the cursor on my laptop started jumping all over on its own accord and I am struggling to gain control of it and various programs & windows are opening of their own accord. I assumed I had some form of Malware (I know very little about computers) so ran various removal scans and a few things were picked up but it continues to do this. My brother brought his laptop round so I could at least use the internet and after 5 mins of being connected to my internet his laptop started to do exactly the same cursor going all over and programs opening - his laptop was perfectly fine until he connected to my internet. Once he took his laptop back home on his own network it was working perfectly normal again.
the cursor on my laptop started jumping all over on its own accord and I am struggling to gain control of it and various programs & windows are opening of their own. I assumed I had some form of Malware (I know very little about computers) so ran various removal scans and a few things were picked up but it continues to do this. My brother brought his laptop round so I could at least use the internet and after 5 mins of being connected to my internet his laptop started to do exactly the same cursor going all over and programs opening - his laptop was perfectly fine until he connected to my internet. Once he took his laptop back home on his own network it was working perfectly normal again.
When using my laptop, my mouse will at times not move. Also when typing, the curser will jump from where you are typing to other areas on the page (to the middle of other words, beginning, or where?
Want to change DNS Server Address on PC. But when I go to change DNS address by going to Network Connections in Control Panel. Select current Local Area Connection and choose Properties, I get an error 'An Unexpected Error Occured'. Have tried resetting network again but still the same error
Trying to open my Outlook Express emails from old XP into Windows 7. Windows 7 says to verify my information which was emailed to me. However, I cannot receive email since I cannot get on to Live Mail.
A few days back I have changed the modem (don't know the previous model no) because of some issues. Since then I am not able to open most of the websites in Firefox, IE6/8, chrome, opera. If i connect with other network like reliance data card, those websites are opening, if i connect bsnl the problem will be same again. I called to customer care many times, but no use.
I have a 5508 WLC with CAP3502i APs connected to it. I upgreaded the code to the newest 7.2.115.1 code. I am having trouble with laptops that are not physically moving but are moving their connection from AP to AP in the same area. This is in a school and causing a problem with a testing program they are using becuse they drop 2 or 3 pings in the process. I do have the area heavily saturated with AP but that is because of the amount of clients we have connecting to them. There is 8 classrooms in a hallway with 24 laptops in each classroom. Each classroom has an 3502i ap in it. The laptop can be connected to an AP with great signal and move to another AP that still has a good signal but not as great. I don't understand why if I get 4 bars and connected at 144mps it would move to a new AP. These are Lenovo laptos and i have updated their wireless card drivers and set the roaming agressiviness to low but it still happens.
I need to receive a 15GB file from a friend, we are using xlight to transfer the file,I dont know much about all this but i am unable to open his ftp server which is(ftp://10.10.xxx .xxx:21).I havent yet installed xlight, i paste this site on my address bar and nothing happens, it gets timed out, i am only facing the problem others are able to access the site........AMD Phenom II 955 Black Edition | 4 gb ddr3 | 1 TB segate | Nvidia 9500GT(O.C)
There is about 5 devices in my house that uses the same network. Two of them are Xbox's (One uses wireless, other uses wired). I've tried many times to open the NAT for the 2 Xbox's, but have never succeeded.I've read that enabling UPnP, will fix the problem; however I have tried that, and it does not work. If I want to open the NAT for just one Xbox, it will let me - I just port forwarded the required ports for the one Xbox. In my case, this isn't want I want.
i am trying to open a website in UAE [URL] . its opening in india very well but here its not working. it says connecting and after few minutes page displays network error or server busy.
I want to open a certain port on my router and I know it shouldn�t be a problem, just go inside of your router settings and add the port manually. But somehow I was enough smart to forget my routers username and password, now my question is my only option a hard reset of the router and deleting all the work I put in to connecting the two computers with my router (believe me I had my share of troubles connecting them with the router) or is there a way to open the port on the router from my computer without accessing my router settings.
I openened my desktop, and now usb wireless adapter keeps dropping connection every minute for about 5 seconds?usb wireless adapter was working correctly before i oppened desktop.it doesnt have to do anything with software.is there something that i could have moved inside??
I need opening up a particular website. The website name is [url].... Apparently, using various web based ping tools to ping the website doesn't work as they all get packet loss, so maybe the website is unpingable. However, upon using a proxy server or VPN, the website does open.
