D-link Dir-655 :: Wifi Signals Not Detected?

Mar 4, 2011

I have a problem on my DIR-652.My wifi signal is not detected over the past few days. I went through the settings, everything is good. Outside, in the page information device, wireless radio is off. How to put it ON?I am attaching the screen print.

View 2 Replies


ADVERTISEMENT

D-link 524 Router - Wifi Signals Are Not Detected?

Apr 1, 2013

I have D-link 524 router, my problem is that its signals are not being detected ( the devices we connect are ipad 4, htc wildfire S, nokia e-5 . these devices detect other wifi and connect to them.

View 14 Replies View Related

Cabling / Cards :: D-link 524 Router / Wifi Signals Not Detected

Apr 1, 2013

I have D-link 524 router, my problem is that its signals are not being detected previously it was working fine( the devices we connect are ipad 4, htc wildfire S, nokia e-5 . these devices detect other wifi and connect to them.

View 2 Replies View Related

Tp-link 150mbps Wireless :: How To Stop Wifi Signals

Jan 26, 2013

Region : Australia
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP :

I have TL-WR740N router. I dont know how to stop and start wifi signals.

View 4 Replies View Related

Wireless :: Tp Link Td-w8901g Modem Receive Wifi Signals Through Wan And Give Out Through Lan

Jan 31, 2012

I have a TP link TD-W8901g modem router with 1 wan and 4 LAN. My questions is can i use this modem to receive wifi signals through wan and give out through lan. i currently use internet from telephone cable. But i have got a free hot spot near my home. Currently i Am using a pc without wireless card.

View 1 Replies View Related

What Will Boost Wifi Signals Received From A Neighbors Wifi

Feb 14, 2013

I receive wifi from an unsecured Linksys tower near by what can I buy to strengthen that signal will a wifi signal repeater work

View 1 Replies View Related

Wifi Is Not Getting Signals

Jul 12, 2011

Wi-fi is blinking but not getting the surrounding signals

View 3 Replies View Related

Wifi Adapter Is Not Detecting Signals

Nov 20, 2012

Wi-Fi adopter is not detecting the signals? No view is available.

View 1 Replies View Related

1 Laptop Connected To 2 Wifi Signals

Apr 19, 2011

Can I connect my laptop to more than 1 wifi signals.

View 2 Replies View Related

Wifi Signals Drop Suddenly?

Aug 4, 2012

Well while browsing net on my mobile/laptop suddenly the Wifi get disconnected. But the wifi of access point does not drops. Its connected to the router in which wifi drops.Also the net on my desktop connected to the router via ethernet cable, does not go offline. I re,ain connected to net via Desktop even when wifi drops.

View 14 Replies View Related

Wag200g - How To Use Second Modem To Extend Wifi Signals

Feb 16, 2012

i have linksys modem modell wag200g annex-A and stc modem (saudi Telecom company) how can i expand wifi signal to other room

View 1 Replies View Related

Cisco Wireless :: AP 1242 AG Not Broadcasting The Signals / Weak Signals?

Apr 19, 2013

I have a WLC 4404. I added a new AP to the network and it is associated with the WLC now. But still its not braodcasting the ssids. I compared the configuration with the ones installed before and configuration is same.

View 9 Replies View Related

Use Wifi Booster To Boost Weak Signals In Network?

Feb 9, 2011

I have a Wi-Fi booster that can connect to remote distance networks, and I want to share the Wireless Networks that the booster connects to all the local computers in its range (maybe in Ad-Hoc?). The computer that has the booster has it's own separate built-in Wi-Fi.

For example, the booster gets a signal from Wi-Fi network A, and I want Network A to be broadcast to the computers who can't receive Network A's signal. I really don't mind how this is done, preferably without having to buy new hardware.

View 1 Replies View Related

Home Network :: Using A Wifi Booster To Boost Weak Signals?

Feb 9, 2011

I have a Wi-Fi booster that can connect to remote distance networks, and I want to share the Wireless Networks that the booster connects to all the local computers in its range (maybe in Ad-Hoc?). The computer that has the booster has it's own separate built-in Wi-Fi. Is this possible in Windows 7 Home Preium?

For example, the booster gets a signal from Wi-Fi network A, and I want Network A to be broadcast to the computers who can't receive Network A's signal. I really don't mind how this is done, preferably without having to buy new hardware.

View 1 Replies View Related

Macbook Pro And The Windows Side Wont Pick Up Wifi Signals?

Apr 15, 2011

i have bootcamp installed on my macbook pro and the windows side wont pic up my wifi signal. It did work once and then wen i had a mac update download ever since then the windows side wont recognize my WiFI name or pw,..

View 3 Replies View Related

Hp Pavilion P6340f Card Refuses To Find Any Wifi Signals

Jun 15, 2012

I used to have an HP Pavillion p6340f desktop computer, and then I decided to build my own. I moved the parts I'd installed in it over the years to the new build, plus the wireless card that came with the Pavillion. Strangely, with the same drivers and setup, the card refuses to find any WiFi signals - not the one it was connected to prior to the move nor the other networks around the area. Changing the drivers, uninstalling the device, rebooting - nothing will work. The symptoms are exactly the same as when I moved the card to another slot on the Pavillion.

View 8 Replies View Related

Wifi Is Not Getting Detected In Some Machines?

Apr 29, 2012

I am using Nokia Siemens router. Recently there is an hack on the network. So I changed the security by enabling WPA2-PSK and AES and mac filter enabled. After that two of my roommate machines are not getting connected to WiFi. Even I cant see ssid being detected in thier machines.

how to connect to the machines. I have tried by removing security also but those two machines cant even detect the network being broadcasted by us. But it is detecting other networks(neighbors wifi).

View 1 Replies View Related

No Wifi Network Being Detected By Hp G62

Mar 19, 2013

HP G62-b12SA Notebook PC, WINDOWS 7 (64 BIT). wifi card realtek 8191se.The wired LAN is working fine. but the wi fi is not detecting any wifi network leave alone joining.the laptop was bought in UK being used in India. The wi if was working fine till about one month back.Windows couldn't automatically bind the IP protocol stack to the network adapter.

View 13 Replies View Related

Wifi Not Detected In Some Machines

Apr 29, 2012

I am using Nokia Siemens router. Recently there is an hack on the network. So I changed the security by enabling WPA2-PSK and AES and mac filter enabled. After that two of my roommate machines are not getting connected to WiFi. Even I cant see ssid being detected in thier machines. how to connect to the machines. I have tried by removing security also but those two machines cant even detect the network being broadcasted by us. But it is detecting other networks(neighbors wifi).

View 1 Replies View Related

Wireless :: Wifi Not Detected In Some Machines?

Apr 29, 2012

I am using Nokia Siemens router. Recently there is an hack on the network. So I changed the security by enabling WPA2-PSK and AES and mac filter enabled. After that two of my roommate machines are not getting connected to WiFi. Even I cant see ssid being detected in thier machines. How to connect to the machines. I have tried by removing security also but those two machines cant even detect the network being broadcasted by us. But it is detecting other networks (neighbors wifi).

View 1 Replies View Related

Wifi Connection Detected But No Internet?

Dec 31, 2012

While there I had internet which was set up by a technician. However, now that I'm back, my computer shows that it's conected to the wifi here, but I am unable to get internet access. Is there perhaps a setting that could have been changed while I was in Peru that is preventing me from getting internet access in the U.S.?

View 5 Replies View Related

TP Link TD-W8961ND - Signals Are Constantly Dropping

Oct 29, 2011

I had an old belkin router and the net worked fine well the router would need to be restarted every week or so. But i got an upgrade and i now have a TP link TD-W8961ND The net is terrible its either there or not. have to keep refreshing pages ect .Could a setting possibly be wrong?

View 1 Replies View Related

D-link Router Picking Up Network Signals

Apr 25, 2012

I have tried to put a password on my dlink-615 wireless router, however, this attempt failed and as a result it is no longer picking up the next work signals from my modem.

View 1 Replies View Related

Is There Wireless Adapter That Will Pick Up Link-sys E1000 Signals

Feb 6, 2011

I got high speed internet last week and have very little understanding of networking. I think I need either a Wireless Access Point, Bridge or Converter. What I'm trying to do: I currently have a Linksys E1000..I have two computers that access this point via built in adapters in the computers. In another room are my gaming consoles and television that I would like to hook up to the internet as well. Is there a wireless adapter that will pick up my Linksys E1000 signal and let me plug ethernet cords into it so my consoles and television can access the network?

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8960N - Comparing Signals With Other Routers

Mar 9, 2013

Region : Peru
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build111108 Rel.40398n
ISP : Telefonica

I purchased this TD-W8960N cause I thought it was a powerful beast, but it is not unless mine it is defective. On my mobile phone it shows -25 to -30 dBm at less than 10 inches away from the router antennas. In some places at home my phone disconnects when the signal drops below -70bm, however my laptop it is always connected because of the better antenna.

That's fine BUT, I installed my old Linksys WRT54G and the phone shows -3dB at the same distance from the antennas. Or is it that I overvalued the TP-LINK?Does anyone have compared signals with other routers. Should I assume that mi router is defective? Any trick to squeeze more power other than replacing antennas?

View 2 Replies View Related

D-Link DIR-615 :: No Internet Connection Detected?

Jan 8, 2012

I have a working internet connection (AT&T) but it is not being detected during the router setup. Is there a manual setup procedure that I can try?

View 1 Replies View Related

TP-Link PCIe Network Card Not Detected

Nov 21, 2012

We a Q77 based Jetway JNF9E motherboard, and when we added a TP-Link PCIe network card it was not detected in device manager in windows XP. We tried a Dynamode card with a different chipset and that was also not detected. We then tried a PCIe Firewire card, and that was fine, indicating that the slot itself was OK.We then tried installing Windows 7-64, and that also failed to see either card. We updated the BIOS to the latest version, which had no effect. We then tried another PC with the same motherboard and that also showed the same problem. A USB network adaptor does work, but is not an ideal solution due to space contraints.

View 3 Replies View Related

D-Link DWM 152 Modem Not Detected After Unplug In Ubuntu

May 22, 2012

I use a modem d-link DWM 152,,at first be detected, was able to browse. connect the modem still keep fit (I forget if it still connect.), I just unplug it. when i plug it in again, the modem is not detected.

View 1 Replies View Related

D-Link DCS-942L :: Send Mail After Detected Motion?

Aug 19, 2012

When activating the option to send mail when motion is detected I am receiving mails permanently while I am at home and walking through the zone observed by the camera.

View 3 Replies View Related

TP-Link 3G/3.75G Router :: Huawei E367 Can't Detected In TL-MR3420

Apr 20, 2013

Region : Malaysia
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : Celcom

My HUAWEI E367 Can't Detect in TL-MR3420.I don't know what to do and I'm already downgrade the frimware but it still can't detect my broadband. Then, I upgrade the frimware and it still can't detect my broadband.

View 1 Replies View Related

D-Link DCS-942L :: Where On Live-picture Motion Is Detected

May 16, 2013

i still play with the motion detection feature of the 942L. Is there a way to see where on the live-picture the motion is detected?I do not see any motion on the srceen but the cam still detects motion and records every 60 seconds. Also i played with the sensitivity but without success. So i had the idea to ask the cam where on the screen the motion was detected...

View 1 Replies View Related

D-Link DCS-930L :: Camera Not Detected Anymore On Network

Nov 5, 2012

LED is solid red (front) and solid blue (rear). try resetting thru the pinhole button but problem still the same. Camera not detected anymore on my network. I've try switching on and off, problem still there.

View 4 Replies View Related

D-link Dir-655 :: Wifi Link Speed Fluctuates On All Devices

Jan 9, 2013

I have a DIR-655 that I have been using for a while (b1 revision).  and suddenly I noticed my wifi speed fluctuates constantly.  My lenovo Y580 sees speed drop to 130 immediately and then it can slowly progress to 1 Mbps until the hardware is all rebooted.  Same happens to my Nexus 7, Dell XPS M1530 and to my roku. I have updated to 2.07 (since 2.10 is advised to avoid). And I have attempted changing channels or factory refresh.What Firmware version is currently loaded? 2.07What region are you located?

What ISP Service do you have? Cable or DSL? Cable (link speed independent of internet speed)What ISP Modem do you have? Stand Alone or built in router? Separate Motorola ((link speed independent of modem)What ISP Modem make and model do you have? Does not matter, router issue.If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged.  Not bridged

Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.  Independent of issue, not a factor

Turn off all devices accept for one wired PC while testing.  Wired works perfect.Check cable between Modem and Router, swap out to be sure. Cat6 is recommended.  Wireless issue.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved