Cisco Wireless :: 1252 Using Splash Screen WPA2 Network
Sep 23, 2010
I was using Document 100787 as a guide.
1. I have 1252 & 1142 AP's connected to the Wism (6.0.188.0 code)
2. FWSM I have a 4402 (6.0.188.0 ) appliance connected as my anchor.
3. ACS is ver 4.2
All of my wireless networks function as expected. I see the successful auth in ACS. I just built a new WPA2 network and set it up to use Splash screen redirect. It doesn't seem to matter what I do it just wont work. IE or Mozilla.Test 1 was to drop the users at the wism. There was no splash screen.There was no evidence of my url-redirect in the wireshark trace.Test 2 used the 4402 as my anchor point with the same results. In both cases the client was authenticated and was able to navigate the internet and other duties. The problem is apon opening the broswer there is no redirect.
View 13 Replies
ADVERTISEMENT
Jul 22, 2011
Is there anyway to have my wireless network secure on an WPA2? I am sharing with my landlords network. Everytime I try to create a 14 digit password it disables my connection. Does my landlord have to create a password or can I just do it myself?
View 1 Replies
View Related
Mar 11, 2013
I am trying to create a welcome screen for people who join the guest network on my aironet 1040.Webpage pass-through is really what I want but I know that doesn't work on a 1040.What does: IP redirect, Conditional Web redirect or Splashpage redirect?
View 1 Replies
View Related
May 11, 2012
I had assumed it was quite difficult or at least time consuming for anyone to break into a password protected WPA2-PSK encrypted wireless network. I'm still a novice or a learner when it comes to computer networking, so I realized this could be untrue.
Some days ago, my 9 year old nephew visited my parent's home where I had set up a WPA2-PSK encrypted network with what I know to be a strong password for both the router and the security phrase.
When I arrived back to my parent's home, I found out that my nephew was some how able to use the password encrypted network. There was no way he could have known the network password himself. I don't mind if my nephew uses our network, but it shows there are serious holes in the security of a WPA wireless network if he was able to bypass the password.
My parent's later told me that while I was away, my nephew was unable to connect to the network, and so used his cell phone and called his father (my brother-in-law). In just a short of time, my brother-in-law explained to my nephew how to bypass the password on our wireless network and use the internet. My parent's are not too happy about what happened and did not realize what my nephew and brother-in-law were doing at the time.
No matter what password is used to protect the network and no matter how complicated, my brother-in-law uses some type of technique to bypass them. And as demonstrated by the story above, he even uses his own children to bypass our network security.
I would greatly appreciate if some users could instruct me on how to better secure my parent's WPA-PSK2 network from this criminal to prevent the breaching from happening again. And if he was able to break through, then I'm guessing it really isn't too difficult for others to breach the security of a WPA-PSK2 network either.
View 19 Replies
View Related
Apr 16, 2012
I know it is possible to create custom web auth splash pages on the WLC 5508. Is it also possible to embedd a small document (less than 1MB) that users can download directly from the controller? I need this for providing the terms of use for the Guest WLAN.
View 3 Replies
View Related
Jul 1, 2012
At present I have a WLC5508 as a guest anchor in a DMZ and a web-auth passthrough WLAN configured. There is a custom web bundle providing a terms and conditions page.
We want to start to capture the minimum data from a user that logs onto the guest wireless ( email address ) and would like to use the check email function on the controller - BUT - at the same time move from using the web bundle locally hosted splashpage on the controller to an external web server provided splashpage / walled garden.
From my understanding not sure that this is possible as the email check function is only valid in passthrough I think.
View 6 Replies
View Related
Feb 10, 2013
I want to setup a webpage for my guest network (no authentication) users. When the client connects to the open guest network and upon opening a browser they would be directed to a survey that I would like them to take, if they don't want to take it they can begin browsing to other sites without issue. How do I do this on a my 5508 WLC?
View 12 Replies
View Related
May 16, 2011
So I have been tasked with setting up WPA2-Enterprise on the network. Right now for testing I have a single Cisco 1240AP, and a test Windows Domain. The Windows domain is at 2003 functional level, but has been extended to have the Wireless policies, and we have a 2008 DC in the test network also.
Is there any definitive guide to setting up a WPA2-Enterprise wireless network? Most of what I find is mostly client side. I am trying to get the Group Policy setup to push down to the client machines.
View 4 Replies
View Related
Jun 12, 2012
I have a 5508 WLC and 40+ LAP1142N APs spread across 19 locations that allows staff to connect to our private network via wireless. I recently deployed about 40 new laptops all identical make and model HP ProBook 4530's and all have the same client setup for the wireless. Out of those 40 laptops I have 4 that will not connect to the private network. However, these same laptops will connect to my public, open wireless network without issue. In addition to the 4 that will not connect all the others will prompt twice for network authentication.Now, I have about 10 other laptops that are not the HP model and all connect without issue and without dual propt. I don't think this is a wireless network issue but could be some type of issue with this model of laptop.
