Wireless :: Wifi Not Detected In Some Machines?
Apr 29, 2012
I am using Nokia Siemens router. Recently there is an hack on the network. So I changed the security by enabling WPA2-PSK and AES and mac filter enabled. After that two of my roommate machines are not getting connected to WiFi. Even I cant see ssid being detected in thier machines. How to connect to the machines. I have tried by removing security also but those two machines cant even detect the network being broadcasted by us. But it is detecting other networks (neighbors wifi).
View 1 Replies
ADVERTISEMENT
Apr 29, 2012
I am using Nokia Siemens router. Recently there is an hack on the network. So I changed the security by enabling WPA2-PSK and AES and mac filter enabled. After that two of my roommate machines are not getting connected to WiFi. Even I cant see ssid being detected in thier machines.
how to connect to the machines. I have tried by removing security also but those two machines cant even detect the network being broadcasted by us. But it is detecting other networks(neighbors wifi).
View 1 Replies
View Related
Apr 29, 2012
I am using Nokia Siemens router. Recently there is an hack on the network. So I changed the security by enabling WPA2-PSK and AES and mac filter enabled. After that two of my roommate machines are not getting connected to WiFi. Even I cant see ssid being detected in thier machines. how to connect to the machines. I have tried by removing security also but those two machines cant even detect the network being broadcasted by us. But it is detecting other networks(neighbors wifi).
View 1 Replies
View Related
Sep 29, 2012
I've just set up DHCP Snooping and IP Source Guard on our SG500 series switches. It seems to work quite well, except when a wireless host roams from one AP to another (on a different switch port), all traffic from that host gets blocked.
I can understand why this is occuring, but I don't know what I can do to work around this problem.had success with roaming WiFi machines in conjunction with IP Source Guard?
View 6 Replies
View Related
Mar 19, 2013
HP G62-b12SA Notebook PC, WINDOWS 7 (64 BIT). wifi card realtek 8191se.The wired LAN is working fine. but the wi fi is not detecting any wifi network leave alone joining.the laptop was bought in UK being used in India. The wi if was working fine till about one month back.Windows couldn't automatically bind the IP protocol stack to the network adapter.
View 13 Replies
View Related
Dec 31, 2012
While there I had internet which was set up by a technician. However, now that I'm back, my computer shows that it's conected to the wifi here, but I am unable to get internet access. Is there perhaps a setting that could have been changed while I was in Peru that is preventing me from getting internet access in the U.S.?
View 5 Replies
View Related
Mar 4, 2011
I have a problem on my DIR-652.My wifi signal is not detected over the past few days. I went through the settings, everything is good. Outside, in the page information device, wireless radio is off. How to put it ON?I am attaching the screen print.
View 2 Replies
View Related
Apr 1, 2013
I have D-link 524 router, my problem is that its signals are not being detected ( the devices we connect are ipad 4, htc wildfire S, nokia e-5 . these devices detect other wifi and connect to them.
View 14 Replies
View Related
Apr 1, 2013
I have D-link 524 router, my problem is that its signals are not being detected previously it was working fine( the devices we connect are ipad 4, htc wildfire S, nokia e-5 . these devices detect other wifi and connect to them.
View 2 Replies
View Related
May 7, 2011
Once again the sun sinks into its nightly reprieve; for the third time since I first set out on this mission. Before me, only the piercing glows of monitors that sting my eyes. Yet, I cannot look away. The clacking of keys, once triumphant battle drums of purpose, has grown sharp. They pierce my ears and my mind. It would be madness to continue. My body is weak. My resolve is waning. My sanity ...... tenuous. But if seeing this through means madness.....bring on the madness.
I'm trying to find a way to network my desktop (wired) and my laptop (wifi) so that I can swap files between the two easily. I've mostly been attempting this through Windows Homegroup, although I've also downloaded and installed TeamViewer. The thing is, the two just will not connect. After much poking around I found the specific symptom to be that wired connections and wireless connections refuse to speak. My laptop sees my roomie's laptop easily enough, though. And if I hardline my laptop to the router suddenly their best friends! - joining each others' Homegroup, swapping files, trading recipes!
