Strange Wifi / When Gaming Often Get A Lag Spike Every 10-20 Second?
Feb 23, 2012
My Wi-fi on my rig seems to have some odd problems. When I'm gaming i often get a lag spike every 10-20 second or so, and before I got the "Vista anti-lag" program I was also getting the enormous 60 second lag spike. I'm sure many Vista users recognize this problem. But here is the deal, the first kind of lag spikes completely disappear while talking on Skype! Which makes me wonder, what is it with Skype (only while talking) that removes the lag? Gaming with Skype makes all games run fluently without any spikes at all.
View 2 Replies
ADVERTISEMENT
Jan 30, 2013
we want to replace our 1242 AP's with the 1602 model and so far everything works like a charm. We have just noticed, that most of the clients which are connected on the 5GHz N radio, the web interface of the AP1602 shows his own host name instead of the clients host name.
For example:
Radio0-802.11N2.4GHz
SSID INTERN :
[code].....
The Host name of the 1602 is "AP-LABOR", so why it shows the own host name for the Dell E6420 Notebooks on the 5GHz radio and on some "NONE"?
View 1 Replies
View Related
Apr 13, 2013
I've a WRV210 Wireless-G VPN Router with RangeBooster, that logs this alert almost every time, "Packet type : 0 -- free socket buffer only".Also each time that some devices, like Android, are connected to the Wifi, the wifi starts a reboot and drop cycle.
Some extra context information, I've connected to the router a Cisco Gigabit switch and all the wired devices are connected to the switch, that could overload the router? Other point I've a Cisco VOIP gateway connected to the router and a few VPN's and firewall rules setup.
View 1 Replies
View Related
Jun 16, 2011
i get a bunch of lag when i play counterstrike, etc. In game, my ping is always tripling other players'. I know it isnt my computer because it is basically amazing. Im pretty sure it is my wifi because i'm in the top floor of my house and my router is in the basement. I'm using a usb wireless card. What can i do to get a better signal.
View 1 Replies
View Related
Jul 9, 2012
My router/modem is at one corner of the house and my computer is supposed to go in the other corner of the house. I am looking to play Battlefield 3, CS:GO, CoD:4, DayZ, and some other online games that require good connection to even do decent. I am going to be downloading different things and uploading videos to YouTube. I need a VERY FAST WiFi adapter that is comparable to wired connection, and remember, my computer will be all the way across the house.
View 6 Replies
View Related
Oct 16, 2012
I'm looking for a very strong wifi adapter for my gaming pc. My router and modem are both below me in my home so I can't run the Ethernet cord to my room.
View 7 Replies
View Related
Jan 8, 2011
I am with a reliable, well-supported local ISP. I have a brand new router, AND modem, both with the latest firmware/updates installed. I have tried resetting routers and modems, changing channels, moving the the position of my router for better signal. And yet still, inexplicably, my connection continues to be slow and choppy, and extremely unreliable. Greatly varying download speeds, and constant disconnecting. I have run out of things to try, short of calling in a technician. Is there ANYTHING I can try to do?
View 7 Replies
View Related
Jan 16, 2012
I have the E4200v1 and if I remember correctly I think its on 1.0.0.3 (cant remember because I went back to my wndr3700). I had not had any problems with it until yesterday when I returned to playing The Hunter (first time playing it on the E4200) and my girl hollered upstairs saying that she lost connection on the laptop. I reset the router and she reconnected and I went back to playing the game. 2 minutes later she hollers again. I stopped playing the game to try to figure out the wireless issue and everything looked normal. No more loss connections for the next few hours..........Until I started playing the game again...so I took it out of line and put the 3700 back in line and played the game for hours with no connection drop to the wireless. Is this a knows issue on the 4200? Are some setting changes necessary to game on it? btw I was playing the game wired and it didnt effect the connection at all?
