Restrict Internet Access To Particular Users?
May 28, 2011
got myself the Netgear internal PCI wifi adapter today & it works just fine on my Windows XP SP3 desktop.
The only problem I have is the question of restricting access to kids @ home. If it was an external USB adapter, I could have just taken it away but the concern is the device being an internal & always available one. The user configuration on the PC is such that there is 1 main administrator (The actual windows "administrator" account) that no one uses. Apart from that,
- 1 user with admin privileges (me)
- 1 limited account for the kid
- 1 admin privilege account for the kid again (for purposes like installation of games which require an admin account as mandatory)
I would like for the wifi PCI card to work only when I login to my account. There must be someway by which I could disable the device or make the internet inaccesible in the other accounts,, (but pls bear that 1 of the account that the kid uses also has admin privilege)
I tried disabling the device from control panel but in vain.. (tried something like the sys admins do in corporates ..) disabling the usb ports on the PC's in my office..!
View 14 Replies
ADVERTISEMENT
Dec 13, 2012
Is it possible to deny VPN access to specific AD accounts?
Currently setup with 5520, LDAP authentication for VPN users.
View 3 Replies
View Related
Feb 12, 2013
I need a way to block MAC OS X users connecting remotely to our coporate users over VPN. I know there is an option to block connections based on VPN client Version, but cant find a way to block users based on operating system.
We use Cisco ASA 5510 firewals one with v8.2(1) and other with v7.2(3). I need to do on both firewalls. They are both at diffrent sites.
View 4 Replies
View Related
Jul 31, 2012
We're planning to ope a coffee house for teens at my church. We want the internet to be accessible to them but want to restrict what sites they can access so homework, games, etc. can be accessed but not the stuff rated for violent, rrisky behaviors.
View 1 Replies
View Related
Sep 29, 2012
How to restrict inernet access in wire lan. There is 10 nos. system are connected with lan. For lan connection we are using D-link ethernet switch.
View 1 Replies
View Related
Feb 13, 2011
I've been using "Linksys by Cisco Wireless-N Home ADSL2+ Modem Router WAG120N". I can restrict internet access to only 8 computers using their Mac adresses but there are no ore entry fields for Mac adress than 8. What shall I do when I need to block internet access to more than 8 computers say 20 computers on wired LAN? I don't like the option blocking the internet access via IP address. I found they are not that effective as the option Mac adress
View 1 Replies
View Related
Feb 23, 2013
I have 2 mbps line with D-link modem shared by 2 persons through wire. Sometime I feel that my client is using more band width than me so I want to know is there is any way I can control the speed of my client.
View 1 Replies
View Related
Jul 5, 2011
I would like to restrict Internet traffic (HTTP & HTTPS) for Inside Users with an ASA 5505. I would like to setup a proxy-like system where a User/Password must be entered before the User can actually browse the web.
I know that this can be done with an additional RADIUS/TACACS+ Server. Is this also possible without any external AAA Server, so with User/PW stored on the ASA locally only?
View 1 Replies
View Related
Dec 10, 2011
We are setting up a network with some restrictions for the attached clients.We're quite new at setting up a network at this size.
Used devices:
1x SRP 540 router
1x SG 300-10P managed switch
4x AP 541N accesspoint
What we want to do:
1. Around 100 laptops and desktop computers need wireless internet access, but some of them on limited times during the day.
2. Not all wireless devices are allowed on using the wireless network.
3. There are also wired desktops that don't need restrictions.
4. We need the possibility to restrict most of the wireless devices to access certain websites or use certain applications on those computers to use internet access during the times that the computers are allowed to access the internet.
5. We want to restrict the clients for using torrents or other possibilities of downloading illegal content.
What we were able to do:
1. The accesspoints (AP 541N) are clustered to achieve 1 large wireless network.
2. Only mac-adresses that are listed in the accesspoints are capable of using the wireless network. Other mac-adresses are not allowed to use the accesspoints.
What we tried already:
1. adding the mac-adresses for the accesspoints to the list of "internet access policy" in the router. Internet access seemed still possible during periods the access wasn't supposed to be possible.
2. adding the mac-adresses from all clients in this internet access policy seemed useless. Only 10 Internet Access Policies seem to be possible to program. 8 mac-adresses per policy. Knowing there are (at least) two policies needed to restrict a group of 8 macs to access the internet in 24 hours (because blocking the internet from f.e. 22u in the evening to 6 in the morning is not possible because 6 is smaller than 22 - or 10PM).Besides, after blocking internet access, we need also to write policies in blocking some websites or keywords.
View 3 Replies
View Related
May 28, 2011
got myself the Netgear internal PCI wifi adapter today & it works just fine on my Windows XP SP3 desktop.
The only problem I have is the question of restricting complete internet access to kids @ home. If it was an external USB adapter, I could have just taken it away but the concern is the device being an internal & always available one.
