Opening Ports 80 / 5000 And 22 In Modem?

Jan 16, 2013

how can I open my port 80, 5000, and 22 in my modem.

View 1 Replies


ADVERTISEMENT

Cisco :: Opening Ports On Firewall?

Apr 24, 2012

We have a DVR here at work that has a web interface on port 100. From our internal network we just use http:192.168.100.40:100. What is the best way to set that up on cisco 5510 firewall. I have cisco asdm and set a access rule: enabled=checked ; source=any ; destination= 192.168.100.40 ; service= tcp 100 ; action=permit. It shows a couple of hits when I go to [URL]

View 7 Replies View Related

Belkin F9K1002V2 Not Opening Ports

Apr 20, 2012

What I'm trying to do is to get my Xbox connected to the internet through my router (wired connection), but I want to have my NAT open also. But when I put in a static IP into the Xbox manually and open the ports in my router, it makes it so my Xbox can't connect to Xbox Live at all. Although, if I just leave it to the automatic setting on my Xboxs network options, I can connect just fine. But, I end up having a strict NAT type, unless I restore to factory defaults in the networking options on the Xbox.

View 2 Replies View Related

Cisco :: How To Open Ports 5000 And 5001

Mar 13, 2011

I need to open ports 5000 and 5001 on my Cisco PIX 501 to enable some users to be able to connect to our CCTV from outside, how should I open these 2 ports?

View 1 Replies View Related

D-Link DIR-825 :: Portforwarding Leads To Ports But Not Opening?

Jan 25, 2013

I've had this router for a few months after my last one died and I'm now completely unable to port forward. I follow all the steps to port forward but alas the port is still closed every single time. I've tried a few fixes in the past including disabling UPnP, using those auto port forwarding programs, and creating an exception for the port in my fire wall. Nothing has worked!

View 14 Replies View Related

Cisco WAN :: Opening Some Inbound Ports On PIX Version 6.3(5)

Oct 16, 2012

I have been asked to open some ports in order for a CCTV company to connect to an internal CCTV server on our LAN.
 
We have a Pix running PIX Version 6.3(5) I am ok configuring an ASA for the above but not a Pix.

View 2 Replies View Related

Cisco Firewall :: Opening Ports On 5505?

Jan 2, 2013

I am trying to configure a new 5505 but I am having difficulties opening ports that allow traffic in from the outside. My setup is Comcast Business Modem (w/ single static IP) -> ASA (10.0.0.1) -> (dumb) Switch -> NAS (10.0.0.10). I am attemping to open port 5001 to the NAS. I am very new to IOS so I have mostly been working in ASDM. Not sure if I am overcomplicating this for myself or what but I am stuck.
 
My running config is -
 
ASA Version 8.2(5)
!
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted

[Code].....

View 4 Replies View Related

Linksys Wireless Router :: Ports On Ea4500 Not Opening

May 25, 2012

I just purchased a cisco ea4500 I have set up port forwarding for http, https, rdp. however when I run zenmap and port check it fails says port in use.  I have set it up in sigle port forwarding, rang and port trigging.  I tried RDP and VPN to machine that is hard wired and it fails as well.  My windows server is connected as well however RDP fails on there to

View 9 Replies View Related

Cisco Firewall :: Opening Outbound Ports On ASA5505

Oct 2, 2012

I need to open some outbound ports in order for our CCTV company to receive alarms from our internal CCTV Machine.
 
The ip addresses of the company who access the CCTV are as follows:

213.130.134.56
81.130.198.97
 
The above are fixed IP addresses. The internal machine is on 192.168.204.170
 
The outbound ports that I need to open are the following:
 
TCP
21
23
80
5201
 
UDP
1025
2074
2075
 
I have access to the current config if needs be.

View 8 Replies View Related

Cisco WAN :: 8.0 (3) Opening Up Some Ports For Sftp Client At Work

Mar 23, 2012

I need opening up some ports for a sftp client at work. software version 8.0 (3) device manager version 6.1 (1)

View 4 Replies View Related

Cisco Switching/Routing :: Nexus 5000 - What Cause Loops On Ports

Dec 14, 2011

Any opinion on what could cause loops on nexus 5000 ports that are connected to esx hosts ?

View 3 Replies View Related

D-Link DIR-615 :: Opening Ports For Server Applications Like Ventrilo / Filezilla?