Points of interest: I've noticed that, while both are enabled, only IPv4 connectivity indicates internet access; IPv6 says No Internet Access. Pings from one machine to the other result in "Request timed out" or "Destination Host Unreachable." I've disabled firewalls - Windows and the one on the router. Disabled and then uninstalled anti-virus. I've updated the router firmware and net adapter drivers I tried restoring router to factory settings, in case I changed something I shouldn't have along the way. I've alternated static and dynamic ip addresses - no difference there. I've just spotted a couple of errors in the Event Viewer that look like they could be leads;(!)ErrorDhcp-Client The IP address lease 192.168.2.2 for the Network Card with network address 0x6CF049E337F0 has been denied by the DHCP server 192.168.2.1 (The DHCP Server sent a DHCPNACK message).
[code]...
View 8 Replies
View Related
Jan 21, 2012
Have been experiencing speeds of max 2.5 Mbps for transferring files between Windows 7 machines connected wirelessly to a Billion 800VGT router. A speed of maximum 18 Mbps was achieved. No matter what I did to adaptor settings it was the best possible. Have 6 wireless machines which I cross checked multiple times using Lan Speed Test by Totusoft.I then disabled the wireless security (WPA-PSK) on my Billion 800VGT router and secured the network by using the Wireless MAC address filter. My speed immediately increased to 11Mbps between wireless machines. Speeds to machines on fixed lan increased to 26 Mbps.
View 1 Replies
View Related
Apr 5, 2013
I'm pretty sure there is a very simple fix. When I am connected to my wireless network, I cannot see SOME connected machines. I feel like I have a domain named incorrectly. All of the items on my network are new...
Router - Cisco RV180
WLC - Cisco AIR-CT2504-K9
AP - Cisco AIR-LAP1041N-A-K9 <- 2 of these
The AP's are connected to Cisco SG200-8P, as is the 2504.The SG200-8P is connected to a Cisco SF302-8P, which is connected to the RV180 router.i don't have any separate VLANs setup (at least not on purpose)
View 1 Replies
View Related
Sep 7, 2011
I have a Linksys WRT120N that I use at home for wireless connectivity, with a total of three laptops that connect wirelessly, plus my Samsung Intercept phone. It's a mixed Wireless G and N network; the laptops run Windows XP, Windows Vista and Windows 7.The issue I'm having is this: the computers and phone do not stay connected on this network. Here's a for instance:Monday: I am able to connect wirelessly to my network with my laptop.Tuesday: I cannot connect to the same network; repairing the connection does nothing.Now substitute my laptop for the one running Windows 7, or Vista, or my phone.At that point, I have to power the router down and power it back on, and then we're back in business. The router currently is running version 1.0.05 of the firmware.
View 3 Replies
View Related
Aug 5, 2011
I recently purchased the E2500 cisco router. How does the MAC computer be able to log in as Guest user to access internet?
View 2 Replies
View Related
Aug 17, 2011
I own an E4200 and my wife and I use Goodreader on our ipads at home. To add docs to goodreader we need to connect to the ipads ip on port 8080 but the E4200 is blocking all traffic for it. How can I open port 8080 for our 2 ipads?
View 1 Replies
View Related
Mar 3, 2012
I have a laptop (let me call it A) with Intel Centrino 1030-N wireless (iwlwifi module), running Arch Linux, and another laptop (I will call it B) with Atheros AR928X wireless (ath9k module), running Ubuntu 11.10. They connect to a wireless network provided by a D-Link DI-524 router (802.11g), which in turn connects to a DSL modem (10Mbps/1Mbps link)
Copying files between those machines, either through scp or mounting a share via NFS or Samba, is very slow (at most 200 KB/s) and sometimes fails (times out), even when both machines are inches away from the router. However, downloading files on either machine works correctly at the expected speeds (~1.2 MB/s).
I ran iperf, as recommended in a comment, and it gave me this: [code] The bandwidth is very low, as can be seen from those results.
View 1 Replies
View Related
Jul 31, 2012
My friend uninstalled some programmes on his Toshiba laptop and now he can only connect to the router via an ethernet cable. When trying to find wireless networks the message "No wireless networks detected" appears. Other laptops and devices have no problems connecting throughout the house. I've uninstalled and reinstalled the right drivers for the wireless adapter, checked that the TCP/IP settings are on obtain ip address automatically, checked that the NIC is enabled in the BIOS and checked that the WLAN is on automatic in the services utilty and there is no other WZC running.
