This is 1st attempt at home networking:win xp pro to win 7 ultimate.can get both devices to ping and receive both by ip address and computer name.both devices seen in each others workgroup view. cannot open either device from the other device.file and printer sharing is on on both machines.
View 1 RepliesI have a small Windows XP Workgroup network. We have a large folder on the server with over 10,000 image jpgs. Up until six months ago it opened fine, but now when I try to open this folder from any of the workstations it takes several minutes.I've tried unsuccessully many of the proposed fixes over the past few months included changing the RAID controller and this is my last resort.
View 1 Replies View RelatedI have two computers on a wired network, for simplicity I'll call them computer "A" and computer "B".Computer "A" is running Windows Vista Home Premium SP2, and computer "B" is running Windows XP Home Edition SP3.I can no longer get folders from "B" (XP) to open on "A", I say no longer because I used to be able to get them to open.The folders from "B" appear on the wired network okay when viewed on "A" but when I try to open them I get the message as in the enclosed attachment.I have tried switching off the Firewalls on both computers but that has not worked.
View 5 Replies View RelatedI'm currentlly running Both Wired and Wireless GPO via Win2008r2, on my WIRED connections after clt-alt-del logoff my network connection stays open (pingable)While connected via wireless (WLC 5508 and WCS) Windows AD 2008r2 ;Radius Server 2003.
All Clients authenticate using Network Authen (Wireless Network Connection Properties) WPA2 Data encryp AES EAP type PEAP.Authentication Method (EAP-MSCHAP) I have no problems connecting via SSID etc... my Question is how do I keep the TCP connection open after initiating a logoff from Windows. (Closing network connection) OPEN!
I need to maintain a tcp(pingable) connection open in order to access Manufacturing clients that are connected via WIFI. (WLC).All wireless clients are issued and auto-enrollment cert via IAS .
network adapter does not show up under device manager windows xp
View 4 Replies View RelatedI have an i7-2700K system with MSI Z68A-GD80 MB running on Window 7. Awesome system. Only one issue. The Network Adapter section keeps disappearing from Device Manager, causing my ethernet to fail, no lights on either of the RJ45 ports with cable plugged in. All of the latest drivers are installed. I've Googled it and see others with the same problem and have followed the "temporary" solution - shut down the system, unplug it from the power supply, yank the memory out, press the power button with PSU unplugged to "bleed" the caps (or use the pwr/reset button on the MB before shutting it down), let it sit for several minutes (it takes mine at least an hour, so I'm thinking the system needs to be completely cooled down) and then put it all back together and turn it on. Network Adapter section shows up again, Ethernet lights return, internet works again.
This works until the next time the system shuts down and then I have to do this all over again. Extremely annoying problem. I'm not sure if it's a faulty MB or if there's an actual permanent fix.
is there any way of getting the DCS-2121 cameras to register as a windows "video" device? I am running windows 7 and would like to use the remote cam as a video device in a desktop app - Microsoft OCS.
View 1 Replies View RelatedLMS 3.2 can't open Manu Device Troubleshooting only begin I will check manu Device Troubleshooting but LMS 3.2 can't show detail about Device and show error on windows.I need fuction Device Troubleshooting becouse ATP customer.
View 1 Replies View RelatedI'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
I have a wireless network (cable modem and router) set up in my home, which all of my devices are able to connect to the internet just fine, all but two; one is a netbook and the other is a desktop. The netbook has a wireless card built in, and the desktop has usb wireless card. Both of devices are running xp (both are the only compters in my home ran on xp), and these are the only two devices that will not connect to the internet wirelessly, except for when the wireless is unsecure these two devices connect fine, but once I enable a password these two devices say connected with an excellent signal strength, but once I open up the brower no web page comes up (just a message saying server not found). These two computers are able to install automatic program updates from over the internet, but still no web page will come up.
