Cisco WAN :: 1841 - Policy Configuration
Dec 15, 2010
I have the following very simple policy configured on a Cisco 1841.
policy-map Shape-2Mb class class-default shape average 2000000 interface FastEthernet0/1[code]....
I'd just like some clarification on the best ways to monitor this. Looking at the 'sh policy-map int fa0/1' i get this:
FastEthernet0/1 Service-policy output: Shape-2Mb Class-map: class-default (match-any) [code]...
some of the sections don't make much sense to me. What is the output of that command.
View 1 Replies
ADVERTISEMENT
Jun 17, 2009
how can I clear the counters of the policy-map statistics in an 7600 and the 1841 router?
View 6 Replies
View Related
Aug 30, 2011
sample config for ASA 8.4 L2L VPN using Policy NAT?We could have multiple VPN tunnels terminated on the central ASA and our customer's LAN subnets could be interfering.Basically I need to build something like this [URL]but the problem is that I have ASAs running 8.4
View 2 Replies
View Related
Jun 24, 2012
How to migrate a following VPN (site-to-site) config from ASA 8.2 to ASA v8.3,ASA 8.2
View 4 Replies
View Related
Aug 3, 2011
Im having this error on the 7609, but for other policy its working.
Code...
View 3 Replies
View Related
Jul 18, 2011
I need to configure Policy Based Routing. There are two WAN Links from two Different ISP : Campus NW has one CORE switch - Cisco Catalyst 6506. [code]
View 3 Replies
View Related
Dec 12, 2012
I was trying to configure copp on one of 6500 sup-2T. Is it ok to add customized policies to the default copp "policy-default-autocopp".When I created my own customized policy using policy-map, I get following error
control-plane service-policy input policy-custom
error: failed to install policy map policy-custom
View 7 Replies
View Related
Sep 4, 2011
I have a little problem configuring NAT on router 1841, like this is the topology:
WAN (PUBLIC´S ADDRESS) fast0/0 fast0/0/0 PUBLIC´S ADDRESS INSIDE (192.168.1.0/24)
ROUTER ====== X.X.X.X/30============= ROUTER ======== Z.Z.Z.Z/29 ============ SW 3560==============
(ISP) .253 .254 CLIENT . 47 .48
The connection with ISP or Extra net is a metro Ethernet, so the isp gave two ip address to the client: WAN (/30)
LAN (/29) Which be the public addresses to be used by the client if you need to publish any server on the network (like WWW), so they do not have any device that will could do the nat, like an asa or linux server, so the router has to do the Nat, because the SW 3560 does not support this feature.
So... I did the following:
On router 1841:
inter fast 0/0
description WAN
no shut
[ code ]...
I create an interface Blackpool to simulate the LAN connection (192.168.1.0/24)
Inter loopb 0
ip address 192.168.1.254 255.255.255.0
ip nat inside
[ code ] ...
ON SWITCH:
interface vlan 448
description LAN-ME
ip address Z.Z.Z.48 255.255.255.248
no shut
ip route 0.0.0.0 0.0.0.0 Z.Z.Z.47
But if i try to do ping from the ip address 192.168.1.0/24 to any server´s internet the ping fails, but if i do the ping from v LAN 228 the ping is success. I will think that route map could solve the problem.
View 7 Replies
View Related
Apr 8, 2011
I have 2 cisco 1841 routers the one is connected to my local network and the other is the stub router and it only has 2 fastethernet interfaces. fao/1 connected to the local network and fa0/0 connected to the internet and to the other router. How can i configure NAT on the fa0/0 which is sharing the internet and local network
View 1 Replies
View Related
Dec 12, 2011
I am configuring a 1841 router for use in small out office. I will use the s0/0/0 for main WAN T1 connection. I then wanted to use the ATM0/1/0 WIC-1-ADSL card as a failover. I am using weighted static routes for failover. Fe0/0 is LAN interface. When I go into SDM and look at the ATM interface it says this configuration is unsupported?
1. Can't I just get a DSL modem and connect it to fe0/1 and not use ATM WIC and use below for failover?
2. If I have to use ATM WIC what needs to be configured for it to work with Att aDSL?
View 1 Replies
View Related
Oct 8, 2012
I'm having 1841 Router, its configuration is not getting safed. If I reboot the router all my running-config is like default. But when I check my sh startup all the configuration which I did is displayed. Checked the config-registery too and its 0x2142 changed too 0x2102 still the same problem, when reloading the router all the running config is disappeared.
View 2 Replies
View Related
Feb 23, 2013
my problem in configuring a cisco 1841 as VPN server using SDM, everytime i press Lunch Easy VPN Wizard botton, there were no response at all. my IOS is:
Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(15)T15, RELEASE SOFTWARE (fc3)
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
System image file is "flash:c1841-advipservicesk9-mz.124-15.T15.bin
by the way I took this IOS to other router with the same model(CISCO1841).
View 2 Replies
View Related
Jun 20, 2012
I'm trying to get a PPPoE config working on an 1841. Running c1841-advsecurityk9-mz.124-3i.bin . I tried c1841-advsecurityk9-mz.151-4.M4.bin but it has even less protocol options.
