct 4, 2012
I have a Windows 7 computer. My boss changed the IPv4 address of this computer. Nowalthough all computers can connect to the network, they can no longer see this computer. And this computer cannot connect to the other computers.
View 1 Replies
View Related
Dec 3, 2011
Bought DIR-655 from Amazon. Rev. B. Come with 2.00NA firmware. Updated to latest one, and there are a lot of problems, to most of them, I was not able find any solution. Here they start:
1. WIFI SPEED PROBLEMS.No matter what speed, parameters, channel, mode, etc I select, router keeps working on 20mhz channel width. So I never get speeds above 65 mbit. In absolutely same conditions, my DIR-300 B1 (with DD-WRT firmware) gives me stable 150mbit. SO I KINDLY ASK, MAYBE THERE IS A WAY TO FORCE "40 MHZ ONLY" OPTION?
2. PASSWORD PROBLEMS.Router came with no admin password, I enter new password, hit "update" it says - wait 20 sec, after that, login page is displayed, but, new pasword does not works! since it asks again for empty password!
3. FILTERING PROBLEMS.I need to block certain IP address to be accesed by all my computers. Say this is 111.111.111.111 . So I added inbound filter rule, to block access to that IP. It does not works - IP is still accesible.
4. MORE FILTERING PROBLEMS.Since above mentioned method does not works, I have to use "ACCESS CONTROL" feature. It does works, but it causes another problem, with access control enabled, all webpages with form submit stop to work. For example, if I'll have that feature enabled, when I press "post" on this webpage, it instantly will go to "this page cannot be displayed".
I bought this router solely for one purpose - I was happy with speed of my DIR-300, but I needed gigabit for my computers. So I thought, instead of buying separate switch, I'd better buy a router with gigabit. I was suggested to get TP-LINK 1043, since it's quite popular, alternate firmwares available and so on, but I refused to buy it, since I thought that some chinese company does not worth my attention. So I bought this D-Link (for almost 2x price of TP-Link) and having huge problems as you can see.
View 9 Replies
View Related
Aug 8, 2012
I want to do what I thought would have been a simple enough task - block my kids phone/computer after certain hours. Instead of blocking the specified MAC address(es), all my computers does not have internet access. As soon as I disable the policy, internet access is on again. Here's what I did:
[code]...
View 4 Replies
View Related
May 23, 2012
when I ping another workstation on my local network I should get back it's local IP but instead I am getting an ip address that resolves to somewhere in Germany! In fact if I ping any bogus name, I mean anything, it returns this same address 62.116.181.25. If I shut down my cable modem then everything resolves correctly. And yes I have DNS relay enabled because it seems to be the only way to get the workstations to resolve external sites correctly.
View 2 Replies
View Related