The user configuration on the PC is such that there is 1 main administrator (The actual windows "administrator" account) that no one uses. Apart from that,
- 1 user with admin privileges (me)
- 1 limited account for the kid
- 1 admin privilege account for the kid again (for purposes like installation of games which require an admin account as mandatory)
I would like for the wifi PCI card to work only when I login to my user account. There must be someway by which I could disable the device or make the internet inaccessible in the other accounts,, (but pls bear that 1 of the account that the kid uses also has admin privilege)
I tried disabling the device from control panel but in vain.. (tried something like the sys admins do in corporates ..) disabling the usb ports on the PC's in my office..!
View 4 Replies
View Related
Jan 10, 2012
restricting access to internet for roughly 20 users. Right now we are connected using broadbandand using dhcp as assigned by common switch. All pc's are in a common workgroup. recommend me the hardware / software required to restrict this access.
1. Will I require a router as well as a switch ? or should I simply get a new switch ( for more then 20 users ) This would mean static ip for all users.
2. My idea is to create a AD server and use websense on it so that users who require internet access can still open internet sites but will be restricted through websense proxy.
View 1 Replies
View Related
Feb 9, 2012
The goal is to add a 2801 router between a DSL modem and a switch and obviously still access the internet. I connected and configured as explained below and the results are:
- I am able to ping internet addresses from the 2801 router
- I am not able to ping internet addresses from userlaptop but I am able to ping LAN gateway (192.168.254.254)
I cannot understand why the internet requests from the user laptopuser are not routed to the internet but the router itself can access the internet.
INTERNET====DSLmodem=====CISCO2801=====unmanagedSwitch=====userlaptop
DSLmodem:
non-bridged mode and does the PPPOe authentication.
WAN interface: Dynamic IP address assigned by ISP
[Code].....
View 14 Replies
View Related
Feb 28, 2013
I have configured and tested an ASA-5505 that will be deployed at a customer's home. The ISP cable modem will connect to the E0 (outside) interface of the ASA. All other interfaces on the ASA are configured for the inside network 192.168.5.0/24. I have created a VPN site-to-site tunnel between this ASA and the UC540 to allow 192.168.5.0/24 subnet access to the internal networks on the UC540.
The user has requested that all the network devices used by the rest of the family will only need to connect to the Internet. They will not need access to the VPN tunnel and they will not need access to the computers on the 192.168.5.0/24 inside network. I was planning on performing the following tasks to get this to work.
View 2 Replies
View Related
Jan 21, 2013
I'm currently undergoing CCNa academy so I got a "job" from my boss to configure Cisco 871 router. Unfortunately we just finished first semester at academy so there are some things that I'm still having hard time to understand. I managed to configure router so it connect to internet or to be exact it has internet access through another adsl modem that is in bridge mode. url...The problem is that users are not able to use internet when connected to this router. I'm able to access router through telnet ( ip 192.168.13.10) but that's it.192.168.13.0 255.255.255.128 is network that we use at work. 192.168.13.5 is IP address that is assigned to zyxel adsl modem ( If I'm correct, we could have used any address here since we are connecting this directly to router ? ) Zyxel adsl modem is connected to FA4 port on Cisco router. LAN cable is connected to FA0 port and from there it goes to switch ( it's some asus switch with 50 ports). [code]
If I ping google dns from router e.g. ping 8.8.8.8 it works. If I ping url... it doesn't work. Also I'm able to access router via 192.168.13.10 but if I use router as default gateway then I'm not able to access the internet.
View 8 Replies
View Related
Mar 19, 2013
We have a Cisco 3750 stack connecting to the MPLS router, able to ping 8.8.8.8 - [URL], the internal users on their own Vlan can ping the default gateway the 3750 switch but no further, trace route from the PC/Servers stops at the 3750 stack.We have the switch configured to ip route 0.0.0.0 0.0.0.0 to the public interface in the MPLS router, from the switch I'm able to ping the internet.
View 17 Replies
View Related
May 16, 2012
I am able to successfully connect to my ASA5505 via AnyConnect via a mobile device. Upon doing so, I lose internet connectivity. My access list appear to be correct to I'm sort of at a loss.
[code]....
View 6 Replies
View Related
Oct 4, 2012
We have an ethernet port on Cisco router 1800 connected to the ADSL modem. The router does ip nat translation, but users complained it is slow when they access to internet. [code]
View 1 Replies
View Related
Mar 6, 2011
In our neighborhood we have about 10 residents on a LAN controlled by 1 resident. For connection I have a LAN modem which connects wirelessly to an aerial at resident 1. I have 2 computers one with Win 7 Ultimate and one with XP SP3. Thinking incorrectly that I was setting up a home network, in trying to get my 2 PC's to talk to one another I have permissions set up for everyone on both machines. However I have discovered that now all 10 residents can see my 2 PC's. While I can see both PC's from either machine, in trying to change the "Everyone" to restrict access to the names of each of the 2 pcs only, I can only see users and Administrator on that particular machine only and cannot add a user/name of the other PC. How can I stop the other residents from seeing my machine but allow me to see either of my machines from one another?
