I have a tp-link TL-WA5210G set as access point
SSID is Awlad Omran
security is WPA2
The problem is that mobiles (Iphone, Android, Symbian) can not connect to the access point, it just say connecting, but nothing happens.PC's can connect easily without any problem.i tried to change SSID and security and did a reset to the device but non of that worked.
I have two locations separated by less than 300 meters. In each zone I have an Access Point and in only one zone (let's call it Zone B), I have two IP Cameras. The idea is to connect these two cameras to my AP located at Zone B, and then, send this signal to my other AP to get this cameras in a LCD. First of all, I want to know in which mode should the APs be connected, I mean, in which "Operation Mode". I have three options:
-AP Client Router
-AP Router
-AP
And if I choose AP mode:
-AP:
+ Access Point
+ Client
+ WDS Bridge
+ Repeater
PD: The APs Model: TL-WA5210G
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
i cannot connect to the internet through wifi but if using cable is ok for me . i don't know why in my house only me (notebook and iphone) cannot connect to the wifi. i have install and reinstall the network driver but it still can't work. This problem is only occur in my house. When i take my notebook to outside, it can connect to others wifi. When i use my iphone to connect , it says that "It is unable to connect to [SSID]".
View 4 Replies View RelatedI have been using a TP-Link wifi adapter for last two months, It worked flawlessly till a couple of days ago. It just so happened that i turned on my computer and even though the wifi connections were available, when trying to connect this message keeps showing up " Windows was unable to connect to UoC WiFi". I have tried everything from making a new wifi connection to changing usb-ports
FYI I use the same wifi connection on my netbook and android, and they are working fine, so it's definitely not a problem with the ISP.
[code]....
I have installed a TP Link W8960N router and it is working fine using the ethernet cable. I have installed a realtek 11n USB adapter but cannot get it to connect to the router.
I uninstalled and reinstalled the software and whereas previously today it found my router (but wouldn't connect it says not associated) when I search now it doesnt even come up!
Windows device manager says the adpater is working properly
When installing router and adapter I set them both to WPA2 and used the same passkey. I am using Windows 7
Got a problem with the wifi,,because My ipod touch 4g can't connect to wifi,,my router is dlink how to fix that? my android phone can't access the wifi,,just my ipod that can't connect,,already use wep n unsecurebut still the same
View 1 Replies View Relatedi've just a D-Link DIR-600 router last month and i successfully installed it and its working great. Until 2 to days ago, my brother told me that he can't conlnect to the wi-fi. I said that its working just fine and told him to just reset his phone. And then, my sister also told me that she can't connect too. I checked their devices like iPhone 4S and iTouch and it says "Unable to join the network....... Also phones of my friends can't connect also. It was just working fine. I haven't changed anything on the router's configuration. I already reset the router, unplug then plug it and its still not working. The router is connected to my laptop and I can still browse the internet. Its the wireless connection that is not.
View 5 Replies View Relatedi bought the Dir 615 a few months ago so that my tenants (i have a triplex) can use the net. it's been great. I recently got a new blackberry bold 9700 and I can't connect it. It finds the router and saves it, but I can't connect. Even when I put in the WEP Key.
View 10 Replies View RelatedHow i can connect to my 5ghz wifi through my xbox ?
View 5 Replies View Relatedi want to conect my Dir 655 as Wifi to my LAN, i had a fortigate 50b as DHCP and Dlink Switch 10/100 as LAN Switch when i trie to conect the DIR 655 i disable the DHCP, UnP and Firewall. i put a local IP to DIR "192.168.0.221" and the fortigate has "192.168.0.23" then connect the dir to fortigate by LAN Port... when i trie to access via WIFI, dosent work..
[URL]
I had a TP-Link WR841N router which I replaced with a D-Link DIR-615 today. Before the replacement all my laptops, home desktop and my tablet would connect just fine. After the switch, all machines except the tablet connect to the Internet. My tablet shows that its connected to the router but I cannot access the router admin pages or the Internet. All settings on the DIR-615 are the same as the TP-Link one.
