I'm using a Windows 7 ASUS laptop, with a Netgear RangeMax Wireless Router model WPN824v2. I can connect to the internet when I am connected directly to the router, but as soon as I take the ethernet cable out, my computer can't detect anything. On device manager, under the network adapter tab, there are two items.Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20) Atheros AR9002WB-1NG Wireless Network Adapter.The wireless network adapter has a small yellow exclamation mark on its icon."Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)" [code]
Im trying to connect my Windows 7 professional 64-bit Pc to my Windows 7 64-bit OEM-version laptop. The Pc has a gigabyte motherboard, and the laptop is an ASUS X52JT.But connecting them doesn't work.When i connected the above-mentioned laptop with another laptop, it worked. But not when i try to connect it to my PC. They don't show up on 'Network'.So i tried even making an ad-hoc network and connect them both to it, but they didn't show up then either .. I have made sure that "File sharing" is enabled on both computers.
My laptop normally always works on the wireless network, but every now and then its randomly stopped working and said "identifying network" followed by "could not identify network, unidentified network." When i would troubleshoot it would say stuff about the default gateway and not a valid ip address. THis was fine because it would always just start working on its own in a day or so. However these arnt coming up when i do the troubleshoot this time, and its been over a week and no improvement.Im obviously writing this from the desktop. and the stats below are the desktop stats.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz, Intel64 Family 6 Model 26 Stepping 5 Processor Count: 8 RAM: 6135 Mb Graphics Card: NVIDIA GeForce GTX 465, 1024 Mb Hard Drives: C: Total - 953766 MB, Free - 437284 MB; Motherboard: MSI, MSI X58 Pro-E (MS-7522), 3.0, To be filled by O.E.M. Antivirus: Trend Micro Titanium Maximum Security 2012, Updated: Yes, On-Demand Scanner: Enabled
my specs are:[CODE]After i re-installed win 7 home premium 64 bit edition i've managed to install successfully the Realtek PCIe GBE driver but when i connect the router directly to the laptop i got no internet.Meanwhile windows did not recognized the WiFi network card Atheros 9285.i tried diffrent driver and though it had been installed, in Device manager i only see "Bluetooth generic module" and in the "change adapter setting" i only have Local Area Connection.
I have two ASUS UL80 laptops and trying to copy files from one to another. I also have a Linksys router with WiFI on.
The speed of a file transfer via router + LAN cable (or only the LAN cable) is about 600KB/s. I tried to turn off firewalls on both PC's, but it increases the speed by only 100KB/s.
The other day i was on my mums laptop (ASUS X5DIJ) at her house all working fine the battery died so i plugged it in and started it up again however the charger cant have been fully connected and once back in windows the battery died again on the next boot i noticed windows said it had found the system CMOS/real time clock and had installed drivers for it. checked the driver details it says no driver files are required just like it should ever since then it connects to the network but will not connect to the internet at her house or at mine through wireless and ethernet cable although all other computers work fine windows troubleshooter says "Windows could not automatically detect this networks proxy settings"
I've tried resetting routers and laptop = no change netsh winsock reset and netsh int ipv4 reset = no change ipconfig /flushdns = no change ipconfig /registerdns = no change
I have Asus laptop that will not connect to the internet. It finds wireless networks and will not connect. It keeps saying identifying network and then says unsucessful. It was working fine and then just stopped working and will not reconnect.
I built a desktop to replace my laptop and set it aside for two weeks. So I go back to the laptop and it says the networks available but I can't connect to the router. It reminds of the first time I wired a network at work. All the wireless info seems to be right I went to my RT-nu Asus router and reset that. That seems to be OK. DCHP is OK password for the WPA seems OK. I did upgrade the firmware to the router but that worked ok. That won't have affected the laptop in anyway would it? I do have a preprogram of WIN 8 but its not telling I have to buy it yet. Whoa, how could it if I can't get on the net. Do you think that might be it? Everything on the laptop works well otherwise and it's not informing to but Win 8.
I have an ASUS laptop and wifi is turned on by fn+f2, on the laptop and other devices like ipod touches can connect to wifi but my laptop can't. When you click where the bars of how strong the wifi is it says No connections are available. It does work with an ethernet cable, however I've tried almost everything I know and wifi still doesn't work. It just stopped working yesterday.
