Blue Screen When Disconnecting Network Drive
Oct 5, 2012Whenever I disonect a network drive - the computer blue screens.I have run all of the usual driver fixes and no solution, (sfc /scannow, 3rd party drive correction, etc).
View 2 RepliesWhenever I disonect a network drive - the computer blue screens.I have run all of the usual driver fixes and no solution, (sfc /scannow, 3rd party drive correction, etc).
View 2 RepliesAbout three(3) months ago, I attempted to set up a wired network between a laptop running w-7 and a desktop with w-xp, sp3. Shortly afterwards, I started getting blue screens with error messages and codes about device confilcts. After disconecting the laptop, I still have the problem sometimes. I looked into the system, and found twenty-seven(27) items with yellow exclamation marks on them. Should I delete them or just disable them?
View 3 Replies View RelatedI have several associates that I am supporting who are working at a customer site. Two of those associates have recently started experiencing BSoD shortly after connecting to the customers network using the AnyConnect client v2.4.1012. I do not know for sure that AnyConnect is causing the problem, or is conflicting with something resulting in the blue screen, but in searching it appears it may be. The two associates having the problem also have the AT&T Global Dialer client installed on their assigned computer, and I have seen this has been a problem in the past with v2.2, though this was supposedly resolved. The other curious thing is that this just started happening, though they have been using the client for several months now, and the AT&T client has been installed the entire time.
All computers are XP SP3, Windows firewall disabled, McAfee 8.7.0i, and Verizon VZ Connect. The only computers with this problem are the ones with the AT&T dialer, and like I said, this just started to happen after several months without an issue.I would really like to avoid removing the AT&T client as they need that to connect to a different customer's network.
I am using Windows XP SP3. The problem which I face is mention as under, When I starts my laptop and its reaches to WinXP screen (appears after BIOS and Before Windows Explorer) at this time if my Laptop WIFI is enable than suddenly a blue screen ( means blue color screen with information which is a glance for me and unable to read) appears and my system goes to restart periodically. Next Scenario appears, system reaches to windows explorer healthy by disable WIFI connection, at the time of enabling WIFI and start search for Networks in range suddenly the same blue screen appears and system goes too halted and need to be restart. For resolving this issue by myself I am trying to reinstall my copy of Windows XP numbers of time but the same issue came in front of me repetitively, I am using my own WIFI router with Internet Connection and there are many others WIFI connection is also available near to my location.
View 6 Replies View RelatedA customer of ours has a Linksys WAG120N but the wireless card in their machine is a D-Link AirPlus DWL-G510.After having ripped my hair out trying to work out what the problem is including taking the machine to our base where it worked on both a WiFi hub and an adhoc network but promptly BlueScreened again when I got it back to the customer's site we tried as a very last ditch effort putting the router back to their old D-Link wireless router and the machine worked perfectly again.Why the router is causing a BlueScreen of Death?The only thing I can come up with is given the age of the card it may have something to do with the period where some D-Link cards disliked being connected to anything but other D-Link gear. If I recall correctly it had something to do with 802.11G still being in its final stages of ratification and D-Link was doing things to try and get their gear working as fast as possible.
View 1 Replies View Relatedmy Dell laptop was working fine when suddenly I received the blue error screen. I ran repair and the computer started working, and only without Internet. Network troubleshooter finds problems with both cable and wifi adapter, and everything is fine on device manager, and but nothing shows up on ipconfog/all command. I am using a tplink router and it's working fine as as I'm currently typing this on my mobile.
View 1 Replies View Relatedi changed the hd in a nm-cue and configured the router accordingly and i opened a session to it but the screen is blank.
[code]...
I have a blueray player that I want to put in the computer that works as a server for me. The server is the computer that I have the vpn attached to and is therefore the one that gets all of the downloads as well.I am also thinking of upgrading the network for this to 1000 bit - N standard? With the faster throughput on the internet will it be feasible to stream a blueray across the network?
View 2 Replies View Relatedwhat is the difference between network drive and map drive?
View 1 Replies View Relatedhow can i block another computer on our home network from viewing my screen
View 3 Replies View RelatedCan I Access Network Drives/Printers If The Host Computer Is On The Welcome Screen, Or Does It Have To Be Logged Onto An Account.