View 6 Replies
View Related
Apr 21, 2012
I have a desktop PC with no wifi card that I want to use with a Clear Wifi hotspot. I have a WGA54AG Linksys Gaming Adapter and I want to use this with the desktop to access the wifi. I do not know how to reconfigure the gaming adapter for the CLear hotspot's security protocols.
View 1 Replies
View Related
Aug 12, 2012
In our ASA 5520 " tmatch compile thread" process is taking too much CPU while applying ACL for a moment . CPU goes to high and then back to normal .. The code is 8.2(5) . Is this a normal operation or abnormal .
View 5 Replies
View Related
Sep 19, 2011
I am running XP pro. I have checked thoroughly for viruses/malware/etc. and everything appears to be clean. I have up to date drivers for NIC's, have cleared all temp data, done basically everything that the first tier Time Warner Cable(my ISP) tech support people will tell you to do as they read from that frustrating script we're all too familiar with and have had to deal with time and time before, including resetting modem and router, bypassing router, etc. etc. et bloody cetera.Ran several pings to a variety of servers and noticed ping spikes every 10or so seconds into the 300-600 range from an average of about 20-30ms.
View 5 Replies
View Related
Oct 4, 2012
I have a T1 connection to one of my sites, I am running HREAP with 4 AP's. I have been noticing a spike in traffic from my AP's to the WLC. Even when no one is on the wireless. When you use encryption (DTLS) should this cause spikes on the T1 ?
View 2 Replies
View Related
Sep 12, 2011
Recently my connection went haywire , it constantly disconnect and spike when there is 2 computers connected to the rounter but it works fine with 1 computer.contacted the ISP , they sent someone down just to change the modem but the problem still occurs[CODE]
View 9 Replies
View Related
Aug 27, 2009
I recently puchased the WMP600N, connects great, I can browse the internet and even download without a problem.But when I try to play games such as world of warcraft, warcraft 3, (basically games that require immediate constant data transfers), I get 2-4 lag spikes every couple of minutes. As you might notice, this is a huge problem for many online games.
View 9 Replies
View Related
Jan 12, 2013
We have a Catalyst 3560G 24 port POE switch. It's been running fine for 1+ years. A few weeks ago we enabled SPAN on it to capture packets. Today, we had a random spike in CPU on the switch. Seems hardware swithing continued to work fine, but software based processes choked and effectively took down EIGRP, HSRP, etc. We collect syslogs from the router and we saw 2 crashes/reboots. Both showed the exact same error both times, with the same hex values. I **believe** the CPU usage dropped when a tech disconneted the SPAN port and it's state changed to down, but I'm not 100% sure.Could this indicate an IOS bug (I'm hoping it's not a hardware failure)? And, how to track this down to see if this could be related to SPAN? I've disabled SPAN for now.
View 3 Replies
View Related
Sep 2, 2012
I am having a cisco 7609-S router with the image sup-bootdisk:c7600rsp72043-ADVIPSERVICESK9-mz.122-33.SRD7.bin. Im getting above 95% cpu spike for 10 mins in every 2hrs of interval, after it has been integrated with Ciscoworks LMS version 3.2.1 and added this to HUM. In LMS the HUM polling has been configured for every 1hr to monitor the cpu and memory utilization.
I have gone through the below cisco document and I have configured all of the snmp-server view commands as illustrated in the below website.[URL] After configuring the same, now we are observing the cpu spike every 4 hrs or i would say 5 hrs... I have checked all the settings of ciscoworks LMS and there is absolutely no other jobs are running in the day time... The spike comes every 4 hrs.
View 3 Replies
View Related
Apr 22, 2013
The issue that I am having is that the network cable I have that going from my router to my desktop computer, seems to be flaky, at least it seems that way...When I try to use the network cable that goes into this desktop, into another computer(one that I know works), the connection status alternates between connecting, and no network cable detected, connecting...and no network cable connected, and so forth.it NEVER connects. When I plug the cable back into the desktop, it does the same thing for maybe a minute, but then eventually connects. However, every other computer, laptop, macbook, another desktop PC, that I have tried connecting using this same cable never connects.