View 2 Replies View RelatedRegion : India
Model : TD-W8151N
Hardware Version : V3
Firmware Version : 120530
ISP : BSNL
Net is working smoothly from LAN, but no success on wifi. Over wi-fi, I can connect to router but cannot access net.
I cannot get the camera to connect to our wifi via WPA2-PSK:AES, which is what it runs. The network /SSID is visible in the setup, but it won't connect and get an ip. I see no error messages or any kind of information at all in the admin web page.I've upgraded to firmware 1.05
View 2 Replies View RelatedMy internet speeds are 45 Mbps DL and 1 Mbps UL and my various wireless connections (3 laptops in my household) were achieving speeds anywhere from 25-40 Mbps DL. My router started acting up and wasn't letting anyone connect via wifi so I did a factory reset and set it up the same way I did before (as best as I could), it started working fine again but now the speeds on all the devices that are connecting to at are capped at 18 Mbps. A simple speed test shows that no matter what they won't pass 18 Mbps, I am almost 100% certain this is the router and I was wondering what I might have done wrong or what is causing this.
View 5 Replies View Relatedhow do i connect two wifi routers to increase the range. One router is a cisco WRT120n and the other router is a d-link DIR524..
View 1 Replies View RelatedRegion : Canada
Model : TL-WR1043ND
Hardware Version : V1
I was wondering if it is possible to connect two routers through wireless and make them talk to each other. Here is why I need it, I currently Have 6 wireless IP Cameras going too 8. 2 are wired on one router in my house and the other 4 are wireless(with wired capabilities) Im going to wire the other 4 too a 2nd router so the cameras are always running and don't suffer any down time due to signal loss (happening a lot at the moment). How can I get Router B to talk to Router A, so I can look at all of the cameras from Laptop in my house which is closer to Router A.
My Router A is TL-WR1043ND, I'm also going to probably buy another one. How to configure it properly. So I can login to the cameras from my laptop.
Region : India
Model : TL-WR940N
Hardware Version : Not Clear
Firmware Version : 3.13.27 Build 121101 Rel.38183n
I have bought TP-Link TL-WR841N 300 mbps router. I have 20-25 wireless clients but only 15 wireless clients are able to connect to the router. Is there the limitation on numbers of wireless clients can connect to the router?
Region : Canada
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120608
ISP : Distributel
I've just installed this router today, connected physically 2 PCs, a PS3 and a VoIP and everything works fine !
The problem is with the WIFI connection ! my devices see the WIFI network, they connect, but I cannot connect to the internet ...
What settings Should I turn on/off or any config I should tweak ?
I have a TP-Link TL-WN723 USB WiFi adapter attached to my laptop, which runs WinXP Service Pack 3. It successfully detdcts the WiFi provided by my Edimax BR62-04Wg router, but when I try to connect, it cannot obtain an IP address and cannot connect to the network.
- The very same WiFi adapter can connect to other routers without any problem
- Any other device can connect to the very same network provided by my router without any problem
- Using the WiFi adapter with other computers does not work
Thus, it seems that the problem is somewhere between this specific router and WiFi adapter. Here is an interesting detail though:If I try connecting to my WiFi while a LAN cable from the router is plugged into my computer, the wireless connection establishes too. Even if I later unplug the LAN cable, the wireless connection continues to work. But it won't establish the connection without the cable plugged in.Here's what I've already know/tried:
- Rebooting the PC
- Re-installing the WiFi adapter's drivers
- All drivers and firmwares are the newest available
- Re-starting and reconfiguring the router
- Using the Windows client for wireless networking and the client included on the WiFi adapter's CD
- Changing the router's connection type to any available option: Access Point, Station Ad-hoc, AP Bridge WDS
None of these had any effect except for one:
- When I changed the router's connection type to Station Ad-hoc, I could connect wirelessly even without the LAN cable plugged in, and I had Internet access. However, in this case, other devices, such as smartphones could not detect the WiFi connection.