View 1 Replies View RelatedI have a DCS 3420 that is connected via CAT5 to may LAN and 2days ago something happened on the laptop, whenever I open the window in internet explorer on Win XP Pro; the camera just show a black screen.If I use any other computer on my LAN I get a clear picture of the Gate that the camera is focused on...I have checked the laptop drivers and updates but ca not see something wrong.
View 1 Replies View RelatedI was using Document 100787 as a guide.
1. I have 1252 & 1142 AP's connected to the Wism (6.0.188.0 code)
2. FWSM I have a 4402 (6.0.188.0 ) appliance connected as my anchor.
3. ACS is ver 4.2
All of my wireless networks function as expected. I see the successful auth in ACS. I just built a new WPA2 network and set it up to use Splash screen redirect. It doesn't seem to matter what I do it just wont work. IE or Mozilla.Test 1 was to drop the users at the wism. There was no splash screen.There was no evidence of my url-redirect in the wireshark trace.Test 2 used the 4402 as my anchor point with the same results. In both cases the client was authenticated and was able to navigate the internet and other duties. The problem is apon opening the broswer there is no redirect.
I have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I wanted to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username.
What is causing this and is there a way to get around this? Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
I'm trying to see if I can fix my friend's NAS which apparently has some pretty important data on it that wasn't saved anywhere else. They actually had the Geeksquad look at it and they've come to the same conclusion I have so far, but I figured I would ask the internet before I gave the thing back to them and said Geeksquad was right.
Anyways, they have this 5 drive RAIDed NAS which apparently just stopped showing up on their network. I borrowed it from them to see if I could figure it out. It turns on just fine and my router assigns it an IP address, but the IP address just takes me to a blank LaCie dashboard screen. It's weird because it's clearly running it's web server because it's just a gray background with an empty white box and "(c) LaCie 2010" at the bottom. No content at all.
Additionally, I tried installing the LaCie Network Assistant on my home computer and it says it cannot find any network disks. I've tried the "wake up a device" where I enter the mac address, but that doesn't do anything.
All the lights are solid blue on the front and over all the drives so it doesn't appear a drive has failed or something. Even so, that wouldn't really explain the blank dashboard right?
My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies View Relatedso my son has been playing xbox for way to long and i am trying to get him to go outside. i want to block the xbox from the network so it disconnects him when he goes on for to long. is there any program that i can use to do this so i dont have to manually take the Ethernet wire from his room every time.
View 3 Replies View RelatedSo I just bought new laptop. Everything was fine, wireless was working fine until now. My wireless started disconnecting. Tried on old laptop - everything cool. On new laptop - it keeps disconnecting.
View 7 Replies View RelatedThe problem is my wireless network keeps disconnecting once in a while (approx. every day or two). When it goes out, eventually I am unable to connect any of my desktops or laptops wirelessly until I power cycle the modem and the router. But the ones connected by wire work fine.Here is what Ive gone through to trouble shoot:I called my ISP provider, and they said if Im not having problems connected directly to the modem they It works for weeks connected directly with no problems.I called the manufacturer of the router, and they said since it works by wire, and m able to get a connection wirelessly, it not their issue.I upgraded the firmware on the router.I went through 2 different brand new routers (Linksys and DLink), and also tried new adapters.
I tried changing the location of the router, even bringing it 5 feet away from the desktop.I tried playing around with the settings of the router (channel)I even upgraded my Internet connection to 35 mbps which comes with a new modem/gateway which acts as a wireless router too. The new gateway also loses wireless connection.I don know what to do as I ruled out everything. Its not the ISP problem, its not a router issue, and its not a specific computer problem. I just dot know what to do. I really don want to run cables to all of my computers
My wireless keeps on disconncting why
View 1 Replies View RelatedI am connecting the router to a corporate network that assigns "real" IP to it (DHCP). Then I have 3 computers connecting to this router (local IP 192.168.1.2-4).Assuming I want to access a network drive named "ADrive" (on the same corporate LAN) from any of those 3 PCs, how do I do it? ("\ADrive" does not work, neither does replacing the network drive name with its IP, cannot ping either - it's like I'm on a totally separate network).
