Opening NAT For 2 Xbox 360's?
Nov 29, 2011
There is about 5 devices in my house that uses the same network. Two of them are Xbox's (One uses wireless, other uses wired). I've tried many times to open the NAT for the 2 Xbox's, but have never succeeded.I've read that enabling UPnP, will fix the problem; however I have tried that, and it does not work. If I want to open the NAT for just one Xbox, it will let me - I just port forwarded the required ports for the one Xbox. In my case, this isn't want I want.
View 1 Replies
ADVERTISEMENT
Nov 29, 2011
I have a E1000 and already for the longest time I've been trying basically everything possible to get my NAT open from being strict.I've looked around and tried everything I came across including the port forwarding. The only thing different from what I have and from what I have seen is that my router's ip is 192.168.0.1 instead of 192.168.1.1 that everyone else seems to have. I don't know if that affects my NAT in any certain way either.
Why I can't get my NAT opened? Right out of the box, my NAT has always been strict. I'm thinking about returning all of my settings back to default and then trying everything over.
View 9 Replies
View Related
Nov 15, 2012
Ive been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
View 4 Replies
View Related
Mar 10, 2011
My xbox has got a full signal but wont connect to xbox live.
View 1 Replies
View Related
Jan 24, 2012
I need to receive a 15GB file from a friend, we are using xlight to transfer the file,I dont know much about all this but i am unable to open his ftp server which is(ftp://10.10.xxx .xxx:21).I havent yet installed xlight, i paste this site on my address bar and nothing happens, it gets timed out, i am only facing the problem others are able to access the site........AMD Phenom II 955 Black Edition | 4 gb ddr3 | 1 TB segate | Nvidia 9500GT(O.C)
View 4 Replies
View Related
Feb 9, 2012
i am trying to open a website in UAE [URL] . its opening in india very well but here its not working. it says connecting and after few minutes page displays network error or server busy.
View 4 Replies
View Related
Sep 6, 2011
WEBSITE DOES NOT OPEN
View 1 Replies
View Related
Mar 3, 2011
I want to open a certain port on my router and I know it shouldn�t be a problem, just go inside of your router settings and add the port manually. But somehow I was enough smart to forget my routers username and password, now my question is my only option a hard reset of the router and deleting all the work I put in to connecting the two computers with my router (believe me I had my share of troubles connecting them with the router) or is there a way to open the port on the router from my computer without accessing my router settings.
View 3 Replies
View Related
Jun 17, 2011
my problem is net show its connected but cant open any psge. I have tried somany thinng as bellow.[CODE]
View 5 Replies
View Related
Aug 13, 2012
I openened my desktop, and now usb wireless adapter keeps dropping connection every minute for about 5 seconds?usb wireless adapter was working correctly before i oppened desktop.it doesnt have to do anything with software.is there something that i could have moved inside??
View 2 Replies
View Related
Apr 19, 2012
i can open all other web pages other than [URL]
View 1 Replies
View Related
Apr 28, 2011
I need opening up a particular website. The website name is [url].... Apparently, using various web based ping tools to ping the website doesn't work as they all get packet loss, so maybe the website is unpingable. However, upon using a proxy server or VPN, the website does open.
Here are the steps I've tried.Used a different OS (ubuntu)- didn't work.Tried on another system, different network, same ISP and it opened. It was an office connection.I did a traceroute on this and this stopped on the 3rd hop.Used various different DNS from google, to opendns, to my ISPs dns (airtel India).Tried different browsers, didn't work. My ISP gives out dynamic IPs. Is it possible to specify routing on this website through my router?
[code]....
View 3 Replies
View Related
Jan 3, 2011
I have a 851 that I'm trying to apply CBAC on. However, it seems that new sessions are stuck in SIS_OPENING. I'm guessing maybe because packets are not returned,I can't understand why - everything works just fine up-until I add ip inspect INBOUND out' on the WAN-interface.
View 19 Replies
View Related
Apr 24, 2012
We have a DVR here at work that has a web interface on port 100. From our internal network we just use http:192.168.100.40:100. What is the best way to set that up on cisco 5510 firewall. I have cisco asdm and set a access rule: enabled=checked ; source=any ; destination= 192.168.100.40 ; service= tcp 100 ; action=permit. It shows a couple of hits when I go to [URL]
View 7 Replies
View Related
Apr 20, 2012
What I'm trying to do is to get my Xbox connected to the internet through my router (wired connection), but I want to have my NAT open also. But when I put in a static IP into the Xbox manually and open the ports in my router, it makes it so my Xbox can't connect to Xbox Live at all. Although, if I just leave it to the automatic setting on my Xboxs network options, I can connect just fine. But, I end up having a strict NAT type, unless I restore to factory defaults in the networking options on the Xbox.
View 2 Replies
View Related
Nov 10, 2012
the cursor on my laptop started jumping all over on its own accord and I am struggling to gain control of it and various programs & windows are opening of their own accord. I assumed I had some form of Malware (I know very little about computers) so ran various removal scans and a few things were picked up but it continues to do this. My brother brought his laptop round so I could at least use the internet and after 5 mins of being connected to my internet his laptop started to do exactly the same cursor going all over and programs opening - his laptop was perfectly fine until he connected to my internet. Once he took his laptop back home on his own network it was working perfectly normal again.
View 2 Replies
View Related
Jan 16, 2013
how can I open my port 80, 5000, and 22 in my modem.
View 1 Replies
View Related
Jan 25, 2013
Site is not opening in any of my systems in the local network. but if i change ip to a real ip or if i use some other internet source like netsetter then it gets opened.
View 1 Replies
View Related
May 6, 2011
Findout what is the Reason for does not Opening a bin Extension File?