View 5 Replies
View Related
Aug 13, 2011
My desktop PC has occasional hiccups in which I can't connect to any website (via any browser, I've tried Firefox, Chrome, Opera & IE) for short periods of time (usually ~1 minute) but all other Internet connectivity seems to be normal. (I can ping Google for instance, and I remain connected to Google Talk, but I can't load the Google website.)
I recently did a fresh install of XP Pro SP3 and am pretty confident that there is no malware running on the system. (I'm running Microsoft Security Essentials and Windows Firewall but I also did a Malware Bytes scan which uncovered nothing.) The desktop is connected wirelessly but I don't suspect an issue with the router because my laptop (via wireless) and my girlfriend's desktop (via wired) can surf the web just fine when my computer is experiencing issues.
I checked for proxies (both in the browser settings and in Windows settings) but everything appears to be setup correctly (that is, unproxied.) DNS is set to the proper DNS servers for my ISP (Cox) but I also tried switching to Google's DNS servers with no luck.
View 3 Replies
View Related
Jul 6, 2012
Basically I started disconnecting when I logged onto Blacklight Retribution after a recent game patch, after a few days the problem stopped and I was able to play again (with no changes to my computer) a few days later another patch was added and the problem occurred again, at first I thought it was a Blacklight specific problem (as this was my only installed game) however i installed a few other games (Kabold Online, Perfect World, Forsaken World, TF2, MW2 and C9) and I got the same problem on each of these games. I haven't been able to log onto a single Online game for more than 5 minutes, normally I'm disconnected at login, HOWEVER, my internet works completely fine in for everything else, i can browse the web, download game clients etc with no problem whatsoever.(Forgot to add, When i disconnect my LAN Cable mysteriously Unpluggs itself (according to computer) and a disable/enable in network manager reconnects it)
- Checked to see if drivers were up to date (they were)
- Rolled back NIC Driver (and put it back when this didn't work)
- Checked device manager for any problems with my NIC, (working as normal apparently)
- Tried setting my NIC to 100mbps Full Duplex
- Setting my power options to not interfere with NIC
- Had a DHCP error in my event logs so i set my gaming machine to a static IP
- Turned of UnUP, Turned on DMZ
- Turned off "Green Ethernet"
- I had other Errors in the form of a service stopping my NIC
- Phoned ISP, Everything is OK there end but they sent out a new router, but problem still occurs
- Noticed that a service was sending a stop control to my NIC, looked on forums for fixes and applied several of them
- Reformatted computer with old XP (switched from windows 7), updated, installed latest drivers etc and still same problem except now I don't get anything in event viewer when the problem occurs.
The only thing i haven't tried is replacing my NIC, but considering the internet works completely fine for everything but Online games I'm unsure how this could be the problem.
View 9 Replies
View Related
Dec 20, 2011
we have a production network that uses five SG300 switches that functions brilliantly most of the time. four of our switches run in layer 2 mode and the last switch runs in layer 3 as it is used to route our 7 vlans as well as routing traffic between our two gateways. the switches use the original firmware that shipped with the devices (v1 device) and will be upgraded within the next week. the problem that we have is that the network seems to stop routing for all of the hosts after a given time. the only way to fix this issue usually is to reboot the main layer 3 switch. the main layer 3 uses a default route to one of the gateways and a return route has been applied in the gateway. the only thing i can think is that somewhere one of the devices routing tables become full and the network stops responding.
View 2 Replies
View Related
Mar 24, 2011
I have an ASA 5520 with 2GByte RAM running Software Version 8.2(4)4.
As soon as I enable outside interface Gi0/0 I get the following error message on the console every now and then:
(set_exptime) Timer not a leaf 0x714644dc. Traceback: 0x805e4b3 0x8061b92 0x855ce33 0x85606e7 0x85634ee 0x8563f53 0x8564664 0x8564a12 0x85623a5 0x8063b63
mgd_timer_set_exptime: Not a leaf called from 0x855ce33
I have configured a second 5520 as failover mate and once I have activated the failover device and the configuration replication was finished this second device started the same tracebacks immediately.
