issue with their ASA version 8.4.2 code? I loaded this code on my beta ASA last week and have seen it "hang" twice since the upgrade. The previous versions of 8.3 and 8.4 code on this same ASA did not have this issue.
View 2 Replies
My computer is says there's no network cable plugged in when i have it plugged in to my smc router but when i plug it into my cable modem i get signal . Ive updated my drivers. my network cable is good i tested it.. all the other computers on the network see the router.
View 4 Replies View Relatedwe've given up on the 4410n. we have two of them, one at the front of our office, one at the back (we have a floor in a highrise in san francisco). the one at the rear of the office - version one hardware, has never had any trouble. it just runs and runs and runs, has been up in the false ceiling for more than a year now. the one at the front of the office started giving us trouble within months of installation. not passing traffic. took it down from the false ceiling and kept it on my desk. staff got in the habit of just power cycling it when the first person showed up in the morning, since it always locked up overnight. RMA'ed it, got a version 2 hardware unit. seemed better initially - but it was faking it. same problems. going unresponsive overnight. gave up.
bought a $40 TrendNet AP. not a single problem in the month it's replaced the 4410N.
better quality hardware at less than 1/4th the price. wow. never buying a cisco WAP again.
McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
View 9 Replies View RelatedI work for a small business of five computers. We have a wireless network for internet traffic, and a wired network for file sharing. The wireless network works great for using the internet, but we are having trouble with the wired network.The issue is being able to communicate with all of the computers on the wired network. The ability to speak with all of the computers on the network is hit or miss. Generally, computer A can speak with computer B, C, and D, but D can only speak with A.
View 4 Replies View RelatedI'm using a XP sp3 machine,dial-up. Was hoping to get connected to open/allowed wifi connection. Did some research, and a ALFA AWUS036h USB adapter looked like the one, good reviews.When I first plugged in and loaded software, it worked great as far as seeing 10-12 connections, and even showed as connected with strong signal on one open/allowed connection, but wasn't connected.Seems like the software doesn't run good, worked at first and I had netstumbler installed and 8-10 stations were showing there also,but after a reboot had no stations on mfg software, none on netstumbler, and never would show stations on XP Zero config., seemes the software got screwy after reboot.
View 1 Replies View RelatedI'm using DIR-655 A5 (A4 in configuration page), with firmware 1.35W. My Internet connection is about 100/100 Mbps, through fiber optic. The problem is that when I'm downloading torrents, sometimes DIR-655 becomes unanswerable, no Internet connection and I can't access the config page. The only way to solve this, is to restart the router.
View 7 Replies View RelatedI hope I'm posting this in the correct place. I have a 2610 router and on starting it up i get this and only this,
"System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by Cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info"
thats all and exactly what is displayed on the console screen the device is none responsive.
I am running XP pro. I have checked thoroughly for viruses/malware/etc. and everything appears to be clean. I have up to date drivers for NIC's, have cleared all temp data, done basically everything that the first tier Time Warner Cable(my ISP) tech support people will tell you to do as they read from that frustrating script we're all too familiar with and have had to deal with time and time before, including resetting modem and router, bypassing router, etc. etc. et bloody cetera.Ran several pings to a variety of servers and noticed ping spikes every 10or so seconds into the 300-600 range from an average of about 20-30ms.
View 5 Replies View RelatedI recently purchases an inspiron 1545 notebook with various upgrades, one including an upgraded wireless card to get faster speeds and signal strength. I have had problems with this laptop ever since i recieved it, i have an old laptop with a worse card which picks up my signal perfectly fine and the speed and signal stays constant. With this inspiron 1545 with a "even better" wireless card i have many problems:,losing signal,poor signal strength and quality,speeds going from decent to slower than dial up,I will be checking this as often as possible.
View 19 Replies View RelatedCan we use ACS 4.1 version recovery disc on 4.2 verison to recover the forgotten password.
View 1 Replies View Relatedwhich version of prime infrastructure supports wlc5508 version 7.4
View 2 Replies View Relatedprovide me with the important links which can show me how to do the software upgrade for my ASA 5520 ver 7.0(1) to ver 8.4 ? as well as the ASDM
View 10 Replies View Relatedi am using Cisco ASA 5510 with ASA Version 8.0(4) and memory 256MB. me to Upgrade it to 8.3
View 6 Replies View RelatedMy problem comes in when trying to add another couple computers to the network, both of these machines are Windows........95!!! These are being kept as they have some programs on that are needed unfortunately! But I cant get these machines to show up in in the "Networked comps section" but can see my win 7, vista, and xp machine.
View 4 Replies View RelatedWe are looking to upgrade our WiSMs to version 7.0.230.0, but the Cisco compatibility matrix suggests we need to upgrade WCS to the same version (it is currently on 7.0.172.0). My question is can we upgrade the WiSMs and do the WCS at a later date with no issues or do we need to do them at the same time to keep visibility of everything?
The reason I ask is that some of my clients use lobby ambassador for some of their users and they will need wireless access on the day we are due to upgrade WCS (the WiSMs are due to be upgraded and rebooted earlier that morning.
Just trying to find my way through the new NAT configuration in later version of the ASA OS but having a few issues.
View 7 Replies View RelatedI'm not sure how to tell if I'm running ssh version 1 or ssh version 2, or both.I thought a show run would show a line like, "ip ssh version 2" or "no ip ssh version 1", but I don't see these anywhere.
