Restrict Internet Access To More Than 8 Computers On Wired LAN?
Feb 13, 2011
I've been using "Linksys by Cisco Wireless-N Home ADSL2+ Modem Router WAG120N". I can restrict internet access to only 8 computers using their Mac adresses but there are no ore entry fields for Mac adress than 8. What shall I do when I need to block internet access to more than 8 computers say 20 computers on wired LAN? I don't like the option blocking the internet access via IP address. I found they are not that effective as the option Mac adress
View 1 Replies
ADVERTISEMENT
Feb 23, 2013
I have 2 mbps line with D-link modem shared by 2 persons through wire. Sometime I feel that my client is using more band width than me so I want to know is there is any way I can control the speed of my client.
View 1 Replies
View Related
Jun 26, 2012
I have a client who has asked me to "optimize" their network.They currently have a few shared folders that everyone can see, but what they want is to restrict access to some of the computers on the network.More specific,they don't want the receptionist and the backroom workers to have access to those shared folders while the rest of the employees (the bosses) do have access to those folders.They have 2 computers with Windows 7, 2 computers with Windows XP, and a mac.
View 4 Replies
View Related
May 28, 2011
got myself the Netgear internal PCI wifi adapter today & it works just fine on my Windows XP SP3 desktop.
The only problem I have is the question of restricting access to kids @ home. If it was an external USB adapter, I could have just taken it away but the concern is the device being an internal & always available one. The user configuration on the PC is such that there is 1 main administrator (The actual windows "administrator" account) that no one uses. Apart from that,
- 1 user with admin privileges (me)
- 1 limited account for the kid
- 1 admin privilege account for the kid again (for purposes like installation of games which require an admin account as mandatory)
I would like for the wifi PCI card to work only when I login to my account. There must be someway by which I could disable the device or make the internet inaccesible in the other accounts,, (but pls bear that 1 of the account that the kid uses also has admin privilege)
I tried disabling the device from control panel but in vain.. (tried something like the sys admins do in corporates ..) disabling the usb ports on the PC's in my office..!
View 14 Replies
View Related
Jul 31, 2012
We're planning to ope a coffee house for teens at my church. We want the internet to be accessible to them but want to restrict what sites they can access so homework, games, etc. can be accessed but not the stuff rated for violent, rrisky behaviors.
View 1 Replies
View Related
Sep 29, 2012
How to restrict inernet access in wire lan. There is 10 nos. system are connected with lan. For lan connection we are using D-link ethernet switch.
View 1 Replies
View Related
Dec 15, 2012
The facility provides WiFi access. I'd like to configure his router to access the facility's WiFi, as WAN access to the internet while providing DHCP service to the wired ports. The idea is to use the 4 wired ports to provide inter-connectivity to each other and internet access via the router's wireless connection via wireless for internet access by the wired client machines.I'd also like to firewall the wired devices from access by other users of the facility Wireless network.Can I do that? How do I configure the wireless aspect of their Belkin Share 300N? What other settings do I have to set.
View 2 Replies
View Related
Jul 5, 2011
I would like to restrict Internet traffic (HTTP & HTTPS) for Inside Users with an ASA 5505. I would like to setup a proxy-like system where a User/Password must be entered before the User can actually browse the web.
I know that this can be done with an additional RADIUS/TACACS+ Server. Is this also possible without any external AAA Server, so with User/PW stored on the ASA locally only?
View 1 Replies
View Related
Dec 10, 2011
We are setting up a network with some restrictions for the attached clients.We're quite new at setting up a network at this size.
Used devices:
1x SRP 540 router
1x SG 300-10P managed switch
4x AP 541N accesspoint
What we want to do:
1. Around 100 laptops and desktop computers need wireless internet access, but some of them on limited times during the day.
2. Not all wireless devices are allowed on using the wireless network.
3. There are also wired desktops that don't need restrictions.
4. We need the possibility to restrict most of the wireless devices to access certain websites or use certain applications on those computers to use internet access during the times that the computers are allowed to access the internet.
5. We want to restrict the clients for using torrents or other possibilities of downloading illegal content.
What we were able to do:
1. The accesspoints (AP 541N) are clustered to achieve 1 large wireless network.
2. Only mac-adresses that are listed in the accesspoints are capable of using the wireless network. Other mac-adresses are not allowed to use the accesspoints.
What we tried already:
1. adding the mac-adresses for the accesspoints to the list of "internet access policy" in the router. Internet access seemed still possible during periods the access wasn't supposed to be possible.
2. adding the mac-adresses from all clients in this internet access policy seemed useless. Only 10 Internet Access Policies seem to be possible to program. 8 mac-adresses per policy. Knowing there are (at least) two policies needed to restrict a group of 8 macs to access the internet in 24 hours (because blocking the internet from f.e. 22u in the evening to 6 in the morning is not possible because 6 is smaller than 22 - or 10PM).Besides, after blocking internet access, we need also to write policies in blocking some websites or keywords.