View 4 Replies
View Related
Nov 13, 2011
I have searched the forums, and can see that I am not the only one with speed problems on this router. When I changed from a D-link dir-615 (yeah, no wonder I changed it ) my download speed dropped from 4-5 MB/s to 1,3 MB/s. I'm using a wired connection. Have tried disabling QoS in router settings, did a firmware upgrade, reset the router. You see, when I do speed tests on the internet I get 40-50 mbits download, 25-30 mbits upload. I have tried many different files to download, both torrents and through my browser.
View 2 Replies
View Related
Jan 10, 2011
we recently updated all of our WLC's to 7.098 and it all went smoothly, controllers rebooted and AP's updated their firmware and rebooted OK.One WLC (4402) which was working fine since the update now has no AP's associated. The AP's were all configured to run in HREAP mode and are on remote sites within our WAN. I have checked that all policies and ports are still open (none have changed anyway) but the AP's can not join with the contoller.The log from an AP trying to join with the WLC.
[Code] .....
The logs on WLC show as below.
*emWeb:
Jan 12 13:14:13.629: %AAA-5-AAA_AUTH_ADMIN_USER: aaa.c:1289 Authentication succeeded for admin user 'adann'*spamReceiveTask:
Jan 12 13:14:12.919: %LWAPP-6-CAPWAP_SUPP_VER: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:21:a0:81:a4:10 supporting CAPWAP*spamReceiveTask:
Jan 12 13:14:11.543: %LWAPP-6-CAPWAP_SUPP_VER: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:21:a0:81:8f:a0 supporting CAPWAP*spamReceiveTask:
[Code] ......
View 5 Replies
View Related
Aug 12, 2012
I keep getting log messages like the following on my router:[RV220W]Tue Aug 14 00:00:14 2012(GMT+0200) [RV220W][Kernel][KERNEL] BW_LIMIT_PKTS IN=LAN SRC=10.0.0.10 DST=173.194.35.134 PROTO=TCP SPT=1159 DPT=443,i.e. a large number of BW_LIMIT_PKTS messages regarding traffic from the LAN to the WAN destined to ports 53, 443 and 80 only. Is it related to QoS policies? What is the meaning of this message?
View 3 Replies
View Related
Mar 25, 2012
I'm having the following issue with a couple of 1231's.
Some overall config info first:
This is a small office with 2x Catalyst 2950 (24-port, no PoE) switches and 4 AP1231G (autonomous). The APs get PoE from a PWRINJ3 each. The injectors are powered by the AP power supplies. Injectors and power supplies are mounted in the patch closet.
The 2 switches are connected together over 4 ports (20-23 on each switch), these ports are set to 1Q Trunk mode.
The APs are connected to the switches, 2 to each switch, on port 1-2. These ports again are configured as 1Q Trunk.
APs are connected to the switch as follows:
[switch] <- patch cable-> [injector] <- patch cable -> [patch panel] <- static cabling -> [outlet] <- patch cable -> [AP]
All this has been working without problems for a number of years.
A few weeks back, AP2 did not restart after a power cut (everything else did). All LEDs are off, port on switch has no LEDs lit. I did not get around to investigating this furtehr until last week. I unmounted (failed) AP2, took it to the spot where (working) AP3 hangs, and plugged it to the cable of AP3. AP2 came to life immediately. I unplugged it and plugged AP3 back in, which restarted immediately.
So I suspect a power supply issue on AP2. I took the injector and power supply that fed AP2 out of the patch closet. When connecting AP2 directly to the power supply, it came to life immediately. So I figure the injector is defective.
On the same day, I notice AP4 is also dead (again all LEDs off, no idea how long, could have been that day or could have been a few days - it has definitely been working after the power cut that appeared to have killed AP2).
