I need to change providers from Verizon to AT&T. This modem came with the AT&T Sim card installed in my notebook. The software (Dell Mobile Broadband Utility Help) says " Choose Network Selection from the Settings Menu. Select AT&T and click Load." Unfortunately, Network selection is not an option.
How do I do it? This modem is compatible with Verizon, AT&T and Sprint networks.
I have an XPS M1330 with an internal Dell Mobile Broadband Mini-card 5720 VZW for Verizon. The Dell Mobile Broadband Utility (DMBCU) now reports an APPCRASH upon launch only when Windows Internet Explorer 8 (IE8) is installed. I'm certain it is due to IE8 and probably the required MeadCo Zeepe add-ins that are required for dmbcu.exe functionality. Upon uninstallation of IE8, the dmbcu.exe works flawlessly.
Is there any update or plan to update the DMBCU for the 5720 VZW minicard?
I have just ordered a Dell Wireless 5540 Utility. I would like instructions as to how I am to insert the card without voiding the warranty.
View 5 Replies View RelatedIs there or will there be a Windows 8 driver for the Dell 5540 mobile broadband HSPA card?Now that Windows 8 has RTM'd I was expecting a few more drivers to be released but this one currently doesn't work on my fairly new XPS.
Is there an alternative driver from the chipset manufacturer I can try? I'm happy to try out a beta driver if available.
I HAVE A 3 YEAR OLD DELL STUDIm O 1747 (YEP IT WAYS A TON), AND AFTER I start up the ole computer and Icon comes on a bit later in the desktop tray that says "mobile broad band not found. I am quite sure it came with the Original Operating system (windows 7). and I have been considering reinstalling the operating system provided by Dell which I still have for Windows 7....Which is a hasslel the last resort...I tried doing a recovery on the system but I will be damed if I can remember the password even though the computer boots up and I get my display window every time..
View 4 Replies View RelatedI have a Sim card slot after removing battery in my dell inspiron 1525 for mobile broad band. But i don't know how to use it.
View 1 Replies View RelatedI have dell xps l501x with embedded 5620 mobile broadband mini card. Vz access manager says that device is disabled. How can I fix. Or in device bad and have to replace?
View 4 Replies View RelatedI recently purchased a WAN Broadband card for my Alienware M14x.
Wireless 5620 Multi-Mode Gobi Mobile Broadband Mini-Card for Select Dell Systems
Dell Part# : 313-9379
My Laptop runs Windows 8. I cannot seem to find a suitable driver. Does a Windows 8 driver exists for this card
I have a E6410, install sim card, load and start Mobile Broadband Manager and it say me an error "Mobile Broadband Device not found"
I already download and install Wirless Mobile Broadband Drivers, both of them (5620 and 5540 mini card) i realy dont understand how to determine which of them installed in my laptop.
I currently have a 4 year old Dell XPS M1530 that recently died due to an rough impact. About to buy a new Dell XPS 15 and was wondering if I can easily swap my Sprint Mobile Broadband Card between the two. And if so would I only need to download a new driver for it? I am currently grandfathered in with Unlimited Data on my current card plan and I would hate to have to get a new one requiring a new contract with Limited Data.
View 1 Replies View RelatedHow may I find out if on my XPS 17 702X I have installed a mobile broadband device?
Tried on Device Manager and nothing found but when I checked Radio Control Options via Wiindows Mobility Center, on the Radio Control Options
the Mobile Broadband option is mentioned but without possibility of thicking it! Also when I go via Dell Mobile Broadband Manager The msg "The mobile broadband device is not found.
can i set up my kindle with t mobile broadband dongle
View 1 Replies View RelatedIs there a way to turn my old PC (P4 3.0GHz, 1GB RAM, 40GB HDD) into a Mobile Broadband Router using my Verizon 4G USB device? (like a CardlePoint router)I am searching some of the "PC to Router" software titles, but I am unable to find my type of setup: (support USB 4G as internet source)DD-WRT, ClearOS, ZeroShell, RouterOS, Untangle, etc.
-use my Verizon USB 4G device as my internet source
-have a single NIC on my PC router plugged into a switch
-all my other PCs would be plugged into the same switch
Recently got a mobile broadband dongle for my laptop, shows 7.2 Mbps speed in the status window and under activity the received bytes is shooting up, as I write this is has went from 25,000,000 to 35,000,000, that's about 10 mg for a few seconds, it does this even when I have no page open, I can't see anything in task manager, I don't know why it's downloading so fast when there's nothing there, also because of this it is slowing my browsing down,
View 3 Replies View RelatedI just got my wireless broadband and can't connect with my dell inspiron 530.It first told me that 'this computer does not have a wireless network adaptor installed and configured'
Then I tried to connect another way, and it was asking me for user name and password. I put in what was on the back of the wireless adaptor - the name, and the wifi key number as the password. It looked like it was trying to connect but didn't.
