BSOD Caused By Network Driver (Realtek)?
Sep 25, 2012
I recently replaced my harddisk and ever since I've been getting BSOD's whenever I try to watch a video online (no matter what website I'm on). I'm pretty sure it's not my GPU, because I can watch my own videos just fine. It could be the RAM,ause I ran Memtest86+ for 7 passes and it found two errors, but I have no problems playing games. So, I'm thinking it's my network-driver (Realtek) even though I already (re)installed the latest version[CODE]
View 1 Replies
ADVERTISEMENT
Mar 18, 2013
I recently updated my NVIDIA nForce 10/100/1000 mbps ethernet driver and now my computer wont connect to the internet. In fact, it doesnt even acknowledge that the ethernet chord is plugged in. I am running windows 7 and have had no problems for years now. Since ive had my PC for so long I decided it was time to update, now im at a loss of what to do. I am currently using my laptop to submit this post, as my PC is not a wifi enabled device. I recall having this problem back when I first had this computer made and found a resolution online, (cant seem to find the same site i used back then.) I recall that it had something to do with me using the command prompt. While i have been looking for an answer, I have tried the following with no avail:
Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log press enter
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log press enter
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog press enter
Restart the computer after.
View 1 Replies
View Related
Oct 27, 2008
Trying to install WMP54G v4.0 on XP SP3. I have tried all three PCI slots. Removing driver RT2500.SYS system will boot. Put it back and BSOD Error:driver_irql_not_less_or_equal
View 8 Replies
View Related
Mar 25, 2013
I have accidentally deleted my realtek, how do I get that back? Accidentally deleted Realtek Driver
View 7 Replies
View Related
Feb 21, 2013
Where can I get the driver for a Realtek RTL8168/8111 Family PCI-E Gigabit ethernet nic Lndi56.0
View 1 Replies
View Related
Feb 2, 2010
i have a dell inspiron 1440.i am unable to install lan card real tek driver so that i can connect to local area network internet cable,after uploading driver in network places i see
LOCAL AREA NETWORK bluE tooth lan access server will this connect to local cable? THE lan driver real tek after installation says that shut down and plug realtek PCI-E card to complete installation?what do i do?
View 1 Replies
View Related
Jun 23, 2011
I have two WS-C2950G-24-EI switches each of which were running software version 12.1(22)EA2-C2950-I6Q4L2-M. Both swtiches were viewable from Network Assistant version 5.6(3) and part of a community. I then updated the software on one of the switches to 12.1(22)EA14, and now Network Assistant will not add the new updated device to the community and gives an error of "WS-C2950G-24-EI is not supported as community member". Is the latest version (12.1(22)EA14) not supported by Network Assistant? The release notes indicate the Minimum Software Release is 12.1(22)EA4.
View 1 Replies
View Related
Jul 1, 2012
My dad recently purchased a wireless LAN card to connect to our router for ADSL internet. The card is labelled on the box as a Mecer WF-2113M 300Mbps Wireless-N PCI-E Adapter. Link: WF-2113 Mecer 802.11b/g/n Internal Wireless PCI-e Card - Mecer
First off I could not get the card to work with the original drivers that came with the card so I updated the drivers. (The card's chipset is a Realtek RTL8192CE). After the driver update the card worked perfected until the BSOD's started completely at random. see attached image with description of BSOD.
PC's Specs:
Asus P8H61M LX Motherboard
Intel Core I3-2100 CPU @ 3,10ghz
2x2gb DDR3-1333 Ram
Gigabyte ODIN 460w PSU
Nvidia Geforce 9500Gt GPU
Windows 7 Ultimate x64
The PC was running perfectly before we installed the card. Is there anything that I can do to solve the issue? Unfortunately I cannot test the card in my PC or my brother's as we both don't have PCI-E x1 slots. Also not sure the PC shop will take the card back.
View 4 Replies
View Related
Feb 25, 2012
I have just re-installed Windows Vista on my Toshiba Laptop and it connects fine to my virgin media router using a LAN line but when I try connecting wirelessly, no networks are found. I've tried up-dating the driver files form the C: drive(Window) and also from the net but with no joy.. Network adapter is a Realtek RTL 8187B. I hate admitting defeat as Im sure the solution is probably something simple..