So I order 2 new PWRINJ3s and for good measure 2 new power supplies. Later that day, I took the injector and power supply that fed AP4 out of the patch closet. When I try this combination (AP4, injector4 and P/S4), and connect it to a different wall outlet (and therefore a different port -16 - on the switch) IT WORKS! Should have triggered questions, but did not immediately.
Last Thursday I got the new injectors and power supplies. So I take one of each, hook them upto AP2 at my desk, and AP2 starts up. So I mount new injector2 and new P/S2 in the patch closet, put AP2 back in its place, connect all the cables - NOTHING. AP2 does not start. The "power" LED on the injecvtor lights up green, the "device status" LED remains off. I take AP2, new injector2 and new P/S2 to my desk, hook them upto a wall outlet (connected to switch port 17). AP2 starts immediately.
Meanwhile AP3 has (also) stopped working (no LEDs on at all). As far as I can tell, it stopped working after I briefly disconnected (and reconnected) the patch cable between injector3 and the patch panel in the patch closet. The LEDs on switch port 1 are off.
I have since tried to power cycle both switches (took power off both, waited a while, poewerd both back on). No change.
PS: the APs ran firmware 12.3(8)-JA until recently. AP1, AP3 and AP4 were upgraded to 12.3(8)-JEE after the the power cut that took AP2 out. THis is when I found out AP2 was dead. AP2 was still on 12.3(8)-JA. It was upgraded to 12.3(8)-JEE last week when it was on direct power on my desk.
View 3 Replies
View Related
Sep 1, 2011
Our costumers has implemented 2 AIR-WLC4402-50-K9 with Software Release 7.0.98.0, the wireless infrastructure consist in 2 Root-Mesh-LAP and 8 Mesh connect over-the-air to deploy outdoor coverage.
All the LAP are Aironet 1520 Series Mesh Access Points with equipped with 3 antennas for 2.4GHz and 1 antenna for 5GHz (backhaul).For one year all seems to be ok, yesterday after a power outage of one Mesh-Root-LAP, 5 Mesh-Lap continues reload each 10-12 minutes, on the WLC Log you can see event like a reboot from AP Console, on the LAP console i can capture this event before the reload:
Log on LAP Mesh
%DOT11-6-GEN_ERROR: Error on Dot11Radio0 - Not Beaconing for too long - Current 0 Last 0
%SYS-5-RELOAD: Reload requested by Dot11 driver. Reload Reason:
Radio Not Beaconing for too long ....
LWAPP-5-CHANGED: CAPWAP changed state to DOWN
AP1780-Mesh uptime is 11 hours, 10 minutes
System returned to ROM by power spike
%DOT11-6-GEN_ERROR: Error on Dot11Radio0 - Not Beaconing for too long - Current 0 Last 0%SYS-5-RELOAD: Reload requested by Dot11 driver. Reload Reason:Radio Not Beaconing for too long ....*Sep 1 16:05:43.399: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN
What does it mean? That the beacon signal trasmitted from Root-Mesh-LAP cannot reach the Mesh-Lap and so the Mesh-LAP force a reload?Where we should search the cause? In the power instability or in a interference on the 5GHz radio interface?
On one of mesh Lap I found a strange reason for a releoad:AP1780-Mesh uptime is 11 hours, 10 minutesSystem returned to ROM by power spike
Log on WLC
Log System Time Trap
0 Thu Sep 1 17:31:11 2011 AP Disassociated. Base Radio MAC:00:22:be:41:33:00
1 Thu Sep 1 17:31:11 2011 AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:00:22:be:41:33:00 Cause=Heartbeat Timeout Status:NA
2 Thu Sep 1 17:31:11 2011 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:22:be:41:33:00 Cause=Heartbeat Timeout Status:NA
[Code]....
