Cisco AAA/Identity/Nac :: 5508 Splash Page Web Redirect
Jun 19, 2012
We’re currently using 5508 WLC’s and leveraging Cisco ISE for radius/authentication rule sets.I’m trying to get a splash page to flash and then redirect to a website after a successful authentication to an SSID. Everything on the wireless side works with no splash page (users connect to SSID,authenticate with AD credentials using 802.1X PEAP to our Cisco ISE box, and gain access to the network).When I enable ‘Splash Page Web Redirect’ on the WLC (under L3 security), I’m unclear on the ISE box where I set this up. When I look in the Cisco documention it says:Splash Page Web Redirect—If you select this option, the user is redirected to a particular web page after 802.1X authentication successfully completes. After the redirect, the user has full access to the network. You can specify the splash web page on your RADIUS server. How I specify this on the ISE box? Or am I totally off base?
View 10 Replies
ADVERTISEMENT
Apr 16, 2012
I know it is possible to create custom web auth splash pages on the WLC 5508. Is it also possible to embedd a small document (less than 1MB) that users can download directly from the controller? I need this for providing the terms of use for the Guest WLAN.
View 3 Replies
View Related
Jul 1, 2012
At present I have a WLC5508 as a guest anchor in a DMZ and a web-auth passthrough WLAN configured. There is a custom web bundle providing a terms and conditions page.
We want to start to capture the minimum data from a user that logs onto the guest wireless ( email address ) and would like to use the check email function on the controller - BUT - at the same time move from using the web bundle locally hosted splashpage on the controller to an external web server provided splashpage / walled garden.
From my understanding not sure that this is possible as the email check function is only valid in passthrough I think.
View 6 Replies
View Related
Feb 10, 2013
I want to setup a webpage for my guest network (no authentication) users. When the client connects to the open guest network and upon opening a browser they would be directed to a survey that I would like them to take, if they don't want to take it they can begin browsing to other sites without issue. How do I do this on a my 5508 WLC?
View 12 Replies
View Related
Feb 19, 2012
I have a 5508 WLC running 6.0.202.0. It functions as the Anchor Controller for the guest network. It sits in our Internet DMZ and is isolated from the rest of the network. It does not connect to AD, ACS, etc. The guest wireless WLAN is configured for Web Policy - Authentication. I have a customized login page. Credential management is done by WCS.
Users are connecting to the guest wireless network and entering their creds with no issues using mobile devices (iPad, etc). Then the mobile device goes to sleep / turns off and when they go to use it again, they have to type their creds in again. They dont like retyping their creds throughout the day.
good way mitigate the multiple logins? Something like a 'save password' option on the customized page?
View 5 Replies
View Related
Mar 11, 2013
I am trying to create a welcome screen for people who join the guest network on my aironet 1040.Webpage pass-through is really what I want but I know that doesn't work on a 1040.What does: IP redirect, Conditional Web redirect or Splashpage redirect?
View 1 Replies
View Related
Apr 9, 2012
I have setup load-balancing on an ACE 4710 for HTTP for Sharepoint 2010. The Server Admin says that the IIS server will recognize the right site by DNS name. Problem is I have no clue how to make sure the servers get the DNS name passed to them. They says this is for a multi-homing setup so that we can run multiple sites using the same VIP to the same Serverfarm. How do I do this? I keep getting the IIS splash page since the real server cannot determine the IIS site that I am supposed to access.
View 2 Replies
View Related
Jan 26, 2011
I am administrating a wireless network consisting of 11 APs, ASA 5510, WLC 4402 and Router 1760.The network is sharing an internet connection to all guests without charge so I have no need for authorisation of guests.I would like to implement a splash page that would be shown to all clients when they first connect. The splash page is supposed have only the basic information about the provided service and no logon.Is there a way to do this without purchasing an ACS?
View 3 Replies
View Related
Mar 13, 2011
I want to create an ad hoc network on my lap and when other users connect to my ad hoc network and open your browser for the first time ... I take a personal website, not to have set in your browser ..
View 1 Replies
View Related
Mar 1, 2013
We need to create Guest WLAN on WLC 5508 which will be used for internet access only. My questions are:
1. Is it possible to use our external web proxy server to authenticate users?
2. Can we also forward all traffic to the external web proxy to filter the websites that can be accessed (without configuring it on the browser)?
