i have two broadband line in a lan. it is physically connected to same switch then same switch to connected other computers.now, i want to when one broadband line down or disconnected in the mean time another broadband line automatically backup internet line. so i want to free software for this reason to get these solution.
View 1 Replies
In a house that is too large for a small wireless modem to send a signal far enough, is it possible to use a second modem in the same phone line (not at the same time). Filters are used in the spare phone jacks.My main question is: when modem A is being used and modem B is switched off, is it necessary for the splitter for modem B to be removed and the filter put in its place? Or is the fact that modem B is switched off sufficient? I suspect that it's necessary and that's why my friend gets very slow download speeds even when the other modem is off.She insists that it used to work but I think she was just lucky if it used to work.
View 2 Replies View RelatedOur church has 1 phone line, we run BTBusiness Broadband at one of the building where we have a couple of charities based. We have the phone line connected to an extension at the other end (where the Church is) >80m away. Any way of running a second concurrent router on the extension so I can set up an office with a VOIP number, pC's printers etc there too? We use Devolo ethernet over mains and wireless for the main building, but the church itself is on a completely seperate mains power supply so I can't use that. I could run 100m Cat 5 and locate a switch on that, but any way of achieving something similar over the phone cable which is already in place.
View 2 Replies View RelatedI have a broadband router (Linksys E1000) which I've flashed with a DD-WRT firmware. After doing so I realized that this router doesn't have an interface for ADSL port(RJ-11). How can I use the Linksys E1000 for my home network?
I've heard that I can use ADSL modem(not a router) & plug the RJ-11 to it & take from it the Ethernet & plug it back to the E1000(in the WAN port) would that mean that I can get just a modem and not a hybrid?
Note: Also, I have to mention that my ISP is using PPPoA & DD-WRT is not supporting it, but i googled & they said that the ADSL modem cab be the rescue. Can I pick any ADSL modem for this specific scenario or am I looking at a specific model?
Secondly, can I use my old router to do the job instead of buying a new ADSL modem ? & is it a good approach ? or should i buy a new ADSL modem ?
Update i turned my DD-WRT router(E1000) to act as access point, since this is the only way that i can use it with the DD-WRT feature. & i think this is better than have nothing :) I can now have the DD-WRT functions ;)
1.I want to have a seperate Broadband line for a Server running TS for certain users to log into to.
2. I want another broadband line that is split via switch for other users and servers.
Reason: Speed up connection for TS users so that are on a dedicated line.
How will I get TS Server to speak with my Main File server to access the files they need and there is 1 folder both networks should have access to?
TS server and Main server in Same building. Don't want to use a WAN routers to connect the 2 routers together. My Broadband (According to speedtest.net = 12Mbps DL/ 0.80Mbps UL)
I can not get onto the internet via dial up. The message says that I have no dial tone. Using the same line, I get a dial tone on the phone. I can get onto the internet via a DSL connection, but it will not make a connection when I have a telehone line inserted in the phone line jack. This problem started after the power went off and on quickly two times. I have followed all the instructions that I have found to reset the modem, but to no avail. Is it possible that the phone line jack needs to be replaced.I have a gateway laptop with Vista program.
View 4 Replies View RelatedHalf of the time i have to stay at hotel due to business trip. The hotel i stay will provide free internet broadband with cable but no WIFI. Can i set up WIFI if i have router?
View 2 Replies View RelatedI am using PTCL' DSL in my country. I want to know how can i increase download speed of stuff from internet?
View 2 Replies View Relatedi need to change my computer setting so it connects to a broadband modem?
View 1 Replies View RelatedI m having broadband connection.. but its speed is not that much good..
View 1 Replies View RelatedHow to share reliance broadband connection between two pc's using hub or direct line in one computer have windows 7 ..
View 1 Replies View Relatedi m getting error 769 when i m trying 2 connect my broadband.. when i searched for network adapter 2 make it enabled in d device manager duologue box.
View 1 Replies View RelatedXP Home edition, went to tools can't find working off line or working online to make sure off line is not checked so I can get on line DSL Verizon , Wireless router, wireless switch in on, on the cpu
View 1 Replies View RelatedI need to change providers from Verizon to AT&T. This modem came with the AT&T Sim card installed in my notebook. The software (Dell Mobile Broadband Utility Help) says " Choose Network Selection from the Settings Menu. Select AT&T and click Load." Unfortunately, Network selection is not an option.