View 3 Replies
View Related
Jan 23, 2011
my network connection has not been detected suddenly....[URL]
Windows IP Configuration
Host Name................................:user
Primary Dns Suffix.......................:
Node Type..................................:Mixed
IP Routing Ensbled......................:No
WINS Proxy Enabled.....................:No
[code]....
View 1 Replies
View Related
Jun 30, 2012
I recently did a recovery on my laptop and had to put everything back to factory settings (losing all my music, programs, etc) due to a hard disk issue that I couldn't fix otherwise. After several hours waiting for the process to finish I logged onto my laptop - a toshiba, and realized that my wifi isn't working. The computer says there is an issue with the LAN being disconnected, but my router is communicating fine with other devices. Also, the side switch that turns wifi on and off is lit up (indicating that it is on) despite the fact that Fn + F8 are not responding on my computer. Generally, the laptop cannot detect any wireless devices or routers.I did another system recovery after reading about the issue, and tried turning it on and off, etc, but with no success.
View 1 Replies
View Related
Nov 12, 2011
a spare PC I have will not connect to the network via wireless, it is running XP Pro SP3, and is using a Xycel G-202 wireless adapter. It is seeing my Sky router, and trying to obtain an IP address, but failing every time.
I am using WPA-PSK and the key I am inputting is correct, my phone connects to the network with no problems.
View 4 Replies
View Related
Jan 5, 2012
I got a WVC80N Cisco wireless,Tried to set it up the camera there, no luck. The installation seems to go fine right up to the point where you disconnect the camera and it searches for it on the network, then I get the error message - camera not detected (even though when cabled to to router it is recognized). Tried it over and over, shut down rebooted and eventually forced the camera to reboot and erase all the settings and start over. No luck.Could it be my router is too old ? I thought it might be so I brought a second one in - a Linksys, pretty sure it was type N.
View 4 Replies
View Related
Feb 20, 2012
I have win7 on an HP Pavilion dv7. I came to my friend's house before, and his WiFi didn't come up as an option to connect to. I unplugged and plugged back in the router, and that worked and I was able to connect with no problem. But today, that didn't fix the problem. I have restarted my computer and the router several times, I have deleted the corresponding wireless profile under "manage wireless networks" list, I have turned off my McAfee firewall to see if that was blocking the connection, I have tried connecting manually through the network and sharing center, I have troubleshooted my wireless adapters (Atheros AR5009 802.11 a/g/n and Microsoft Virtual WiFi Miniport Adapter), I have turned off and turned back on my HP wireless assistant, I have updated the dirvers for the two adapters, I have installed the latest windows updates, I have done all I can think of. And it's not the router, because my cell phone can connect, as well as the other computers in the house, without any problems.
View 8 Replies
View Related
Apr 28, 2011
I have had this problem now for a couple of weeks, can't seem to find a solution, even after trying all sorts of things I have seen on the web. I can not seem to get the wireless internet to work on my computer. The problem started a while ago and since then I've actually formatted my hard drive and reloaded Windows XP and everything else back onto my computer. I ahve tried connecting to the wireless at home and at work and neither is working. My computer can see the networks when but can not connect to them. I used to have no problem connecting to my home network, I have not ever connected tot he one at work, just thought I'd try it when I couldn't get it to work at home.
1. Updating my LAN driver (I've tried numerous ones and the one that works best is the one that came with my windows XP)
2. Ran both Spybot and AVG to check on spyware/malware/virus and there was not a single thing on either one.
3. Tried many combinations of setup configurations with my home wireless set up. It is a password protected hookup that I have never had problems with before.So in seeing several posts on here I have the following information from my CMD
C:>IPConfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : gateway-ta06zkr
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
[code].....
