Cisco VPN :: Policy NAT Configuration In ASA 8.3 Version
Jun 24, 2012How to migrate a following VPN (site-to-site) config from ASA 8.2 to ASA v8.3,ASA 8.2
View 4 Replies
ADVERTISEMENT
Cisco VPN :: ASA 8.4 L2L VPN With Policy-NAT Configuration?
Aug 30, 2011sample config for ASA 8.4 L2L VPN using Policy NAT?We could have multiple VPN tunnels terminated on the central ASA and our customer's LAN subnets could be interfering.Basically I need to build something like this [URL]but the problem is that I have ASAs running 8.4
View 2 Replies View RelatedCisco WAN :: 1841 - Policy Configuration
Dec 15, 2010I have the following very simple policy configured on a Cisco 1841.
policy-map Shape-2Mb class class-default shape average 2000000 interface FastEthernet0/1[code]....
I'd just like some clarification on the best ways to monitor this. Looking at the 'sh policy-map int fa0/1' i get this:
FastEthernet0/1 Service-policy output: Shape-2Mb Class-map: class-default (match-any) [code]...
some of the sections don't make much sense to me. What is the output of that command.
Cisco WAN :: 7609 - Configuration Failed On Policy Map
Aug 3, 2011Im having this error on the 7609, but for other policy its working.
Code...
Cisco WAN :: 6506 Configuration Of Policy Based Routing
Jul 18, 2011I need to configure Policy Based Routing. There are two WAN Links from two Different ISP : Campus NW has one CORE switch - Cisco Catalyst 6506. [code]
View 3 Replies View RelatedCisco WAN :: 6500 - Copp Configuration / Error Failed To Install Policy
Dec 12, 2012I was trying to configure copp on one of 6500 sup-2T. Is it ok to add customized policies to the default copp "policy-default-autocopp".When I created my own customized policy using policy-map, I get following error
control-plane service-policy input policy-custom
error: failed to install policy map policy-custom
Cisco :: NAT Configuration In Later Version Of The ASA OS
Mar 27, 2011Just trying to find my way through the new NAT configuration in later version of the ASA OS but having a few issues.
View 7 Replies View RelatedCisco WAN :: SSH Configuration In IOS Version 15.0(1) M2?
Jan 23, 2011I configured the below in IOS ver 12.4(5a) is working fine (able login using Putty) , but the same configuration is not working in IOS ver 15.0(1)M2 (Not able to login using Putty)
hostname hostnameip domain-name domainnamecrypto key generate rsa
ip ssh time-out 120
ip ssh authentication-retries 2
Cisco VPN :: ASA Version 8.2(2) - AnyConnect Configuration
Jul 26, 2012configuring Cisco AnyConnect VPN? For some reason with the config below, I seem to get connected but then my internet connection randomly drops and reconnects. Ive tried several different times to get this to work properly but Im obivously missing something here.
ASA Version 8.2(2)
!
hostname FW01
enable password .MlTybcgwEXNF1HM encrypted
passwd .MlTybcgwEXNF1HM encrypted
names
dns-guard
Cisco Firewall :: NAT Configuration On PIX 506 Version 6.3(1)?
Jun 23, 2011I try to setting up a PIX firewall to server as firewall end point for a small network for Internet access. I had include PIX configuration setup, I had replaced IP address information by sentence which describe them since IP Address is sensitive information in our network.
For some reason NAT process doesn't work in log I always receiving this kind of messages :
106011: Deny inbound (No xlate) tcp src inside:INTERNAL_HOST_IP/2490 dst inside:HOST_PUBLIC_INTERNET_IP/80
106011: Deny inbound (No xlate) tcp src inside:INTERNAL_HOST_IP/2490 dst inside:HOST_PUBLIC_INTERNET_IP/80
106011: Deny inbound (No xlate) tcp src inside:INTERNAL_HOST_IP/2491 dst inside:HOST_PUBLIC_INTERNET_IP/80PIX Configuration
[code]...
Cisco WAN :: Clear Configuration In IOS-XR Version 3.9 ASR 9010
Mar 17, 2011What is the procedure to delete the full startup-configuration of Cisco ASR 9010 with IOS-XR version 3.9.Tried the following but unable to do it:erase nvram, Commit Replce.
View 2 Replies View RelatedCisco Firewall :: NAT Configuration In ASA 5510 IOS Version 8.3
Mar 8, 2011Will give configuration of NAT for my internal users with 192.168.1.0/24 with single public IP.
I new to configure IOS version 8.3.
Cisco AAA/Identity/Nac :: Configuration Between ACS 4.2 And ISE Latest Version
Jan 26, 2013We are a Small company with 400-Users and currently we are using ACS 4.2 at our company.we want to upgrade and use Cisco ISE Appliance instead.
I want to know is there any major changes in configuration between ACS 4.2 and the ISE Latest Verizon.?
Is there any Hardware (Switch or Cisco AP ) compatibility issues with using Cisco ISE. (we are currently using Cisco Cat 3550 and Cisco Aironet 2600 APs with the existing ACS4.2) What ISE Series & what Soft version are the latest so i can order ?
Cisco :: LMS 4.2.1 - Backup Configuration Of WS-C4503-E Version Cat4500e
Oct 11, 2012I have a Cisco LMS 4.2.1 on a Windows 2008 Server R2 platform and I would like to backup the configuration of my WS-C4503-E version cat4500e-universalk9.SPA.03.03.01.SG.151-1.SG1I create the job in Configuration > Configuration Archive > Synchronization and after the execution of the job, I check th status in Admin > Job > Browser: I don't know why the archive doesn't exist. It's a newly install.
View 2 Replies View RelatedCisco VPN :: Configuration IPSec Client At ASA 5505 Version 8.4
Feb 8, 2012I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4. Any link or some material to config ipsec vpn client at asa 5505 version 8.4.
View 1 Replies View RelatedCisco VPN :: Remote Access VPN Configuration On ASA 5550 Version 8.2
Oct 29, 2012I have a problem relating to remote access VPN configuration on Cisco ASA 5550 verion 8.2(1). I used Cisco VPN client 5.0.03.0560 with a simple topology : laptop(client) -----( Internet) ------- (IP public) ASA. Now, I can ping from laptop to OUTSIDE Interface on ASA from Internet when I connect from Cisco VPN client to ASA , I was notified log on Cisco VPN client as below: [code]
View 1 Replies View RelatedCisco Firewall :: Restore Configuration To New ASA5505 On Different ASDM Version
May 27, 2013so we have been using our current ASA5505 for a long time. Since it only support up to 10 VPN licenses, so we buy a new ASA5505-SEC-BUN-K9(support up to 25 users).
the old ASA are running: 8.0.3 and ASDM 6.0.3
the new ASA are running: 8.2.5 and ASDM 6.4.5
I thought it would be simple as export and import the config file, but when i tried to restore, the new one is looking for a zip file but the old one doesn;t backup file in ZIP. It looks like i need to update the ASA version or/and ASDM?
I am pretty new to this and never upgrade any of these versions since I am aware of the upgrade may mess things up. So do I need to upgrade both the ASA version and the ASDM in order to restore my config? any effect if i do the upgrade? I also read some articles, we need to upgrade on the version one by one, like 8.0 to 8.1 then 8.2?
Cisco Firewall :: Possible To Convert Pix 501 Configuration Running Version 6.3(5) To New ASA5505
Jan 9, 2012I am wondering if it's possible to convert a Pix 501 configuration running version 6.3(5) to a new ASA5505 which we just purchased? We have site to site VPN on this device and i am just trying to save some time. I believe Cisco TAC might have a tool to do this but i am not sure.
View 4 Replies View RelatedCisco AAA/Identity/Nac :: ACS1113 Version 4.2 Ssh Version 1 / Specify Only Version 2 Or Turn Off SSH?
Sep 14, 2009McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
View 9 Replies View RelatedCisco Firewall :: 1811 / Zone-Based Policy Firewall Configuration
May 16, 2011I have two 1811's connected in a lab using a ipsec vpn tunnel (using a switch to simulate an internet connection between them).I am trying to configure one of the routers as a ZBPF just to allow a remote windows login (DC on the firewalled side, workstations on the other side).I'm trying to verify that the zbpf is working, but it doesn't seem to stop anything. I had match icmp added to the class-map, but took it out to test if icmp would fail. It didn't. Basically, I don't think the firewall is working at all. Any thoughts on how I can configure this so that the policies will work between zone-pairs?
Here's an quick drawing:
Here are the configurations:
Local router:
hostname sdc-1811-LocalLab
!
boot-start-marker
boot-end-marker
!
no aaa new-model
!
resource policy
[code]....
Cisco Security :: ACS 4.1 Version Recovery Disc On 4.2 Version To Recover Forgotten Password
Jan 16, 2012Can we use ACS 4.1 version recovery disc on 4.2 verison to recover the forgotten password.
View 1 Replies View RelatedCisco Wireless :: Which Version Of Prime Infrastructure Supports WLC5508 Version 7.4
Mar 11, 2013which version of prime infrastructure supports wlc5508 version 7.4
View 2 Replies View RelatedCisco Firewall :: Software Upgrade For ASA 5520 Version 7.0(1) To Version 8.4?
Apr 3, 2012provide me with the important links which can show me how to do the software upgrade for my ASA 5520 ver 7.0(1) to ver 8.4 ? as well as the ASDM
View 10 Replies View RelatedCisco Firewall :: How To Upgrade ASA 5510 Version 8.0(4) To Version 8.3
May 10, 2011i am using Cisco ASA 5510 with ASA Version 8.0(4) and memory 256MB. me to Upgrade it to 8.3
View 6 Replies View RelatedCisco :: Upgrading WCS Version 7.0.172.0 To WLC Version 7.0.230.0?
Mar 13, 2012We are looking to upgrade our WiSMs to version 7.0.230.0, but the Cisco compatibility matrix suggests we need to upgrade WCS to the same version (it is currently on 7.0.172.0). My question is can we upgrade the WiSMs and do the WCS at a later date with no issues or do we need to do them at the same time to keep visibility of everything?
The reason I ask is that some of my clients use lobby ambassador for some of their users and they will need wireless access on the day we are due to upgrade WCS (the WiSMs are due to be upgraded and rebooted earlier that morning.
Cisco :: CSM 4.2 RA VPN Policy Discovery?
Nov 29, 2011we're evaulating the Cisco SM 4.2. After adding my ASA 5520 the Policies are discovered from the device except the RA VPN Policies.I tried to trigger the discovery process manually and i got this errormessage Please verify the device "IP address", "hostname", "domain name" and "port number" are correct, there is network connectivity between the CS Manager server and the device, and the device is configured to accept https connections, the device is running, and then retry this operation.which i don't understand because the other policies were retrieved just fine.
View 0 Replies View RelatedCisco WAN :: 6509 - Policy Map QoS
Dec 19, 2010I have the following policy maps in on my 6509:
policy-map Customer
class QoS-voice
shape average 2000000
class class-default
fair-queue
When I apply it to an interface (int vlan1005)- I get:
Router (config-if)#service-policy output Customer
shape average command is not supported for this interface
Configuration failed!
This also happens with priority, bandwidth, etc. How can I configure QoS on this 6509 then?
Cisco Switching/Routing :: 6509 Convert CatOS Configuration To Native IOS Configuration
Jul 17, 2012I am position to migrate from CatOS 6509 switch to native IOS 6509 switch. long time ago, there was some site to convert automatically based on copy and paste onto the tool, but i can not find.
Does anybody know how to convert CatOS configuration to Native IOS configuration ? It is not IOS change, but it is configuration convert.
Cisco :: Policy-map Under WS-C3560V2-24TS?
Apr 5, 2012I tried to configure policy-map under Cisco Catalyst WS-C3560V2-24TS(c3560-ipservicesk9-mz.122-50.SE5.bin).
View 4 Replies View RelatedCisco VPN :: ASA5505 QoS Policy On VPN Tunnels
Dec 14, 2011I set up a full mesh LAN-to-LAN VPN for a client with 4 sites. Each site has an ASA 5505 running 8.2(5). Site-to-site VoIP traffic runs in the VPN tunnels, as well as traffic to/from a file-server located at the main site. There are two back-up servers, one at the main site and one at a remote site. The main site has 2 bonded T1s and the other three sites have a single T1. How should I go about setting up my QoS?
My top requirement is that VoIP traffic will never be pushed out of the way for data traffic. My secondary consideration is to give more preference to file-server traffic than to web traffic and to make back-up traffic the least important. I'm currently researching to see if the VoIP provider is DSCP marking EF on the VoIP traffic, but I am going to assume they are for now. I know the IP of the file-server and back-up servers.
Cisco Firewall :: Using Static Policy NAT On ASA 8.2?
Jul 6, 2011i am doind a policy NAT on the folowing scenarion.
acess-list policy_nat extended permit ip host 10.0.0.1 host 192.168.1.1
static (inside,outempresa) 170.66.53.1 access-list policy_nat
I understand that when host A 10.0.0.1 wants to connect to host B192.168.1.1 its going to be translated to 170.66.53.1 when host 192.168.1.1 wants to connect to10.0.0.1 the same entry will change the destination when the packet hits the asa from 170.66.53.1 to 10.0.0.1, is that correct ?
Cisco WAN :: Why 857 Adv Security Don't Have Class And Policy Map
Feb 1, 2012Why my 857 adv security don't have class-map and policy map command ? now i wanna use traffic shaping on this but when i use command class-map it doesn't have. [code]
View 3 Replies View RelatedCisco Firewall :: Policy Based NAT On ASA 8.4.1
Feb 27, 2011How can I configure police-based nat to allow ICMP-only traffic on asaos 8.4.1 or 8.3?On 8.3 it was very simple:global (outside) 1 interface ,access-list outside_nat_outbound extended permit icmp any any,nat (outside) 1 access-list outside_nat_outbound.
View 10 Replies View Related