View 7 Replies
View Related
Oct 17, 2011
Last week and just yesterday, our switch SG200 50/50 logged an error like this:
%CDP-E-MALFORMED_TLV: CDP message from 88:43:e1:ab:66:f8 cached with illegal Appliance VLAN-ID TLV
At the time of the error, the SA520 router's LAN Port 1 where the SG200 Port 49 connected went down. (Light is OFF) So internet is down and other V LAN are disconnected. The MAC address on the log is the SA520 router. This happens 2x now and it needs for me to reboot both switch and router. and goes back again online.
SG200 50/50 Port Firmware 1.1.1.8
SA 520 Firmware (Primary/Sec):2.1.51/2.1.18
View 4 Replies
View Related
Jun 5, 2011
my MSFC2 sent this strange log message. %DATACORRUPTION-SP-1-DATAINCONSISTENCY: copy error, The error message decoder tool says: "NOT FOUND". The level is "alert".
View 8 Replies
View Related
Apr 5, 2011
I am monitoring my WRVS4400N with SNMP and create graphs by MRTG. Problem is that data about traffic are strange, very low. I have 50 MB line but max traffic shown on graphs is about 8000 bits per second. Also the "shape" of graph does not correspond with real traffic.
View 1 Replies
View Related
Dec 15, 2011
I have a VPN tunnel between two 892s. When either ISAKMP or IPSec SA lifetime expires tunnel stops processing traffic. However nothing is logged in the syslog. But when I enable debug crypto isakmp error and debug crypto ipsec error following entries appear:
ISAKMP:(0):Can't decrement IKE Call Admission Control stat outgoing_active since it's already 0
ISAKMP:(2041):R-U-THERE-ACK sequence number 0x63D809BB does not correspond to expected value 0x63D809BC
%CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSEC packet has invalid spi for destaddr=XX.XX.XX.XX, prot=50, spi=0x3560099E(895486366), srcaddr=YY.YY.YY.YY, input interface=GigabitEthernet0
ISAKMP:(2043): IPSec policy invalidated proposal with error 4
Is this a bug? IOS is Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.1(2)T2, RELEASE SOFTWARE (fc1)
View 2 Replies
View Related
Dec 28, 2011
OK I want to be able to play MMORPGS and other online games without any latency (or as little as possible). I have wireless 25mb internet in my house but the router is not in my room it is about 25 meters away in my parents room. I experience latency with my current set up while gaming online so I have decided to switch to wired. What is my best option for doing so? Running a wire through from the router to my room would be possible but I need to know if the length will effect performance and what type of Ethernet cable I would need (including estimated price). The other option is to move the router from that room to mine but im not familiar with how this would be done and what the costs would be
View 4 Replies
View Related
Jun 3, 2011
I'm having some (i lie, a LOT) of trouble trying to run LAN games between my roomates laptop and my laptop. He has a Compaq laptop, bout 4 years old or so, wireless capable and everything. I have a 2010 11" macbook air. No ethernet ports on mine, hence me wanting to set up a wireless LAN.I have tried creating a wireless network from my mac and my mates laptop can join it. but thats about it. cant set up local games or even see eachother on the server lists.
View 1 Replies
View Related
Aug 10, 2012
I recently upgraded to a new computer, it runs beautifully as expected however I encounter this problem with gaming. Whenever I hop in a game such as Dead Island, Arma 2 : CO (Day Z), Stalker : CoP, even Skyrim ( with SKSE, standard it ran okay. ) my connection will drop for my entire local network. I can still connect to my router, and it shows that I disconnect and reconnect with a new IP, from the logs it seems to be unprovoked. A few games will operate normally, however with Stalker, I play completely offline, and my connection still drops. It's not an instant disconnect, and it generally varies in time. However, when I'm not gaming, I get a steady connection with no issues, I get advertised speeds and can stream videos, and download perfectly fine. I've tried a USB wireless adapter to cross my motherboard off the list, and it encountered the same issue. But this problem just started occurring when I got the new computer.
View 9 Replies
View Related