I used a walkthrough but it suggests the following fragment which doesn't work because there is no "protocol ppoe" command available on my system. Perhaps there is a simpler way to do this? I tried c1841-broadband-mz.151-4.M4.bin but it doesn't seem to have ssh available.
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
exit
[Code]...
View 3 Replies
View Related
Mar 19, 2011
On new 1841 Testing Router, I deleted the flash & did the reload. After reloading, instantly I entered into the Rommon mode. I have a backup of the flash in my TFTP Server, which is connected to the 1841 Router. how can I restore my flash file into my 1841 Router. I can not get myself out of Rommon mode. I also now even can not ping the TFTP Server as well. Do I have to configure in the Rommon mode ?
how to restore the flash image via TFTP Server on my 1841 Router.
View 7 Replies
View Related
Nov 27, 2011
I have a Cisco 1841 router with an HWIC-ADSL module installed. My ADSL connection is PPPoA with a dialer interface and I have been provided 6 ip's from my provider to use on this service. Previously I have connected Fa0/0 on the 1841 straight onto my network and used NAT and ACL's on the 1841, I would now like to change this and have Fa0/0 connected to a Palo Alto firewall and use the Palo Alto to provide NAT, Firewall & site to site VPN functions. What config would I require on the 1841 to allow me to use one of my ISP IP addresses on the Palo Alto to allow it to be a VPN endpoint? Do I need to configure the 1841 in bridge mode?
View 3 Replies
View Related
Aug 5, 2012
I am trying to configure a Cisco 1841 to allow the users to access the internet. This is my first step with ppp. All the rest of the configuration is ok but I don't know how to setup the interfaces Dialer0 and ATM0/0/0.
Need very basic configuration that I can analyze and use on my device?
View 10 Replies
View Related
Jan 24, 2013
I have a Cisco 1841 Router with ADVANCE IPSERVICE IOS .The said router does not safe config, even after saving the config? As soon as the power cycled all the config will be lost? what can be done to correct this ?
View 1 Replies
View Related
May 16, 2011
I have two 1811's connected in a lab using a ipsec vpn tunnel (using a switch to simulate an internet connection between them).I am trying to configure one of the routers as a ZBPF just to allow a remote windows login (DC on the firewalled side, workstations on the other side).I'm trying to verify that the zbpf is working, but it doesn't seem to stop anything. I had match icmp added to the class-map, but took it out to test if icmp would fail. It didn't. Basically, I don't think the firewall is working at all. Any thoughts on how I can configure this so that the policies will work between zone-pairs?
Here's an quick drawing:
Here are the configurations:
Local router:
hostname sdc-1811-LocalLab
!
boot-start-marker
boot-end-marker
!
no aaa new-model
!
resource policy
[code]....
View 11 Replies
View Related
May 9, 2012
i have a 1841 cisco router and i recently purchased a 1 port HWIC wan interface card. My problem is that I cannot see the interface in my config file. Is there something i am missing?
View 8 Replies
View Related
Nov 29, 2011
we're evaulating the Cisco SM 4.2. After adding my ASA 5520 the Policies are discovered from the device except the RA VPN Policies.I tried to trigger the discovery process manually and i got this errormessage Please verify the device "IP address", "hostname", "domain name" and "port number" are correct, there is network connectivity between the CS Manager server and the device, and the device is configured to accept https connections, the device is running, and then retry this operation.which i don't understand because the other policies were retrieved just fine.
View 0 Replies
View Related
Dec 19, 2010
I have the following policy maps in on my 6509:
policy-map Customer
class QoS-voice
shape average 2000000
class class-default
fair-queue
When I apply it to an interface (int vlan1005)- I get:
Router (config-if)#service-policy output Customer
shape average command is not supported for this interface
Configuration failed!
This also happens with priority, bandwidth, etc. How can I configure QoS on this 6509 then?
View 4 Replies
View Related
Jul 17, 2012
I am position to migrate from CatOS 6509 switch to native IOS 6509 switch. long time ago, there was some site to convert automatically based on copy and paste onto the tool, but i can not find.
Does anybody know how to convert CatOS configuration to Native IOS configuration ? It is not IOS change, but it is configuration convert.
View 1 Replies
View Related
Apr 5, 2012
I tried to configure policy-map under Cisco Catalyst WS-C3560V2-24TS(c3560-ipservicesk9-mz.122-50.SE5.bin).
View 4 Replies
View Related
Dec 14, 2011
I set up a full mesh LAN-to-LAN VPN for a client with 4 sites. Each site has an ASA 5505 running 8.2(5). Site-to-site VoIP traffic runs in the VPN tunnels, as well as traffic to/from a file-server located at the main site. There are two back-up servers, one at the main site and one at a remote site. The main site has 2 bonded T1s and the other three sites have a single T1. How should I go about setting up my QoS?