View 3 Replies
View Related
Sep 18, 2011
All of a sudden, my ethernet port isn't being recognized. It doesn't show up in device manager, and i get an error: "The Realtek Network Controller was not found. if deep sleep mode is enabled please plug the cable" when attempting to install the driver for it. i'm using the ethernet port on my gigabyte h67m-ud2h-b3 motherboard and i got the drivers from gigabyte. its as if i don't have an ethernet port it was working a few days ago but now, nada
View 2 Replies
View Related
Apr 23, 2013
Everything was working fine, I was able to make everything work fine. Then yesterday morning I started up my computer and it was not connected to the internet. My ethernet was plugged in and everything was as it should be. I went in to device manager and noticed that my realtek network controller was not in the device list under network adapters. I then tried to reinstall my LAN drivers from ASUS (my motherboard) which is how I got it to work in the first place. However, this time when it "finishes" installing an error pops up and says "The realtek Network Controller was not found. If deep sleep mode is enabled Please plug the cable."
View 14 Replies
View Related
Jan 22, 2011
got my router all set up running and working fine on my computer downstairs.. but my computer upstairs is what im trying to get wireless going.. guessing my network card dosent support wifi is why its not picking it /nor any other houses close to me.. my network card is realtek RTL 8168c / 8111c family pci-e gigabite ethernet NIC ( ndis 6.20 )could of sworn tho at my old house when i had my computer hookd up it picked up my neighbors routers above me .. currently its saying theres no routers or anything to connect too..
View 1 Replies
View Related
Apr 18, 2011
Will a realtek wireless network adapter connect to a Linksys WRT 110 router from a wood frame house to a concrete building approx. 100 ft. away
View 1 Replies
View Related
Nov 9, 2012
Dell Inspiron laptop n4110-6 gb RAM- 575 gb HD- intel i-5 processor 1333mhz. Win 7 -64 bit
everything was fine until yesterday...started up laptop and noticed the network connection icon in my task bar hd the "red-x" through it...i knew something was up cuz i had ethernet hardline in to my machine. after I had inspected every possible home netwrok issue...i noticed it was more pc related.now i go to my device manager to check my network adapters..... there are NONE listed...i go to "View" to find that unhide all devices and note there are only wireless drivers in this device and NOT the typical "realtek-8111E" controller that SHOULD be listed.
So far...i have done these steps
1) ensured BIOS (my cmos is phoenix tianos build) lan settings are correct- done
2) Removed RAM from slots
3) Removed Cmos Battery
4) waited for 15 minutes.it is still not working ....a i even tried a clean install of win 7 and that doesnt work?
View 10 Replies
View Related
Mar 1, 2013
I am facing this trouble since i purchased this laptop i have a Dell vostro 2520 running on windows 8 pro X64, so the problem is that whenever i try to install drivers for Ethernet which i downloaded from the drivers and download section of this website it gives me an error "Realtek network controller was not found If in deep sleep mode please plug in the cable" now the thing is that it cannot be a problem in my windows as i was running on windows til few days ago, I got the same problem in windows 7 as well,
I have searched everywhere and i have tried almost every solution i got but to no avail the problem still persist and i cannot use LAN for Internet or file transfers,
P.S:- I looked for the adapter under the "control panel system and security system device manager Network adapters" But didn't found anything there saying Ethernet or something like that.
I am uploading the screenshots of the problem i am facing.
View 1 Replies
View Related
Nov 28, 2012
Just upgraded to Win 7 Prof 64-bit and now my wireless card does not work. ive tried installing the drivers for it but it keeps saying its not compatible even though it is.
View 19 Replies
View Related
Apr 29, 2012
Wi-fi working fine prior to updating to itunes 10.6.1 but when I update on my laptop i have no access to internet showing "limited connectivity".Only way i can resolve this currently is to restore to earlier point and have now deleted itunes. However i need access to itunes for ipad and iphones.
View 6 Replies
View Related
Sep 25, 2011
I just got a DIR-501 and wired it to my desktop. It runs great! (This DIR-601 board is the closest one I can find to DIR-501.)