View 5 Replies
View Related
Apr 23, 2011
. In our neighborhood we have about 10 residents on a LAN controlled by 1 resident. For connection I have a LAN modem which connects wirelessly to an aerial at resident 1. I have 2 computers one with Win 7 Ultimate and one with XP SP3. Thinking incorrectly that I was setting up a home network, in trying to get my 2 PC's to talk to one another I have permissions set up for everyone on both machines. However I have discovered that now all 10 residents can see my 2 PC's. While I can see both PC's from either machine, in trying to change the "Everyone" to restrict access to the names of each of the 2 pcs only, I can only see users and Administrator on that particular machine only and cannot add a user/name of the other PC.
View 2 Replies
View Related
Apr 4, 2012
How does one configure the router so that Internet users can access internal company websites? The only thing that appears is the Cisco router login. Also I need to configure Terminal Services and its not on the list under Service.
View 2 Replies
View Related
Sep 1, 2012
Does LMS 4.1 support some way of restricting access to its web GUI to specific IP list?
View 2 Replies
View Related
Aug 30, 2011
Have a new DIR-825 setup at home for coverage to another part of the house. I want to completely restrict clients using this WAP from accessing a couple internal IP's (that I use for work-related things). Restriction meaning filesharing, ping, RDP, etc - everything. Can this be done on the router side?
View 3 Replies
View Related
May 13, 2013
I have joined my ACS box to the domain and can auth users in active directory groups. I thought about this somewhat and would prefer to only use AD users in ACS groups. Is this possible, I can only seem to do local users in local groups and AD users in AD groups.Many people have access to AD so I don't want anyone to be able to move users in and out of AD groups and get access to equipment.
View 5 Replies
View Related
Nov 18, 2012
How can I restrict wireless access to specific devices? Ideally, I would like to turn the access off and on to restrict my children's usage when we're not around or when they try to sneak on during the night.
View 5 Replies
View Related
Oct 20, 2012
is it possible to restrict the Remote Access VPN to ASA based on the Source Public IP , if so how ?
here I am not talking about the VPN-Filter under group-policy . I Want to restrict the access from specified source IP ( Public IP)
View 1 Replies
View Related
Sep 13, 2011
Client: CISCO VPN Client
VPN server: Cisco Concentrator 3020 OS v 4.7
I want to get away from configuring split tunneling for security reasons. With Split tunneling and I am able to specify to which subnets the clients have access to. I do it defining "Network Lists"
When I modify the group and select "tunnel everything" under "client config" tab, the users then can access all subnets in the LAN. When I select this option the "Split tunneling network list" is grayed out
End goal is to make all traffic go thru the tunnel but be able to resctrict access to speficic subnets.
View 1 Replies
View Related
Jun 26, 2012
I have a client who has asked me to "optimize" their network.They currently have a few shared folders that everyone can see, but what they want is to restrict access to some of the computers on the network.More specific,they don't want the receptionist and the backroom workers to have access to those shared folders while the rest of the employees (the bosses) do have access to those folders.They have 2 computers with Windows 7, 2 computers with Windows XP, and a mac.
View 4 Replies
View Related
Mar 26, 2012
I need to restrict access or rather, block altogether if i can, access of one of the computers on my local wireless network, to online multi-player gaming sites, in particular Age of Empires and Voobly.com, which also uses a messenger type program for them to chat.I've searched and searched online, but alas, have come up with nothing that i understand. I've tried doing the block ports thing, but am unsure if what i've been doing is right. I have blocked Voobly.com under domain and URL settings via the router admin page, but for some reason, it only seems to be denied on my computer. I even went so far as to register and download relevant programs to my computer, for Voobly, so i could see if the blocking worked. Seems it's only my computer that's blocked, i didn't specify ip or mac addresses.I am unable to get on the other computer as it's not mine, and it's also password locked. I don't know the password
View 1 Replies
View Related
Jan 16, 2011
I have 4 PCs connected to a wireless modem router(WBR 6601).All 4PCs are configured to shared all folder in C drive. These PCs are not configure to use domain.The thing is whenever I let my guest to connect to my wireless modem router for internet usage. They will be able to see all of my shared Folder(4 PCs) under the network Terminals.Is there anyway i can restrict the guest from accessing/seeing my shared folder and allow them to connect to my WAP to use for internet browsing only ?
[code]....
View 9 Replies
View Related
Jan 26, 2011
I am wondering how to restrict access to certain applications; software and hardware via a router.
View 2 Replies
View Related
Jun 30, 2012
What are good ways to restrict access to LOL? I don't want a total block, but either set a cut off time - and/or restrict the total access time per day?
View 2 Replies
View Related
Oct 12, 2011
We will be opening a shop with a number of computers available to the public connected to the Web via one ISP with fixed IP using a RV220W router.
We wish to restrict web access to our company's web site only, say 'OurCompany.com'; how can we code this in the router?
View 4 Replies
View Related
Apr 15, 2013
We have purchased an RV110W and I need to restrict internet access to the entire internet with the exception of 4 websites that are required for employees to do their jobs. I need to do this on 3 specific machines, not the entire network. I have looked at the internet access and schedule management pages of the router and just can seem to figure out how to do this.
View 8 Replies
View Related