View 1 Replies
View Related
Dec 14, 2011
I am not abel to open yahoo home page I tried all security option and also formate system but still not able to open yahoo all other web site like gmail rediff etc are working properly?
View 1 Replies
View Related
Jul 14, 2012
I have a ASA 5540 on which VPN is configured (Both SSL through Browser and Anyconnect) , everything was working fine but suddenly the webpage has stopped working and gives the page cannot be displayed error , moreover anyconnect client also fails to connect to the ip.
View 7 Replies
View Related
Jun 21, 2011
I'm having an issue on my Pix 501- ver. 6.3(5) firewall when host 192.168.1.2 accessing any website, no website is opening and when i issue command sh xlate so don't see anything and i think i must enable natting on this firewall as same as on ASA nat-control
[code]....
View 5 Replies
View Related
Feb 23, 2013
internet dongal , cant open autorunexe file as andriod not supporting so unable to set up internet dongal ?
View 1 Replies
View Related
Sep 2, 2011
webpages not opening and showing some error
View 1 Replies
View Related
Jan 29, 2012
how to open a site by using static ip address
View 2 Replies
View Related
Jun 23, 2011
I have a DSL modem (custom made and branded by my ISP) which is receiving a DSL stream... it has an external IP which is visible to the world, say, 11.22.33.44 ... This modem has DHCP enabled, has an internal IP for itself, which is 192.168.1.1 .. it is connected to 2 laptops via and ethernet cable .. Laptop 1 has IP 192.168.1.2, and Laptop 2 has IP 192.168.1.3 ...On Laptop 1, two applications are running, jDownloader and Media Player Classic, which have their web interfaces on ports 8765 and 13579,respectively.. I can access both of these web interfaces from Laptop 2 by opening these addresses: 192.1681.2:8765 and 192.168.1.2:13579 ... both of their web interfaces open up, meaning the web interfaces are working fine ..Moving on, I now want to access these web interfaces from outside my network as well, and so I've configured port forwarding in my DSL modem to forward all traffic on ports between 8000 and 14000 (both TCP and UDP) to IP 192.168.1.2 ... I have verified that port forwarding is working by testing it using PortForward.com's port checker tool, and this website too: Open Port Check Tool - Test Port Forwarding on Your Router When I use the website, if I'm running the applications on Laptop 2, the website reports that the port is open .. if I then close the application, the website reports the port is closed ... This makes sense as nothing is listening on my machine in the latter case .. Also, if I disable port forwarding in my modem, again, the website reports the port is closed ... so, the website's results seem to be okay ...
Despite the above tools reporting that port forwarding is working, I am unable to open the web interfaces from outside my network ... So for example, if I tried to browse 11.22.33.44:8765 or 11.22.33.44:13579, nothing opens in my browser ... But if I accessed these web server's locally from Laptop 3, by typing in 192.168.1.2:8765 or 192.168.1.2:13579, they opened ... The tools report unanimously that port forwarding is working, and yet I am unable to open the web interfaces from outside the network ..Also note that I have disabled the firewall from my computer, and have also made sure that any option in the above programs (whose web interfaces I am trying to open) that says only local connections are to be accepted, is disabled ...
View 2 Replies
View Related
Jul 12, 2012
Want to change DNS Server Address on PC. But when I go to change DNS address by going to Network Connections in Control Panel. Select current Local Area Connection and choose Properties, I get an error 'An Unexpected Error Occured'. Have tried resetting network again but still the same error
View 2 Replies
View Related
Feb 2, 2011
I am having some problem with fowarding some ports. Everytime I try to open a port, specifically 27015 it wont open. I go onto canyouseeme.com and it says there is no route to host. I have a Westell A90-750015-07. All of my firewalls are also turned off.
View 14 Replies
View Related
Jan 21, 2013
Error 6 (net::ERR_FILE_NOT_FOUND): The file or directory could not be found. This is the messageI get when I try to open the bookmark page.
View 3 Replies
View Related
Nov 12, 2012
Firefox opens but no download sites open.
View 7 Replies
View Related
Jan 25, 2013
I've had this router for a few months after my last one died and I'm now completely unable to port forward. I follow all the steps to port forward but alas the port is still closed every single time. I've tried a few fixes in the past including disabling UPnP, using those auto port forwarding programs, and creating an exception for the port in my fire wall. Nothing has worked!
View 14 Replies
View Related
Mar 12, 2013
I have a N7110 laptop and it wrote on the box that it has bluetooth. How do i enable it? I pressed the button with the two gears (above the numberpad). It gets me to
after that, i click the "enable" button under the bluetooth icon. Nothing happpens... I click it again...Nothing. How do i enable it then?
View 1 Replies
View Related
Apr 5, 2012
my friend was against a wall trying to update her office's system, and it seems like every Cisco person in the region has gone on vacation.For some sort of new system her office is getting, she was told that she needed to enable NAT with external IP xxx.xxx.xxx.14 (The ASA's IP is xxx.xxx.xxx.11) and internal IP xxx.xxx.xxx.58 and that port 8222 needs to be open. I know this is sort of vague, but it's what she was given, and I know the 8222 port is very specific in function,?
At any rate, the best I could come up with was to run:
static (inside,outside) xxx.xxx.xxx.58 xxx.xxx.xxx.14 netmask 255.255.255.255
access-list inbound extended permit tcp any host xxx.xxx.xxx.11 eq www
access-list inbound extended permit tcp any host xxx.xxx.xxx.11 eq https
access-list inbound extended permit tcp any host xxx.xxx.xxx.11 eq 8222
access-list inbound extended permit udp any host xxx.xxx.xxx.11 eq 8222
access-group inbound in interface outside
But after I inserted this, she did what she was supposed to be able to do (went home and tried to run some sort of remote installation file) and it didn't work...
View 8 Replies
View Related