View 11 Replies
View Related
Mar 5, 2011
I haven't had internet in a couple of months until recently when I got cable broadband and a TP-Link wireless router. The setup works fine with a ADSL cable but I can't get my laptop to connect to any wireless networks including my new router. If I run a windows troubleshooting diagnostic it says I have no preferred networks. If I go to "manage wireless networks" the box is empty and if I click "add" NOTHING happens. I can see my wireless networks in the networks box on the taskbar but when I click on them nothing happens (secured or unsecured) I'm pretty sure the problem is not with the router but maybe with the adapter or the pc itself. Others can connect to the wireless network
View 5 Replies
View Related
Jan 21, 2013
802.11n wireless adapter not being detected by the system
View 1 Replies
View Related
Jul 29, 2010
Any explanation about this warning from the WLC4402 after the software upgrade to 7.0.96. version? this is the message: Warning: WLC has detected its IP add xx.xx.xx.xx being used by a machine with MAC add xx:xx:xx:xx.and the MAC add found is the the mac add of the dynamic interface of the WLC.
View 7 Replies
View Related
Nov 14, 2011
Running Vista and cannot connect to the internet through the Atheros AR5B91. Can connect via USB adapter and LAN cable plugged in to router. Network discovery was custom, for some reason, but turned it off. Everything else in the house works, iphones, xboxes and another laptop with the same Atheros adapter.
View 2 Replies
View Related
Feb 7, 2011
Wireless connection suddenly stopped working. Ran Dell Wireless WLAN Card Utility and got "There are currently no wireless adapters available and enabled". Device manager states network adapter working properly. I have disabled, then enabled it and it still won't work.
View 4 Replies
View Related
Jan 6, 2013
I've formatted my HP 530 Notebook (using 'Operating System CD - Windows XP Professional SP2'). All went well. It was my first format but I read a lot on the internet, so I knew I had to download and install the chipset, the bus driver, the audio and video drivers, the network adapters, etc. This I did, on the HP website [URL].
Everything is working perfectly except for the internet. The device (a Broadcom wireless network adapter I installed from the HP website) is reportedly 'working properly', the HP assistant says that the Wireless LAN is 'ON', but my Broadcom wireless network wizard cannot find any network, let alone the network of my router. The Windows assistant is just as useless.
I've tried it all: uninstalling and re-installing, snooping around with 'ipconfig /all' and utilities like 'Everest', to start the Wireless Zero Configuration, to use other network adapters, installing SPs and patches, all that jazz. Apparently, everything is fine and 'working properly' - except that there's no network in sight.
Clearing up some questions:
- The 'Everest' utility says that the Interface Type of my wireless network adapter is 'Ethernet'. Isn't Ethernet supposed to be for cable connections?
- Needless to say, I've been back and forth with drivers a lot. Windows calls my wireless (non)connection 'Wireless Network Connection 2'. Is this in any way significant?
- I'm using 'Broadcom' because that's all I saw at the HP website. Should I try something else instead, like Atheros or Intel something-something?
I'm becoming a bit desperate, so if all else fails, I'm willing to reformat the computer (for the third time) and install the drivers you recommend to me in the recommended order.
View 14 Replies
View Related
Apr 4, 2011
My wireless printer has a permanent IP address but since I have changed broadband providers I do not know how to change this to the new network. The printer cannot be detected on wireless.
View 3 Replies
View Related
Mar 14, 2011
I am using HP dv9000 model laptop. Operating system is Windows 7. One month ago my laptop suddenly stopped detecting wireless card( It is working with Ethernet).
View 7 Replies
View Related
Apr 6, 2011
I have a an HP Pavilion dv6000t notebook running Windows Vista.I have a wireless router at home and connect to the wireless signal using both this computer and my other computer that I use for work. Yesterday, out of the blue, my laptop stopped connecting to my home wireless signal.It detects the signal, but when I click on it to connect (something I shouldn't have to do, as it is configured to connect automatically), I get a message saying that it couldn't connect and suggests that the signal strength is low.I know that the signal strength is fine as I am connected just fine on my work computer.I can plug my laptop into the router using a cable and it connects just fine that way, so the only problem is with the wireless signal. I have restarted the computer, modem, and router, to no avail.
View 3 Replies
View Related
Dec 7, 2011
I have installed Ver.1.0.03 (Build 14) Firmware on my E4200 I launch cisco and detct the printer fine prints fine but goes to offline and my scaner in that printer not work My printer is cx7400.
View 1 Replies
View Related
