100 Mbps Lan Works On 10 Mbps Only?
Sep 4, 2011i have a 100 mbps lan. but 1 computer works on only 10 mbps half duplex mode why??
View 4 Replies
ADVERTISEMENT
Linksys Wireless Router :: WRT54G - .77 Mbps Download And .17 Mbps Upload Speed
Mar 11, 2013I just ran some speedtests om my PC on the advice of my isp to see if my Linksys WRT54G router might be bad. As a result, I found that the router might not be entirely bad, but it might not be entirely good, either. I got .77 Mbps dowload and .17 Mbps upload on the first speedtest. I got .43 Mbps download on the second speedtest and the speed test hung hear the end. When I connected an IMac to the cable modem with an ethernet cable, the IMac ran strong. So the tech thought I should get a new router.
But wait a minute, isn't there a network adapter in the PC that the router talks to? Might the adapter be the problem, not the router? So I speedtested the wireless network to the IMac. That speedtest was fine, tiptop, like the ethernet direct connection test noted above. Did that tell me that the problem is in my PC network adapter, not the router? Then, I retested (speedtested) the connection on the PC and it was fine...excellent. Good up and down speeds, no hangs.Then, I checked the PC adapter (a Belkin). I saw three adapters on Device Manager, including the Belkin. I downloaded new drivers for the adapters (except for the Microsoft Virtual WiFi Minipoty Adapter - because it got a warning that the download software wasn't signed and might harm my computer).
Cisco WAN :: 2951 - Installation Of 2x4 Mbps MPLS Circuit And 1x8 Mbps Ethernet Link
Feb 18, 2013Installation of 2 x 4 Mbps MPLS circuit on primary router (CISCO 2951) and 1 x 8 Mbps Ethernet link on secondary router (Cisco 2951). We have successfully implement the primary router with 2 x 4 Mbps MPLS circuit. Site is having two computer room CR1 and CR2 and distance between both room is 200mts. CR1 is having primary core router and primary core switch where the service provider terminated the new MPLS circuit and we have done the successful implementation. CR2 is having Secondary core router and secondary core switch where we needs to have the termination of Ethernet link but service provider has delivered the Ethernet link on the CR1 which is incorrect DMARC Location.
Both the computer rooms are connected via optical copper can we use that copper to connect the circuit on CR2, as per my understanding we can use the optical fiber to connect the wind circuit on secondary router on CR2 by using the media connector.
Linksys Wireless Router :: E4200 Slow Speeds / 54 Mbps Wifi And 100 Mbps On Wired
Dec 22, 2011So I have installed my new E4200 version 1 and I am disappointed with the speeds. My computer has a wireless N card and gigabit Ethernet compatibility. I am currently getting a miserly 54 mbs wireless and 100 mbs on the wire (connected with cat6 all the way)... Anything I should try to get close to advertized speeds?
View 9 Replies View RelatedDoes Cable Modem Mbps Dictate Or Limit Router Mbps
Mar 1, 2012In other words. If my cable modem only has 50 mbps is that all I will get out of my wireless router, even if the router has a higher mbps rating/
View 8 Replies View RelatedLinksys Wireless Router :: WRT150N Is A 300 Mbps Or 150 Mbps?
Mar 15, 2013Which is the wireless speed of this router? No speed infos are present in the official web site. In the web some sites say it's a 300, others say it's a 150, others 248...
View 9 Replies View RelatedWireless Gets 25 Mbps Down Speed And Laptop Gets Only 2.5 Mbps?
Jan 8, 2013I have a desktop and laptop here, the desktop being mine custom built wireless and all, and my buddies desktop.The issue that I'm having is that my desktop, regardless of wired or wireless gets 25 mbps down speed, and the laptop gets only 2.5 mbps down speed wired or wireless
View 4 Replies View RelatedD-Link DIR-825 :: 300 MBPS Connection Drops To 150 Mbps
Mar 7, 2011300 M bps drops to 150 M bps when it recycle power. I met all requirements for 300 M bps connection this happen only in 2.4 g Hz Band width.
View 1 Replies View Related150 Mbps Connection Drops To 72 Mbps
Jun 22, 2012I have a Netgear CG3100 modem hooked up to a Netgear WNR2000 router. Both are sending out signals, the CG3100 on channel 11 at 40 Mhz and the WNR2000 on channel 1 at 20/40 Mhz. I keep the WNR for legacy devices while the CG is for N devices only. They don't seem to interfere with each other much.Currently my computer is the only device connected to the modem wirelessly, with the only wired connection being the router. As I write this, the connection has actually dropped to 26 Mbps in the Wireless Network Connection Status window. I understand that this number drops under network load, but there doesn't seem to be any at the moment. If I go into the control panel and simply click apply, the connection jumps back up to 150 Mbps. However, this always drops back down, sometimes immediately, sometimes after a few minutes. It usually settles down at 72 Mbps, sometimes 54 Mbps.My wireless adapter is an ASUS PCE-N13 with v3.2.7.0 Ralink drivers. OS is Windows 7 64-bit.