Mar 10, 2011

I've installed XAMPP on one of my Vista computers, and intend to use it as a server.  The internal IP address of the server is A.B.C.D.  The internal IP address of the DIR-615 is A.B.C.E.  whatsmyip.com says that external address of the server is F.G.H.I (and so is everything else inside my network).  I have Filezilla listening on port 21.  I've turned Windows Firewall completely off on the server, and my ISP (Time Warner / Road Runner) says that they never block any port.I tried going to the DIR-615 using Port Forwarding, and set ports 21 & 90 to forward to A.B.C.D, for both UDP & TCP, Allow All, Always.  That didn't work.I tried going to the DIR-615 using Virtual Server.  I set a virtual server on port 21 to A.B.C.D, for both UDP & TCP, Allow All, Always.  It made me turn off Port Forwarding, and it wouldn't let me use both 21 & 90 on the same rule, so made two rules.  That didn't work either.

I tried setting A.B.C.D as a DMZ host.  That still didn't work.I can ftp connect into A.B.C.D from one of the other computers in the network.  People outside the network can't connect to F.G.H.I.  I can't connect to F.G.H.I. from inside the network. The same is true of Apache (but ports 80, 81 & 443), Ventrilo (but ports 3784 & 6100) and MySQL (but port 3306).  I figure that FTP is the easiest to test, so I've been just trying to get that to work.In FileZilla Server Options, I am bound to *, I have no filters, and my passive mode is set to "Retrieve external IP"As far as I can tell, if I've ruled out anything inside my network (by connecting internally), and I've ruled out my ISP (they don't block), then it must be the router.  I think I've done port forwarding according to [URL], and it seems like it should be easy, but I've been trying forever and I can never get it to work.

View 3 Replies View Related

D-link Dir-655 :: Opening Ports - Getting Itunes Wifi Sync To Work?

Dec 27, 2011

I'm trying to get the silly iTunes Wi-Fi sync to work  , and I've been told to ensure that these ports are open:5297 TCP 5298 TCP/UDP and 5353 UDP in the hardware router.  How do I do this with the DIR-655 (HW version A3, FW version 1.35NA)?

View 1 Replies View Related

Belkin Routers :: F5D8233-4 V3 / Opening Ports 1701 And LT2P

Dec 4, 2012

I have a Belkin F5D8233-4v3 N Wireless Router. To get the wireless Directv connection, directv told me I have to get 2 ports open on my router.1701 and LT2P.

View 1 Replies View Related

Cisco Firewall :: 5510 - Opening Ports For Video Conferencing?

Nov 7, 2011

We have just acquired a cisco profile 42 video conferencing equipment and am required to open ports for SIP and H232, any pointers on hw that can be acquired i have a cisco ASA 5510, Some one told me to open port 16384 but i need pointers on how to do it becuase I already set an access list to any.
 
the config
 
Internet -> ASA 5510 -> Switch -> Profile 42 and other devices

View 5 Replies View Related

Cisco Firewall :: 5505 - Opening TCP Ports In ASDM Launcher

Jun 20, 2011

I am trying to open up 3 TCP ports in Cisco ASDM Launcher:
 
16000
16001
8098
 
And have a Cisco ASA 5505 Router.  I need these ports open in order for a software that I have installed on the server to communicate with my local client computers for my business,  The software is installed on Windows 2008 Server Standard Edition and was installed with MicrosoftSQL 2005.  The software and Microsft SQL 2005 is pretty much installed and just requires this last step in order for the server to be connected to the local  computers.  In order to resolve this, I have gone to.

View 1 Replies View Related

Cisco Firewall :: 5505 - Opening Ports On DHCP Outside ASA Interface

Feb 25, 2011

I am used to setting up access-lists on outside interfaces with ip addresses that are static. I have recently been given a site that is using a dyndns.org client for name to ip address resolution on an outside interface that is dhcp assigned. I created an access-list to open up ports 41794 and 41795 to an engineering application but everytime I try to connect from the outside I get a syn timeout. The application works when inside the lan. Basically I want to allow outside connections from anywhere on the outside to go to ports 41794 and 41795. I am running a Cisco ASA 5505 on version 7.2(4) Below is my conifg. what I may have misconfigured?
  
: Saved:ASA Version 7.2(4)!names!interface Vlan1 nameif inside security-level 100 ip address 172.31.2.1 255.255.255.0!interface Vlan2 nameif outside security-level 0 ip address dhcp setroute!interface Ethernet0/0 switchport access vlan 2!interface

[Code].....

