Restrict Folder Access For Guest Wireless Login?
Jan 16, 2011
I have 4 PCs connected to a wireless modem router(WBR 6601).All 4PCs are configured to shared all folder in C drive. These PCs are not configure to use domain.The thing is whenever I let my guest to connect to my wireless modem router for internet usage. They will be able to see all of my shared Folder(4 PCs) under the network Terminals.Is there anyway i can restrict the guest from accessing/seeing my shared folder and allow them to connect to my WAP to use for internet browsing only ?
[code]....
View 9 Replies
ADVERTISEMENT
Jan 17, 2011
I have 4 PCs connected to a wireless modem router(WBR 6601). All 4PCs are configured to shared all folder in C drive. These PCs are not configure to use domain.The thing is whenever I let my guest to connect to my wireless modem router for internet usage. They will be able to see all of my shared Folder(4 PCs) under the network Terminals.Is there anyway i can restrict the guest from accessing/seeing my shared folder and allow them to connect to my WAP to use for internet browsing only ? :scratch:
My equipment :scratch::-
PC #1 - Acer M1830(Windows 7 Home Premium)
PC #2 - Acer M1900(Windows 7 Home Premium)
PC #3 - DELL Vostro(Windows XP Pro)
PC #4 - DELL Inspiron(Windows XP Pro)
Level 1 WBR 6601 Wireless/Modem Router
If there are no configuration can be done is there any hardware tools that have this restricting feature ?
View 11 Replies
View Related
Nov 11, 2012
is it possible to eliminate the the guest login screen from being displayed/required to acess router from an added device(like a smart tv with a web browser)?router is an e2500,approx.
View 4 Replies
View Related
Feb 5, 2013
We have Cisco WLC 7.0 with private and public accesses. Is it possible to limit guest session time? For example, any visitors’ connection will be disconnected after 1 hour.
View 3 Replies
View Related
Aug 18, 2011
Is it possible to allow certain websites to bypass the web authentication pages, so that they do not need to authenticate to get to our own website, but do have to if they wish to go anywhere else?Looking at a 5508 model at the moment
View 4 Replies
View Related
Feb 9, 2013
Is it possible to change the look of welcome page (guest login) to change so that it is personal. Of course it would be great if the guests have to log on your personal page.On this page you would be able to indicate the rules and and limitations. It would also be a good option for certain that your guests a limited time duration for the connection and gives max download. This would also be found to be in a log.
View 2 Replies
View Related
Jun 11, 2011
When Im connected to the GUEST network and open the web-browser it will not open the Linksys guest-login page. Why?(latest firmware ver.1.0.01(Build10) installed)
View 9 Replies
View Related
Oct 30, 2012
I have a Cisco network at my office and the router and everything is set up under my desk.I can use the internet just fine on my office computer but I am trying to use it on my laptop and login to the guest account .I ran across the Cisco Connect sofware and that I need it to find the password but the problem is I dont think I have a router or whatever it is that is compatible with this software I am using WRT54g wireless n router, the models on the site for the cisco connect are e series
View 1 Replies
View Related
Jan 25, 2011
Config:
Netgear ProSafe Gigabit Router is my DHCP Server -- The entire home net work is on the same subnet (192.168.15.xxx)
Linksys E4200 configured as an access point ONLY -- wired connection -- static IP assigned -- DHCP server turned off
Linksys WRT610N configured as an access point ONLY -- wired connection -- static IP assigned -- DHCP server turned off
3 -- 5 port gigabit switches
1 -- 8 port gigabit switch
No more than two switches between any two wired devices Both Linksys access points have the same SSID and WPA2 security phrase -- total of 4 radios Nonoverlapping channels are selected on both the 2.4Ghz and 5.0Ghz radio to minimize interference All computers are running Windows 7 Professional 64bit with all the latest updates Two iPhones and one iPad also access the network All LAN and WAN connectivity is working as designed?
Problem:
guest SSID is turned on
password is established
All devices will connect to the guest SSID and the E4200 is assigning an ip address to the device in the 192.168.33.xxx range which is what it's supposed to do.When I open a web browser, I am not automatically redirected to the Cisco Login Page. If I enter 192.168.33.1 as the URL, the login screen is presented. I enter the password I have created in the guest admin page on the wireless guest tab. I then see a blank page and a URL of 192.168.33.1/guestnetwork.asp. THIS IS WHERE I GET STUCK. THE ONLY WAY TO EVER SEE THE LOGIN PAGE AGAIN IS TO REBOOT THE E4200, otherwise you just get unable to connect messages when opening web browsers and the wireless status icon in the system tray shows a yellow exclamation mark.