View 3 Replies View RelatedI have a say 'server', with win xp running on it. I want to open a port on the system so that that computer can be accessed within the network domain. for example when i open an internet explorer browser and type in [URL], i need to be able to connect to the /mls.net/eclispe.aspx present. so for that i have to be able to open a port
View 1 Replies View Relatedi cannot open shared folders in LAN in win 7 its in work group and shared folders do show but on clicking on it it doesn't open says contact network admin i changed the group policy LAN management also checked the advanced sharing properties but i still have the prob not just in one comp but all of my 8 comp
View 1 Replies View RelatedI can't open the Ryanair website any more, everything else is working properly. This happened during spanish general strike when their website may have crashed, but since then it wont open. I am using Google chrome.
View 1 Replies View RelatedI've got a Belkin wireless router and Windows 7. It's so I can use the application Gameranger as it requires UDP Port 16000 open. I don't have a static IP if incase I needed one tell me how to do that to.Here's the Gameranger link here:
View 2 Replies View RelatedI have done any and everything just to even open a specific port on my pc and try PortForward's port checker and web based checkers, and I can't get the port or any port to show as open.I am trying to make an IP webcam on my network viewable from the internet.My setup is like this"gigaset 204a" / DSL modem (Ethernet cable goes into internet port on LINKSYS WRTGS wireless router) [code] Disabled I went to LINKSYS port forwarding, the address I am forwarding to is the ip webcam server. I know if the IP changes it won't work, but before thinking of setting up a static ip for the webcam on my network, I need to get it to actually work.Nothing I do will open any ports on my pc. I've tried enabling DMZ. I've even set rules for windows firewall to allow incoming/outgoing connections on the port I want, i've disabled windows firewall. am running on windows 7 ultimate. The problem for my really is as far as I can tell, I can't even open a port to allow connections to my computer from the outside. Of course all my internet games etc work fine and have never had a problem, but I can't seem to manually open a port I want.
View 4 Replies View RelatedI upgraded the firmware on my wrt54gs this morning and after the upgrade i have a light on the front where it says ( Cisco Systems ) is this anything to worry about?the upgrade was from Ver.3 to Ver.4.Ubuntu 11.04 on a Fujitsu lifebook t4210 tablet pc.in a world of open source who needs windows and gates
View 7 Replies View RelatedWindows cant communicate with the device or resource(primary dns server). The device or resource is not responding to requests.
View 4 Replies View RelatedI have had clearwire for a few years, about 2 months ago the internet started being weird. It would go slow, only load part of a page or disconnect completely. Now I cant get on at all. Not with my HP laptop, not with my daughters iPad, my husbands HP, ipod and not even if I hook up directly to the router. I have gone through 3 modems and 2 routers trying to fix this, but nothing has changed. When I run a trouble shooter, under "Problems Found", it says, "Windows cannot communicate with the device or resource. (primary DNS server)" I am currently on my computer at another location, every device we have, can get on the internet at other locations.
View 1 Replies View RelatedI am trying to set up my computer with my old connection. I use my laptop (acer aspire 5742ZG) and before I moved out it worked like it should have. Then while in the other town I needed to set up my connection, this time by myself (through some sort of interface in 192.168.1.1). Now that I'm back next thing happens: I appear to be online, I am online on skype (can chat, and people chat back) but when it comes to connecting to the internet through the browser or an online game I play it's not responding, as if there is a problem.I use windows 7, so the troubleshooting software reports what's in the title.The problem is not with the connection - 3 computers are connected to it, 2 with cable, 1 wireless. I would use wireless too, but I am too far away from the modem (it's in another house, and I have a long cable which works, posting from the desktop computer connected to it). [Code]
View 8 Replies View Relatedi have a home computer. windows xp. i have a virgin mobile broadband chip that i have always been able to plug n to the usb slot on bck of computer and it pulls up the internet with no problems. i tried to get on the internet and it keeps telling me that the device isnt detected. i troubleshot,lol. and windows tells me to go to control panel, network connections, LAN or high-speed internet, the problem is i only see 3 g and local internet connection?
View 12 Replies View RelatedI get 2 troubleshoot messages printer cannot be contaacyed over network and windows can't find a computer or device named....