How do I do it? This modem is compatible with Verizon, AT&T and Sprint networks.
My daughter is 10,000 miles from home taking classes in South Africa and her laptop is having issues! She can connect fine via wifi at the local internet cafe and it works just fine....but from her flat she has to connect wifi first then sign into broadband. She can get the wifi connection but her modem just sits there saying dialing and never gets anywhereWe have tried updating the modem driver to no avail, there is no static IP set up in her network connections, modem status says its ok.
View 2 Replies View RelatedMe finding my friends IP. I know its not good finding others IP but i need that seriously.
View 4 Replies View Relatedwhen i install a 3modem broadband, it appear im my pc, uninstall and reboot&restart your computer
View 1 Replies View RelatedHPavillion a1129n WiinXP SP3
View 1 Replies View Relatedi am using bsnl broadband connection.when i want to connect to internet it is saying that TCP/IP NOT INSTALLED.DISABLE E-MAIL SCANNING IN YOUR SEMANTIC PRODUCT 1003,3. so i removed the semantic anti product. still internet is not connecting. what shall i do?
View 1 Replies View Relatedwindows wont let me on the net as i need 2 purchase windows antivirus software but i want a free trial antivirus
View 2 Replies View RelatedWhen I click on my mailbox on my yahoo page, it asks me to sign in, but when I click on sign in nothing happens
View 1 Replies View RelatedI have two networks. One is DSL and the other is Cable network. The cable network have a subnet 192.168.155.? and working as DHCP.It is also using a proxy server. The DSL network is also DHCP through WIN2K3 and ISA also installed i.e. using a proxy.My question is "is it possible to connect these two network through some process or router that the people can use either of them using a single NIC.
View 1 Replies View Relatedmy sky box password was reset and we have now lost the password we haven't got the gateway one ether
View 1 Replies View RelatedThe building Im in currently has Broadband fitted but was at a very low speed, I phoned my provider (SKY) who boosted the line but said we should be getting full speed as we are really close to the exchange.I live in a large building with 5 other people all using the net/xboxes. The guy at SKY pointed out that we were maybe not plugged into the main phone port. This was new to me as I assumed all phone lines into a building were evenly matched. I then searched the whole building and found (what I think to be as it has a dividing line like he mentioned on the front plate) the main phone port into the building. Unfortunately its on the very top floor.
View 1 Replies View RelatedI would like to know how broadband Internet and cable tv are turned on and off for things like non payment?,How is that if the Internet is turned off for say non payment one still has full cable services? Or if cable is turned off but Internet is still on one can still receive the lower channels 23 and under? I have been inside of the cable service locations for say the house and my block with a service tech when they replace my bad Cable but I did not see any server points that could turn off individual address! so I am curious asto how all of this works?
View 2 Replies View RelatedIs possible to put a cap on the users of my wireless naked broadband
View 1 Replies View RelatedIm having problems connecting my broadband to the internet, when I press the "Connect" button here is what pops up;
Quote:
The modem (or other connecting device) is already in use or is not configured properly.I've tried doing;
1. Tried installing the software+driver to other laptops and it works fine.
2. Tried changing different modems and installed the required driver but ends up not able press the "Connect" button at all.
3. Tried Uninstall/Reinstall the software/Driver.
4. Disable/Enable driver from Device Manager.
5. Tried Doing a Recovery system but fortunately the recovery system goes as far back the first time I've tried installing this device.
6. Tried disabling Anti-Virus
7. Tried installing old version of Mobile Partner but it seems like it didnt detect the device and a pop-ups saying "Failed to find Port" when installing Mobile Partner 2.3 .This laptop used this broadband before 1-2 months ago.
How to connect a IBM think pad to broadband
View 1 Replies View Relatednetwork unable to open a perticular siteall settings done it opens in same pc ,with same browser with differnt ispi tried all solutions given above
View 2 Replies View RelatedLimited OR No Connectivity.
View 1 Replies View RelatedI have received emails in my inbox to say that emails i have sent have been returned but they are in chinese and I haven't sent them.
View 2 Replies View RelatedReformatted My HDD now I have no LAN internet on MS XP.
View 2 Replies View Relatedhow do i check c disc for error on start up i get a blue page saying disc c errors cancelled i want to resume scan tride run chkdsk but i dont no how to place the f parameter to clear errors it also states i must be administrater baffled
View 2 Replies View Related