I successfully connect to the guest SSID but I do not get access to the internet. When I type ipconfig, I see that the DNS is set to 192.168.33.1 which does not exist on my network. I assume there's some internal NAT magic that is supposed to happen in the E4200 to bridge me over to my 192.168.15.xxx network but it doesn't seem to be happening.At the beginning of the call I specifically asked them if the E4200 must be the DHCP server in order for the guest SSID feature to work and they said no. 1.5 hours later they had no answers so they told me that it wasn't working because the E4200 was not the DHCP server. The documentation says nothing about a DHCP requirement for guest AP service. Linksys support further could not answer what you would do if you needed more than one AP with guest service enabled.It seems like this is a firmware issue but it may be the guest SSID service requires the E4200 to also act as the DHCP server. Whether this is a bug or if the router/AP is working as designed?
View 9 Replies
View Related
Aug 11, 2011
I have an E3000 with firmware version 1.0.04 with WiFi configured as:Guest5GHz (only N)2.4 GHz (only G)I use the guest network access for my guests or my neighbor.Usually they connect and the first page they see in the browser is the http://192.168.33.1/login.asp were they put the password. Some times shomething don’t work and the browser don’t show the page, so the people can’t use the connection because they get a timeout error.The only solution I have in this case is to resart the router, but sometimes is not enough and I have to fisically shotdown and restart it.The login.asp page starts with: This is UNPUBLISHED PROPRIETARY SOURCE CODE of CyberTAN Inc. the contents of this file may not be disclosed to third parties, copied or duplicated in any form without the prior written permission of CyberTAN Inc. This software should be used as a reference only, and it not intended for production use! What about a firmware update to fix it and give the control from the web administration over the guest network?
View 5 Replies
View Related
Oct 8, 2012
I am planning on having a contractor in to configure some new routers and would like for him to login using the local account on the routers while company personal continues to use radius is this possible.
View 6 Replies
View Related
Sep 20, 2012
With M10, I cannot restrict internet access for specific time period. Parent Control feature doesn't satisfy the situation, and there is no build-in access-policy in web-based setup. Are you going to upgrade firmware or Cisco Connect with more flexible access time control?
View 1 Replies
View Related
Dec 10, 2011
We are setting up a network with some restrictions for the attached clients.We're quite new at setting up a network at this size.
Used devices:
1x SRP 540 router
1x SG 300-10P managed switch
4x AP 541N accesspoint
What we want to do:
1. Around 100 laptops and desktop computers need wireless internet access, but some of them on limited times during the day.
2. Not all wireless devices are allowed on using the wireless network.
3. There are also wired desktops that don't need restrictions.
4. We need the possibility to restrict most of the wireless devices to access certain websites or use certain applications on those computers to use internet access during the times that the computers are allowed to access the internet.
5. We want to restrict the clients for using torrents or other possibilities of downloading illegal content.
What we were able to do:
1. The accesspoints (AP 541N) are clustered to achieve 1 large wireless network.
2. Only mac-adresses that are listed in the accesspoints are capable of using the wireless network. Other mac-adresses are not allowed to use the accesspoints.
What we tried already:
1. adding the mac-adresses for the accesspoints to the list of "internet access policy" in the router. Internet access seemed still possible during periods the access wasn't supposed to be possible.
2. adding the mac-adresses from all clients in this internet access policy seemed useless. Only 10 Internet Access Policies seem to be possible to program. 8 mac-adresses per policy. Knowing there are (at least) two policies needed to restrict a group of 8 macs to access the internet in 24 hours (because blocking the internet from f.e. 22u in the evening to 6 in the morning is not possible because 6 is smaller than 22 - or 10PM).Besides, after blocking internet access, we need also to write policies in blocking some websites or keywords.
View 3 Replies
View Related
Feb 11, 2013
I'm setting a Wireless Guest with a WLC 5508 (7.3) and ISE (1.1.2) -- (no anchor).It appears to work (still some adjustments are required), but I found when the guest user log in, it receives the successful login screen and inmediately the guest portal again. If another browser window or tab is open, the user can browse properly.
View 5 Replies
View Related
May 7, 2013
I have a EA6500 with a hard drive connected to the USB port. When I try to copy a file to the drive VIA the network folder on my computer it says "Destination Folder Access Denied, You Need Permision To Perform This Action". I used to be able to copy files to the drive so I am sure it is just a setting on the router or something.
