dell 3000 xl os 149gb I set up a home office. to try to transfer files to my new one.oce i found out you can't do it. there was a group policy in place.how do i get rid of it. it's interfering with a lot of stuff, including my firewall. had to buy another.
View 3 RepliesI try to map LDAP Group to ASA Group policy following documentation:
[URL]
This is a config for ASA 8.0. I would have expected it to work on 8.4 as well but I do run into problems. The mapping as shown in LDAP Debug and ASA Log will actually happen but it is overwritten by the "GPnoAccess" Group Policy configured locally in the Tunnel Group. From earlier works with RADIUS I would have expected the user specific Attribute to be "stronger"?
ASA Log:
AAA retrieved user specific group policy (correct Policy) for user = XXX
AAA retrieved default group policy (GPnoAccess) for user = XXX
how to disable usb using group policy
View 1 Replies View RelatedI want to block a website timely using group policy on window server 2008.
View 1 Replies View RelatedI have 4-5 machines connected to each other in network which are in workgroup. Now I want to change one group policy on remote machine. The name of that policy is " Network access: sharing and security model for the local accounts :- Guest only" . How can I change this policy from remotely?
View 1 Replies View RelatedIs it possible via Group Policy to prevent the domain computers from automatically creating default favorites when the users log in? Currently on the Favorites Bar it creates "Web Slice Gallery" and "Suggested Sites", as well as a "Websites for United Kingdom" folder. The domain controller is running Windows Server 2008 R2, and the clients are running Windows 7.
View 4 Replies View RelatedI have a Cisco ASA (8.2) with several group-policies setup. By default, I can hit the SSL page, and have a selection of available group-policies for a user to login to. I want to have different ACLs for each group, to go along with the subnet that each particular group hands out. Right now, as long as a user is authenticated through AAA, they can log in to any group they select, and therefore, have more permissions than another group.
I know how to hide the list, but I need to be able to assign a specific group to a user based on an attribute in ACS.
I've setup ACS to use the "CVPN3000/ASA/PIX7.x-Tunnel-Group-Lock" Atttribute, to which I match the group-policy name in the ASA, to the attribute on the user account in ACS.This doesn't seem to work, and it just throws the user into DfltGrpPlcy, which doesn't give the user anything. So it's either wide-open, or it's broken.
I'm using RADIUS authentication and not TACACS, so it should retrieve the attributes, and according to the ACS, it grabs the attribute during the authentication process.
How to check applied group policy on the domain clients
View 1 Replies View RelatedI have configured ASA 5510 With IPsec Remote VPN.With local database users(Users are created in ASA).
Internal network has 4 VLANS. Need solution for below.
There are 25 Users created in ASA. where only 5 tp 6 users wants to grant access to Particualr IP and Subnets and rest of the users can access entire lan.
Is it possible to configure Group policy in ASA for IPsec Remote VPN.
I am interested in knowing how to check on my 2003 Server what usernames are blocked from downloading. Many of the clients seemed to have downloaded Google Talk and also Spotify. I was wondering if I can check -where it is located and how to enforce this policy. (or create it if it isn't in effect correctly)
View 2 Replies View RelatedHow to limit maximum SSL VPN sessions per group-policy on ASA5510?
There are 2 group-policy: in one maximum of 10 connections, in the second - 15 (In total licenses for SSL VPN 25 connections).
I'm running a Windows Server 2008 Enterprise Edition server that is currently the domain controller, and a Windows 7 Ultimate client. I have a 'Test' user for messing around with group policy - anyway, on the client Start Menu it has 'Test User' which leads to some form of libraries folder. Is it possible to restrict the link without removing their name?