View 1 Replies View RelatedProblems have arisen since purchasing a new laptop with Windows 7. The problem seems erratic. The laptop connects to file servers on the network, but often cannot connect to the network. If it connects, often connection is lost when clicking to a new page.Usual error message: "Windows can't communicate with the device or resource (primary DNS server)"Network map shows communication lost between ADSL and network.Direct Hard wire connection to internet through ADSL works without issue. Hardwire connection through DIR-655 same as wireless: erratic, error messages. This message posted from another wireless router, specifics not known, connected without issue, on-line for 3 hours without problems.
-IP address: no difference between using automatically obtained or assigned IP address
-DNS server: no difference between using automatically obtained or assigned IP address
Router setup numerous times using CD ROM set up program.Firmware updated to the most recent version.Gone to tech support several times; can get the PC to connect and once done, tech support says its working only to disconnect within a few minutes.What must I do to get this DIR-655 router working on a regular basis?
My Samsung phone is working as it should as an USB device (using KEIS and such). However though it receives ip address from DIR-655 router and is registered by MAC address in router - also possible to ping its IP from windows I cannot see it in /Network from my WIN7 64bit OS? The desktop comp is wired to the router, phone is on wireless.
I ve tried several settings and almost had it. It did work some months ago...
From log; "SSID": Wireless system with MAC address XXXXXX secured and linked" (That is my mobile phone)
after installing xp my wireless card doesnt show in device manager
View 8 Replies View RelatedI have a SB6121 Motorola Modem for my Comcast Service.The modem is supposed to give out an ip range of 192.168.100.11-40When I reboot the modem I temporarily get a 192.168.100.12 IP address but then somehow it changes to a 68.42.83.47 ip.I can't get it to stick on the 192.168.100.x network so I can't access anything.Before I had my pc connected to a Netgear Router which received the internet from the SB6121 but I am needing to troubleshoot some issues with a freePBX server so I plugged straight into the gateway.
View 2 Replies View Relatedsometimes my net will randomly dc and wen i trouble shoot it says "windows could automatically detect this networks proxy" and then when i go to diagnose it says "your computer appears to be correctly configured but the device or resource (dns server) is not responding.
View 17 Replies View RelatedThis device is not working properly because Windows cannot load the drivers required for this device. (Code 31)Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.Plug and Play ID.When I test it says the adapter is working properly. I don't know if this matters but I am unable to get microsoft updates. I have 16 that continue trying to update but my computer will not allow.
View 8 Replies View RelatedI had installed the aheros AR5B97 wireless network adapter in wondows 7, but it was not properly installed and the wireless service icon is not displayed in the network profiles.when i checked it in the device manager it showed a device status that:Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
View 1 Replies View RelatedI have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedDell Wireless 1390 WLAN MiniCard on my Inspiron 1521 with WINDOWS 7 does not show in the device manager. There is a popup window that says Driver blocked due to incompatibility.Ive tried to install new drivers but it doesn't work.
View 3 Replies View RelatedI installed Windows 8 on my Dell laptop and my bluetooth device doesn't work properly. When Windows 7 was installed and my laptop and my Samsung Galaxy S3 were paired I could play songs from my phone on my computer. But now it is not possible on Windows 8.
View 1 Replies View RelatedI currently have a BT Home Hub 3 router and an Ubiquiti Power AP N.What I am trying to do is use the Ubiquiti access point as the main device for all connections in my house (ethernet and wireless) so that I can use the QoS settings etc. I basically want the Home Hub router to play as little role as possible in the network except for providing the ADSL internet connection.I know I need to enable DHCP on the access point but everytime I do so the devices connected to the access point lose internet connection.(BTW I have an ethernet cable connected from one of the routers LAN ports into the access point's WAN port)
View 2 Replies View RelatedI want to start using a VPN and would rather have my own server for it so was going to buy a kimsufi 2g with ubuntu installed on it, Have been looking on the openvpn website but cant find any tutorials on how to setup openvpn on ubuntu.
View 1 Replies View Related