View 3 Replies View RelatedI'm currently in college, and do most things with my laptop, and I have wifi just about everywhere. It has a generous 500 GB of storage, but I'd like to store non-essential files on, an external hard drive. However, lugging around 3 TB of storage isn't exactly feasible, and with my experience with my current 1.5 TB portable drive, me running around everywhere with it bouncing in my bag is just going to abuse it until it stops functioning (which it has...)[URL]
View 3 Replies View RelatedWe have a user that works from home and connects to our network through a VPN when she needs to access files on our server (mapped as a shared drive.)I created a new shared folder on that same server and she can't map a drive to it. It just continuously prompts for username/password.She is running Win 7 Pro, server is Server 2008. The server is on a domain, she is not. She already has a mapped drive to a different folder on the same server as well as to a folder on another server. We are trying to map using the IP address (\IPFolder) and have tried putting the username as IPUsername and just Username with no luck. Tried mapping with net use. Found some stuff online about changing some registry values - tried that. Change the network type from "Home" to "Work" and still no luck.
View 14 Replies View RelatedWe have a network drive and it's ip is 192.168.1.3. We have created different users with different permissions for each folders. I have a problem in mapping the network drive in each computer. I can map each folder in them though.I access the drive using run command \192.168.1.3 and it displays all folders. I map the folder but don't know how to map the drive itself.
View 2 Replies View RelatedA program is installed on our server, and I run it on my pc by mapping a network drive to the server's hard drive.I'm sure you all know this procedure.Anyway, I can access the shared drive on the server from my pc, browse, create and delete files on the server, all fine.But, when I try to map the drive, it says:"Windows cannot find 'WEaXA.EXe'. Make sure you typed the name correctly, and then try again."And its only on my pc this happens, on all the other pcs its working fine. And from my pc I can map any other shared folder/drive.
View 1 Replies View RelatedI have had the virgin media superhub on 30mb broadband for about a month and over the last week I have been disconnecting from my network up to as much as 3 or 4 times a minute or sometimes once in five minutes and other times it just vanishes from the network list for about 30 seconds then re-appears, sometimes when I disconnect it re-connects almost instantly other times I have to wait about a minute or sometimes even longer even though I can permanently see my neighbours network and my laptop does not have this problem.. I payed �50 for a new wireless card to try and fix the problem and it was fine for a few weeks now it is the same. Restarting the router makes no difference and this is happening all constantly over the last week without fail, i have tried updating my wireless drivers and using different wireless cards.
View 6 Replies View RelatedWhen I click on certain links, the webpage doesn't load, and I can't access that page only until going to it later.
Sometimes it says "no data received" and sometimes it gives the usual page for no internet connection
I have a HP laptop running Windows 7. For the last couple of weeks my network adapter keeps disconnecting from Wi-fi. I have not had any issues with my desktop or the other two laptops in our house. I keep re-connecting and when it kicks me off it does a repair check and tells me that it is fixing the network adapter.
View 1 Replies View RelatedI am pretty new to networking and I have been working on things for over a week and have made some progress which has lead me here. My basic problem is that my network (media shares) is disconnecting from WDTVLIVE while steaming shows through playon. However, I can stream 1080p movies that are stored on my PC all day with no problems. Even when the media shares disconnect, network shares (stuff stores on my PC_) are still available and stream fine.
View 8 Replies View RelatedOne of my Laptop, I cannot see the Network Share Drive from My Network Place. I am using DNS320 Dlink. But I can ping and I can access web base go inside Network Share drive management. But when I try to ma \sharedrivenamefolder, "Error code 0x80070035 Network path was not found ". I already restart the network drive, router and this computer also cannot. Last time we using vbscript to set at startup and let it map automatically when window boot up every day. Other PC with XP all can access. I cannot upgrade vista to 7 because it's from remote site. But now why cannot I don't know what happen with Fuzzy Vista home.
View 3 Replies View RelatedI have a Windows XP SP3 PC and want to map a drive on it thorugh my wireless network
The wireless network has a router (SpeedPort W 701V) that connects to internet, this wireless network is password secured (WPA personal) and open to any device that knows the password.
I've seen some supposed 'tutorials' on this but they differ quite a bit: do any of you know for sure how to map a microsoft skydrive folder as a network drive so that clients can use it as a 'normal' way of sharing files?the same question could be posed for Google Docs - I guess these are competitors/equivalent in aim.
View 6 Replies View RelatedIn my office I have set up a NAS server which is connected to a Netgear VPN router. When I try to connect remotely I can open the VPN tunnel but when I try to access the network drive, it says the network path cannot be found.
View 3 Replies View Related