Here are the steps I've tried.Used a different OS (ubuntu)- didn't work.Tried on another system, different network, same ISP and it opened. It was an office connection.I did a traceroute on this and this stopped on the 3rd hop.Used various different DNS from google, to opendns, to my ISPs dns (airtel India).Tried different browsers, didn't work. My ISP gives out dynamic IPs. Is it possible to specify routing on this website through my router?
I have a 851 that I'm trying to apply CBAC on. However, it seems that new sessions are stuck in SIS_OPENING. I'm guessing maybe because packets are not returned,I can't understand why - everything works just fine up-until I add ip inspect INBOUND out' on the WAN-interface.
We have a DVR here at work that has a web interface on port 100. From our internal network we just use http:192.168.100.40:100. What is the best way to set that up on cisco 5510 firewall. I have cisco asdm and set a access rule: enabled=checked ; source=any ; destination= 192.168.100.40 ; service= tcp 100 ; action=permit. It shows a couple of hits when I go to [URL]
What I'm trying to do is to get my Xbox connected to the internet through my router (wired connection), but I want to have my NAT open also. But when I put in a static IP into the Xbox manually and open the ports in my router, it makes it so my Xbox can't connect to Xbox Live at all. Although, if I just leave it to the automatic setting on my Xboxs network options, I can connect just fine. But, I end up having a strict NAT type, unless I restore to factory defaults in the networking options on the Xbox.
Site is not opening in any of my systems in the local network. but if i change ip to a real ip or if i use some other internet source like netsetter then it gets opened.
I am not abel to open yahoo home page I tried all security option and also formate system but still not able to open yahoo all other web site like gmail rediff etc are working properly?
I have a ASA 5540 on which VPN is configured (Both SSL through Browser and Anyconnect) , everything was working fine but suddenly the webpage has stopped working and gives the page cannot be displayed error , moreover anyconnect client also fails to connect to the ip.
I'm having an issue on my Pix 501- ver. 6.3(5) firewall when host 192.168.1.2 accessing any website, no website is opening and when i issue command sh xlate so don't see anything and i think i must enable natting on this firewall as same as on ASA nat-control
I have a DSL modem (custom made and branded by my ISP) which is receiving a DSL stream... it has an external IP which is visible to the world, say, 11.22.33.44 ... This modem has DHCP enabled, has an internal IP for itself, which is 192.168.1.1 .. it is connected to 2 laptops via and ethernet cable .. Laptop 1 has IP 192.168.1.2, and Laptop 2 has IP 192.168.1.3 ...On Laptop 1, two applications are running, jDownloader and Media Player Classic, which have their web interfaces on ports 8765 and 13579,respectively.. I can access both of these web interfaces from Laptop 2 by opening these addresses: 192.1681.2:8765 and 192.168.1.2:13579 ... both of their web interfaces open up, meaning the web interfaces are working fine ..Moving on, I now want to access these web interfaces from outside my network as well, and so I've configured port forwarding in my DSL modem to forward all traffic on ports between 8000 and 14000 (both TCP and UDP) to IP 192.168.1.2 ... I have verified that port forwarding is working by testing it using PortForward.com's port checker tool, and this website too: Open Port Check Tool - Test Port Forwarding on Your Router When I use the website, if I'm running the applications on Laptop 2, the website reports that the port is open .. if I then close the application, the website reports the port is closed ... This makes sense as nothing is listening on my machine in the latter case .. Also, if I disable port forwarding in my modem, again, the website reports the port is closed ... so, the website's results seem to be okay ...
Despite the above tools reporting that port forwarding is working, I am unable to open the web interfaces from outside my network ... So for example, if I tried to browse 11.22.33.44:8765 or 11.22.33.44:13579, nothing opens in my browser ... But if I accessed these web server's locally from Laptop 3, by typing in 192.168.1.2:8765 or 192.168.1.2:13579, they opened ... The tools report unanimously that port forwarding is working, and yet I am unable to open the web interfaces from outside the network ..Also note that I have disabled the firewall from my computer, and have also made sure that any option in the above programs (whose web interfaces I am trying to open) that says only local connections are to be accepted, is disabled ...
I am having some problem with fowarding some ports. Everytime I try to open a port, specifically 27015 it wont open. I go onto canyouseeme.com and it says there is no route to host. I have a Westell A90-750015-07. All of my firewalls are also turned off.
I've had this router for a few months after my last one died and I'm now completely unable to port forward. I follow all the steps to port forward but alas the port is still closed every single time. I've tried a few fixes in the past including disabling UPnP, using those auto port forwarding programs, and creating an exception for the port in my fire wall. Nothing has worked!