I just bought a new Asus laptop and when I try to connect to the intenet through the router on my desktop, it doesn't let me access. The laptop picks up the router, Cisco by the way, Fast Penguin, but shows the word "limited" when I try to connect.
I have a new ASUS N53S laptop and cannot get it to connect to an existing Airport Express network. It can connect to other networks. 1. Other machines can connect to the Airport Express network, including a Toshiba Satellite PC, iPhone, and MacBook. 2. The Passkey is valid and works for the devices identified in (2) 3. When entering the valid passkey, the network rejects it and says the passkey is invalid 4. I have opened the Airport Express utility and changed the passkey to a new one, and all of the devices identified in (2) were able to connect -- but the ASUS laptop still cannot connect, the system still rejects it from the ASUS laptop and says "passkey invalid"
I have an Asus N10E laptop that won't properly connect wirelessly, Windows home ver 2002 installed, Atheros AR5007EG wireless adapter, ATT DSL modem, and Cisco Linksys E2000 wireless router. My other computers connect without difficulty. Connection says it is authenticated and excellent but browsere won't load - "Can't resolve domain name". I also tried to download the TSGSysInfo but avast! says it has a virus.
About two weeks ago, I took out the old motherboard of my HP computer and put in a new ASUS M4A88T-M. The board is amazing, especially for the money, except that I can't connect to the internet.So, for the last two weeks I've power-cycled about a billion times, ipconfig /this/that/and the next thing over and over, I've winsocked, I've turned programs on and off and on again, checked that the LAN is enabled in BIOS, firewall is off, and probably a bunch other things from the 100's of google pages I've searched.I spent 45 minutes on the phone with my ISP, and the guy was 99% sure there is something wrong with the NIC. Windows says that the device is working correctly, and I think that it is. There must be some setting, some driver, something that will reconnect me to the internet.
I just bought a Lenovo ThinkPad for my wife and I cannot connect to my router via wifi. I keep getting the message 'Windows was unable to connect to (network name). I tried it with router security disabled and I still get this message.
Have a Compaq laptop and Gateway desktop computer. Laptop has Windows 7, desktop Windows Vista. Got a new Cisco Linksys wireless router, and trying to figure out how to set this up. Do I use the Linksys CD in the laptop or the desktop? Have DSL. Right now, the Linksys is set up on the desktop, and all is well, but need to get the laptop able to connect to internet through router. Do I need to uninstall Linksys on desktop and install it on laptop?
I am hoping to be able to connect remotely to my friend's Vista laptop (connected to the Internet via a dial-up in a developing country) from my own wireless broadband PC (Win 7).
Is there any recommended software that would enable me to do that or is Remote Desktop Connection able to do it, and what information would I need in order to be able to identify her on the Internet? I would have thought that any IP address that she can see under 'Network & Sharing Centre' or through the Command Prompt would only display the generic IP address of her ISP, wouldn't it? And would both of us need the same type of software to allow me to connect?
Windows 7 laptop does not connect to Wiress router WRT160N. It used to connect automatically for years when laptop is booted.Now Windows troubleshooting gives message to reboot wireless router. It connects automatically when the wireless is rebooted. This issue occues when the router is ON for long time ~ 12 hours or more.
I recently changed the configuration of my Aironet 1140 from WEP to WAP2-Enterprise to make it more secure. I am using the WAP as the radius server. After making the change I connected my Blackberry to the wap as well as a Samsung Chromebook. However when I tried to connect my HP laptop it is unable to connect. Watching from the Aironet's console I see that it is processing the association and windows ask me to enter my uid and password. When I do this I get an authentication error. I have tried several times adjusting parameters on windows but it always fails. Here is the configuration of the WAP:
! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption [Code]....
i use an asus k50c and used to send wireless network connection from it until recently when i upgraded my OS to windows 7 and changed my antivirus to AVG internet security 2011. whenever i try to set up an ad-hoc network, it doesnt prompt me to turn on internet sharing which used to be there before and now no other computer can connect to my network, though it shows on the wireless network list.
I recently bought an ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router. It is working great.Now I would like to replace the wireless card in my Asus N61J laptop.
i use an asus k50c laptop which i connect to internet through a lan cable.i used to send ad-hoc connection to my other laptop for internet connection which was running fine until i upgraded my sys to the win7.the connection is no longer through and whenever it is the web browsers cant open any page.i ve tried everything i can.it shows that the there is connection but its not working.