View 5 Replies
View Related
Feb 25, 2013
Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
I am trying to restrict external access to a ftp server I have running, to a single external IP address. Is this possible? It can be done for the Remote Management IP Address page, where you can enter a single address or 255.255.255.255 to allow all external hosts. But the set up of a virtual server does not appear to have that option.
View 1 Replies
View Related
Oct 1, 2012
I have setup a WAP321 with the captive portal activated.2 WLAN networks defined, one for the Normal-user and 1 Guest-user access (with captive portal).
The WAP Management is on its own vlan (vlan 1 ) , network 10.0.0.0 /24
The Normal network has a different vlan (vlan 14) , network 192.168.14.0/24
Guest user(s) are on VLAN143 , 172.16.10.0 /24
So when a guest connects to the wap, the management interface is opened (10.0.0.x), after successful authentication the user is redirected to a predefined site.What i would like to establish is to make it impossible for the Guest-user(s) to access the management portal.
Defining an acl on the management portal is not possible as i would like to use any ip adres on the Normal Network (192.168.14.0/24). Unfortunately you can only define 5 Fixed ipaddresses and not a (sub)-network.
View 1 Replies
View Related
Dec 28, 2011
I have created a share (entire partition) on my external hard drive, which is connected to my E4200 router. The connection to the share is \192.168.1.1ExHDOn the hard drive I've got a folder called "Mijn muziek" (Dutch for My music). So when i go to \192.168.1.1ExHDMijn muziek, the content of the folder is shown. The weird thing is, I can rename the folder, but i cannot add anything to the folder or remove anything from it. I can add files to other folders on the hard driveAnother thing I don't understand is that his folder shows up as "Music" when I create the share.Music is not a folder on the hard drive, but when I go to \192.168.1.1ExHDMusic, i'm in the "Mijn muziek" folder.I have the exact same problems with the folders "Mijn documenten" (shown as Documents) and "Mijn afbeeldingen" (shown as Pictures). Why i don't have write access on the Mijn muziek folder? And how I can manage to get write access on it?
View 4 Replies
View Related
Feb 2, 2013
I'm trying map the USB hard drive connected to my EA4500 router as a network drive in Windows 7, and it works perfectly until I enable secure folder access on the router.
After enabling secure folder access, and not changing any other settings on the router I first unmount the drive since it was set up without credentials and doesn't work that way any more. When I try to remap the drive I use the same address, but select "Connect using different credentials" When it prompts me for the log in info I try using the router admin account, but it fails to connect. Windows network diagnostics tells me the device refused the connection. I proceeded to set up an account on the router under the folder access settings with the same username, and password I use on my computer, and tried to connect it without checking "Connect using different credentials" (And typing them in manually if that matters) with the same results.
Even with secure folder access enabled I can still reach the drive just fine by typing "ftp://192.168.1.1/" into file explorer. It prompts me for a username and password, I put in the admin credentials, and I'm in. Even the account I created with the same username/password as my computer works this way.
After disabling secure folder access everything works perfectly fine again... I would MUCH rather do this with it though.
Following these directions: [URL] When clicking the browse button the router shows up when secure folder access is disabled, but does not after it is enabled. I've looked through my windows sharing settings, and haven't noticed anything that should cause problems, pretty much everything is enabled. I've also tried turning off my firewall with no success.
View 7 Replies
View Related
Mar 6, 2011
In our neighborhood we have about 10 residents on a LAN controlled by 1 resident. For connection I have a LAN modem which connects wirelessly to an aerial at resident 1. I have 2 computers one with Win 7 Ultimate and one with XP SP3. Thinking incorrectly that I was setting up a home network, in trying to get my 2 PC's to talk to one another I have permissions set up for everyone on both machines. However I have discovered that now all 10 residents can see my 2 PC's. While I can see both PC's from either machine, in trying to change the "Everyone" to restrict access to the names of each of the 2 pcs only, I can only see users and Administrator on that particular machine only and cannot add a user/name of the other PC. How can I stop the other residents from seeing my machine but allow me to see either of my machines from one another?
View 5 Replies
View Related
Apr 23, 2011
. In our neighborhood we have about 10 residents on a LAN controlled by 1 resident. For connection I have a LAN modem which connects wirelessly to an aerial at resident 1. I have 2 computers one with Win 7 Ultimate and one with XP SP3. Thinking incorrectly that I was setting up a home network, in trying to get my 2 PC's to talk to one another I have permissions set up for everyone on both machines. However I have discovered that now all 10 residents can see my 2 PC's. While I can see both PC's from either machine, in trying to change the "Everyone" to restrict access to the names of each of the 2 pcs only, I can only see users and Administrator on that particular machine only and cannot add a user/name of the other PC.