3. Can this be achieved using the L3 webauth?
Our topology:
WLC -- Switch -- ASA Firewall -- Internet -- External Web Proxy
We are using WLC as DHCP server for Guest WLAN with ASA Firewall as the gateway.
View 6 Replies
View Related
Sep 4, 2012
I have an open SSID on 5508 controllers - configured as anchors and need to redirect wireless clients to the wireless help page automatically once they have connected and opened their browser.I've read all through the web auth and pass through discussions on here but nothing seems to be quiet right for me - unless I am completely missing something.
View 5 Replies
View Related
Oct 19, 2011
I have a problem with a customer of mine. We have deployed two new WLC5508 running r7.0.116.0 and AP1142s, also WCS with r7.0.172. When we setup a "Guest Access" we ran into trouble.The problem is that we can associate to the SSID/AP and get an ip-adress. When we open the web- browser we do not get redirected to the virtual interface but instead the _hostname_ of the WLC. Like this: url...
I we manually replace "cisco6a19c4" with 1.1.1.1 it works as it should, the login page appears, we login and can access the internet.We have tested and disabled web-auth on the ssid an everything works, we can directly go out on the internet, DNS works without any problems. [code]Guest network (VLAN) is transfered from WLC via the trunk to the Cat4503 and then connected on a access-port to a separate broadband-router, then to the inetrnet.DHCP to guest-users from separate broadband-router which is def gwy and "DNS".On the virtual interfaces no hostname is configured.
View 6 Replies
View Related
Aug 24, 2011
I'm attempting to redirect SSL from the base site to a different page on the same SSL site. I want to redirect https://10.4.16.54/* to[URL] . If I enter[URL], site loads, but if I enter simply https://10.4.16.54, it times out. The ssl_sharepoint service is my ssl_proxy_list.
content Sharepoint_https
flow-timeout-multiplier 10
sticky-inact-timeout 35
vip address 10.4.16.54
application ssl
[code]....
View 5 Replies
View Related
Oct 21, 2011
I am configuring my 5508 WLCs with SW version 7.0.116.0. I configured a guest ssid with web-authentication enabled, but I cannot retrieve the login page on the controller. I configured the virtual interface with the addredd 1.1.1.1 SSID Layer 2 security: None SSID Layer 3 security: Web Policy enabled
I join the ssid with clients, receive the IP address correctly however when I try to open a web page, the login page does not appear. When I check the client status I see that it stuck in WEBAUTH_REQD state.
View 16 Replies
View Related
Jun 5, 2012
Where do you turn this option off? i have looked under security and did not see any thing.
View 1 Replies
View Related
May 21, 2013
I have the following systems in place:
5508 WLC - 7.4.100.00
NAC Guest Server - 2.1.0
I have setup an SSID with external Webauth, which is pointing to the login page on the NAC.All works fine but I cannot use the logout page which is customized on the NAC. I always get the internal default logout.html of the WLC and I cannot customize that.Every customization which I have done to the logout.html (then uploaded it on the WLC) will not be recognized.Is there a way to customize that logout.html?
View 1 Replies
View Related
Aug 1, 2012
I've been asked to create 2 wireless networks for guest access. They are to be used by clients of 2 different companies and they have asked for the website of each company to automatically open as a landing page. e.g.
-WLAN1 - password is companyname1 - landing page = www.companyname1.com
-WLAN2 - password is companyname2 - landing page = www.companyname2.com
Is this possible with our 5508 WLC? I have googled it and can see that you can set a web auth page but I need different landing pages depending on which WLAN is connected to.
View 11 Replies
View Related
Mar 5, 2013
We have a centralized WLC with some branch office with AP's in Flexconnect Mode. The Wlans are configured to use Web Authentication (Landing Page). The Landing Page is Cisco Default.
We're experiencing some problem with Apple Devices, on some the Landing Page apperars on some not. The WLC Software is about 1 year old. On a XP machine the landing page doesn't appear too, but you can type in the address manually and it works.
Whats the best solution to include the Apple Devices successfully in the WLC Wireless World.