I am not able to connect my HP laptop (Windows Vista) to the internet via a wireless router/high speed internet.My internet service provider confirmed that it is a problem with my HP laptop.I have a Linksys router. My other laptop (Sony) connects fine.I have tried two browsers on my HP laptop to access the internet with no luck.My HP laptop does say that I am connected to the wireless network.
The wireless adapter keeps saying unidentified network, I can connect from other computers and they are all working fine.
Edit: Forgot to mention its a ASUS wireless n-15 adapter, also the system is a Windows 7 64 bit. Also, has a ip address 169.x.x.x which i know means no internet connection.
Where I can find an "ASUS Wireless PCI Driver" for WinXP?I've found many but ONLY for Vista, 7 or 8. The ones that I've found say that their for XP, but when I download them and try to install them on my XP system,it says that the OS (XP) is NOT supported! They all happen to be for Vista.
Laptop - Asus X53U Wireless Adaptor - Atheros AR9285. Spare USB Wireless - Edimax
A couple of weeks ago, my wireless connection was getting slower and slower. As one day it decided to get extremely slow, I decided to uninstall the wireless card via device manager and reinstall it. Once this had been completed, the wireless just stopped working. The signal bar came up with zero and had a big red X in it. It works fine with ethernet cable but just won't seem to work as a wifi connector.
I have reinstalled all drivers and everything is enabled. When troubleshooting, it comes up with a possible problem with driver. Once this has been resolved it is then a problem with the network. The router is fine as I am able to connect on every other device in the house. I even purchased a USB wifi adaptor in the event of the Wireless card packing in but this is still creating the same problem. I used system restore to roll back the laptop to a time when the wireless worked and it didn't seem to work at all.
I have a Latop Asus A52F Series and the problem is that My internet works fine with the cable but when I want to connect to wireless I cant I keep getting messages windows unable to connect to my wireless called Linksys E2000 Advanced. it works fine with cable but doesnt work with WIRELESS
I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
Recently I bought a ASUS G Series G53SW-XN1 to replace my old laptop and it uses a Atheros AR9002WB-1NG wireless network adapter to connect to my network. On my older laptop I can get the full download speeds on my network of 500-600 kbs, but on my asus I can only acheive between 70-120 kbs. There should be little to no interference between me and my router and it sits only about 15 ft behind me.
My router is an old linksys wireless router which only transmits a B signal. I know wireless B is considered slow but it works perfectly fine for what I use it for and it works on my other laptop.
On my asus laptop, wireless does not work. It works when connected with ethernet cable. Signal show wireless strength excellent but it does not work wireless.
I have an Asus Model U56E. Recently the wireless has been disappearing whenever I turn off my laptop. What I mean is that when I turn on my laptop, the wireless doesnt seem to exist. I go under device manager and all I have is the eternet and my bluetooth device. About 85% of the time, when I go under "action" and click on "scan for hardware changes" the my Intel(R) Centrino(R) Wireless-N1030 will show up along with the Microsoft Virtual WiFi Miniport Adaptor and I'll get my wireless back. However, when my laptop turns off, the same thing happens.
In addition, my fn F2 button no longer seems to work. I'll press on it and majority of the time my light that signals that the wireless is working does not turn on. Most of the time it stays off whether or not I am connected to the wireless
This is what I already attempted to fix it, based on googling for answers: 1. Under the properties of my wireless and miniport adapter, I went under power management and unchecked the box that says "allow the computer to turn off this device to save power"
2. I went to my laptop's power plan and changed all my wireless adapter settings "power saving mode" to maximum performance for both battery and cord
3. I went to the intel website, had it look at my laptop wireless system and followed their recommendation of installing an updated wireless software thing. All that happened was that it told me to disable my old wireless and then install it. However, even though I followed their instructions, it continued to repeat the same message. I had to perform a system restore to get my old wireless back
4. I disabled wireless console 3 (by Asus) under programs and it seemed to work. My laptop was getting connected whenever I turned it on. However, the next day my laptop updated itself (b/c of my system restore) and I am back to the same situation except my wireless console is still disabled.
I have been atte;ting to connect to m home wifii but all it says is "cannot connect" I can see the connection then once i attempy to connect it disappears and i must restart to try again. I tried turning wifii off and on again on the laptop.I checked the password on another device and I am entering it correctly. Ive reset the IP address and reset the router.