View 3 Replies
View Related
Dec 11, 2012
I cant seem to access a webpage. I have 2 computer hooked up to a router and the router to a cable modem. One computer works fine and the other all of the sudden stopped being able to access the web. It says I have a connection but internet explorer and firefox can pull anything up. On bottom right it says local area connection is connected but another one says local are connection4 network cable unplugged. all cables are fine and network adapter says its working properly
View 7 Replies
View Related
Jan 29, 2013
I will like to know that i have 3 computer in a router (tplink broadband router n-series) network which has internet access but i don't want to access internet in other 2 computer how can i do that?
View 1 Replies
View Related
Sep 23, 2011
I have a wireless OS X 10.7.1 Mac a Windows 7 laptop, also wireless and one Windows 7 desktop, also wireless but close enough to my wireless modem that it can be hard lined in. If I use the "bridging" option in the modem settings, which I assume requires I enter the Mac address all devices:1. do I need to include my network printer?2. can I still access the internet from all computers?3. if I can access the internet, do I need to do so with everything going thru one computer or can they all connect independently?
View 10 Replies
View Related
Nov 23, 2012
How to block internet access some of the computers in a network
View 2 Replies
View Related
Feb 17, 2011
I have a Verison Mifi hot spot it runs two computers, I would like to know if there is some way that I can limit what is coming in on the hot spot
View 1 Replies
View Related
Dec 6, 2011
Is there anyway that I can access Remote access my computers via the internet browser.
View 4 Replies
View Related
Dec 12, 2012
I have a Netgear N600 connected to a modem. I want to connect a switch to the Netgear N600, my question is, will multiple computers connected to the SWITCH have access to the internet?
Router : Netgear N600 [URL]
Switch: Rosewill RC-405X 10/100Mbps Switch [URL]
View 4 Replies
View Related
May 8, 2011
My Dlink DIR-615 had worked flawlessly for almost 7 months now.But since last week it started showing problems.All the computers connected to LAN thru the switch could not access the Internet but the Server(192.168.0.100) which is connected to the DIR-615 could connect to the internet.the above screenshot was captured thru a laptop running Win7 Ultimate connected to the DIR-615 thru WiFi-n.Even after repeated Reloads the same error cropped up in the browsers in the computers connected thru the switch.The computers connected to the switch could access the Internet after I restarted the router.
View 7 Replies
View Related
Apr 2, 2012
the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.
View 1 Replies
View Related
Jan 8, 2012
I'm a college student working on a lab involving a Cisco PIX 501 Firewall.
My project involves 1 computer and a firewall. My goal is to use the firewall to allow access to the internet for that computer which uses a static IP 192.168.1.5 and ONLY for that IP address. The firewall is connected to the internet.
I have the computer hooked up to the firewall with the serial and using hyper terminal to enter commands. I think I need to use access lists in order to deny traffic on those ports for those particular hosts. I can't figure out exactly how I need to set it up.
What I need to do is permit internet access for 192.168.1.5 alone. Any other IP should not be able to access the internet.
I tried:
access-list 1 permit tcp host 192.168.1.5 any eq 80
access-group 1 in interface inside
I cannot access the internet using the computer with 192.168.1.5. The goal is to be able to access with that IP and no other.
View 6 Replies
View Related
Jun 5, 2012
i am not sure if this question has been raised before. My company recently bought a Cisco 1941 router and we have been using a Lynksis router connecting to our ISP using WiMax all along. I have configured the new cisco1941 to the best of my knowledge but something strange is happening on my network. I can open www.gmail.com from any machine but i cant open anything else even www.google.com . What could be causign that ?
My config is as follows :
Current configuration : 4478 bytes
!
!
No configuration change since last restart
version 15.1
[Code].....
View 9 Replies
View Related
Mar 6, 2011
In our neighborhood we have about 10 residents on a LAN controlled by 1 resident. For connection I have a LAN modem which connects wirelessly to an aerial at resident 1. I have 2 computers one with Win 7 Ultimate and one with XP SP3. Thinking incorrectly that I was setting up a home network, in trying to get my 2 PC's to talk to one another I have permissions set up for everyone on both machines. However I have discovered that now all 10 residents can see my 2 PC's. While I can see both PC's from either machine, in trying to change the "Everyone" to restrict access to the names of each of the 2 pcs only, I can only see users and Administrator on that particular machine only and cannot add a user/name of the other PC. How can I stop the other residents from seeing my machine but allow me to see either of my machines from one another?