View 6 Replies View Related100 Mbps On One Side Of Switch And 10 Mbps On The Other?
Feb 15, 2011I have 100 Mbps Half Duplex on one side of the Switch. ( Autonegotiation disabled )I have 10 Mbps Full Duplex on the other side ( Auto-negotiation disabled ). Should the link come up on both sides
View 4 Replies View RelatedD-Link DIR-655 :: 4 Mbps Upload Via CAT5 But Only 1 Mbps Upload Via N-format Wireless?
Jun 30, 2011I just upgraded my cable modem from the Motorola Sufboard 5120 to the DOCSIS 3.0 capable 6120. Provisioned it with Comcast and their "Blast" service (supposedly it caps at 16 down, 2 up).
I had, in the past, used my desktop via N-format wireless (DWA-525 N-format PCI adapter and DIR-655 N-format router) to do a speedtest.net test. I was getting 16 down and 2 up (as advertised). When I switched to the 6120, I did a speedtest.net test again to see what kind of gains, if any, I was getting. Turns out, I was getting 20+ down (nice improvement) and 1/2 Mbps up (a fourth of what I used to be getting?). Called Comcast. They "sent signals" (don't they always?) and claimed that it fixed it. My download speeds increased a smidge (about 22), but my upload speeds were still .5. Called Motorola, they had me do a few things and now I get 1 Mbps up and 27 - 30 down via wireless.
My download speeds are great. I'm content with that. If I hardwire from the cable modem directly to a ****py old laptop, a speedtest.net shows 4 Mbps up. So why do I get such a high upload speed when hardwired (4 Mbps), but a fraction of it (1/4th) when wireless? I'm not using any other devices to sap bandwidth (some are connected -- i.e. another desktop, my Droid phone, etc., but aren't actively pulling packets). And why would it go from 2 up (on my desktop via wireless in the past) to only 1 up (via wireless now) when the setup is the same across the board (as best I recall) other than upgrading my cable modem.
Since I get 4 up when hardwired straight off the cable modem, I assume my DIR-655 is slowing me down somehow. How to pick up the pace a bit? I've already tried the standard "power cycling", etc.
Oh, and the reason I go wireless -- my cable modem and wireless router are in my game room in the basement for my PS3. My desktop computer (and the wife's desktop computer) are two floors directly above it in our "office". Signal strength is "excellent" ... always has been. And again, pretty much everything is the same.
[URL]
Internet Connection Below 1 MBPS?
Feb 26, 2013I was wondering why the heck I'm getting BELOW 1 mbps toward my internet connection? I look at my wireless signal, and it's full. yet, I go on speedtest and have about 0.20 mbps.
Info - My parents pay nearly $100 for this bundle thing with the internet, phone, and something else, I think TV.
provider - windstream
router - F@ST 1704
Also, the router is currently on top of the main computer in the office, on top of the router is a house phone.Yet, if I move the house phone, nothing changes. The computer is on the floor.Should i move it? Would this improve my connection?Even the main computer that's wired with the router gets the same mpbs as wireless.
What Does It Mean By 300M Or 300 MBps Router
Jun 26, 2012I have a TP Link router which is written as 300M wireless router in the home page when I login into it.
I can think of it as 300 Mega bits per second router. Does it mean it can support upto 300 MBPS internet speed or something like that?
Powerline Networking 500 Or 200 Mbps?
Jun 16, 2011I'm planning to network using powerline adapter for gaming. I know it's not the best solution but i don't have any other choice. My doubt is to buy whether a 500Mbps or 200Mbps. Will this 500 Mbps increase performance ?
View 2 Replies View RelatedBroadband :: Why Networks At 10mbps And Not 100 Mbps
Jul 31, 2011I had tried to connect my internet using a 10/100 standard Ethernet card but my net connection was fluctuating. My Brother who is a network engineer told me to switch back to 10 mbps from 100 mbps full duplex and he prayed if that might work. Luckily enough it worked and solved my purpose of delivering uninterrupted net connection.
View 1 Replies View RelatedNetgear 108 Mbps - Wireless Keeps Dropping
Jan 9, 2011We have a wireless router that is constantly disconnecting/dropping our laptops from the internet. We have had this router for about 2.5 years. Is there a specific router out there that doesn't drop. We currently have a Netgear 108 mbps.
