Cisco Firewall :: NAT Configuration On PIX 506 Version 6.3(1)?
Jun 23, 2011
I try to setting up a PIX firewall to server as firewall end point for a small network for Internet access. I had include PIX configuration setup, I had replaced IP address information by sentence which describe them since IP Address is sensitive information in our network.
For some reason NAT process doesn't work in log I always receiving this kind of messages :
106011: Deny inbound (No xlate) tcp src inside:INTERNAL_HOST_IP/2490 dst inside:HOST_PUBLIC_INTERNET_IP/80
106011: Deny inbound (No xlate) tcp src inside:INTERNAL_HOST_IP/2490 dst inside:HOST_PUBLIC_INTERNET_IP/80
106011: Deny inbound (No xlate) tcp src inside:INTERNAL_HOST_IP/2491 dst inside:HOST_PUBLIC_INTERNET_IP/80PIX Configuration
[code]...
View 1 Replies
ADVERTISEMENT
Mar 8, 2011
Will give configuration of NAT for my internal users with 192.168.1.0/24 with single public IP.
I new to configure IOS version 8.3.
View 5 Replies
View Related
May 27, 2013
so we have been using our current ASA5505 for a long time. Since it only support up to 10 VPN licenses, so we buy a new ASA5505-SEC-BUN-K9(support up to 25 users).
the old ASA are running: 8.0.3 and ASDM 6.0.3
the new ASA are running: 8.2.5 and ASDM 6.4.5
I thought it would be simple as export and import the config file, but when i tried to restore, the new one is looking for a zip file but the old one doesn;t backup file in ZIP. It looks like i need to update the ASA version or/and ASDM?
I am pretty new to this and never upgrade any of these versions since I am aware of the upgrade may mess things up. So do I need to upgrade both the ASA version and the ASDM in order to restore my config? any effect if i do the upgrade? I also read some articles, we need to upgrade on the version one by one, like 8.0 to 8.1 then 8.2?
View 4 Replies
View Related
Jan 9, 2012
I am wondering if it's possible to convert a Pix 501 configuration running version 6.3(5) to a new ASA5505 which we just purchased? We have site to site VPN on this device and i am just trying to save some time. I believe Cisco TAC might have a tool to do this but i am not sure.
View 4 Replies
View Related
Apr 3, 2012
provide me with the important links which can show me how to do the software upgrade for my ASA 5520 ver 7.0(1) to ver 8.4 ? as well as the ASDM
View 10 Replies
View Related
May 10, 2011
i am using Cisco ASA 5510 with ASA Version 8.0(4) and memory 256MB. me to Upgrade it to 8.3
View 6 Replies
View Related
Mar 27, 2011
Just trying to find my way through the new NAT configuration in later version of the ASA OS but having a few issues.
View 7 Replies
View Related
Jan 23, 2011
I configured the below in IOS ver 12.4(5a) is working fine (able login using Putty) , but the same configuration is not working in IOS ver 15.0(1)M2 (Not able to login using Putty)
hostname hostnameip domain-name domainnamecrypto key generate rsa
ip ssh time-out 120
ip ssh authentication-retries 2
View 6 Replies
View Related
Jun 24, 2012
How to migrate a following VPN (site-to-site) config from ASA 8.2 to ASA v8.3,ASA 8.2
View 4 Replies
View Related
Jul 26, 2012
configuring Cisco AnyConnect VPN? For some reason with the config below, I seem to get connected but then my internet connection randomly drops and reconnects. Ive tried several different times to get this to work properly but Im obivously missing something here.
ASA Version 8.2(2)
!
hostname FW01
enable password .MlTybcgwEXNF1HM encrypted
passwd .MlTybcgwEXNF1HM encrypted
names
dns-guard
View 25 Replies
View Related
Mar 17, 2011
What is the procedure to delete the full startup-configuration of Cisco ASR 9010 with IOS-XR version 3.9.Tried the following but unable to do it:erase nvram, Commit Replce.