View 8 Replies
View Related
Nov 18, 2011
My iPad cannot connect to my network wireless through WPA2 using router E4200 the way my Macbook is connected. Only using guest access i can get internet contact. Is this a known problem with this combination and/or is it meant to be, that only guest access gives an iPad connection?
View 6 Replies
View Related
Aug 31, 2012
Trying to get my wife's older laptop to connect to our wireless network. The laptop is a HP pavillion zv5000 running windows XP sp3. The network adapter is a Broadcom 802.11 b/g WLAN. The router is a cisco linksys WRT54G2 V1.5. The security on the network is WPA2 using TKIP+AES encryption. I can't get it to connect to the wireless network. If I bump the security down to WEP it will connect just fine.
View 5 Replies
View Related
Jun 19, 2012
We’re currently using 5508 WLC’s and leveraging Cisco ISE for radius/authentication rule sets.I’m trying to get a splash page to flash and then redirect to a website after a successful authentication to an SSID. Everything on the wireless side works with no splash page (users connect to SSID,authenticate with AD credentials using 802.1X PEAP to our Cisco ISE box, and gain access to the network).When I enable ‘Splash Page Web Redirect’ on the WLC (under L3 security), I’m unclear on the ISE box where I set this up. When I look in the Cisco documention it says:Splash Page Web Redirect—If you select this option, the user is redirected to a particular web page after 802.1X authentication successfully completes. After the redirect, the user has full access to the network. You can specify the splash web page on your RADIUS server. How I specify this on the ISE box? Or am I totally off base?
View 10 Replies
View Related
Oct 5, 2012
Whenever I disonect a network drive - the computer blue screens.I have run all of the usual driver fixes and no solution, (sfc /scannow, 3rd party drive correction, etc).
View 2 Replies
View Related
Oct 11, 2012
At home I have router provided by my ISP, unfortunately it does not cover my entire house. I have Cisco AP 1131 and would like to run it as repeater for my existing wifi network. I tried to google it but could not find good tutorial how to setup Cisco AP as a repeater for WPA2 secured network.
View 2 Replies
View Related
Dec 22, 2012
I'm trying to connect an old HP desktop I have (running windows XP) to my home network, which uses WPA2 encryption. I'm pretty much a network noob so I have no idea what's going wrong. Right now it's stuck on "validating identity" when I try to connect to the network.
So far in my quest to solve this problem, I have:
1. Downloaded Service Pack 3.
2. Tried disabiling Authentication for the network.
From reading around forums I've learned that apparently after downloading Service Pack 3, I should be able to choose 'WPA2' as an option for "Network Authentication" on my Network's properties page. It still isn't showing up for me though.
Since my desktop can't connect to the internet, I couldn't download Service Pack 3 directly so I downloaded it on another computer, put it on a flash drive, and then uploaded it to the desktop. I'm not sure if this could be the problem or not, but if it makes a difference, I can verify on my Computer's properties page that I am running Service Pack 3.
My network adapter is a "Hawking Technologies HWP54G Wireless-G PCI Card". Is it possible that this card does not support WPA2? How do I tell? If it doesn't support WPA2, am I **** out of luck for trying to connect to my network without upgrading the card itself?
Why doesn't "WPA-2" show up as an option for my Network Authentication type?
View 7 Replies
View Related
Mar 19, 2011
I have bought B&N Nook color it is an e-reader. And it couldn't connect to my WiFi use the WEP so I changed my wireless setting to WPA/WPA2 now my e machine N-10 will not connect to the network.
View 1 Replies
View Related
Apr 9, 2012
I have setup load-balancing on an ACE 4710 for HTTP for Sharepoint 2010. The Server Admin says that the IIS server will recognize the right site by DNS name. Problem is I have no clue how to make sure the servers get the DNS name passed to them. They says this is for a multi-homing setup so that we can run multiple sites using the same VIP to the same Serverfarm. How do I do this? I keep getting the IIS splash page since the real server cannot determine the IIS site that I am supposed to access.
View 2 Replies
View Related
Jan 26, 2011
I am administrating a wireless network consisting of 11 APs, ASA 5510, WLC 4402 and Router 1760.The network is sharing an internet connection to all guests without charge so I have no need for authorisation of guests.I would like to implement a splash page that would be shown to all clients when they first connect. The splash page is supposed have only the basic information about the provided service and no logon.Is there a way to do this without purchasing an ACS?
View 3 Replies
View Related
Feb 28, 2011
how can i block another computer on our home network from viewing my screen
View 3 Replies
View Related
Mar 28, 2011
Can I Access Network Drives/Printers If The Host Computer Is On The Welcome Screen, Or Does It Have To Be Logged Onto An Account.
View 1 Replies
View Related
Jun 15, 2012
I have a DCS 3420 that is connected via CAT5 to may LAN and 2days ago something happened on the laptop, whenever I open the window in internet explorer on Win XP Pro; the camera just show a black screen.If I use any other computer on my LAN I get a clear picture of the Gate that the camera is focused on...I have checked the laptop drivers and updates but ca not see something wrong.
