Cisco :: Upgrading WCS Version 7.0.172.0 To WLC Version 7.0.230.0?
Mar 13, 2012
We are looking to upgrade our WiSMs to version 7.0.230.0, but the Cisco compatibility matrix suggests we need to upgrade WCS to the same version (it is currently on 7.0.172.0). My question is can we upgrade the WiSMs and do the WCS at a later date with no issues or do we need to do them at the same time to keep visibility of everything?
The reason I ask is that some of my clients use lobby ambassador for some of their users and they will need wireless access on the day we are due to upgrade WCS (the WiSMs are due to be upgraded and rebooted earlier that morning.
McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
Whatdoes it require?. What is the current version? What do we need for upgrading? Are there specific codes or new need to buy new products? In case of buying new products, which are the configurations?
I purchased several Cisco 2811 with Advanced IP Services - they are version 12.2.X
The product number looked like this CISCO2811-HSEC/K9 2811 Bundle w/AIM-VPN/SSL-2,Adv IP Serv,10 SSL lic,128F/512D
I need to upgrade the IOS to version 15.1 - Do I require a license ? What happens if I install it without a License ? Am I entitled to a free license as I am not changing the software type (ADV IP Serv) ?
I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220.When it was unstable, I found three strange condition 1. A lot of log looks like this*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/1059/stat.(erno 24)*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'fmcHsTask'2. Internal Temperature was showed "sensor failed"3. CPU User load is Zero?
I'm not sure how to tell if I'm running ssh version 1 or ssh version 2, or both.I thought a show run would show a line like, "ip ssh version 2" or "no ip ssh version 1", but I don't see these anywhere.
issue with their ASA version 8.4.2 code? I loaded this code on my beta ASA last week and have seen it "hang" twice since the upgrade. The previous versions of 8.3 and 8.4 code on this same ASA did not have this issue.
I configured the below in IOS ver 12.4(5a) is working fine (able login using Putty) , but the same configuration is not working in IOS ver 15.0(1)M2 (Not able to login using Putty)
hostname hostnameip domain-name domainnamecrypto key generate rsa ip ssh time-out 120 ip ssh authentication-retries 2
I am trying to SSH into my controller after upgrading to 7.0.103 and I get the username prompt but it seems to be disconnecting as soon as I do. Is there something different about this version of code as opposed to the older ones?
WCS fails to start with a Tomcat error , see below ;See launchout below - without re-installing WCS
Checking for Port 21 availability... OK Checking for Port 8456 availability... OK Checking for Port 8457 availability... OK Checking for Port 1299 availability... OK
setting up VPN on my CISCO 851 W-G-A-K9 version 12.3 ?I read on the cisco site that it supports VPN and L2TP and PPTP Tunnels?I did a show VPDN and itt shows no tunnels setup?I use a hyper terminal connection and make all my changes via command line?
I run a windows 2003 server environment with active directory that I have some remote users that I would like to logon to the network?I also have a laptop that I would like to take on the road and be able to logon via vpn?what commands would I need to set this up
I can do simple command like
enable conf t ip nat inside source static tcp xxx.xxx.xxx.xxx 25 interface FastEthernet4 25 exit wr mem enable
I have a couple of Cisco WS-C3750G-12S-E, I`m putting to use again. These will be doing routing (IPv4 and IPv6), VLANs, VRF etc etc.
In Cisco Feature Navigator I find that the newest IOS for this model is 15.0(1)SE and 12.2(58)SE. But my supplier says c3750-ipserviceslmk9-tar.122-55.SE3.tar is the latest. What is the most feature rich, best, stable image I can load on this unit.
We are trying to make a VPN failover over two ASA's. However the 2 ASA's have different version and our smartnet have already expired. I was wondering if this VPN failover would work even if they are different? Or should I get a smartnet first to be able to download an updated ios?
My problem is that when i try to use device manager it tells me mmc cannot run a version of internet explorer earlier than 5.5 and i have internet explorer 7. One thing is that we dont use interent explorer any more we use american online but we still have internet explorer. We got rid of it when we stopped wanting to pay for it. And if i try to hook up the modem for this the dsl light keeps flashing red and everything else is green i dont know why it is red i set up everything. i used the splitter and powered the modem and put the ethernet cord into the back of my xbox and then used the spiltter for the phone line thing and connected the phone line to the back of the computer to the phone thing on the splitter and then used the dsl cord to the back of the modem and on to the splitter.
Is there a way that I can specify which version of the 802.11 standards I can use.e.g. I have an 802.11 B/G/N wireless card and I want to test each on a directional antenna to see how they perform
I thing that i find some bug in the newest IOS 15.1.4M.
The case is falow:
I start to configure failover for the costomer - make default route, make the default path but i cant find the comand IP SLA monitor. Is some meet this problem with this IOS or just Cisco make some chenge in the CLI commands?
I have a routing problem here with routing in PIX515E version 6.35. I have some Client PCs located in the DMZ interface of the PIX515E, they connect to PIX using Cisco VPN Client (IPSEC VPN), after that these PCs can be routed to access Servers (static route) located behind Internal interfaces of PIX. I have some Servers located remotely having Internet Access, the gateway router remotely connect to PIX Outside Interface (Internet) using IPSEC VPN then routed to inside Interface (static route).
I' have realy big layer two access network made of etherogenius Cisco switch with different IOS version and train.My customer bought ISE (ADVANCED AND BASE LICENSE).As far I read on DS it is seem that if you have Minimum IOS release 12.2(52) SE you are able to perform COA, reading DS with more attention I notice that cisco raccomend IOS versione 12.2(55)SE3 why ? does it means COA does not work with 12.2(52)SE,I need a minimum IOS release to perform 802.1x on my wired network ?
I would like to know whether CSM 4.3 is compatible with ASA version 9.1(1). Any appropriate url that contains information about these two version's compatibility?
I try to convert a CISCO ASA 8.2 version to 8.4 BUT, I have a small or "little" problem :On Cisco ASA 8.2.x, i have a possibility to create multi-line global with different subnet.Example :
global (outside) 2 217.1.x.65-217.x.x.66 netmask 255.255.255.240 global (outside) 1 interface <-- Ip interface is other subnet : 217.3.x.3 global (outside) 2 217.1.x.67 netmask 255.255.255.240 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz2) 2 192.168.4.0 255.255.255.0
What is the method or solution to translate multi-global in 8.4 ? with static translation in 8.4 : i try to use different server in inside's zone, but not in same network on outside. In 8.2 Firmware, it's very easy to use that, but in 8.3-8.4 version, i don't have some idea to manipulate ...
interface Vlan1 description Lien vers reseau Interne Client nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0
I have been using ASDM on a "Cisco Adaptive Security Appliance Software Version 8.2(5)" for a long time and in order to route packets among the interfaces without NATting the packets, I have always been using the function "Add NAT Exempt Rule" under "Configuration -> Firewall -> NAT Rules". Everything has always been working fine.
Now I am trying to use ASDM on a "Cisco Adaptive Security Appliance Software Version 9.1(1)" and I cannot find how to do the same operation: the "Add NAT Exempt Rule" option is no longer available and the only way to make the traffic passing through seems to be NATting it on the OUTSIDE interface.
where I am mistaking? My goal is to let the traffic passing through from the inside interface to the outside interface without being translated.