View 1 Replies View Related0.05 Mbps Download Speed With DSL Service?
Jan 16, 2011The title of the thread says it all, but perhaps it does not speak to the level of frustration my family and I are experiencing with our DSL internet service:� Many simple, easy-to-load sites like Google will not load on the first try. On Safari, the bottom toolbar will say "Connecting to google.com" until I refresh the page or restart the web browser. Internet Explorer and Firefox are no better -- I've triedA two-minute YouTube video will take about 10 minutes to load (if the page loads in the first place, which it often does not). Speed test sites, like speedtest.net, which reported a 0.05 mbps download speed and a 0.20 mbps upload speed, usually do not work. I had to refresh speedtest.net four or five times before the "testing download speed" section worked.
Gmail has become so slow that I have to use the HTML version, and even that will fail to register my commands about half the time.The only way for me to view most webpages in a reliable manner is to Google search for them, then click on the "Cached" page, and then click "Text-only version." Stuff other than text will prevent the page from loading about 50% of the time.We have a Qwest modem but our ISP is called "TIES." We have their "Residential DSL connection," as described here:
How To Reduce Access Rate Below 1 Mbps
Jul 15, 2012our company has 1 mbps lease line for internet connectivity. but while monitoring i saw it goes up to 1.4 - 1.6 mbps. how can i reduce the access rate and maintain it below 1 mbps ???
View 1 Replies View RelatedWireless Adapter Keeps Changing Mbps?
Apr 9, 2011Running Windows XP with a 802.11n wireless card built in to my laptop. Just bought a new wireless n access point, configured it to be wireless n only and connected my laptop to it no problems. but i noticed at various times when i hover over the wireless connection icon in my dock, the Mbps i'm getting keeps fluctuating. i've seen it go as low as 26 Mbps to up in the 100s.
View 3 Replies View RelatedUse 100 Or 300 Mbps Wifi Router As Bridge?
Jan 7, 2012I am wondering if I should use my old 100 mbps router as a bridge and use the 300mbps one as the main. Or vice versa. I will mostly be gaming on the bridged router and will have a cat6 going from the router to the computer.
View 5 Replies View RelatedWhy Only 100 Mbps Wireless On New Linksys Router
Jul 24, 2012Contrary to what i have been reading, i have a DOCis 3 Modem, on Comcast, with an internet connection of 1GB. My wireless connections are in the 150-300 Mbps range thru a Linksys 4500N router
View 1 Replies View RelatedNot Getting My Expected Mbps Speed On Speakeasy
Jan 17, 2012I'm paying for 18 Mbps download speed, and my laptops and one desktop get this speed, but the computer from which I write only gets 5 Mbps. He didn't know why.I'm pasting my HJT and DDS logs, and attaching Attach.txt. Ark.txt will be copied to this also.
[code]....
Slow Mbps With 60Mb Superhub?
Oct 28, 2012I recently purchased the 60Mb superhub plan from Virgin media but for some reason I am only getting 1-3Mbps when I test it on speedtest.net using 2.4GHz wireless band and I get 10-25Mbps using the 5GHz wireless band. I tried testing my laptop on the 2GHz wireless band and put it in the same location as my PC and get around 35-40Mbps. On the computer downstairs which is closer to the router I also tried testing it and get 50-60Mb. (I can't test it on 5GHz on my laptop or the other computer because they don't support 5GHz)
View 3 Replies View RelatedWhen Desktop Is On Wireless Get Max Burst Of 2 MBps?
Mar 28, 2012When my desktop is on wireless, I get max burst of 2 MBps (Megabytes per sec), or about 16 Mbps (Megabits). Ok.I recently got a pair of Netgear MCAB1001 coax over ethernet adaptersStill getting about 2 MBps, 16 Mbps.The MoCA units are rated for 100 Mbps, or about 12 MBps I'm only getting 17% of rated speed. I know that the performance depends a lot on how many coax splitter you have in the house, maybe even the type of frequency the splitter filter out, how long the runs are, and other hardware cable stuff.But, I wonder why I keep maxing out at 2MBps on both wireless and the MoCA coax setup. Is that just a coincidence? Or is my computer setup weird?This is my test setup:LAN RouterPort 1) Computer #1Port 2) MoCA #1MoCA #2: connected directly to Computer #2.Basically, there is a switch on coax network between Lan Router port 2 and Computer #2. All ports are rated at 100 Mbps, your standard 10/100 ports. I can verify this on the network status.
View 3 Replies View RelatedLinksys Cable / DSL :: Get 300 Mbps With X3000?
Aug 8, 2012Got 300 Mbps with Linksys X3000 in real life?I haven't seen it working at 300 Mbps since I've bought it, so I wonder whether it is truly possible. The maximum speed I've seen was 130 Mbps.
