Deleted A Ping File Now Cannot Connect To The Internet?
Dec 30, 2011
I got a trojan and removed most of it with Malware Bytes. My computer was still acting squirrely so I read that I needed to delete a ping file. I did and can no longer connect to the internet. It just sits and tries to acquire the IP address. I have reset my winsock and tried uninstalling and reinstalling my network drivers etc..
I accidentally deleted the network protection key from my laptop and now can't access the internet. I have tried re-entering it but still can't connect to the internet.
I can connect to the internet after 5mins or so after booting up but after that internet will not respond at all.i need to restart again my PC in order to connect again to the internet i somehow manage to bump with this solution using ping command.whenever i boot my pc i need to open this command and i can surf the internet without getting my connection lost just as long ping command is open.
I have a netger router/moden connected to my phone line for broadband, an ethernet cable coming out of that to a netgear switch an then a cable going from the switch to fa4 on the 861. I can ping the netgear router from the 861, however, when I connect my PC to it, I am unable to ping let alone connect to the internet, the PC is getting an IP from the 861 and I can ping the fa4 interface from the pc. I just don't understand my I can not ping the broadband router, I even added a static route to the netgear with no luck.
Connecting The Internet by Ethernet Lan-cable (without a router), ping to Yandex.ru is 4 ms. If we connect by router ping is 27 ms. If we ping by web-interface it is 4 ms. Connecting by Wi-Fi it is 27 ms.I' ve substituted the cable connected router and computer. So my questions are: why ping is rising when I connect to the Internet by router?
From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
I tried everything to try and figure out how to somehow install those drivers, been to hp website, installed an updates BIOS all this and nothing...I installed the HP wireless assistant, and now the enable,disable touch for my laptop works, but it never enables, the touch works now, but i dont have an option inside the wireless assistant to enable it, only says disable and it isnt clickable
I was trying to fix a diagnosis error under my Internet Connection stating your computer appears to be correctly configured, but the device or resource (DNS server) is not responding. I thought maybe going to Device Manager while showing hidden files selected then go to non plug and play, and then I deleted NetBT, and then a PC reboot. I was very wrong because I have no Internet, and honestly, I only have one PC.I have Windows 7 Home Premium Anytime Upgrade that I bought. It's a 32-bit OS.
My emails were deleted from Inbox as I was using Hotmail on 8/17/2011. I did not initiate this action. Those emails contain very important information and I need to retrieve them if possible. I am worried this was done by a hacker. I have Vista Business version.
WLC 4404 is configured as Anchor controller, the MAC violation are captured by Controller. the Violated MAC are deleted manually through GUI, but when tried deleting through CLI using command
>Config exclusionlist delete <mac address>
we get error message as error deleting user <mac address>
I need to connect two LANs together with hardware VPN, for some file sharing. I was thinking to use a Linksys router and a dedicated ADSL line at each site, in order to setup the VPN. There is also an extra ADSL connection at each site for user internet access. how am I going to separate the two, without having to install two network cards on each user PC?If I set the user's gateway to the VPN or the internet router, how can I use the other?
would like to know is dre a way to retrieve a message deleted from my gmail and yahoo account a month back and now i want to recover it. And if yes then how and if no then aftr seleting any mail from trash till wat time period can we reover the mail if possible?
installing IOS for cisco 4503 e catalyst switch. The base ios image file has been deleted. Installing the ios and from where can I download the ios verison.The device has 2 10 Gig uplinks and I have access to console of the device.when i boot up the device it comes "rommom >"I do have tftp server and i have also configure the IP in fast ethternet mgmt port.
I am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
I've been pulling my hair out for several weeks trying to connect to a Filezilla server on Windows Vista through my Netgear WGR614v9router.I have received a domain name for dyndns.org and the IP address resolves correctly on the remote computer using the Filezilla client but my computer doesn't respond. I have set up the FTP port to be on 21 and have allowed Filezilla through my firewall on Windows Vista.
I am trying to connect my file server to my desktop and laptop through a workgroup, however while my Laptop and desktop recognize each other, they will not recognize the file server. I have tried what I can including setting firewall exceptions and even disabling it and nothing will change. Both the file server and desktop run Windows XP SP3 while the laptop runs Windows 7 Home Premium. the file server is connected to a 5-port router which is then connected to a 10-port hub that is connected to the gateway, while the laptop and desktop are connected to a different 5-port router which is connected to the same 10-port hub. I am saying thing also because I think it is a hardware problem since the laptop/desktop can connect perfectly as they are on the same router.
i deleted my xbox 360 local area connection from my computer i have windows 7. how do i get my xbox 360 back on my computer and share a connection with it cuz befor when i tryed to share it. it said......(Internet connection sharing cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing.)
I have 2 NICs in my Windows 7 PC at work.NIC #1 connects to our private network and is also how I connect to the internet. NIC #2 connects to our customer's network and does not allow internet connectivity for me.When I first boot up my Windows 7 machine I get the following info in route print:Despite the fact that I have a persistent route with metric 1 to send my internet traffic to the 172 subnet, the internet requests go to the 10 subnet. I am guessing that is because the non-persistent route to the 10 subnet has a metric of 20 vs. the 21 for the 172 subnet. I delete the route 0.0.0.0 mask 0.0.0.0 10.242.1.254 and I am able to connect to the internet again.HOWEVER, after something like 4-6 hours, (without rebooting) the bad route automatically reappears in my route table! I become aware of it because I suddenly have connectivity problems. There are no entries in the Windows Logs that seem to be related (i.e., no DHCP renewal requests.) so I do not know how or why it reappears.