View 9 Replies
View Related
Jul 22, 2012
I have implemented a Guest WLAN solution as per the recommended design from Cisco. We have two internal WiSM2 controllers providing services for Internal secure SSIDs. Both these controllers are members of a Mobility and RF management group.
Two 5508 controllers have been installed in our DMZ for resilience and have been placed into a separate Mobility group. All controllers (internal and external) have been linked together as mobility neighbours in a full mesh and a new SSID for Web Guest traffic has been anchored to the controllers in the DMZ.
Web page authentication works perfectly fine, but I cannot for the life of me get the MAC filtering override to work, i.e. if a MAC address is present, do not redirect to the splash page for web auth. I know I can get around this by just creating two separate SSIDs. But the business is used to just having the one SSID for all guest traffic. Is this a known limitation when anchoring SSIDs to controllers in the DMZ ?
View 1 Replies
View Related
May 28, 2012
(5508 WLC, 1142N APs).I understand if I enable the AP mode to Rogue Detector from the details page of the AP, the AP stops accepting requests and is now looking for rogue items on the wired network. Is this the same when I enable Rogue Location Discovery Protocol? Will I lose the wireless functionality of all of my APs on the controller?
Next question, when I look at the Rogue Summary on the Monitoring page I see three Adhoc Rogue devices. When I select the Detail link only one shows. I remember the other two were HP mutifuction devices with WIFI enabled but I cannot retrieve that information anymore.
View 9 Replies
View Related
Jul 18, 2012
I have a Cisco 5508 running version 7.0.116.0. This controller hosts an open public wifi that requires users to accept a terms agreement via a Web-Passthrough setup that redirects them to the terms splash page. For most people this works without any issue. However, if a user has their homepage for their default browser set to a https site, such as [url]..., then they are never redirected to the terms splash page. The page will just spin and spin until finally they get a timeout error.
View 7 Replies
View Related
Jul 24, 2012
When a guest user first trys to access the "guest" WLAN, they are presented with a "certificate page" before the web athentication page / login is presented. The WLC forces an internal redirect to https://1.1.1.1 causing the certificate page to appear. Can this be bypassed? I am runiing 5508 with 7.0.220.0.
View 12 Replies
View Related
Feb 20, 2012
Is there a way to put a login banner on the ACS admin web page? Either display it directly on the web page or do a redirect to a banner page? Can I edit the admin pages directly or does ACS provide a mechanism to add this type of feature?
We are using ACS 5.3 running on VMWare.
View 2 Replies
View Related
Sep 23, 2010
I was using Document 100787 as a guide.
1. I have 1252 & 1142 AP's connected to the Wism (6.0.188.0 code)
2. FWSM I have a 4402 (6.0.188.0 ) appliance connected as my anchor.
3. ACS is ver 4.2
All of my wireless networks function as expected. I see the successful auth in ACS. I just built a new WPA2 network and set it up to use Splash screen redirect. It doesn't seem to matter what I do it just wont work. IE or Mozilla.Test 1 was to drop the users at the wism. There was no splash screen.There was no evidence of my url-redirect in the wireshark trace.Test 2 used the 4402 as my anchor point with the same results. In both cases the client was authenticated and was able to navigate the internet and other duties. The problem is apon opening the broswer there is no redirect.
View 13 Replies
View Related
Aug 20, 2012
As we know that WLC (i.e. 5508) does not support MAB (MAC Auth Bypass) and it supports CWA in 7.2.x. CWA is a result of successfull MAB. So how CWA work for wireless? So it means WLC support MAB?
View 5 Replies
View Related
Aug 20, 2012
we have deployed L3 in-band scenario for wireless 2 years ago and the solution was working without any problem. we have upgrade wireless controller to 5508, since then, when users login to the first page and certified, and they want to browse to the internet, NAC redirects the web page and ask for authenticatin again, despite the users' devices are being shown as certified devices in the list.
View 6 Replies
View Related
Sep 25, 2011
Having an issue with Cisco ACS v5.1.0.44 and the Cisco WLC 5508. Cannot get users to authenticate and keep getting error messages referring to EAP session timeouts from WLC filling our logs. Seems to be with this model WLC because we have Cisco 4400 WLCs pointing to the same ACS with no issues. Is there a bug or special configuration that is necessary to marry the 5508 with ACS v5.1.0.44?
