Backup Account Creation For Routers Through KiwiCat Tool?

Sep 11, 2011

My backup userid, password, privi 15 on all our company routers Say around 300 routers, it is difficult to log in each router and create a backup account, i heard from one of my friend that i can create a backup account and can upload thru the kiwicat tool and it will automatically creates my backup account on all the routers. Procedure to create this.

View 6 Replies


ADVERTISEMENT

Cisco Firewall :: Use ASA 5510 Smart Call Home Feature For Automatic Backup Creation By Email

Feb 10, 2013

I am trying to use the built in feature of Cisco ASA 5510 smart call home feature with the purpose of automatic backup creation by email. I found the configuration [URL]. I already configured the said instructions but when I send a test email it says it cannot contact the email server. Below is the error that I am getting from our ASA. I am new to firewall.

OGI-MNL-ASA-FW0# call-home test profile ASA_Config_Backup
INFO: Sending test message to fcaccam@example.com...
ERROR: Connecting to SMTP server xxx.xx.xxx.xx failed: CONNECT_FAILED(33)
ERROR: Failed: CONNECT_FAILED(33)

View 1 Replies View Related

Routers / Switches :: Eliminate A Guest Account On Wifi?

Mar 29, 2011

When setting up our router for Wifi, we made an account which is locked, but accidentally made one for guests which is not locked. How can we eliminate the guest account?

View 3 Replies View Related

Cisco Routers :: RV042 After Installing Can No Longer Log In To Bank Account

May 28, 2012

After installing the RV042, we can no longer log in to our business bank account.  My personal account works but it is a different bank. What could be causing this ?

View 4 Replies View Related

Cisco Routers :: Create Another Account With User Privileges In RV042 V3?

Jul 26, 2012

I am just wondering if it is possible to have two user accounts in Cisco RV042 V3 (Firmware: v4.1.1.01-sp (Dec 6 2011 20:03:18). User accounts to mean that one user can access the router with an administrative level access can do all the changes and management of the router's configurations and settings while another user can only do viewing of the system summary tab and connect and manage the simple configuration to connection to the ISP in both WANs, like setting up the connection type and release/renew the ip address for dynamic ip assigned by the ISP DHCP server.

View 1 Replies View Related

Cisco Routers :: To Successfully Configure And Connect To DynDNS Account With RVS4000

Aug 14, 2011

How to successfully configure and connect to a DynDNS account with RVS4000?  This was working fine for me until recently when I think I upgraded the firmware to 1.3.3.5.I am trying to connecting to DynDNS.org service.  In the past, I used the following string for the Hostname which worked:'mysubdomain.domain.com&system=custom' (including small quotes)According to the RVS4000 documentation, all you should have to do is specify the host name with DynDNS but this clearly is not accurate.

View 2 Replies View Related

Cisco Routers :: RV082 Backup Vpn To C2851?

Feb 10, 2013

I'm planning to buy a few Cisco RV082's for remote offices and using them to connect to main office Cisco 2851 site to site vpn. So I guess, simple site to site vpn will work without much problem, but I wonder, will backup vpn feature work as expected on backup WAN channel and how should I configure it on the IOS side?

View 1 Replies View Related

Cisco Routers :: RV042 Not Working For Backup

Jun 21, 2012

Updated to newest firmware 4.2.1.02 and wanted to perform a backup of the startup configuration.  I get a "The webpage cannot be found" HTTP 400 error when trying to do this backup.  I have changed some settings since my last backup, but that backup was done using the last firmware revision.

View 3 Replies View Related

Cisco Routers :: RV042 Killing Off Site Backup After About 2 Hrs

Dec 23, 2011

I have 16 customers using RV042 router all 11 have the RV042 router different ISP's. After eleminating every thing else we were down to the routers. Two of the customers we built linux boxes to do the routing and firewalling and VPN, etc. Once in place the problems went away. Which confirmed it was the RV042 router causing the problem.
 
We watched the traffic and after about 2 hrs the router tells both ends to reset. End of communication.
 
My question is how do we stop the router from terminiating the connections. They are not bandwith hogs. They are nessessary connect connections. 

View 3 Replies View Related

Cisco WAN :: 2951 / 1841 - Backup Setup With 2 Routers And BGP?

Aug 20, 2012

I am looking to setup a solution for backing up a Metro Ethernet connection on a 2951 using an 1841 and 2 T1's in a Multilink. The Metro E will be primary, and if the BGP peer goes down, I want it to switchover to the 1841. Can it be done and is there an example of the BGP setup to work off of?