View 3 Replies View Relatedinstalling the Cisco NAC agent through the Active Directory Group Policy. (Windows 2008 R2)Currently Cisco NAC CAS servers has been installed, configured and the switches are added. But the ports are not active. Currently users are not passing through the NAC. When the ports are active and the users trying to access the network, the browser will ask the users to install the Cisco NAC Agent.I need t by pass this by installing the Cisco NAC agent through the active directory Group Policy. How to install the Cisco NAC agent (4.9.1) to all the users in the Network (Windows XP / 7 )through Active Directory so that the users will not know that the Cisco NAC agent has been installed in their computers. By this way the users need not install the Cisco NAC agent through the Web browser and will just login their user name and password and get into the network.
View 1 Replies View RelatedWhen you use Group Policy to determine whether a link is fast or slow, fast links may be incorrectly flagged as slow links.
This problem may occur when a network that you are trying to detect a slow link to is configured to control the size and flow of Internet Control Message Protocol (ICMP) packets. For example, if a router allows for only ICMP ping packets that have a size of 1,024 bytes, the slow-link detection feature may flag the connection as a slow link. This is because the router discards ICMP packets that are larger than 1,024 bytes. If the router discards the packet because it exceeds the allowed size, fast links may be reported as slow links.
According to Microsoft, the default ICMP ping packet size of 2048 is used.Microsoft recommends changing every single Windows machine's ICMP size...but my customer would rather just change the router. It is a 2821 router, running 12.4(24)T4, using MLPPP to bundle two T1s.
how to associate an AD group - which i have defined in users and identity stores/external identity stores/Active Directory/Directory attributes to associate with the relevant identity groups - Users and identity stores/identity groups Is there an example of this being done somewhere as i am having problems understanding how to do this from the user guide.All i want to do is associate identity groups with ad groups.
View 3 Replies View RelatedI have been using aes 256 with dh group 2 and pfs group 2 for my site to site vpn tunnels.Now I am considering modifying the dh groups both for p1 and pfs to group 5 or keep it group 2.Is this a must to have dh group 5 with aes 256 or having dh group 2 with aes 256 is also common ?
View 1 Replies View Relatedwe're evaulating the Cisco SM 4.2. After adding my ASA 5520 the Policies are discovered from the device except the RA VPN Policies.I tried to trigger the discovery process manually and i got this errormessage Please verify the device "IP address", "hostname", "domain name" and "port number" are correct, there is network connectivity between the CS Manager server and the device, and the device is configured to accept https connections, the device is running, and then retry this operation.which i don't understand because the other policies were retrieved just fine.
View 0 Replies View RelatedI have the following policy maps in on my 6509:
policy-map Customer
class QoS-voice
shape average 2000000
class class-default
fair-queue
When I apply it to an interface (int vlan1005)- I get:
Router (config-if)#service-policy output Customer
shape average command is not supported for this interface
Configuration failed!
This also happens with priority, bandwidth, etc. How can I configure QoS on this 6509 then?
sample config for ASA 8.4 L2L VPN using Policy NAT?We could have multiple VPN tunnels terminated on the central ASA and our customer's LAN subnets could be interfering.Basically I need to build something like this [URL]but the problem is that I have ASAs running 8.4
View 2 Replies View Relatedi want to establish a video conferencing system based using desktop computers so that at a time about 7-8 users are in a video conference simultaneosly. i have the media connectivity already established i.e on OFC. will i have to make a server.
View 5 Replies View RelatedWe have two 4404's and WCS. The 4404's are almost maxed out. We have an addition 4404 which we would like to add to the group of 4404's
View 1 Replies View RelatedI tried to configure policy-map under Cisco Catalyst WS-C3560V2-24TS(c3560-ipservicesk9-mz.122-50.SE5.bin).
View 4 Replies View RelatedI am Using Windows 7 32-Bit, and my Network usually works fine, and my internet has been working fine up until recently. However about a month (maybe more) I noticed a problem that kept cutting me off occasionally and said Diagnostic Policy was not started, I troubleshooted it and it was fine. Much more recently this has been happening more frequently and troubleshooting it doesn't solve the problem. I can get online for 10-15 Mins then I am cut off again. Restarting the computer often fixes it but not always. I went to Services and found the Diagnostic Policy Service is not running, I press start and receive this error message.