View 5 Replies
View Related
Apr 23, 2011
. In our neighborhood we have about 10 residents on a LAN controlled by 1 resident. For connection I have a LAN modem which connects wirelessly to an aerial at resident 1. I have 2 computers one with Win 7 Ultimate and one with XP SP3. Thinking incorrectly that I was setting up a home network, in trying to get my 2 PC's to talk to one another I have permissions set up for everyone on both machines. However I have discovered that now all 10 residents can see my 2 PC's. While I can see both PC's from either machine, in trying to change the "Everyone" to restrict access to the names of each of the 2 pcs only, I can only see users and Administrator on that particular machine only and cannot add a user/name of the other PC.
View 2 Replies
View Related
Nov 17, 2012
I have a WRT54G that has worked fine for years, with some PCs hooked up with Ethernet and various other devices connected wirelessly. I came home this afternoon and nothing going through the router could connect to the internet. I've made no changes to anything recently.
I did troubleshooting with Comcast, and we determined that when their modem was hooked up directly to my computer then that computer could connect to the net. Problem solved as far as they are concerned--my router is busted. But I can still connect to the router, and enter its admin screen, and everything looks fine there. The computers on the router can all see each other. So the router is working.
Once I hooked it back up to the modem my computers all lost their internet, but the router does get an IP successfully from Comcast. And it even assigns IPs to my computers that are hooked up to it. It's just that for some reason they still cannot get past the router.I used the ping function in the router admin site and the router pinged Google no problem. My PCs can ping the router without difficulty. But the computers cannot ping Google.
I've tried every combination of power cycles and reboots you can name. I've tried duplicating the MAC address of the PC that connected to the internet onto my router. None of it has made any difference.
View 5 Replies
View Related
Sep 1, 2012
Does LMS 4.1 support some way of restricting access to its web GUI to specific IP list?
View 2 Replies
View Related
Aug 30, 2011
Have a new DIR-825 setup at home for coverage to another part of the house. I want to completely restrict clients using this WAP from accessing a couple internal IP's (that I use for work-related things). Restriction meaning filesharing, ping, RDP, etc - everything. Can this be done on the router side?
View 3 Replies
View Related
May 13, 2013
I have joined my ACS box to the domain and can auth users in active directory groups. I thought about this somewhat and would prefer to only use AD users in ACS groups. Is this possible, I can only seem to do local users in local groups and AD users in AD groups.Many people have access to AD so I don't want anyone to be able to move users in and out of AD groups and get access to equipment.
View 5 Replies
View Related
Apr 1, 2011
I use a Ethernet Powerline adapter.Right now, there are 5 other computers on my wired network, and i don't know what they are. What are they doing there, and how do i get them out?
View 6 Replies
View Related
Nov 18, 2012
How can I restrict wireless access to specific devices? Ideally, I would like to turn the access off and on to restrict my children's usage when we're not around or when they try to sneak on during the night.
View 5 Replies
View Related
Oct 20, 2012
is it possible to restrict the Remote Access VPN to ASA based on the Source Public IP , if so how ?
here I am not talking about the VPN-Filter under group-policy . I Want to restrict the access from specified source IP ( Public IP)
View 1 Replies
View Related
Sep 13, 2011
Client: CISCO VPN Client
VPN server: Cisco Concentrator 3020 OS v 4.7
I want to get away from configuring split tunneling for security reasons. With Split tunneling and I am able to specify to which subnets the clients have access to. I do it defining "Network Lists"
When I modify the group and select "tunnel everything" under "client config" tab, the users then can access all subnets in the LAN. When I select this option the "Split tunneling network list" is grayed out
End goal is to make all traffic go thru the tunnel but be able to resctrict access to speficic subnets.
View 1 Replies
View Related
Dec 13, 2012
Is it possible to deny VPN access to specific AD accounts?
Currently setup with 5520, LDAP authentication for VPN users.
View 3 Replies
View Related
Nov 2, 2012
I have a dell desktop running windows vista that connects to my wireless router with a cable. I have an HP laptop that is running windows 7 that is wireless.When I look at network computers on the dell I get an error message that says that the computer is not accessible. The same thing happens when I try to log onto the desktop from the laptop. When I try to run the network wizard from the desktop, I see see connect to the internet, connect to a wireless router or access point, setup a dialup connection and connect to a workplace.None of them make sense but I tried connect to a wireless router and got a message that said to set it up manually or set up a flash drive, neither of which makes sense. I tried set it up manually and all that happened is the router setup screen opened up.I tried the same thing on the laptop and the setup the network wizard opened a screen that said choose a wireless router or access point to configure, but nothing ever showed up on that screen.
View 2 Replies
View Related
Jan 28, 2013
I want to setup a hard wired network for 30 computers
View 1 Replies
View Related
