I have a desktop PC where the only internet connection is via a 'USB mobile broadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN and dongle connections. My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless Network Adapter" and "Realtek PCIe FE Family Controller" are both showing without any ?'s etc
Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.
Currently I am hosting a 7 day mountain retreat, for about 90+ people. Clearly they are dependent on the internet teet as am I I am trying very hard to provide internet to our friends, but I just can't seem to figure it out I have a Mobile Broadband Router (MBBR) which limits connected devices to 6, so I figured that if connect a home router with wifi (WIFI) that allows 253 connections problem solved right? So I put a short LAN cable from the LAN port on the MBBR to the WAN port on the WIFI and presto! The WIFI gets a IP address, but does not allow other users of the WIFI to get internet. I've even killed all security on the WIFI and put the WIFIs IP in the DMZ on the MBBR. I noticed the DNS was the same as the gateway on the WIFI, so I changed that to the DNS on the MBBR still nothing.
PS Yes I have a connection on the MBBR I am on it now.Connecting the LAN cable from the MBBRs LAN to the WIFIs LAN extends the range, and grants internet to the WIFI users... but uses the MBBRs DHCP to give IP addresses, which limits to 6.I guess the goal here is bypass the limitation of the MBBR by using the WIFIs DHCP to issue IPs?
I need to change providers from Verizon to AT&T. This modem came with the AT&T Sim card installed in my notebook. The software (Dell Mobile Broadband Utility Help) says " Choose Network Selection from the Settings Menu. Select AT&T and click Load." Unfortunately, Network selection is not an option.
How do I do it? This modem is compatible with Verizon, AT&T and Sprint networks.
i had broadband connection to the computer having windows xp os and i have a nokia c6 mobile having wifi and 3g.is it possible to get connected with wifi using broadband
Is there a way to turn my old PC (P4 3.0GHz, 1GB RAM, 40GB HDD) into a Mobile Broadband Router using my Verizon 4G USB device? (like a CardlePoint router)I am searching some of the "PC to Router" software titles, but I am unable to find my type of setup: (support USB 4G as internet source)DD-WRT, ClearOS, ZeroShell, RouterOS, Untangle, etc.
-use my Verizon USB 4G device as my internet source -have a single NIC on my PC router plugged into a switch -all my other PCs would be plugged into the same switch
I am looking for a 3G mobile broadband wireless router WITH dual band frequencies and 4 gigabyte ports OR could the DAP-1350 be connected to my DIR 655 that at least has the gigabyte ethernet ports? (Would I connect it to the Internet port or to one of the Ethernet ports and turn the 655 into an access point?)
I have a sprint 250u Sierra USB for my Internet. There isn't anything else available where I live, and don't even get me started on satellite Internet .What I'd like to do is have an Internet connection with a wireless router with dual band frequencies and at least 4 gigabyte switch ports to share a NAS device that I'm going to buy in the near future along with a printer and surveillance camera. That way I don't have to have multiple wireless devices to connect to for what I want to be able to do.
I want to share mobile broadband with another computer.One desktop running on windows7 and connected to wireless router netgear wgt624 v3 via ethernet cable. The other laptop is running on windows7 and has wireless card. Both computers are connected wirelessly via router on private network within workgroup and can share files between each other. The mobile broadband dongle is connected to desktop pc and desktop is running the internet Now I want the desktop pc which is running internet by wireless dongle to share that internet with laptop via wireless router. I have tried setting is up but couldn't do that. When I connect the dongle to desktop pc it use the same IP address 192.168.1.1 which is already used by wireless router. Tried to configure different IP in router but didn't work.
I've got an Optus (in Australia, so 3G mobile broadband is all that matters I would think) that I'm trying to connect to a Netgear WGR614v9 wireless router. So the 3g mobile plugs into usb on computer; the router to the ethernet card on computer.
I know; I could buy one that has it in one package, but we're throwing the router out from work anyway. If this works my daughter will be thrilled with her iPod more is all :)
I've got the mobile broadband on, and plugged in the router and Windows 7 makes a second network connection automatically for the router, though with no internet access, and the setup wizard in the router claims to have no access to the internet. (though clearly I'm posting...lol).
We can see the Wireless signals on devices and can connect to the router but then the devices say no internet access when you actually try to access the web, like the router wizard does. and yet, we are online
Can I use 3G dongle with wifi router using USB to RJ 45 converter,how to config the same...Also, using same converter; can I convert/share /use my external USB storage device over wifi router...
A Seimens Gigaset SE568 Wireless Router connected to a DSL Line and broadcasting a WIFI signal throughout my house. I receive this WIFI internet connection on my laptops using their respective WIFI adapters, and on my desktop using a GASKY GS-28USB Wireless USB Adapter, and use this internet connection simultaneously in both desktops and laptops.Now, I am shifing to a new 3G USB Mobile Broadband service:
Where I can directly connect the 3G USB Mobile Broadband Stick to my desktop or my laptop and use the internet directly, but not all at once through my router as was previously configured.Is there a way using the existing hardware, can I configure my desktop to share this internet connection and broadcast from the GASKY GS-28USB Wireless Lan Card to the Seimens Gigaset SE568 router and then throughout my house for simultaneous access, or directly share the internet through the GASKY adapter itself, or is there some other configuration I can use ?My Desktop has Windows 7 installed as an operating system.