View 5 Replies View Related

Linksys Wireless Router :: WRT54G2 - Port Forwarding Not Opening Ports?

Nov 20, 2011

I have a cable modem hooked up to a Linksys WRT54G2 wireless router, which is hardwired to the computer I use.
 
I go into the router's menu by going through the standard 192.168.1.1 in the browser, and then go to Applications and Gaming. The port I am trying to open is port 25565 for both TCP and UDP. In the Start and End ports I put 25565, and for the end of the IP Address, I put the last digits of my IPv4 address (10). I used a couple of port checker tools, and it is reporting as still being closed.

View 9 Replies View Related

Cisco Switching/Routing :: Simple Way Of Opening Ports On 1841 Router

May 12, 2012

Any simple way of opening ports on a 1841 router.I have a working config for internet traffic. I am looking to boot up my Windows Server and Run IIS.

View 1 Replies View Related

Dell :: 5000 Computer Still Not Connect To Modem

Jul 12, 2013

I have a Dell Dimension 5000 and I want to transfer the computer to connect via wireless. I have bought a wireless dongle installed all the sot wear but my computer will still not connect to the modem in my house. Is this particular model able to connect via wireless. Or do I need to install more software.

View 1 Replies View Related

How To Open Modem Ports

May 15, 2012

The problem is I don't know what to do to open my modem's ports because every single of them except of 80 is blocked,im having some latency problems on online games etc, I asked my ISP and they didnt probably understand what the port is they offered me changing my IP to PUBLIC IP for onetime payment, seeing as they probably dont know what the port is im confused now, will the public ip unblock the other ports?

View 19 Replies View Related

Open Ports For 2210 Modem?

Jan 31, 2011

Been trying for hours to open the ports on a motorola 2210-02-1022. I have a linksys wireless router. I think the default IP is 192.168.0.1 I put this in browser and get a user name and password window. What do I do from there. I have the port numbers from xbox.

View 2 Replies View Related

Can't Open Ports On Modem / Router

Oct 18, 2012

I am considered as a novice when it comes to networking, modems/routers etc.I have a Belkin Modem/Router, I need ports TCP 80, 2300 and UDP 2310 I think to be forwarded so I can play a certain game online (Age of Empires 3). I have tried DMZ mode for my pc and I can play the game online but only with DMZ enabled. Just some extra info.Belkin Modem/Router model : F5D7634-4A-H v2 (on the device)F5D7634-4-H v2 (01) (on the online settings (192.168.2.1))It has the latest firmware as I have clicked on the firmware update and it says "There is no new firmware update available for this Router!"

View 11 Replies View Related

Belkin F6D4630-4 V2 Modem / Router - Ports Won't Open?

Dec 12, 2011

I just want to open up a few ports for Age of Empires 3 but no matter what I do the ports still stay closed.I have a Belkin F6D4630-4 v2 modem/router (firmware updated to 2.00.25) and I use https:[url].... to check my ports.

I've forwarded the ports 2300-2310 in my router (both TCP and UDP) using the 'virtual servers' thing.

I've disabled windows firewall.

I've disabled my AVG antivirus.

I've disabled and enabled this thing to see if it would make a difference:
"UPNP Enabling:

Allows you to turn the UPNP feature of the Router on or off. If you use applications that support UPnP, enabling UPnP will allow these applications to automatically configure the router." When I probe the ports from 2280 to 2330 using the Gibson research website, the ports I forwarded (2300-2310) say 'closed' and the others say 'stealth'. Why do they say CLOSED and not OPEN? There shouldn't be anything blocking those ports.

When I probe the ports from 2280 to 2330 with windows firewall ON, all of them say 'stealth', even though I've added those ports to the windows firewall exceptions.I just want those ports to say "OPEN" so I can join all games on Age of Empires 3 instead of coming up with the message "Failed to join game".

View 19 Replies View Related

2wire With 4 Ethernet Ports / Modem Randomly Shuts Itself Off?

Jun 20, 2011

It is a 2wire with 4 Ethernet ports and wireless capability. I have a pc and xbox connected via Ethernet and a laptop and smartphone connected wirelessly. The problem is that my router randomly completely shuts off/resets itself causing me to lose connection. This happens both when things are in use and not in use.

