I openened my desktop, and now usb wireless adapter keeps dropping connection every minute for about 5 seconds?usb wireless adapter was working correctly before i oppened desktop.it doesnt have to do anything with software.is there something that i could have moved inside??
View 2 RepliesError 6 (net::ERR_FILE_NOT_FOUND): The file or directory could not be found. This is the messageI get when I try to open the bookmark page.
View 3 Replies View RelatedFirefox opens but no download sites open.
View 7 Replies View RelatedI just purchased a cisco ea4500 I have set up port forwarding for http, https, rdp. however when I run zenmap and port check it fails says port in use. I have set it up in sigle port forwarding, rang and port trigging. I tried RDP and VPN to machine that is hard wired and it fails as well. My windows server is connected as well however RDP fails on there to
View 9 Replies View RelatedI am trying to configure two AP-management interfaces to accept CAPWAP on different ports using the option "Enable Dynamic AP Management". One of them uses public ip address. However, I getting the message "Ignoring discovery request received on non-management interface ..." on this.
The controller is 5508.
I need to open the 443 port on my rangemax wireless router to enable credit card processing
View 1 Replies View RelatedI have a E1000 and already for the longest time I've been trying basically everything possible to get my NAT open from being strict.I've looked around and tried everything I came across including the port forwarding. The only thing different from what I have and from what I have seen is that my router's ip is 192.168.0.1 instead of 192.168.1.1 that everyone else seems to have. I don't know if that affects my NAT in any certain way either.
Why I can't get my NAT opened? Right out of the box, my NAT has always been strict. I'm thinking about returning all of my settings back to default and then trying everything over.
Region : Vietnam
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : VNPT on Vietnam
I have bought WR841 V8.3. Signal show is good, but i ping to router many timeout or delay when i open some website. Ping only geog when i near router.(some time delay)
I have a cable modem hooked up to a Linksys WRT54G2 wireless router, which is hardwired to the computer I use.
I go into the router's menu by going through the standard 192.168.1.1 in the browser, and then go to Applications and Gaming. The port I am trying to open is port 25565 for both TCP and UDP. In the Start and End ports I put 25565, and for the end of the IP Address, I put the last digits of my IPv4 address (10). I used a couple of port checker tools, and it is reporting as still being closed.
bought EA4500 router and successfully installed. The configuration of the desktop i use is - Windows 7 Home Premium SP 1, IE 9.0 and Chrome -23 Dual core Pentium, 2.5 GHZ, 2GB RAM Issue - Many websites, perticularly secured (HTTPS) are not opening up with new router. (Net banking, yahoo mail etc) I didn't face any issue with my old router which is WRT54GH, it is quite old router and did work excellent and working also. I had two calls with CISCO support team, they did check everything and came to conclusion that the issue is with router and asked to get it replaced. I did that but facing same issue. This time i connected my friends laptop to EA4500 along with my personal desktop. My company laptop has following configuration - Windows 7 Enterprise, IE 8.0 Dual core Pentium, 2.67 GHZ, 2GB RAM I tried yahoo mail, net banking websites on my desktop and friends laptop, these websites didn't open in my desktop but no issues faced on friend's laptop. I also noticed that cisco, apple sites are not opening on my desktop but no issue on friends laptop. I tried same thing with my old router WRT54GH, and all sites opened on both the PCs.
View 9 Replies View RelatedI have 2 laptop one is dell latitude e5430. Its wireless is doing problem... Whenever i connected my wireless i takes too much in opening website.... while on other one it is fine.... ON BROWSER ITS WAITING FOR GOOGLE.COM
View 1 Replies View RelatedRouter config and i just follow the instructions anyway i just bought this router cuz the old one failed and it was installed ok with internet connection and everything but when i open a program like bittorrent azureus the internet connection dies, it happens on my laptop and mac they both seem ok but when i open that program internet connection disappears
View 1 Replies View RelatedI need to receive a 15GB file from a friend, we are using xlight to transfer the file,I dont know much about all this but i am unable to open his ftp server which is(ftp://10.10.xxx .xxx:21).I havent yet installed xlight, i paste this site on my address bar and nothing happens, it gets timed out, i am only facing the problem others are able to access the site........AMD Phenom II 955 Black Edition | 4 gb ddr3 | 1 TB segate | Nvidia 9500GT(O.C)
View 4 Replies View RelatedThere is about 5 devices in my house that uses the same network. Two of them are Xbox's (One uses wireless, other uses wired). I've tried many times to open the NAT for the 2 Xbox's, but have never succeeded.I've read that enabling UPnP, will fix the problem; however I have tried that, and it does not work. If I want to open the NAT for just one Xbox, it will let me - I just port forwarded the required ports for the one Xbox. In my case, this isn't want I want.
View 1 Replies View Relatedi am trying to open a website in UAE [URL] . its opening in india very well but here its not working. it says connecting and after few minutes page displays network error or server busy.
View 4 Replies View RelatedWEBSITE DOES NOT OPEN
View 1 Replies View RelatedI want to open a certain port on my router and I know it shouldn�t be a problem, just go inside of your router settings and add the port manually. But somehow I was enough smart to forget my routers username and password, now my question is my only option a hard reset of the router and deleting all the work I put in to connecting the two computers with my router (believe me I had my share of troubles connecting them with the router) or is there a way to open the port on the router from my computer without accessing my router settings.
View 3 Replies View Relatedmy problem is net show its connected but cant open any psge. I have tried somany thinng as bellow.[CODE]
View 5 Replies View Relatedi can open all other web pages other than [URL]
View 1 Replies View RelatedI need opening up a particular website. The website name is [url].... Apparently, using various web based ping tools to ping the website doesn't work as they all get packet loss, so maybe the website is unpingable. However, upon using a proxy server or VPN, the website does open.
Here are the steps I've tried.Used a different OS (ubuntu)- didn't work.Tried on another system, different network, same ISP and it opened. It was an office connection.I did a traceroute on this and this stopped on the 3rd hop.Used various different DNS from google, to opendns, to my ISPs dns (airtel India).Tried different browsers, didn't work. My ISP gives out dynamic IPs. Is it possible to specify routing on this website through my router?
[code]....
I have a 851 that I'm trying to apply CBAC on. However, it seems that new sessions are stuck in SIS_OPENING. I'm guessing maybe because packets are not returned,I can't understand why - everything works just fine up-until I add ip inspect INBOUND out' on the WAN-interface.
View 19 Replies View RelatedWe have a DVR here at work that has a web interface on port 100. From our internal network we just use http:192.168.100.40:100. What is the best way to set that up on cisco 5510 firewall. I have cisco asdm and set a access rule: enabled=checked ; source=any ; destination= 192.168.100.40 ; service= tcp 100 ; action=permit. It shows a couple of hits when I go to [URL]
View 7 Replies View RelatedWhat I'm trying to do is to get my Xbox connected to the internet through my router (wired connection), but I want to have my NAT open also. But when I put in a static IP into the Xbox manually and open the ports in my router, it makes it so my Xbox can't connect to Xbox Live at all. Although, if I just leave it to the automatic setting on my Xboxs network options, I can connect just fine. But, I end up having a strict NAT type, unless I restore to factory defaults in the networking options on the Xbox.
View 2 Replies View Relatedthe cursor on my laptop started jumping all over on its own accord and I am struggling to gain control of it and various programs & windows are opening of their own accord. I assumed I had some form of Malware (I know very little about computers) so ran various removal scans and a few things were picked up but it continues to do this. My brother brought his laptop round so I could at least use the internet and after 5 mins of being connected to my internet his laptop started to do exactly the same cursor going all over and programs opening - his laptop was perfectly fine until he connected to my internet. Once he took his laptop back home on his own network it was working perfectly normal again.
View 2 Replies View Relatedhow can I open my port 80, 5000, and 22 in my modem.
View 1 Replies View RelatedSite is not opening in any of my systems in the local network. but if i change ip to a real ip or if i use some other internet source like netsetter then it gets opened.
View 1 Replies View RelatedFindout what is the Reason for does not Opening a bin Extension File?
View 1 Replies View RelatedI am not abel to open yahoo home page I tried all security option and also formate system but still not able to open yahoo all other web site like gmail rediff etc are working properly?
View 1 Replies View RelatedI have a ASA 5540 on which VPN is configured (Both SSL through Browser and Anyconnect) , everything was working fine but suddenly the webpage has stopped working and gives the page cannot be displayed error , moreover anyconnect client also fails to connect to the ip.
View 7 Replies View RelatedI'm having an issue on my Pix 501- ver. 6.3(5) firewall when host 192.168.1.2 accessing any website, no website is opening and when i issue command sh xlate so don't see anything and i think i must enable natting on this firewall as same as on ASA nat-control
[code]....
internet dongal , cant open autorunexe file as andriod not supporting so unable to set up internet dongal ?
View 1 Replies View Relatedwebpages not opening and showing some error
View 1 Replies View Relatedhow to open a site by using static ip address
View 2 Replies View Related