View 4 Replies View RelatedI configured the below in IOS ver 12.4(5a) is working fine (able login using Putty) , but the same configuration is not working in IOS ver 15.0(1)M2 (Not able to login using Putty)
hostname hostnameip domain-name domainnamecrypto key generate rsa
ip ssh time-out 120
ip ssh authentication-retries 2
I am trying to SSH into my controller after upgrading to 7.0.103 and I get the username prompt but it seems to be disconnecting as soon as I do. Is there something different about this version of code as opposed to the older ones?
View 1 Replies View RelatedWCS fails to start with a Tomcat error , see below ;See launchout below - without re-installing WCS
Checking for Port 21 availability... OK
Checking for Port 8456 availability... OK
Checking for Port 8457 availability... OK
Checking for Port 1299 availability... OK
[code]....
setting up VPN on my CISCO 851 W-G-A-K9 version 12.3 ?I read on the cisco site that it supports VPN and L2TP and PPTP Tunnels?I did a show VPDN and itt shows no tunnels setup?I use a hyper terminal connection and make all my changes via command line?
I run a windows 2003 server environment with active directory that I have some remote users that I would like to logon to the network?I also have a laptop that I would like to take on the road and be able to logon via vpn?what commands would I need to set this up
I can do simple command like
enable
conf t
ip nat inside source static tcp xxx.xxx.xxx.xxx 25 interface FastEthernet4 25
exit
wr mem
enable
I am running a WLC 4402 with software version 6.0.182.0. Which WCS version should I use or does it matter?
View 5 Replies View RelatedI have a couple of Cisco WS-C3750G-12S-E, I`m putting to use again. These will be doing routing (IPv4 and IPv6), VLANs, VRF etc etc.
In Cisco Feature Navigator I find that the newest IOS for this model is 15.0(1)SE and 12.2(58)SE. But my supplier says c3750-ipserviceslmk9-tar.122-55.SE3.tar is the latest. What is the most feature rich, best, stable image I can load on this unit.
We are trying to make a VPN failover over two ASA's. However the 2 ASA's have different version and our smartnet have already expired. I was wondering if this VPN failover would work even if they are different? Or should I get a smartnet first to be able to download an updated ios?
ASA Version 8.0(3)6
ASA Version 7.0(6)
I thing that i find some bug in the newest IOS 15.1.4M.
The case is falow:
I start to configure failover for the costomer - make default route, make the default path but i cant find the comand IP SLA monitor. Is some meet this problem with this IOS or just Cisco make some chenge in the CLI commands?
Tomorrow i will try with IOS version 15.1.1T.
I am seeing a lot of the following showing up in the WLC trap log:
Decrypt errors occurred for client <CLIENT-MAC> using WPA2 key on 802.11b/g interface of AP 00:17:0f:81:ad:90
we are using WLC runninn 7.0.98 and ACS 4.0
I have a routing problem here with routing in PIX515E version 6.35. I have some Client PCs located in the DMZ interface of the PIX515E, they connect to PIX using Cisco VPN Client (IPSEC VPN), after that these PCs can be routed to access Servers (static route) located behind Internal interfaces of PIX. I have some Servers located remotely having Internet Access, the gateway router remotely connect to PIX Outside Interface (Internet) using IPSEC VPN then routed to inside Interface (static route).
View 9 Replies View RelatedI' have realy big layer two access network made of etherogenius Cisco switch with different IOS version and train.My customer bought ISE (ADVANCED AND BASE LICENSE).As far I read on DS it is seem that if you have Minimum IOS release 12.2(52) SE you are able to perform COA, reading DS with more attention I notice that cisco raccomend IOS versione 12.2(55)SE3 why ? does it means COA does not work with 12.2(52)SE,I need a minimum IOS release to perform 802.1x on my wired network ?
View 1 Replies View RelatedI would like to know whether CSM 4.3 is compatible with ASA version 9.1(1). Any appropriate url that contains information about these two version's compatibility?
View 2 Replies View RelatedI try to convert a CISCO ASA 8.2 version to 8.4 BUT, I have a small or "little" problem :On Cisco ASA 8.2.x, i have a possibility to create multi-line global with different subnet.Example :
global (outside) 2 217.1.x.65-217.x.x.66 netmask 255.255.255.240
global (outside) 1 interface <-- Ip interface is other subnet : 217.3.x.3
global (outside) 2 217.1.x.67 netmask 255.255.255.240
nat (inside) 1 0.0.0.0 0.0.0.0
nat (dmz2) 2 192.168.4.0 255.255.255.0
What is the method or solution to translate multi-global in 8.4 ? with static translation in 8.4 : i try to use different server in inside's zone, but not in same network on outside. In 8.2 Firmware, it's very easy to use that, but in 8.3-8.4 version, i don't have some idea to manipulate ...
interface Vlan1
description Lien vers reseau Interne Client
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
[code]....
I have been using ASDM on a "Cisco Adaptive Security Appliance Software Version 8.2(5)" for a long time and in order to route packets among the interfaces without NATting the packets, I have always been using the function "Add NAT Exempt Rule" under "Configuration -> Firewall -> NAT Rules". Everything has always been working fine.
Now I am trying to use ASDM on a "Cisco Adaptive Security Appliance Software Version 9.1(1)" and I cannot find how to do the same operation: the "Add NAT Exempt Rule" option is no longer available and the only way to make the traffic passing through seems to be NATting it on the OUTSIDE interface.
where I am mistaking? My goal is to let the traffic passing through from the inside interface to the outside interface without being translated.
How to migrate a following VPN (site-to-site) config from ASA 8.2 to ASA v8.3,ASA 8.2
View 4 Replies View Related