After connecting the DIR-501, when coming out of hibernation or when booting up, my computer would hang, apparently after the desktop has already appeared (Win XP Home SP3). The first time this happened I got a BSOD with the following:
View 5 Replies
View Related
Nov 1, 2012
Two years ago, a lightning strike fried my ADSL router and LAN port on the motherboard (ASUS A7V8X-X) of my now very old system. After that, I bought a Wi-Fi USB adapter (AirLive WL1600-USB) and disabled the fried LAN port. Since that moment, my computer kept freezing totally randomly for the past two years - it didn't matter whether I run a dozen of programs or simply leave the system alone. First I didn't know what's causing those freezes, until a week ago. You see, we were forced to cancel our ADSL account for four months, so I haven't used that Wi-Fi adapter for the entire summer (I disconnected it and uninstalled its drivers). During that time - not a single freeze for four months, no matter how great the system load or temperature. A couple of weeks ago, we activated our ADSL account again, so I plugged the Wi-Fi adapter in and installed its drivers - and the freezes started again.
View 3 Replies
View Related
Jan 19, 2011
My set-up is as follows.Orange Livebox (with no wireless network card), which is hooked up to a Buffalo Airstation HP-G54. Which is in access point mode.I have an old desktop PC (Medion from 2003/2004), and a new A52J laptop. Everything works perfectly fine, and I had great internet access all over the house.I have a new housemate who has moved in, and she has brought with her a Dell Inspiron N5030 laptop. This laptop is causing me nightmares!!All of us are on Windows 7.Basically, the internet is disconnecting all of the time, and right clif**king the icon and trying to fix does nothing at all. The only way to fix things are to reset both the Orange Livebox modem and the Buffalo Airstation router.My laptop/PC are using static IP addresses, I've tried hers on a static IP and also using DHCP - neither worked. I have tried ALL channels on the Buffalo Airstation - nothing works. I've tried updating her wireless network card driver - it did nothing.
View 4 Replies
View Related
Feb 27, 2012
We are experiencing continuing high CPU issues on our 6500 (generally 80+% most times).
#show proc cpu sorted | exc 0.00
CPU utilization for five seconds: 75%/67%; one minute: 69%; five minutes: 68%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
[Code].....
View 15 Replies
View Related
Jul 21, 2012
I had an issue today on a 4507r today where when I formatted the compact flash in slot0: (512mb) it caused the CPU to spike to 100% this took about 1.5 hours and did not cause adjacency loss or any thing, but was worrisome. This was a sup IV is this normal and should u let it complete like I did? Also when I copied the os to it from boot flash it caused the same behavior. I have done this a bunch in 6500 sup 720 without this issue?
View 3 Replies
View Related
Dec 17, 2011
I am using LMS 4.0.1 to monitor the data center network devices. I have two core switches, each core switch has an ACE module installed on it. I have configured many virtual context on each ACE module, and these ACE contexts are acting as primary and standby roles. The problem i faced with is LMS reports the virtual ip address configured on each ace context as duplicate ip address, and i didn't know how to deal with it. As to my understanding, this should be the normal behavior due to my setup, but how can i remove this alarm on LMS 4.0.1?
View 1 Replies
View Related
Dec 3, 2012
LENOVO G580 - i5,4gb ram, 500gb harddisk , network adapters- atheros ar8162 pcie- fast ethernet controller, broadcom 802.11n network adapter.i am using quickheal total secutity for a total antivirus protection.My problem is that whenever i connect my laptop using a d-link crossover cable to connect to my desktop the connection establishes successfully but on browsing or copying data the system gives a bsod error.initially i didn't got a clue as to what causes the error but then i figured out that uninstalling q-heal solves the problem an reintalling it again causes the same problem.ive tried using different versions/products of qiuckheal but all end up generating a blue screen error.not only this , whenever i use a software that has some thing to do with network like monitoring appliction wise bandwith or something it also ends up in bsod.
View 5 Replies
View Related
Jul 25, 2011
Since recently replacing my home router with a Linksys E2500, I have been getting Blue Screen of Death (BSOD) with my Company's VPN (AT&T). It only happens when I am running wireless with my E2500. If I am hooked up to my E2500 through a ethernet cable it doesn't happen. I have updated the BIOS on my Lenovo Thinkpad T410 and ensured all of my drivers are up to date. I am 99.9% sure the problem is caused by my Linksys E2500 because I have used my laptop on other wireless routes at work and school and never get this problem. I am also ensured that my E2500 has the current firmware installed and upgraded my Company's VPN to the most current level to no avail.