View 1 Replies
View Related
Aug 17, 2012
My nexus 7 and my friends nexus phone are both running jellybean 4.1.1 and are unable to connect to our workplace's belkin wireless router. My nexus 7 says "authenticating" then says "network saved" then switches back to "authenticating". My friend's phone just gets stuck on "network saved". My iPhone and most other devices, including a different android phone, are in fact able to connect with no problems. I have tried resetting the router, but I am afraid that is all I will be able to do with regards to the router.
View 3 Replies
View Related
Dec 5, 2012
I have two Cisco Aironet 1252 that I want to configure as a point-2-point bridge. Now I want to know if this configuration supports the 802.11n protocol.
View 2 Replies
View Related
Dec 16, 2010
I am replacing an older AP with a new 1252 unit. I attached everything and powered it up, but my DHCP server does not appear to be finding it and assigning an IP address. The status light stays green and the ethernet light blinks randomly green. Seems to be connected fine, but without an IP I cannot configure it to use it.
View 2 Replies
View Related
Feb 17, 2013
How can i connect my laptop (11n supported) to LAP 1252 with WLC 7.0.116.0?Status: 11a enabled on wlcDCA channel list in 11a on wlc is showing only 149 153 157 161 channels.
View 6 Replies
View Related
Jul 17, 2012
I have a lightweight AP that boots into RoMmon, if i hold the reset button in for 10 seconds or so it will boot into the IOS and download the config from the controller but never registers. then once i reboot it it goes back to Romon unless i hold in the button again.
View 5 Replies
View Related
Jan 5, 2012
I have a used 1252 wireless AP. I can't get into it. How do I reset to factory default?
View 1 Replies
View Related
Jun 11, 2012
an Aironet 1252 which is failing on boot. When power on the access-point shows the error below.
WARNING: A memory error occurred during the system start-up self-test. The device must be serviced if the error persists.
The following commands can, optionally, be used to initialize the flash file system and the TFTP file transfer system:
But when this happen, I can start the IOS manually doing flash_init and boot in ROMMON. After do this commands, the access-point starts and works normally.
How can I check and correct the memory and solve this issue?
View 3 Replies
View Related
Jun 20, 2011
Is it possible to Change IOS of 1252 LWAP AP to Autonomous AP? I have seen some documents for changing Autonomous AP to LWAP and change back procedures.
View 4 Replies
View Related
Jul 1, 2012
we want to have full wireless coverage in a big warehouse (120mx90m) and 15 meter Height that will be having big racks (14 meters height) and 2 meter between the racks and the rack itself is 1.5 meter (2 rack back to back), now we will be having scanners and we need to make sure the wireless is covering everywhere.Where is the best place to put the AP, Ceiling? How Many APs per row ? each row will be around 60 meters length.
Is AP 1252 a good choice? The scanners are a/b/g.What i'm thinking of is to put 1 AP per row mounted on the ceiling and antennas facing down because it is hard to mount the APs between the rack because of the automated racking system.
View 12 Replies
View Related
Sep 10, 2012
Currently my company has 1 primary SSID that is used throughout both floors of the building. We have 1252 LAPs which have 2.4 and 5Ghz antennas. I'm not sure if this issue is only with XP or perhaps it's the computer's drivers but we run into problems with end users going to a different location and having a very weak signal or nothing at all, yet coverage is fine. I believe the problem is the end user's machine selecting the strongest signal and it I have the feeling that switching bands isn't being done as it should when it's in range. So my question,
Should I split up our 1 SSID and created multiple SSIDs according to the location and include 5Ghz or 2.4Ghz in the SSID name so it's easier to ensure that users are connected to the proper signal? I want to ask if multiple SSIDs would still enable users to freely roam (as long as the ssids are configured) throughout the building without noticing a loss of signal but currently just having 1 SSID isn't really enabling people to freely roam around without connection issues.I don't believe having multiple SSIDs will be useful for the computer's choose their connection any more efficiently but allowing the user to manually see what they're connected to and pick something better according to their location.
View 3 Replies
View Related
May 15, 2011
I am configuring a mobile van that is used for a mobile health clinic to drive to several locations and when pulling into an allocated parking spot the van will connect via wireless automatically. I am using autonomous 1252 AP's and am considering either briding or workgroup bridging.
The issue I am encountering is that the AP inside a van is a router that has to do DHCP across the wireless and because the ethernet interface between router and AP in the van never goes down the router does not know to re-DHCP. I remember from way back there was an IOS command to track a serial interface and drop the ethernet if the serial link goes down. Is there an equivalent command for AP's to drop the ethernet interface if the radio interfaces go down?
View 2 Replies
View Related
Oct 27, 2012
I am using two Cisco Aironet 1252 (cisco AIR-AP1252AG-A-K9) to setup a point to point link (one is configured as root bridge and is as a non-root bridge). Both Aironets are running software version Version 12.4(25d)JA.
Is there a way that I can that I can perform an antenna alignment test on the Aironet that is configured as a non-root bridge?executing the following command dot11 dot11radio 0 ? does not show the antenna-alignemnet option.
View 11 Replies
View Related