View 7 Replies View RelatedD-Link DIR-615 :: AR9285 DWA-131 But Best Connection Is 150 Mbps
Jan 25, 2012I'm using an HP G60 laptop, running Win 7 Pro x64 SP1, fully patched. I'm usually in the home office, connected to a D-Link DIR-615 router (h/w: E3, f/w: 5.10, the latest). The internal Atheros AR9285 N150 wireless adapter has never been as reliable as I'd like, so decided to purchase a USB N300 adapter. I bought a TP-Link model for $10 and started using it. For some reason, it would only connect at 150, unless I ran the router's Web interface and saved the wireless settings, even without a change, at which point I'd see 300 Mbps. However, at the next restart after hibernation, the connection with the DIR-615 would fall back to 150.
I stepped on the TP-Link USB adapter and broke it. Oops. Decided to purchase a D-Link DWA-131 (h/w: A1, f/w: 1.21, the latest) 'cause it's compact and the box says that, "For Optimal Wireless Performance +Use With Wireless N 300 Router (DIR-615)."Expected 300 Mbps, but it connected at 65. Argh. Did the trick again with the DIR-615's Web interface, and saw 150. But after restart from hibernation, back down to 65. Unable to achieve 300 Mbps, unlike the cheap-o TP-Link adapter. Router is configured according to Lycan's sticky note. Router's Wireless Status shows a signal of 39%, and the router is in the next room in a wood-framed building.Is this as good as it can be? Looks like the DWA-131 is coupla years old with no new drivers for Win 7. Ran the DSL Reports Java speed test, and seeing 18+ Mbps d/l, and 1.8 Mbps u/l, which is about average from Cox here in The OC. If I can't get a faster connection, then D-Link's claim of "optimal performance" is misleading.
Home Network :: To Apply Qos To A 1.5 Mbps Connection
Dec 27, 2011Is there any reason to apply qos to a 1.5 mbps connection. i had comcast with a 15 mbps connection and qos was good for when downloading large files and gaming and all that at the same time. but i have moved and i only can get dsl at 1.5 mbps.
View 10 Replies View RelatedIs There A Limit On Mbps For Windows XP On Wireless N Router
Nov 2, 2012I'm not able to connect at wireless n speed even though i have a wireless n adapter. i can force it but when i do my throughput drops dramatically, 20Mbps -> 1 Mbps. so i try, wpa2 security and can connect to router at 130 Mbps but throughput is 1Mbps when I throttle down connection to only connect at 54Mbps throughput is 20Mbps.
View 3 Replies View RelatedWireless Router For 1 Mbps Internet Connection?
Jan 25, 2012I have 1 mbps internet connection and I got two computers to be connected. optimum configuration of the router required.
View 5 Replies View RelatedWireless Connection Keeps Changing Mbps While Connected?
Sep 29, 2011I have a Linksys e2000 wireless router, my laptop connects fine, but as i keep hovering my mouse over the wireless icon in my system tray, it keeps changing Mbps from 130 at its highest going down into double digit Mbps, then back up to 130. Why wouldn't it stay connected at 130 all the time?Someone said to try lowering the beacon interval, fragmentation threshold, RTS threshold, and mtu size, but will doing that decrease the speed of my connection to the router?
View 5 Replies View RelatedGigabit NIC Slow Upload On 1.0Gbps But Ok On 100 Mbps?
Mar 28, 2011I have a PC with an onboard Realtek 8168 PCIe Gigabit connected to a D-Link 655 Gigabit router.Here's the odd situation: when speed/duplex is set to 100Mbps, my upload speed using www.Speedtest.net is fine (~3.0 Mbps). However, when I switched it over to 1.0Gbps, it goes down all the way to 0.06 Mbps. Download speed is generally unaffected. can't tell which is the likely culprit!
Onboard NIC faulty/underpowered?
Faulty cable (highly doubt, I've tried 5+)?
Or is it a matter of settings? I turned off QoS and WISH on the router, but it didn't do much.
Nvidia Nforce 10/100 Mbps Ethernet Card?
Apr 21, 2012It keeps saying the connection between the modem and the computer is broken. I've installed a new ethernet cable. it works then it drops. we have hughes net here. the techs have been out and cannot isolate the problem.
View 3 Replies View RelatedD-Link DIR-615 :: Slow Upload Speed (0.3 Mbps)
Dec 23, 2011Been plauged with some slow speeds lately and decided to check the speeds, with cable in modem i have 4.9 mbps upload but when i go through the router i have 0.3 mbps. Router is relatively new, just a couple months, firmware 8.00.
View 5 Replies View Related