View 1 Replies View Related

Cisco Routers :: RV082 V3 VPN Tunnel Backup Not Available On RV016

Jun 1, 2011

VPN tunnel backup is not available on the RV016 firmware version 4.0.2.08 (it IS on the RV082. The data sheet and the manual for the RV016 is wrong. I have purchased several RV016 hardware V3 and several RV082 hardware V3. Both have the same current firmware version. We have noted that the RV016 does not have the VPN tunnel failover option found in the RV082. It also does not have split DNS (noted in the manual. A I would have thought that the firmware would provide equal options on the RV042, RV082, and RV016.

View 2 Replies View Related

Cisco Routers :: RVS4000 And NAT / Backup Internet Connection?

Apr 8, 2012

Just recently purchased an RVS4000 to take the place of an old NetGear FVS336, which supported multiple NAT translations. It appears that the RVS4000 does not support this, any other models in the small business line support this? I only need this for a backup Internet connection?

View 4 Replies View Related

Cisco Routers :: RV082 Backup File View?

Sep 19, 2012

Is there a way to view the contents of the .exp file generated from exporting the configuration from RV082? I've got a couple of RV082 that have the same rules, but want to compare the configuration. 

View 2 Replies View Related

Cisco Routers :: RVS4000 - Will Config Backup From V1 Restore To V2 Properly

Jun 3, 2012

I'm replacing an older (& failing) RVS4000 v1 with a new V2.  I need to minimize downtime.  Will a config backup from the old v1 restore properly to a new v2 (all have newest firmware)?  There are a lot of tweaks including several VPNs and to do it all manually is not desirable.

View 2 Replies View Related

Cisco Routers :: Moving From Faulty SRP527 To SRP 547 - Restore From Backup?

May 8, 2012

I'm trying to move from a faulty SRP527 to SRP 547 - I tried a Restore from Backup, but it doesn't work.So start from fresh, and I'm having an issue trying to add a 2nd SSID to a VLAN...
 
I keep getting the error:
 
"FAILED! SSID 2 has joined another VLAN"
 
Except it hasn't... its not assigned to any VLAN...

View 2 Replies View Related

Cisco Routers :: RV042 Link Backup Versus Load Balance?

Nov 14, 2011

We have 2 dsl lines coming in and the modem is in bridge mode while the router handles the pppoe information. Each line is 6mb down and .5 mb up. It's ****, yes I know, but this is pretty decent for a small town in the country. To double our bandwidth, I put it in load balance mode. When load balance, I get anywhere from 9-12 down and .8 up. Here's where it gets tricky.
 
When anything is uploaded, the speed drops from 9-12 down and .8 up to about .2-.7 down and .2 up. I realize that we will lose some down and up speed but I wouldn't think it would be this drastic. Is this normal?When they upload to a specific https site (file is about 50mb), it never initiates the upload. If I switch it to Link Backup, it will upload fine. I still lose the speed but at least it does something. I've read that some https sites have issues with grabbing data from multiple IP's so I figured this is the case since it's a medical site that was probably developed in house. Is this true?Does protocol binding work in Load Balance mode? I binded all http and https traffic through WAN 2 interface however, when I do a speed test or check my external IP, it is not indicating the WAN 2 IP address.  Is this a common issue in rv042's or is there a firmware update that solves all these issues?

View 2 Replies View Related

Cisco Routers :: 527W Unable To Route Traffic Via APN Backup Without Disabling VPN Tunnel

Oct 9, 2012

I have a Cisco 527w which we are wanting to deploy to our remote sites however i've found a bug. We use ADSL with an IPsec tunnel as primary and 3G APN for failover . When the ADSL goes down the route via the IPSec tunnel remains and i am unable to route the traffic via the APN backup without disabling the VPN tunnel .

View 0 Replies View Related

Cisco VPN :: Asa 5500 Query Reg Vpn Creation

Feb 8, 2011

i have a query regarding the no. of isakmp policy priority creating..when i create a new policy in ASA 5500 firewall, i get the below error...i assume it will support only 20 nos, where as we can use between 1-65535.. can anyone from cisco confirm it...running version is 8.x & VPN Plus license.Policy limit reached. No more than 20 isakmp policies can be configured.”