I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
I have a DIR-655 that I have been using for a while (b1 revision). and suddenly I noticed my wifi speed fluctuates constantly. My lenovo Y580 sees speed drop to 130 immediately and then it can slowly progress to 1 Mbps until the hardware is all rebooted. Same happens to my Nexus 7, Dell XPS M1530 and to my roku. I have updated to 2.07 (since 2.10 is advised to avoid). And I have attempted changing channels or factory refresh.What Firmware version is currently loaded? 2.07What region are you located?
What ISP Service do you have? Cable or DSL? Cable (link speed independent of internet speed)What ISP Modem do you have? Stand Alone or built in router? Separate Motorola ((link speed independent of modem)What ISP Modem make and model do you have? Does not matter, router issue.If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. Not bridged
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic. Independent of issue, not a factor
Turn off all devices accept for one wired PC while testing. Wired works perfect.Check cable between Modem and Router, swap out to be sure. Cat6 is recommended. Wireless issue.
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
View 1 Replies View RelatedAny way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies View RelatedRegion : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :
After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".
Today I bought a new TP-Link Wireless Router in China, (TL-WR845N), and set it up with followed instructions with the router IP setup too with 192.168.1.1. Before, it was only LAN and now I bought the wireless to use my iPhone with it. Now LAN wont work at all on either of my computers. I've uninstalled and reinstalled the Ethernet drivers, rebooted/checked the modem and router, but still couldn't get it to work. My Windows XP shows connected, but Chrome says unable to connect to the Internet.
I've checked TCP/IP settings, made it automatic, still nothing.
I have a desktop and DIR-655 router upstairs [small house]. Downstairs I have a laptop and a new Panasonic Viera tv with built in WiFi. Panasonic's instructions are simple and suggest a click on the remote and the tv will be recognized. It has not happened. Error message states no connection to the router. My laptop is 5ft away and the signal is strong.Do I need to configure the router to pickup a new piece of equipment? If so how?
View 3 Replies View RelatedI've been having strange problems since I got my DIR 655. Set it up, run through factory wizards, and everything works great for a little while. Maybe week, or as soon as a few minutes I'll lose internet connectivity over wifi. Connection is 100% to the router. I can still log into the router via, but not get out of it to the net. If I plug in my pc via the wired ports everything is still great. Factory reset, and set it up again and It might bee good for a little while. Occasionally I'll get a warning on my PC that there is an IP address conflict when its been on for a long time. I've gone back to my WRT-54g since it still works perfectly. I just want my N bandwidth back. I've gone through and toggled just about every setting that I can think of. Advanced DNS is off.
View 1 Replies View RelatedI ordered this router from walmart...My questions are before I even open it up when i receive it are..Will it be a huge pain to hook my vonage modem up and not have problems with calls?...I really got it also so that i can use a wifi device like nook to access their store...Also i was thinking of getting a roku player from netflix for my little 22 inch hdtv.
View 2 Replies View RelatedI have a TP-Link TL-WN822N wireless usb adapter. It works well, as far as getting a signal.But whenever I use my earbuds I can hear static. When I unplug the adapter, I no longer hear static. It sounds like the static is the sound of data transfer, because the sound get busier and louder when I'm downloading something.I have the latest driver installed.
View 5 Replies View RelatedI find that within my apt I can only get about 32% signal from my shaw Wi-Fi router. They don't support what I want to do.. adding my d-link router to boost or repeat the signal.
View 1 Replies View RelatedRecently i brought D-Link DIR-524 wifi router. somehow i am able to connect to internet. But i am dont know how to block it for other computers. i am new to networking. How to configure the D-Link DIR-524 wifi router.
View 7 Replies View RelatedI have a 10 Mbps Internet connection, if I connect my PC directly to my modem I get the 10Mbps sometimes more, also I get them if I connect my modem to my switch and from the switch the computer.The problem comes when I connect my modem to the D-link DIR-600 router and from the RJ-45 connectors of the D-link I connect my computer, i get 0.80, 1.5 max. and my wifi devices gets the 10mbps. What is happening with the D-link RJ-45 slots or im missing something in the configuration?
View 1 Replies View Related