I have idea netsetter(huawei dongle e1732) and i had unlocked it and now i am using tata docomo sim card on it.now i want to use this dongle in wifi router 3g usb modems.but i am not sure that the dongle can work on router modems or not?i wanna make hotspot at home using dongle in router modem.
I bought the Telkom wi-fi router with A 3G dongle. If I plug the 3G dongle directly into a laptop it picks up immediately but when I plug it into the router it doesn't pick it up at all.
I would like to connect my USB WIFI dongle directly to my wired router, this would enable me to have wifi access without having my PC switched on all the time, is this possible and if so what kind of adapter do I need? I think I need USB A Female to Ethernet RJ45 Male Router Adapter.
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
Recently got a mobile broadband dongle for my laptop, shows 7.2 Mbps speed in the status window and under activity the received bytes is shooting up, as I write this is has went from 25,000,000 to 35,000,000, that's about 10 mg for a few seconds, it does this even when I have no page open, I can't see anything in task manager, I don't know why it's downloading so fast when there's nothing there, also because of this it is slowing my browsing down,
I just got my wireless broadband and can't connect with my dell inspiron 530.It first told me that 'this computer does not have a wireless network adaptor installed and configured'
Then I tried to connect another way, and it was asking me for user name and password. I put in what was on the back of the wireless adaptor - the name, and the wifi key number as the password. It looked like it was trying to connect but didn't.
Well i am currently using a BSNL DNA A211-1 wifi modem-cum-router with a wireline inbetween my PC (win7 ultm) & the router, so as to connect to the internet. i use the wifi feature of my router to connect my samsung gts5570 wifi enabled phone as well as a few other wifi enabled devices, to use internet on them. now i was thinking whether i can connect my desktop pc to my mobile phone using this wifi router somehow? how can that be done since there is already 2 different network that exist between my pc & router thru wireline & my mobile & the router thru wifi, all i need is a way to sync these to networks into one, so that my pc & my mobile use internet & at the same time they connect to each other as well.
I'm living in Australia for a few months and my accommodation does not have a phone line, so I've been using mobile broadband dongles instead. This worked fine until recently, when I abruptly became unable to access the internet. The laptop recognises the dongle and seems to connect, but the download/upload speeds are at a constant zero bytes per second (I have tried to ping Google while 'connected' but received no response). I have tried two dongles from Dodo and one from Telstra, with the same results. Initially, I assumed that this was simply due to signal strength, but each of the three dongles I have tested work fine on another laptop in the same location (I'm using one of them to post this). I have also tried using the dongles with my laptop in other locations, including the city centre, but with no success.
Also, I seem to be unable to connect to any wireless networks (e.g. McDonalds wifi) - the laptop detects the network ok, and seems to be connected, but I am unable to access any web pages etc. In the Network and Sharing Centre, the laptop is connected with the wifi network, but the wifi network does not seem to be connected to the internet. I'm unsure if this is related to the above problem, however.Like I say, everything seems to have been working fine up until about a week agoIf
I have an XPS M1330 with an internal Dell Mobile Broadband Mini-card 5720 VZW for Verizon. The Dell Mobile Broadband Utility (DMBCU) now reports an APPCRASH upon launch only when Windows Internet Explorer 8 (IE8) is installed. I'm certain it is due to IE8 and probably the required MeadCo Zeepe add-ins that are required for dmbcu.exe functionality. Upon uninstallation of IE8, the dmbcu.exe works flawlessly.
Is there any update or plan to update the DMBCU for the 5720 VZW minicard?
Is there or will there be a Windows 8 driver for the Dell 5540 mobile broadband HSPA card?Now that Windows 8 has RTM'd I was expecting a few more drivers to be released but this one currently doesn't work on my fairly new XPS.
Is there an alternative driver from the chipset manufacturer I can try? I'm happy to try out a beta driver if available.
I HAVE A 3 YEAR OLD DELL STUDIm O 1747 (YEP IT WAYS A TON), AND AFTER I start up the ole computer and Icon comes on a bit later in the desktop tray that says "mobile broad band not found. I am quite sure it came with the Original Operating system (windows 7). and I have been considering reinstalling the operating system provided by Dell which I still have for Windows 7....Which is a hasslel the last resort...I tried doing a recovery on the system but I will be damed if I can remember the password even though the computer boots up and I get my display window every time..
I have dell xps l501x with embedded 5620 mobile broadband mini card. Vz access manager says that device is disabled. How can I fix. Or in device bad and have to replace?
I have a E6410, install sim card, load and start Mobile Broadband Manager and it say me an error "Mobile Broadband Device not found"
I already download and install Wirless Mobile Broadband Drivers, both of them (5620 and 5540 mini card) i realy dont understand how to determine which of them installed in my laptop.