View 2 Replies View Related

Cisco Firewall :: ASA 5510 DMZ Creation

Nov 13, 2011

I need to implement a DMZ in my office. Before talking about the configuration , i would like to know best practises of implementing DMZ.My questions are,is traffic from inside to DMZ is permit by default?,What about DMZ to Inside traffic ?,Is it necessary to do a NAT from inside to DMZ with the same IP as of inside,What is the use of " static (inside,dmz) 192.168.1.0 192.168.1.0 netmask 255.255.255.0 ? is it a no nat statement?,Is it necessary to permit traffic from DMZ to inside?,Suppose i have a web server in DMZ, for inside host whether it will take path through ASA or path through internet?

View 17 Replies View Related

Cisco VPN :: ASA 5520 V8.0 Creation Of VLan

Oct 11, 2011

How do you create a vlan? In enable mode, there is no "vlan" command.

View 4 Replies View Related

Cisco Firewall :: PIX 515E 6.3.3 - DMZ Creation Doubts

Jul 26, 2011

I need to create a DMZ zone in my network. One server need to be put in DMZ. I have a PIX 515E 6.3.3. It has free port to create DMZ.

1) Put a new switch for DMZ zone
2) Connect it to the DMZ port
3) Create a NAT for inside to DMZ with same IP as inside
4) Create ACL for permiting traffic to DMZ and apply it to outside interface
5) Create ACl for permitting traffic from DMZ to inside
6) Routing for DMZ in PIX

View 3 Replies View Related

Cisco :: Regular Translation Creation Failed For ICMP Only

Apr 23, 2012

I'm connected to my remote access vpn and am getting the below error, wierd thing i only get this error for ICMP, i can browse data on our network retrieve files etc, but pings fail for some reason

NAT-T is enabled

NAT rules are in place

ICMP is not blocked as can ping elsewhere

Where to being looking as to why only ICMP fails?

View 2 Replies View Related

AAA/Identity/Nac :: ACS 5.2 Creation Of Network Admin Policy For Nx-os Devices?

May 28, 2012

i have acs 5.2 i need to create a network admin policy to our nx-os devices such as nexus switches, how this will be done on acs 5.2?

View 0 Replies View Related

Cisco WAN :: 3750 Vlan Creation Error Message

Feb 7, 2011

I have cisco switch model  WS-C3750G-12S-D. It is in transparent mode. I am getting below error message when tried to create new vlan.
 
Proposed configuration exceeds the limit of 1005 VLANs that can be supported on this platform. Reduce the number of VLANs proposed to be within this limit.
 
After deleting few unnecessary vlans, it allowed me to create.
 
3750#sh vtp statusVTP Version                     : running VTP1 (VTP2 capable)Configuration Revision          : 0Maximum VLANs supported locally : 1005Number of existing VLANs        : 959VTP Operating Mode              : TransparentVTP Domain Name                 : VTP Pruning Mode                : DisabledVTP V2 Mode                     : DisabledVTP Traps Generation            : DisabledMD5 digest                      : 0xBC 0xA7 0xEC 0xDE 0x36 0x6C 0x61 0xB4 Configuration last modified by 97.193.17.172 at 0-0-00 00:00:00
 
I confused with terms 'maximum supported vlans' and 'maximum locally supported vlans'. If switch is supporting vlans 1-4094 means it should also allow to create locally. Otherwise how they will pass through the switch trunks without local creation.

View 1 Replies View Related

Cisco Firewall :: ASA 8.4 Transparent Mode Creation Of Sub Interfaces

Jul 30, 2012

On the ASA running  the 8.4.4.1 code in transparent mode. Can I create sub interfaces in different vlans and attach them to different BVI groups?
 
switch---trunk---ASA---Trunk---switch
 
Gig0/1.1 vlan 100 bridge-gr1          Gig0/2.1 vlan 101 bridge-gr1
Gig0/1.2 vlan 200 bridge-gr2          Gig0/2.2 vlan 201 bridge-gr2

View 6 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 User Creation Deletion Reports

Apr 11, 2012

I could not find any report in ACS 5.3 which gives details on user creation and deletion in ACS. This feature was there in ACS 4.x but it seems not provided in 5.3 version.

View 3 Replies View Related

Cisco Firewall :: ASA 5510 - NAT Regular Translation Creation

Dec 4, 2012

I am having an issue with a specific server that is not reachable from other sub nets. Every other device on the same sub net as the server is reachable via the other sub nets. This server is special because it's NAT'd to an external IP address and has several site-to-site VPN's set up. The firewall is a Cisco ASA 5510.
 