My top requirement is that VoIP traffic will never be pushed out of the way for data traffic. My secondary consideration is to give more preference to file-server traffic than to web traffic and to make back-up traffic the least important. I'm currently researching to see if the VoIP provider is DSCP marking EF on the VoIP traffic, but I am going to assume they are for now. I know the IP of the file-server and back-up servers.
View 3 Replies
View Related
Jul 6, 2011
i am doind a policy NAT on the folowing scenarion.
acess-list policy_nat extended permit ip host 10.0.0.1 host 192.168.1.1
static (inside,outempresa) 170.66.53.1 access-list policy_nat
I understand that when host A 10.0.0.1 wants to connect to host B192.168.1.1 its going to be translated to 170.66.53.1 when host 192.168.1.1 wants to connect to10.0.0.1 the same entry will change the destination when the packet hits the asa from 170.66.53.1 to 10.0.0.1, is that correct ?
View 2 Replies
View Related
Feb 1, 2012
Why my 857 adv security don't have class-map and policy map command ? now i wanna use traffic shaping on this but when i use command class-map it doesn't have. [code]
View 3 Replies
View Related
Feb 27, 2011
How can I configure police-based nat to allow ICMP-only traffic on asaos 8.4.1 or 8.3?On 8.3 it was very simple:global (outside) 1 interface ,access-list outside_nat_outbound extended permit icmp any any,nat (outside) 1 access-list outside_nat_outbound.
View 10 Replies
View Related
May 26, 2013
I have a L2L tunnel I need to convert from 8.2 to 8.6 and need to understand the static policy Nat conversion. I have single hosts that require a 1-1 nat to addresses given to be my the vendor that reside on my firewall. Other works i have /24s that I static nat my inside host to so that the vendor can access the host for support.Example. server 10.11.103.44(real server on my inside network)
5.5.98.0/24-Defined for local traffic via L2Ltunnel
object-group network Carebridge_Local
description Mckesson Local network list
network-object 5.5.98.0 255.255.255.0
[code]......
How would I accomplish the same in Ver. 8.6
View 1 Replies
View Related
Aug 22, 2011
I have a weird issue with a QOS policy that I have implemented. Details are below.
This is basically the policy I have created. It is running on a Cisco 877 router (running Advance IP Services 12.4). The internet connection is an Internode ADSL service.
class-map match-any VOIP
match access-group name VOICE-OUT
!
!
[Code]....
View 14 Replies
View Related
Oct 16, 2012
I want to setup a vpn tunnel from a Cisco VPN Client in the internet over a fritzbox to the Cisco 876 (Version 15.1(4)M3) so that the vpn tunnel terminates at the Cisco 876.For that reason I used the command "crypto map mymap" on the int fastethernet 1. When I try to connect, the VPN Client opens the window for username and password but then ends with the message "not connected". When I do "debug crypto isakmp" the Cisco 876 shows the message: "phase 2 SA policy not acceptable!". [code]
View 3 Replies
View Related
Feb 21, 2012
I am trying to convert QOS policy on 6500 CAT to IOS as below,
1-getting error when try to apply on interface.
2-How can I apply both into one plicy map because IOS convertor puts into two policy maps.
CAT
set qos policer aggregate Limit_WSUS rate 4000 policed-dscp erate 4000 drop burst 1000 eburst 1000set qos policer aggregate Limit_SCCM rate 4000 policed-dscp erate 4000 drop burst 1000 eburst 1000clear qos acl all
#WSUSset qos acl ip WSUS dscp 0 aggregate Limit_WSUS ip host 172.16.9.3 any
set qos acl ip WSUS dscp 0 aggregate Limit_SCCM ip host 172.16.10.5 any
[code]....
View 0 Replies
View Related
Jul 17, 2012
I am prepping new ASA 5525-X's for a client that has multiple S2S VPN's. On some of the VPN connections, I need to do a policy nat to translate some of their subnets to a single IP address before it goes over the S2S VPN. However, when I try to use a subnet, I keep getting the following error:
Subnet cannot be used as mapped source in dynamic nat policy.
This works fine on their old ASA's which are running 8.2 code. I figured out I can use a network range, but cannot go over 65535 (or whatever it is) addresses in that range. This is very annoying when they have multiple networks they want to allow over the S2S VPN. Is there anyway around this or am I stuck creating a network range for each subnet?
View 6 Replies
View Related
Apr 11, 2011
I have devices on Inside interface of ASA that need to get to Internet to get ntp. Hence I want to set up dynamic pat (interface overload) which 8.3 style would be
-object network obj_NTP-DEV
-host 192.168.1.250
-nat (INSIDE,INTERNET) dynamic interface
But I need to limit nat to only Internet destined traffic on ntp port not all ports for traffic from 192.168.1.250.I'm not using this nat set up to control outbound access - I also have incoming RA VPN tunnels to the box and traffic from these sources need to be able to get to 192.168.1.250 and the above simple set up would break that access as all traffic involving 192.168.1.250 would get nat'd
Reading the doco I've sent myself round in a loops trying to figure how you are meant to do such a " Dynamic Policy NAT (overload)" call it what you will config in 8.3
View 2 Replies
View Related