View 2 Replies
View Related
May 26, 2011
I would like to access dos folder from XP machine. I installed Microsoft Client 3.0 on DOS machine. My DOS machine can see shared folders on XP machine. My DOS machine is shown on XP but cannot browse DOS shared folders.
View 2 Replies
View Related
Sep 1, 2012
Does LMS 4.1 support some way of restricting access to its web GUI to specific IP list?
View 2 Replies
View Related
May 9, 2012
I have two SSIDs on an Autonomous Access Point, that goes to a 2960 switch, that connects to a L3 3560. I have a vlan for admin/private internal access that uses the native vlan (1) and guest vlan (50). I have configured both and I am trying to get both to go out the same Internet connection.
I cannot get the guest access to access the Internet. It looks like my computer will go, but it just comes up saying no Internet access.All interfaces are trunking this vlan properly. I can communicate from the laptop to the 3560 but I just can't get to the Internet.
View 10 Replies
View Related
May 28, 2011
got myself the Netgear internal PCI wifi adapter today & it works just fine on my Windows XP SP3 desktop.
The only problem I have is the question of restricting access to kids @ home. If it was an external USB adapter, I could have just taken it away but the concern is the device being an internal & always available one. The user configuration on the PC is such that there is 1 main administrator (The actual windows "administrator" account) that no one uses. Apart from that,
- 1 user with admin privileges (me)
- 1 limited account for the kid
- 1 admin privilege account for the kid again (for purposes like installation of games which require an admin account as mandatory)
I would like for the wifi PCI card to work only when I login to my account. There must be someway by which I could disable the device or make the internet inaccesible in the other accounts,, (but pls bear that 1 of the account that the kid uses also has admin privilege)
I tried disabling the device from control panel but in vain.. (tried something like the sys admins do in corporates ..) disabling the usb ports on the PC's in my office..!
View 14 Replies
View Related
Jul 31, 2012
We're planning to ope a coffee house for teens at my church. We want the internet to be accessible to them but want to restrict what sites they can access so homework, games, etc. can be accessed but not the stuff rated for violent, rrisky behaviors.
View 1 Replies
View Related
Sep 29, 2012
How to restrict inernet access in wire lan. There is 10 nos. system are connected with lan. For lan connection we are using D-link ethernet switch.
View 1 Replies
View Related
Aug 30, 2011
Have a new DIR-825 setup at home for coverage to another part of the house. I want to completely restrict clients using this WAP from accessing a couple internal IP's (that I use for work-related things). Restriction meaning filesharing, ping, RDP, etc - everything. Can this be done on the router side?
View 3 Replies
View Related
May 13, 2013
I have joined my ACS box to the domain and can auth users in active directory groups. I thought about this somewhat and would prefer to only use AD users in ACS groups. Is this possible, I can only seem to do local users in local groups and AD users in AD groups.Many people have access to AD so I don't want anyone to be able to move users in and out of AD groups and get access to equipment.
View 5 Replies
View Related
Mar 23, 2013
Staff a has done excel spread sheet and safe under main folder at NT drive now sftaff b will access the staff a folder main and make changes how to stop this mess
View 1 Replies
View Related
Sep 25, 2012
I have domain controller windows server 2003 and 30 domain members, and everything was working fineYesterday our xp client complain that they cannot access shared folders and files in our domain controller server.After some time i found that i can access the shared folder by name (\nameserver) but i cannot access them by IP (\XX.XX.XX.XX)[CODE]
View 5 Replies
View Related
Apr 5, 2011
Today when I tried to access one network folder, I could not access it. I was getting the message "computer name\folder name is not accessible, you might not have permission to use this network resource".Then I went to the host computer and changed the permission to "everyone" but still I'm getting the same message.
View 1 Replies
View Related
Jan 3, 2011
I have a computer with windows 2003 server installed on it. There is one shared folder. The computer's name is SERVER. The shared folder's name is OFFICE.Whenever I type \SERVEROFFICE in a windows explorer window, I get a pop up window with a message that says that Windows does not find \SERVEROFFICE.I mean, I should be able to see the folder in this way because this OFFICE folder is shared and I am doing this from the same computer and not from another computer in the LAN.
View 3 Replies
View Related