The Diagnostic Policy Service service on local computer started and then stopped. Some services stop automatically if they are not in use by services or programs.I am quite sure my loss of Internet is due to this as this is a network related service and what the troubleshooter always finds to be the problem. Other Computer/Devices in the house connect to the internet fine with no loss of connection so it has nothing to do with that. I have tried various fixes like uninstalling network adapter drivers, and checking permissions in Registry but it has not worked.
I have ipsec policy that I need to activate/deactivate using batch! So is there a way to activate policy using netsh?
View 1 Replies View RelatedI have a new DIR-655 and have successfully added three access policies. I am trying to add a fourth, and have gone through the wizard making all the necessary entries. After saving, I get back to the list of existing policies, but the one I just added does not appear.
View 2 Replies View RelatedI set up a full mesh LAN-to-LAN VPN for a client with 4 sites. Each site has an ASA 5505 running 8.2(5). Site-to-site VoIP traffic runs in the VPN tunnels, as well as traffic to/from a file-server located at the main site. There are two back-up servers, one at the main site and one at a remote site. The main site has 2 bonded T1s and the other three sites have a single T1. How should I go about setting up my QoS?
My top requirement is that VoIP traffic will never be pushed out of the way for data traffic. My secondary consideration is to give more preference to file-server traffic than to web traffic and to make back-up traffic the least important. I'm currently researching to see if the VoIP provider is DSCP marking EF on the VoIP traffic, but I am going to assume they are for now. I know the IP of the file-server and back-up servers.
i am doind a policy NAT on the folowing scenarion.
acess-list policy_nat extended permit ip host 10.0.0.1 host 192.168.1.1
static (inside,outempresa) 170.66.53.1 access-list policy_nat
I understand that when host A 10.0.0.1 wants to connect to host B192.168.1.1 its going to be translated to 170.66.53.1 when host 192.168.1.1 wants to connect to10.0.0.1 the same entry will change the destination when the packet hits the asa from 170.66.53.1 to 10.0.0.1, is that correct ?
Why my 857 adv security don't have class-map and policy map command ? now i wanna use traffic shaping on this but when i use command class-map it doesn't have. [code]
View 3 Replies View RelatedHow can I configure police-based nat to allow ICMP-only traffic on asaos 8.4.1 or 8.3?On 8.3 it was very simple:global (outside) 1 interface ,access-list outside_nat_outbound extended permit icmp any any,nat (outside) 1 access-list outside_nat_outbound.
View 10 Replies View RelatedI have a L2L tunnel I need to convert from 8.2 to 8.6 and need to understand the static policy Nat conversion. I have single hosts that require a 1-1 nat to addresses given to be my the vendor that reside on my firewall. Other works i have /24s that I static nat my inside host to so that the vendor can access the host for support.Example. server 10.11.103.44(real server on my inside network)
5.5.98.0/24-Defined for local traffic via L2Ltunnel
object-group network Carebridge_Local
description Mckesson Local network list
network-object 5.5.98.0 255.255.255.0
[code]......
How would I accomplish the same in Ver. 8.6
How to migrate a following VPN (site-to-site) config from ASA 8.2 to ASA v8.3,ASA 8.2
View 4 Replies View RelatedI have a weird issue with a QOS policy that I have implemented. Details are below.
This is basically the policy I have created. It is running on a Cisco 877 router (running Advance IP Services 12.4). The internet connection is an Internode ADSL service.
class-map match-any VOIP
match access-group name VOICE-OUT
!
!
[Code]....
I want to setup a vpn tunnel from a Cisco VPN Client in the internet over a fritzbox to the Cisco 876 (Version 15.1(4)M3) so that the vpn tunnel terminates at the Cisco 876.For that reason I used the command "crypto map mymap" on the int fastethernet 1. When I try to connect, the VPN Client opens the window for username and password but then ends with the message "not connected". When I do "debug crypto isakmp" the Cisco 876 shows the message: "phase 2 SA policy not acceptable!". [code]
View 3 Replies View Related