View 3 Replies View Related

Routers / Switches :: Add Wired Ports To DSL Modem And Get Gigabit SubLAN

Jan 24, 2012

Adding ports to my Fairpoint provided Westell 7500 Rev D DLS modem router which has only 4 RJ45 ports. Bought a Linksys SE2500 gigabit smart switch but it doesn't assign IP or pass on router assigned IPs. Can't get ASSISTANCE from Fairpoint [successor to Verizon] configuring router or any advice on other ways to get more wired devices on LAN.For speed in backups I'd like 3 devices to be able to communicate at giabit speed Want to have an NAS and 2 Win7 Ultimate computers on smart switch, 3 other wired devices [WinXP, AT&T Cell tower, & DirectTV whole house SWM interface] and wireless on the router. 1. Are Fairpoint specs for DSL published so I could get another DSL modem router instead of the Westell or is it better to configure Westell as a router only and use a new to be acquired router with or without the existing or a new gigabit switch. I have a DI-624 from the pre-DSL Hughesnet satellite days.2. Are there less smart switches which would work better and let router assign the IPs?3. If this is too complex for me, can you recommend a remote access consultant to walk me through this for a fee?4. I'm 82, have been in computing since 1960, mainly in on-line end user environment mbut don't know the bridging, PPP PPoE differences, and implementation or configuration details of current hard and software except as a user.

View 2 Replies View Related

Setup Cable Modem / Router With Printer Attached To One Of LAN Ports?

Jan 25, 2012

Im trying to setup a cable modem which is also a router that has a printer attached to one of its lan ports. From there it connects to another router which connects to other clients from there i have another router with a VPN connection with other clients. I would like to be able to see everyone on the network. How do I setup the routers in particular the router with the vpn which is the last router. Also the vpn router is connected through its WAN port to the router ahead of it at its lan port so it can use its VPN connection.If it makes it easier lets ignore the cable modem as router and ill find the printer another way of connecting but essentially i need the two other routers for two ip addresses. One for the first router with my regular IP and then the other is for VPN IP.

View 3 Replies View Related

Routers / Switches :: How To Turn Off Ports For Torrenting On Qwest Pk5000 Modem

Oct 7, 2011

Ok, my roomate is hogging the bandwidth on our shared router downloading junk. I'm not sure if he's using a torrent, but just in case he is here is my question:How do I turn off the ports for torrenting on my qwest pk5000 modem? Is there anything else I can do that would work as well?My friend reccommended I turn off every port after 9000 or something.

View 3 Replies View Related

D-Link DIR-655 :: Router Only Works With Modem Plugged Into Output Switch Ports

Jan 16, 2012

this router of my girlfriends only works when iplug the dsl modem into the output ports what could possibly cause this. would a firmware upgrade straighten it out...

View 1 Replies View Related

DLink DSL 2640R Wireless Adsl Router / Modem - Create More Network Ports Upstairs

Jan 22, 2013

At home I have a D Link DSL-2640R wireless adsl router/modem in my downstairs office.I would like to use the cable which goes to upstairs of the house to link to some sort of extra router or switch in order to provide more network ports upstairs.

View 1 Replies View Related

FTP Sites Not Opening?

Jan 24, 2012

I need to receive a 15GB file from a friend, we are using xlight to transfer the file,I dont know much about all this but i am unable to open his ftp server which is(ftp://10.10.xxx .xxx:21).I havent yet installed xlight, i paste this site on my address bar and nothing happens, it gets timed out, i am only facing the problem others are able to access the site........AMD Phenom II 955 Black Edition | 4 gb ddr3 | 1 TB segate | Nvidia 9500GT(O.C)

View 4 Replies View Related

Opening NAT For 2 Xbox 360's?

Nov 29, 2011

There is about 5 devices in my house that uses the same network. Two of them are Xbox's (One uses wireless, other uses wired). I've tried many times to open the NAT for the 2 Xbox's, but have never succeeded.I've read that enabling UPnP, will fix the problem; however I have tried that, and it does not work. If I want to open the NAT for just one Xbox, it will let me - I just port forwarded the required ports for the one Xbox. In my case, this isn't want I want.

View 1 Replies View Related

Sites Not Opening In UAE?

Feb 9, 2012

i am trying to open a website in UAE [URL] . its opening in india very well but here its not working. it says connecting and after few minutes page displays network error or server busy.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved