Cabling / Cards :: Linksys E3200 Does Not Print Using USB Port
Jan 4, 2012
I have a Linksys E3200 router with a USB port on the device. I have connected an Epson Stylus Photo R380 printer directly to the port. I have an iMac 27� connected to it by wireless. I have a PC workstation connected to it by cable. I have 2 laptops connected by wireless.I downloaded the Cisco Connect for the PC and 2 laptops. The PC works great due to being connected by direct cable. The 2 laptops will not recognize the printer connected to the router. For the laptops, I click on Add Device, Printer in your Home, USB printer (it says connect a printer to the USB port on your router), I wait while it checks for drivers, it finds the printer and when I print a test page, I get nothing but the printing error. I can connect the printer to the laptop and it prints just fine.
I downloaded the Ciscon Connect for Mac. Loaded it and it went through the setting up my router. Congratulations! I am now connected to the Internet. Click on Computers and devices to add the printer. Well, my options are Computer, Wireless printer (where is the USB printer option that is shown for the PC), Other wireless devices or USB storage. Well my first choice would be Wireless printer. Next screen is Connecting a wireless printer showing the network information. Click next and wait. Well, it says a wireless printer is not found. I click Finish to get back to the Computers and Devices to make another selection, as in computer. Select Connect Manually using my wireless settings. Another box saying it is connecting a device and gives the network information. Again I wait! It says device not found.
View 12 Replies
ADVERTISEMENT
Feb 22, 2012
I have my boss's (president of the company) laptop, wired LAN port, setup with a static ip so his laptop will bypass his company's web filter, and was going to let him use the wireless for home and travel. However, what if he needs to use his LAN port on a different network that doesn't support the ip's of our company's network? I need to see if there is a way, utility, or something that can be done to allow him to have a static ip assigned to that port and use DHCP (for when he is on other networks) so he can bypass the web filter.
I have a rule on the FW to allow his static ip to bypass the web filter. I have tried the alternate configuration inside XP and editing the registry to assign that nic dual ips, but I still get blocked on the filtered webpages. For now I have just emailed him the steps on how to switch it manually.
View 4 Replies
View Related
Mar 5, 2012
I was having a cleanup of the desk and unplugged the cable shortly, and after plugging it back in it could no longer find any connection. The only way I seem to be able to get connected to the internet now is to run a cable to my ethernet switch, and then onwards to my computer itself. Even when doing this the net seems to be very slow, won't connect through Chrome etc or just flat out won't connect.
View 5 Replies
View Related
Dec 14, 2011
I have an old 2007 model Toshiba HD LCD television. It does not have a USB port, but it does have a connection for RJ45. I want to convert this to a USB port, Is there a converter/connector for this purpose?
View 3 Replies
View Related
Jan 5, 2012
I need to connect to the console port on a cisco firewall, an rj-45 connector. The cable is a rj-45 at one end and a serial on the other. My PC has no serial port and I am unable to use the provided cable to connect to the firewall appliance. Is there software that can allow serial over my PC's Ethernet? I really don't have time to order a serial card for my PC.
View 1 Replies
View Related
Jan 24, 2012
I just picked up the E3200 and love it. This morning I hooked up my printer via the USB. Everything went smooth until I tried to print something. I thought nothing was happening, but I let it sit for a while. While I was waiting, I was messing around with my network setting in windows. I realized that my network had been set to 'work' for some reason, so I changed it to 'home'. As soon as I did, my printer spit out my test page. (probably 5 min after sending the doc.) I don't know if it was just coincidence or what, so I sent another page and nothing happened (yet).
Is this common to take that long? Is there a way to speed this up?
View 3 Replies
View Related
Aug 30, 2012
How can I set up iphone 4 to print using a router model E 3200,to the printer model canon MP520 via USB.
View 2 Replies
View Related
May 30, 2011
i have a Dell inspiron 1520, the ethernet port has stopped working- no lights when cable connected. this was fine and then just stopped, it is used to connect to hub from time to time when wifi goes down. have tried 3 different cables, no joy, these all work in another laptop. No issues shown in control panel/ hardware. Have downloaded driver from Dell site, still nothing.
View 1 Replies
View Related
Mar 10, 2012
E3200 firmware 1.0.03 build 9. HP 1012 attached to USB port of the router. On a PC with Win7, Print Preview hangs in all applications. Print... also hangs in all applications. Reboot, re-installation of print driver, change default printer do not fix.
View 2 Replies
View Related
May 28, 2012
I have a problem to install linksys router driver to my win7. It crash on 13 or 14%. It say's that app crashers. What i have to do?
View 3 Replies
View Related
Jul 7, 2011
I bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router.the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed.
[code]...
View 3 Replies
View Related
Jul 12, 2011
I just bout a Linksys WRT120N today as my venerable WRT54G finely died over the weekend. I'm liking the new one, but the cord is too short. I can't move the router from its old spot, so I need a longer power cord.Does Linksys/Cisco sell longer power cords (for a decent price) or would I be better off buying cheap extension cable for it?
View 2 Replies
View Related
Nov 30, 2012
I have a G router, linksys. I am trying to configure a TiVo N adapter to this router. I have connected the adapter, via an either net connection, to my computer. I have taken the computer off my wireless network. I have opened Explorer and entered the address of the adapter per the TiVo instruction manual. There is supposed to be a setup wizard in the adapter that will start and take me thru the setup of the adapter to my network.
View 3 Replies
View Related
Dec 23, 2012
I am using my Iphone 5 as a personal hotspot at home. It gets LTE so my speed is very fast as compared to satellite service from HughesNet. My laptop downloads at 12 mbs and uploads at 5 mbs versus satellite which is about 1 mbs. However, I installed a Linksys N300 usb adapter on my wife's workstation and it is actually slower than 1 mbs. The workstation is about 4 years old running on Vista. I have tried the usb adapter in all four usb slots with no change in performance.
View 3 Replies
View Related
Jun 2, 2011
do airport cards built in to ibook g4 laptops connect to linksys wifi networks?
View 2 Replies
View Related
Feb 6, 2012
I have a western digital USB 2tb drive. It works great on my intranet (my laptops and other devices can access it). I have a sticky Ip address and would like to be able to access my drive from my work, but I don't know how to set up or if it can be set up to work. Can the USB be port forwarded? I have the E3200 router, Windows 7 OS (if needed)
View 4 Replies
View Related
Oct 10, 2011
What the USB version is for the E3200 USB Port? Possible answers would be version 1, 2 or 3.
View 1 Replies
View Related
Sep 8, 2012
I've got on-board LAN but I don't know how to use it. Am I meant to be able to surf the internet just like that if i have got on-board LAN???
View 3 Replies
View Related
Jun 27, 2011
My Internet is down. I appear to be getting power from the modem as all the lights are lit up. I have a wireless router. On my desktop I clicked on the Network icon and it said "3WIRE***" is in range but requires a Network Key (also called a WEP Key or WPA Key)? Could this be the problem? I've never had to enter a password to access my internet before. Do you know how I can find (or reset) my password? It's a D-Link router.
View 2 Replies
View Related
Apr 29, 2012
My hard drive crashed and had to reinstall my OS using manufacturers disk now everything works but the internet, the integrated ethernet card is not listed under network adapters in the device manager, its a clean install of windows xp media center edition 2005 sp2, the device manager shows no drivers missing.
View 5 Replies
View Related
Sep 17, 2012
i am using win7 64 bit on dell n5110 and my lan is not working properly. it wont even detect the cable . when i plug in the cable its like nothing happened. but when i uninstall and reinstall the driver, it sometimes resolves the issue. but i have to do this every time.
View 3 Replies
View Related
Aug 1, 2012
I have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.
View 3 Replies
View Related
Jul 6, 2012
I have network: 20 PC's conected to a switch (ordinary switch), from switch to a router (for DHCP and internet conection), Router is connected to a cable modem.
Lately an issue arised. One PC started having problem witch connection (PC is windows 7, up to date). PC instead of 192 addres is getting 169 (i need to highlight it is a problem with only one PC). That means the PC is connected to the Router but it is not getting proper IP addres. After changig the addres to static the connection ws fine for few days and then in networc connection icon (botom right) it came up with 'unidentified network' message. I changed the patchleeds, even changed the connection with known working line (from outlet to patchpanel) and the connection was coming and going. Then I changed network card with the same resoult. I noticed strange thing: While the IP is 169 or when 'unid net' when I unplug the cable from outlet then plug back and do so couple times in one moment the connection is back and stable but only for some period of time. Cables had been re terminated with new jacks and at the patch panel. Drivers for network card are up to date.
Why is the connection coming and going?
View 3 Replies
View Related
Nov 3, 2011
I'm currently volunteering at a children's group near me. They've just moved offices and are wanting a computer network in place. I have quite a bit of experience with hardware and software troubleshooting, but anything past the server is beyond me.They have a telecommunications box, as many places do, and the box has a set of patch boxes that are, according to the telecommunications people, plugged in and good to go. Each office has tunnelling on the wall with network sockets, again the norm.
View 4 Replies
View Related
Jun 23, 2012
I have found a great application that allows your PC to become a hotspot. It can also protect the wi-fi. Now remember whatever its your backend on the PC is what kind of network and speed you get such as, if my desktop connected through ethernet and I install the virtual router on the desktop than my laptop can connect to it depending on my Wi-Fi adapter on it. It could be B/G/N. B and G gives 54MBPS and N gives me 65MBPS.
View 1 Replies
View Related
Jun 6, 2012
Can I use ONE wireless usb adapter for two computers? Of course not at the same time but I was wondering if it is possible? Also, do I need to have the disc to install it or will the 2nd computer I want to use the wireless usb adapter for prompt me to install the software when I put it in the usb drive? I have misplaced the cd the usb adapter came with which is why I am askinit is a laptop and I know I can use ad hoc but I am trying to set up wireless on that laptop without ad hoc.
View 2 Replies
View Related
Mar 8, 2012
my acer cannot detect any wifi and also dont have network adapter
View 1 Replies
View Related
Jul 19, 2011
I have this phone that was working fine until a friend moved a desk and positioned on top of the cable the goes from the phone to the jack, he did it without knowing it.So we took the cable we went to the store a bought a cable for phone with only one pair of wire, we connected it and it did not get any line tone.I did notice the old cable have two pair of wire.But this is an office phone with two line number so at least one should be working right? I just realize this now.
View 6 Replies
View Related
Oct 1, 2011
A few weeks ago, i noticed that my desktop was unable to access the internet, even though it shows that it is connected. i eventually decided taht it must have been a hardware issue, so i bought a new motherboard. after installing the motherboard, an a fresh installation on Windows, i saw after the drivers were installed that the same thing was happening. I pinged sites, and i got no losses on data. i also did a tracer, and it showed me that it is in fact connecting.
I noticed that when I connect the pc to the network(it is always via cable) it recognizes the network as "network", whereas if i use the same connection for my laptop, it brings up the network as "NETGEAR", which is, in fact, my network's name.
View 12 Replies
View Related
May 7, 2011
I just need to add new connectors and I'm good to go. The PCs have cabinets with Ethernet sockets in them and these will also need re-wiring with a RJ45 jack then a faceplate mounting as they are totally bare at the minute.Also, I think I need to learn this as a whole, it will become a regular thing, do I need the following tools to do the basics of cabling ?RJ45 Network Crimp Tool 10 Boots & Ends Crimping Kit Play.com - Buy RJ45 Network Crimp Tool 10 Boots & Ends Crimping Kit online at Play.com and read reviews. Free delivery to UK and Europe!|cat:3516420|prd:3516420[CODE]
View 5 Replies
View Related
Aug 24, 2011
i have 2 laptop with wifi and ethernet and a pc with ethernet. so can i connet these 3 together in this condition: first laptop to second laptop with wifi, and second laptop to pc with wire. so i can play game 3 together or connect internet all to one internet and etc...can the second laptop be server?i dont have hub, router and adapter. i have only cable.
View 3 Replies
View Related
Jan 13, 2013
I'm installing a wired network in the office, going to upgrade from a cat 5 to a cat 6. My question is cat 6 cables clipped same as cat 5 using same rj45 clips? And is coloring same, am going wg-g wo-b wb-o wbr-br.
View 1 Replies
View Related
Jul 14, 2011
I want to add a new phone line to a small office in a hotel. They have avaya phone system and they are currently using 6 or 7 phone lines. From the avaya wires are run to the 66 block and from there to the outlets. So i think i can connect a cable from the avaya to the 66 block and it automaticaly give an extension number, but how do i add a phone line number to that connection?
View 5 Replies
View Related