View 2 Replies
View Related
Jan 26, 2013
We are a Small company with 400-Users and currently we are using ACS 4.2 at our company.we want to upgrade and use Cisco ISE Appliance instead.
I want to know is there any major changes in configuration between ACS 4.2 and the ISE Latest Verizon.?
Is there any Hardware (Switch or Cisco AP ) compatibility issues with using Cisco ISE. (we are currently using Cisco Cat 3550 and Cisco Aironet 2600 APs with the existing ACS4.2) What ISE Series & what Soft version are the latest so i can order ?
View 2 Replies
View Related
Oct 11, 2012
I have a Cisco LMS 4.2.1 on a Windows 2008 Server R2 platform and I would like to backup the configuration of my WS-C4503-E version cat4500e-universalk9.SPA.03.03.01.SG.151-1.SG1I create the job in Configuration > Configuration Archive > Synchronization and after the execution of the job, I check th status in Admin > Job > Browser: I don't know why the archive doesn't exist. It's a newly install.
View 2 Replies
View Related
Feb 8, 2012
I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4. Any link or some material to config ipsec vpn client at asa 5505 version 8.4.
View 1 Replies
View Related
Oct 29, 2012
I have a problem relating to remote access VPN configuration on Cisco ASA 5550 verion 8.2(1). I used Cisco VPN client 5.0.03.0560 with a simple topology : laptop(client) -----( Internet) ------- (IP public) ASA. Now, I can ping from laptop to OUTSIDE Interface on ASA from Internet when I connect from Cisco VPN client to ASA , I was notified log on Cisco VPN client as below: [code]
View 1 Replies
View Related
Sep 14, 2009
McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
View 9 Replies
View Related
Mar 5, 2013
I am currently migrating a netscreen firewall to a asa 5515 version 8.6 The issue is setting up the management connectivity.
basically the management IP of the cisco asa is not advertised. But, we want to route a management IP through the management interface to interface Gi0/2.
so IP of management interface is say - 216.10.100.10. and the IP of the inside interface is say - 198.1.1.10/24 on our router we have a static route sending 198.1.1.0/24 to next hop of 216.10.100.10 (management interface of cisco asa).
On the Cisco ASA can I send the traffic to the inside interface and manage the firewall via ssh that way?
View 4 Replies
View Related
May 14, 2012
I'm trying to install an ASA 5510 transparent firewall using ASA version 8.4(3)9 but I don't understand how traffic will ever pass through my firewall if both interfaces are on the same sub net(V lan) as the host and it's default gateway? The reason I'm doing this is were installing UAG (or Direct Access) and the UAG appliance need to have public IP's but still be behind a firewall (see attached diagram).
Looking at the documentation (which all seems to be for 5505's running 8.2) it almost seems like i need to have the transparent firewall 'in-line' to the ISP router?, but this router services another IP address range on another v lan for other (routed) firewalls (not shown on diagram) so putting it 'in-line' is not possible. Surely this can't be the case can it? If not how is it supposed to be cabled up and configured so packets go through the firewall?
View 3 Replies
View Related
Mar 15, 2012
How are asa5540 in high availability mode upgraded for their versions.
View 1 Replies
View Related
Dec 26, 2012
configuring NAT on intranet firewall. here is the my topology:
DMZ Network - - - - - - - - - External Firewall - - - - - - - - - Internet
|
|
|
Internal Network - - - - - - - - - Internal Firewall
1) I can Ping the intneral host from external firewall, internet firewall and DMZ network
2) Both ASA's are running OS Version 9.0(1)
3) ACL used permit IP any any, on both (i.e inside and outside)
NAT configuration on Internal Firewall (Identity NAT)
object network MGMT-SRV-INSIDE subnet 10.10.10.0 255.255.255.192
object network MGMT-SRV-identity
subnet10.10.10.0 255.255.255.192
object network MGMT-SRV-INSIDE nat (Inside,Outside) static MGMT-SRV-identity
[code]....
View 1 Replies
View Related
Oct 11, 2011
I would like to know how can I block a ip address from the CLI at the Cisco PIX Firewall Version 6.3(4)
View 4 Replies
View Related
Jan 12, 2013
I would like to know whether CSM 4.3 is compatible with ASA version 9.1(1). Any appropriate url that contains information about these two version's compatibility?
View 2 Replies
View Related
Jun 17, 2012
I try to convert a CISCO ASA 8.2 version to 8.4 BUT, I have a small or "little" problem :On Cisco ASA 8.2.x, i have a possibility to create multi-line global with different subnet.Example :
global (outside) 2 217.1.x.65-217.x.x.66 netmask 255.255.255.240
global (outside) 1 interface <-- Ip interface is other subnet : 217.3.x.3
global (outside) 2 217.1.x.67 netmask 255.255.255.240
nat (inside) 1 0.0.0.0 0.0.0.0
nat (dmz2) 2 192.168.4.0 255.255.255.0
What is the method or solution to translate multi-global in 8.4 ? with static translation in 8.4 : i try to use different server in inside's zone, but not in same network on outside. In 8.2 Firmware, it's very easy to use that, but in 8.3-8.4 version, i don't have some idea to manipulate ...
interface Vlan1
description Lien vers reseau Interne Client
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
[code]....
View 16 Replies
View Related
Apr 8, 2012
We want to make an upgrade of one of our customers' ASA 5520 (with failover). They have version 8.2 now and we want to get the more stable newest one. Can we get an 8.6 version? or we need an ASA 5500X for that one?
View 2 Replies
View Related
Sep 12, 2012
%ASA-3-305005: No translation group found for tcp src inside:211.155.169.186/1433 dst outside:42.121.87.89/6000, I found this error ,but the IP 211.155.169.186 is public address. I check the configuration but didn't find any information about this address.I don't understand why src is inside? How can I solve this error?
View 1 Replies
View Related
Apr 19, 2011
We have 2 firewalls on PIX facing the Internet and connected to interface e1 (behind it) an ASA version 8.3 Both the PIX (Firewall facing) and the ASA are on the same subnet.
By using Routing statements and statics I have been able to reroute specific traffic to the ASA5520 version 8.3 Now I need to inverse the 2 devices. The ASA5520 will be facing the Internet and the PIX will be behind it.Unfortunately the ASA5520 is refusing to route the traffic to the PIX. The access-lists are open accordingly and a NAT on the ASA has been created.
View 2 Replies
View Related
May 29, 2013
what the new command is for NAT in version 8.3?The config i have is from Version 7.2 and doesnt work on 8.3. [code]
View 12 Replies
View Related
Dec 20, 2011
how to configure ip sla monitoring on asa ver 7.0 (6) ?
View 4 Replies
View Related
Mar 14, 2011
I need to fullfill the below configuration which is working fine on my actual D-Link Netdefend firewall.
We have a range of IP assign by our ISP : 194.250.47.128/29
194.250.47.129 is the firewall IP and 134 the isp gateway.
We have 4 interfaces
- The local user interface: lan =192.168.170.1/24
- The servers interface : dmz =192.168.171.1/24
- The database interface : oracle=192.168.169.1/24
[Code]...
View 7 Replies
View Related
Jun 12, 2012
I have PIX515 with version 7.0 installed, so can i install version 8.3 on it?and what will be the memory requirements?
View 2 Replies
View Related
Apr 2, 2013
I have to test new Cisco ASA's IOS version 8.4 in my GNS3 LAB . do provide the link for downloading the same.I dont have direct download access from cisco.com.
View 1 Replies
View Related
Sep 23, 2012
What anyconnect version do I need on a 5505 so i can have people connect via iOS devices? Right now I have "anyconnect-macosx-i386-2.5.1025-k9.pkg" on there, will that work for iOS devices?
View 7 Replies
View Related
Nov 19, 2012
I have a PIX506E that was resently reset and it has version PIX Version 7.1(2) . It either uses some different commands or I am not using them correctly. [code]
View 2 Replies
View Related