I have a desktop PC where the only internet connection is via a 'USB mobile broadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN and dongle connections. My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless Network Adapter" and "Realtek PCIe FE Family Controller" are both showing without any ?'s etc
Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.
I have a 3 Network USB Dongle which is the only thing that will work for receiving broadband at a remote location.
Also have a Kasda WiFi router It has a USB port on it (whether it is connected to anything inside?)
We want to send wifi around the house with the 3 Network broadband - can we utilize this router or have to get something else
i had broadband connection to the computer having windows xp os and i have a nokia c6 mobile having wifi and 3g.is it possible to get connected with wifi using broadband
View 1 Replies View RelatedI am looking for a 3G mobile broadband wireless router WITH dual band frequencies and 4 gigabyte ports OR could the DAP-1350 be connected to my DIR 655 that at least has the gigabyte ethernet ports? (Would I connect it to the Internet port or to one of the Ethernet ports and turn the 655 into an access point?)
I have a sprint 250u Sierra USB for my Internet. There isn't anything else available where I live, and don't even get me started on satellite Internet .What I'd like to do is have an Internet connection with a wireless router with dual band frequencies and at least 4 gigabyte switch ports to share a NAS device that I'm going to buy in the near future along with a printer and surveillance camera. That way I don't have to have multiple wireless devices to connect to for what I want to be able to do.
Currently I am hosting a 7 day mountain retreat, for about 90+ people. Clearly they are dependent on the internet teet as am I I am trying very hard to provide internet to our friends, but I just can't seem to figure it out I have a Mobile Broadband Router (MBBR) which limits connected devices to 6, so I figured that if connect a home router with wifi (WIFI) that allows 253 connections problem solved right? So I put a short LAN cable from the LAN port on the MBBR to the WAN port on the WIFI and presto! The WIFI gets a IP address, but does not allow other users of the WIFI to get internet. I've even killed all security on the WIFI and put the WIFIs IP in the DMZ on the MBBR. I noticed the DNS was the same as the gateway on the WIFI, so I changed that to the DNS on the MBBR still nothing.
PS Yes I have a connection on the MBBR I am on it now.Connecting the LAN cable from the MBBRs LAN to the WIFIs LAN extends the range, and grants internet to the WIFI users... but uses the MBBRs DHCP to give IP addresses, which limits to 6.I guess the goal here is bypass the limitation of the MBBR by using the WIFIs DHCP to issue IPs?
I'm living in Australia for a few months and my accommodation does not have a phone line, so I've been using mobile broadband dongles instead. This worked fine until recently, when I abruptly became unable to access the internet. The laptop recognises the dongle and seems to connect, but the download/upload speeds are at a constant zero bytes per second (I have tried to ping Google while 'connected' but received no response). I have tried two dongles from Dodo and one from Telstra, with the same results. Initially, I assumed that this was simply due to signal strength, but each of the three dongles I have tested work fine on another laptop in the same location (I'm using one of them to post this). I have also tried using the dongles with my laptop in other locations, including the city centre, but with no success.
Also, I seem to be unable to connect to any wireless networks (e.g. McDonalds wifi) - the laptop detects the network ok, and seems to be connected, but I am unable to access any web pages etc. In the Network and Sharing Centre, the laptop is connected with the wifi network, but the wifi network does not seem to be connected to the internet. I'm unsure if this is related to the above problem, however.Like I say, everything seems to have been working fine up until about a week agoIf
My T-mobile dongle works in safe mode but not in normal mode.
View 1 Replies View RelatedI want to share mobile broadband with another computer.One desktop running on windows7 and connected to wireless router netgear wgt624 v3 via ethernet cable. The other laptop is running on windows7 and has wireless card. Both computers are connected wirelessly via router on private network within workgroup and can share files between each other. The mobile broadband dongle is connected to desktop pc and desktop is running the internet Now I want the desktop pc which is running internet by wireless dongle to share that internet with laptop via wireless router. I have tried setting is up but couldn't do that. When I connect the dongle to desktop pc it use the same IP address 192.168.1.1 which is already used by wireless router. Tried to configure different IP in router but didn't work.
View 1 Replies View RelatedHow can i connect my wifi mobile with my wireline broadband which i am using on my pc
View 3 Replies View Relatedi can be prompted or connected through my mobile broadband connection but i can't access to the internet,what's wrong?...is it some settings?
View 1 Replies View RelatedI've got an Optus (in Australia, so 3G mobile broadband is all that matters I would think) that I'm trying to connect to a Netgear WGR614v9 wireless router. So the 3g mobile plugs into usb on computer; the router to the ethernet card on computer.
I know; I could buy one that has it in one package, but we're throwing the router out from work anyway. If this works my daughter will be thrilled with her iPod more is all :)
I've got the mobile broadband on, and plugged in the router and Windows 7 makes a second network connection automatically for the router, though with no internet access, and the setup wizard in the router claims to have no access to the internet. (though clearly I'm posting...lol).