View 9 Replies
View Related
May 18, 2011
getting a Cisco WLC to work with MS NPS server? We've done it before albeit with differnt code versions.
I have a Cisco 5508 WLC running 7.0.116.0 code hosting a WLAN configured for WPA2 with 802.1x for authentication. I have two Windows NPS servers configured as the RADIUS servers for EAP-TLS authentication. Via debug info on the WLC I can see the 802.1x handshake take place with the wireless client and the WLC as well as a successful transmission of an Authentication Packet from the WLC to one of the RADIUS servers. However on the WLC I see repeated RADIUS server x.x.x.x:1812 deactivated in global list and on the NPS server I'm seeing event log errors indicating "The Network Policy Server discarded the request for a user" along with the pertinent auth request info that I would expect the NPS server to receive from the WLC. Based on the WLC debug info I'm never actually getting to the EAP-TLS certificate authentication part. It seems the NPS servers don't like the format of the initial RADIUS authentication request coming from the WLC and so don't respond whcih in turn casues to WLC to switch to the other NPS server which produces the same issue.
View 2 Replies
View Related
Dec 14, 2011
How Cisco Identity Service Engine (ISE) can work with WLAN controller 5508 to do the Local Web Authentication, on behalf tje guest profile is create using Cisco ISE guest management?
As i check Cisco ISE caveat wireless only support on LWA, and LWA not supported on Authorization's VLAN assignment.
what i need to concern abou the ISE authentication and authorization policy on behalf on Wireless LWA with use of ISE guest management case?
View 1 Replies
View Related
Jan 9, 2012
Having issue with WLC 5508 using ACS 5.2 tacacs+ protocol to do device management.The problem statement is after key in the username and password on the WLC login page, it is endlessly prompt for authentication on WLC. Whilst on ACS monitoring and reporting i able to see it is successfully authenticated, shown at AAA protocol > TACACS+ Authentication.On ACS, the shell profile for this is setting role1 , value = ALL.
View 3 Replies
View Related
May 24, 2011
I have just recently purchased a 5505 Controller and 30 3502i AP's. On my main corporate WLAN, I would like to allow users to be able to authenticate via Active Directory username and password.I am also looking for as little client side set up as possible. From what I have researched, I will need to use some type of EAP method.
I have come across two methods that appear to be the top contenders.
EAP-FAST - The method seems to be a possibility but I see that it uses certificates. If I use this method, does it mean that I would have to import the certificates to each machine manually? Also, can I configure thsi to work with just the 5508 Controller and an AD Database server or do I need an intermediary like IAS or ACS?
PEAP/GTC - This method is also a possibility and I think that it does not require certificates. Does this also require an intermediary like ACS or IAS.
View 3 Replies
View Related
Sep 20, 2012
We`re using a WLC 5508 with SW 7.2.103.0.The most things are working fine, but i have a problem with the web auth.
Setup:
- Max Concurrent Logins for a user name is set to 1
- Max-Login Ignore Identity Response is set to enable
- Web Authentication Type is set to customized
The Problem:
- the user "test" is logged in at device1 (working), the same user "test" try to login at device 2 (is not working, fine!) -> login is not accepted, WLC redirects to the INTERNAL Web Login Page.The problem is the redirect to the internal web login page after failed login. If i try to login with a not existing user, the redirect is working perfect to the customized web login.
View 4 Replies
View Related
Apr 4, 2013
Environment :AP 2602, WLC 5508 V7.4, ISE 1.1.2, Prime Infras 1.2
For a specific SSID, we use MAC address as 1 of the conditions to authorize access only for the company-owned mobiles (smartphones and tablets), the other condition being, for the mobile, to present a valid AD user/password;this way, the so-called BYODs are rejected since this is the rule within this company ;The difficulty with this approach is the fact that there is no way in ISE Identities Endpoints nor Groups to associate a user-friendly name to the MAC address of the mobiles, which makes very tedious some actions such as a search in the ISE authentication Log based on the MAC address value itself;the question is just to know if it is planned to add a new field in Identities Endpoints definition that would allow to associate a user-friendly name to a MAC address, for future ISE versions,
View 1 Replies
View Related