I am getting DRIVER_IRQL_NOT_LESS_OR_EQUAL Blue Screen of Death in agnfilt.sys.
View 9 Replies
View Related
Feb 5, 2012
Dell dimension 2400 XP home. Connects fine to old linksys g router.With new qwest dsl modem/router get IRQL not less than or equal as soon as I click on connect .Blue screen stop and must reboot.Qwest router works fine with my lenovo lap top. Win 7.
View 3 Replies
View Related
May 9, 2012
I just did a fresh install of windows 7 x64 on a 2tb hd. the only drivers I have installed are the chipset, the onboard audio, usb 3.0, onboard HD GFX, marvell raid controller, and the intel management engine. The only other program installed is intel desktop utility. my onboard NIC is not working. i get an error saying the Local Area Connection doesn't have a valid IP configuration. I've tried setting the IP's and DNS addresses manually. I've tried disabling flow control. I've tried disabling IPV6. I've tried restarting the computer numerous times. The cable is fine, it was working yesterday. This also happened a couple days ago when I uninstalled my BigFoot 2100NIC, so I just said screw it and reinstalled it and internet worked great after that. I've tried pinging two adresses and it failed to ping 192.168.1.1 (the router address). I'm considering just installing the BigFoot I have right next to me, but i'm hesitant because the whole point of the clean OS install was to diagnose a stop 124 BSOD. I guess the question is would I rather have internets or GPU (the hardware I was planning on installing next), but its puzzling me why my onboard NIC is not working.
Here's my IPconfig/all. I've already reset ipv4,ipv6 and winsock through cmd with admin.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Erik-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 1 Replies
View Related
Nov 1, 2012
About 10 months ago I got a new computer, with it I got a the Linksys AE1000 wireless adapter. At first all was fine, no blue screens. About a month after I got all my game and such installed (I am a bit of a gamer) I started to get bsod error 0x0000000D1 in the middle of my game. I wasn't sure the cause of the problem, so at first I ignored it. I started to get the same error more and more frequently and the same cause of the problem. I believe that the wireless adapter is the cause of the problem, but alas I can never be sure..
View 14 Replies
View Related
Mar 15, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP : Charter
I've set up my printer (HP PSC 2410) to the router using TL-WDR3600_V1.0_USB Print Service Client Setup and that part's fine. The USB Printer Controller sees the printer as an "auto-connected printer" and I can select the printer as my default to print to. My problem lies with the fact that every time I try to print something, it causes a BSOD. I'm using Windows 8 and checked to make sure the USB Print Service Client Setup program was compatible with Windows 8 before I attempted anything. The HP PSC 2410 printer is on the Print Server Compatibility list so I don't know why I'm having problems.
The error I get each time I try to print is: SYSTEM_SERVICE_EXCEPTION (TplinkUDSTcpBus.sys). One of the draws of this router was that I could hook up my printer via USB and print wirelessly
View 4 Replies
View Related
Apr 12, 2013
Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
View 1 Replies
View Related
Jun 7, 2013
i am unable to download proper driver for Inspiron 15 3521 win7 32-bit wifi driver.
View 5 Replies
View Related
May 7, 2012
i didn't get wifi driver for myy dell n5010 frm ur website ,how to download this driver.
View 2 Replies
View Related
Apr 1, 2011
half of my laptop driver are corrupted (network, USB, and sound). I had installed a program called 'motion joy' and play with the software... right after i reboot my laptop, the sound icon and the network icon on the system tray are crossed out. I can see yellow exclamation mark on the drivers icons on device manager.
I made an attempt to roll back those corrupted drivers but nothing happen. Even when i try to update it, it says i had the latest driver. ;( I tried to uninstall the driver but the those driver files at 'system32/driver' are still there. I even tried to run driver CD that comes along with my laptop, and when I run the installer, it states that all the drivers are install.
so bascially now my laptop boot, run program BUT can't access internet , all USB ports are unavailable,and no sound at all.
View 5 Replies
View Related