We can see the Wireless signals on devices and can connect to the router but then the devices say no internet access when you actually try to access the web, like the router wizard does. and yet, we are online
I bought a new Toshiba Satellite C660 laptop with Windows 7 on Sept 1st, and had no problems at first with the mobile broadband. However, on Monday 13th I noticed massive spikes in the data usage. After browsing the internet for around an hour I decided to check my usage randomly, and it was at 350mb!Since then, there's times when I don't even have my browser open and in the space of 5 minutes it will reach 150mb of usage. There's also times when it works absolutely perfectly for hours on end (including today, where it was working fine up until around an hour ago!) I phoned the mobile broadband company twice last week, the first time the person told me that it was a computer issue and to go to an IT repair place.
So after sending him screencaps of Windows task manager processes/applications/network he can't see anything that could be doing it. He advised me to do a full antivirus scan, and full malwarebytes and ad aware scans and they've all come up clean.The second time I phoned the broadband company, they told me that there were some wrong settings, and that they've been changed now but if I have any more problems to ring customer care again.So after seeing an offer with a different mobile broadband provider, I decided to buy a new broadband stick and change networks in hoping that would solve the problem.... it didn't.
So there's definitely something about the new laptop that's causing the data usage to spike I don't use any torrent programs, and haven't been watching youtube videos constantly or trying to stream online, like I said there's been times where I don't even have Google Chrome open and it's using up all my data! I don't use Skype or anything like that either (to be honest I have barely any programs on this new laptop)I've turned off all the automatic updates for as many programs as I think can have them. Ii's definitely improved a bit though, but there are still times (like around an hour ago) that the data usage starts spiking randomly.
A Seimens Gigaset SE568 Wireless Router connected to a DSL Line and broadcasting a WIFI signal throughout my house. I receive this WIFI internet connection on my laptops using their respective WIFI adapters, and on my desktop using a GASKY GS-28USB Wireless USB Adapter, and use this internet connection simultaneously in both desktops and laptops.Now, I am shifing to a new 3G USB Mobile Broadband service:
Where I can directly connect the 3G USB Mobile Broadband Stick to my desktop or my laptop and use the internet directly, but not all at once through my router as was previously configured.Is there a way using the existing hardware, can I configure my desktop to share this internet connection and broadcast from the GASKY GS-28USB Wireless Lan Card to the Seimens Gigaset SE568 router and then throughout my house for simultaneous access, or directly share the internet through the GASKY adapter itself, or is there some other configuration I can use ?My Desktop has Windows 7 installed as an operating system.
I'm using Fedora 15, in GNOME Shell, my mobile broadband connection was working absolutely fine, until I set the connection type to Connect Automatically using nm-connection-manager. Now, when I start the Fedora, the Top panel network icon shows red exclamation symbol and when I click it, instead of showing me available networks' list, it shows only "Network Settings", and when I open it, it shows GNOME 3's new Network Manager app, and it pops out the dialog saying that, "Current network settings service is incompatible with this version". And after a few seconds of log in, the shell freezes and all I can do is log out using Ctrl+Alt+BackSpace.
I'm facing this problem since I opened old network manager app using nm-connection-manager in the run dialog, and editing my connection to connect automatically.
After logging in to the shell I somehow managed to delete that connection from the same app and created a new one, but the problem still exists. How can I delete all network preferences (by deleting its configuration files from my home directory or something like that) and reset the GNOME 3's network manager to its default state?
The client currently has DAS solution integrates with cisco ap1200 which has been eos. As per my knowledge DAS mobile access 2000 doesn't support. 802.11n, is this correct? We are planning to separate the dad environment with cisco. Basically positioning new 3600 n indoor AP to replace existing eos 1200. What are the pro and cons of separating two brands and solutions? Other cabling.The client having coverage issue and adding an amplifier and cable loss may add more issues to existing environment.
Also, based on experience 80211n AP are required is higher density vs 1200.What are your thoughts or best design option to separate das from WLAN environment?
is there any dell wwan card that is 4G capable and integrable in a latitude E6400 laptop like a wwan 5530 card?
Or the only way to get 4G for E6400 is a USB 4G stick?
Where will I be able to download the drivers for this router? Dell doesn't seem to support this router anymore!
View 6 Replies View RelatedI have 29 Latitude C640 laptops. they all have the Dell True Mobile 1150 (Internal Wireless) I need to be able to use WPA-PSK w/(TKIP) encryption. So I entered the express service tag and found a recent driver which says it supports WPA. I downloaded it, installed it, and it does allow me to enter WPA-PSK mode and allows me to input the key but it will not connect. I spend almost two hours on the phone with a Dell Wireless Support Agent, who finally tried to convince me that 802.11b does not support WPA. (ACK---_) When I asked why my service tag, input on the support page, takes me to a network driver for the TM 1150, which states the reason for the driver update is (Support of WPA in Windows XP), she placed me on silent hold, then elevated volume music hold, then transferred me to General Hardware support.... How to be successful in utilizing the True Mobile 1150 (aka Orinoco) and WPA.
View 5 Replies View Related