This is the error I see on the ASA syslog when I try to ping the server from another sub net: 3 Dec 05 2012 10:58:49  10.0.15.101 regular translation creation failed for icmp src inside:10.0.20.8 dst inside:10.0.15.101 (type 0, code 0)          
 
The problem server is on sub net 10.0.20.0/24 and the server IP address is 10.0.20.8. Every device on the 10.0.20.0/24 sub net can hit the server, but devices on other sub nets cannot. For instance, a device on 10.0.15.0/24 cannot reach 10.0.20.8, but can reach other devices on 10.0.20.0/24.

View 1 Replies View Related

AAA/Identity/Nac :: ACS 5.2 Using AD To Manage Network Device Admin Policy Creation

May 22, 2012

we managed to integrate our newly setup ACS 5.2 to our regional domain.  now im creating a Device Admin access Policy for Regional Network Admin group and Regional Network Operators group. each having full  and read access respectively. 
 
i already have the default  identity policy and authorization policy with with command sets  fullaccess and showonly for each group, now i dont know how can i match the AD group regionaladm and regionalops so that  each user falls under one of these groups will have a correct  read/write access.

View 4 Replies View Related

Cisco Firewall :: ASA5520 Port Map Translation Creation Failed

Jan 27, 2013

After adding a NAT rule on Friday morning, I'm now getting a bunch of "portmap translation creation failed" messages from my ASA5520.  (It's currently running 8.4(3).)  The failure errors appear to have nothing to do with the change that was made.  [code] I have very similar rules in place for other vendors to access other machines.  The only difference between this new one and those old ones is the use of the objects in the rule instead of the direct IP addresses.  This is also the first one that invovles a range instead of a specific address or network. [code]

View 4 Replies View Related

Cisco Firewall :: Cat 4500 Translation Creation Failed Message

Aug 1, 2012

Two Vlans (ID1 and 100)are on a Cat 4500, which connects to an ASA, interface DMZ. On 4500, there is default route point to the ASA DMZ interface Issue, server on vlan 100 cannot ping a server on Vlan 1, vice verse. When I enable the realtime log, it gives me a “Translation creation failed” message, please see the attached files.

View 1 Replies View Related

Cisco VPN :: ASA 5505 / Regular Translation Creation Failed For Icmp

Mar 15, 2011

I have site-to-site VPN and IPsec VPN installed on ASA 5505. VPNs work OK except few stranges:I can't ping 192.168.17.104 from remote ip 192.168.17.138 - 305006 192.168.17.138 regular translation creation failed for icmp src OLD-Private:192.168.17.104 dst OLD-Private:192.168.17.138 (type 0, code 0) in the same time I able to ping 192.168.17.104 from my network 192.168.10.0 and can ping from ASA No firewall at 192.168.17.104?How to fix it?
 
There is my config:
 
ASA Version 8.2(2)
!hostname ASA5505domain-name domainenable password password  encryptedpasswd password  encryptednames!interface Vlan1 description INTERNET mac-address 0000.0000.0001 nameif WAN security-level 0 ip address a.a.a.a 255.255.255.248 standby a1.a1.a1.a1 ospf cost 10!interface Vlan2 description OLD-PRIVATE mac-address 0000.0000.0102 nameif OLD-Private security-level 100 ip address 192.168.17.2 255.255.255.0 standby 192.168.17.3 ospf cost 10!interface Vlan6 description MANAGEMENT mac-address 0000.0000.0106 nameif Management security-level 100 ip address 192.168.1.2 255.255.255.0 standby 192.168.1.3 ospf cost 10!interface Vlan100 description LAN Failover Interface!interface Ethernet0/0!interface Ethernet0/1 shutdown!interface Ethernet0/2 shutdown!interface Ethernet0/3 shutdown!interface Ethernet0/4 shutdown!interface

[code]....

View 10 Replies View Related

Cisco Firewall :: DNS ASA5510 - Portmap Translation Creation Failed For Udp

May 22, 2012

See the error below on my ASA5510.
 
305006 200.200.0.34 53 portmap translation creation failed for udp src inside:192.168.1.4/1047 dst outside:200.200.0.34/53
 
The first two computers work normally( IP 2 and 3) , but the third computer gets ip does not work on the Internet.

View 2 Replies View Related

Tool For Internet Traffic Analysis?

Oct 4, 2012

Is there a tool which can analyse the incoming and outgoing traffic on a computer hooked to the internet via a router.I would want to know the name of the program or application generating the outgoing traffic or receiving the incoming traffic and if possible the source of incoming traffic.I can read my Dir-628 router's log but all you really see are IP addresses.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved