Cannot Add A Wireless Connection
Aug 22, 2012
The problem originally started when I went to connect to a Wireless Network at a Hotel. It just crashed everytime I hit Connect. I also tried to Add the wireless network under Manage Wireless Networks, everytime I hit Add it doesn't do anything! I deleted my saved networks (my home wifi) thinking it would connect but it did nothing. Now I am back Home and I have the same issue! It Won't connect and won't let me Add a preferred wireless network. My Wireless is turned on. I checked the Drivers are updated and had Windows restore to a previous setting (or whatever you call that) This computer is less then 3 months old!
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersOwner>IPCONFIG /ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : Owner-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
View 4 Replies
ADVERTISEMENT
Nov 15, 2012
I have an Acer 7750G, running Windows 7,connected to our home network using a Dynex router. At the moment this is the only laptop in the house that is having problems with connectivity. Starting yesterday, it only connects intermittently. When I run diagnostics, it says the following problems have been fixed but it either solves the problem for a few minutes only or not at all: "Problem with wireless adapter or access point" or "Default gateway is not available".
IPV6 connectivity also shows 'no internet access' and sometimes IPV4 reports no internet. I've unplugged and rebooted the modem and router a few times but that hasn't solved the problem.
Edit: I ran troubleshoot again, and it says the following issue is not fixed: "Wireless Network Connection 2 does not have a valid IP configuration".
View 14 Replies
View Related
Mar 21, 2011
I just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
View 9 Replies
View Related
Jan 20, 2013
After connecting to the internet on my laptop, the internet connection will work great for 10 minutes or less than it slows down drastically or essentially not working at all. If I disconnect and reconnect it will work again but just for a short amount of time. The wireless connection works great on iPod, IPhone, and tablet. Downloaded Kaspersky Antivirus which said it fixed some viruses but internet got worse after that. Tried restoring the computer to factory settings and the internet stays connected for what seem a few minutes longer.
View 3 Replies
View Related
Feb 3, 2011
I have a Cisco 3725 running IOS 12.3. I have three WAN connections (2 x 100Mb and 1 x 2Mb serial) and I need to replace the 2Mb serial connection with a further 100Mb connection. However, I have not got any spare 100Mb sockets.My plan is to use a switch that supports VLANs, connect the three WAN connections to the switch, each in their own VLAN, then connect the switch to one port on the router, configuring the switch port as a trunk (so that it passes all three VLANs across the link) and configuring the router so that for that single Ethernet interface, it has three subinterfaces each configured for a VLAN that matches the VLAN used for the corresponding WAN connection.
I am a bit rusty on my IOS so I wanted to run this all past the community for feedback. [code] Any thoughts on whether or not that will work? Are there any commands from the original interface configurations that I CANNOT use when moving them to a subinterface? I'm thinking that the speed & duplex commands need to be removed?
View 4 Replies
View Related
Dec 18, 2011
We're getting "Connaction Timeout / Connection Failure" error messages several time per day. Here is our setup:
Verizon FiOS Internet (ONT Box) --> Cisco ASA 5505 --> EdgeMarc 4500 Router --> Cisco 300-24G Switch --> Dell PE1950 Servers
From past few months, we keep getting Connection Timeout and Connection Failure error messages in our vendor application which connects to SQL Server 2005. Also Terminal Server 2003 keep disconnecting for every few hours.After several days of troubleshooting, we come to know that this Cisco ASA 5500 is not working properly. When I access the ASDM, it shows several warning messages.I know there is a setting option to configure TimeOut, but is there anyway to test and track the ASA 5500 regarding this Timeout issues?
View 3 Replies
View Related
Jul 12, 2011
I have a Packard Bell Laptop using Windows XP OS and doesn't have Wireless Connection. So long ago i bought a Linksys by Cisco Wireless-G Notebook Adapter WPC54G v.1.2 but didn't have time to set it up or use it for travelling conditions. A couple years later when i came back to check on the laptop, i noticed that i lost the setup CD. So i went on the Linksys website and looked for the driver the download. On the back of the Adapter(card) it says it is version 1.2. But this version is unavailable on the Linksys Website. I could only find v.1, 2,3,3.1 and 7. v.1 gives a driver of v3.1 etc... AND NOT VICE-VERSA.So first when i inserted the card into the slot , the PC didnt detect it. It only detected it rarely if i insert another driver (eg: USB..). And so a window would pop up to install but i didnt know what to do there. When i downloaded the v.1 driver from the website and installed it, it seemed not the detect the card either, it would just say searching for wireless, but that's it. It would keep searching for hours even when im next to the router.finally, only the Power led light on the card is lit up but not the "Link" led.
View 1 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
Apr 20, 2012
I get frequest Airport Express wireless connection drop and reconnect with my replacement e4200v2 running the latest firmware. I have it connected the 5Ghz band and set to channel 161.
View 9 Replies
View Related
Feb 25, 2013
For the last 4 years I’ve been using the Linksys Router, model WRT150N V. 1.1 and never had any problems—until now.Yesterday I noticed that my wireless devices (i.e., two computers, tablet and Internet radio) either don’t work at all (the Internet radio) or the pages load extremely slowly—for example, the tablet has become, for all intents and purposes, unusable. Since my ‘main’ computer is connected directly to my cable internet, I know that there is nothing wrong with the Internet connection itself, only with wireless connection.I disconnected the Linksys Router for 2 minutes and reconnected it, but to no avail. I know that I have not made any changes to any software/hardware that might affect the speed.Since I also happen to have access to another wireless Internet connection (a different provider), I connected to that network and all my wireless devices were working perfectly. Therefore, I think the problem must be with the router. I am using Windows XP (on the main computer, where the router and Internet cable are attached).
View 5 Replies
View Related
Mar 18, 2011
I have a Linksys WUSB54G version 4 adapter.My computer is running Windows XP, Service Pack 3, which is automatically updated at all times. I've been using the adapter for a year with no problems.
Suddenly, it's started loosing the connection to the Linksys router and locking up my computer so only a hard re-boot power-down will work.When it comes back up, some or all of my cookies are lost.
I've run several different security packages but no virus or other issues have been found.I've uninstalled the adapter and reinstalled it.Last time, following something I read on this site, I installed it without the Linksys software, just the drivers.
View 6 Replies
View Related
Jan 7, 2011
I have a Netgear CGD24G Wireless Gateway and a Gateway MA8 laptop with after-market Windows 7 (Vista got a virus, went ahead and upgraded.)Now, when I download 100 MB files on my Xbox 360 (Which is wired to the modem) it will be downloaded in a couple minutes, or less. The other computers in my house (There are plenty, and even more that come and go.) get a blazing internet connection, and most of them are wireless.Now this computer, which had an extremely quick connection as well all of a sudden dropped off, while the rest of the computers remain fast.I've gone to Speedtest.net before and after this occurred and my speed before was around 12 mb/s, and one time around 4 AM was even upward of 25 mb/s, all of these tests were performed multiple times on different server locations. I JUST did the speedtest, and it came back with .4 mb/s, and the UL speed was 2.0. I honestly can't remember what I averaged with it prior to the problem, but it was definitely higher as well
View 5 Replies
View Related
Mar 18, 2011
I am currently having problem Enabling my wireless network connection by using AE1000
My system info are as follow
p4p800-e deluxe (mainboard) intel pentium 4 1gb Ram Window 7 32 Bit Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller Intel 82801EB USB2 Enhanced Host controller - 24DD (USB 2.0) ZoneAlarm(firewall)
After intalling AE1000 Driver, I was unable to connect to internet and Wireless network connection appeared disabled in my Network Connections folder. However it is shown to be Enabled in my Device manager screen. no matter what I do, I am unable to enable the connection and connect to internet (when tryiing to enable the connection, a enabling screen pops up, and times out. device still shown to be disabled/grey).
I made the following attempt trying to get this fixed.
uninstalling the deivce and reinstalling it. (doesnt work) uninstalling the device, restart and have the windows update install the device (the deviced was installed. however I am still not able to enable it) Disable & Enable TCP/IPv4 & TCP/IPv6 (doesnt work) uninstalling local Area connection and use wireless to connect (doesnt work) download driver from websit, and install it manually. (does not work) connecting thou CD. I was given a msg telling me to disable my 'other' wireless manager and use the windows wireless manager to connect (i have no idea i had 'Other' Wireless manager >.>) testing whither or not the same adapter works on another PC (it works...) Testing wither or not my router is not working... (well.. im typing right now... so it works...)
View 3 Replies
View Related
Dec 25, 2012
I currently have a Linksys E1200 router and I am getting anywhere from .3-.5 of a megabit per second download speed while upload speed ranges from 2-5 Mbps. This is very strange to me as I have never seen a connection this slow or one that had a higher upload speed than download speed.
View 7 Replies
View Related
May 7, 2012
I upgraded my Linksys from 160n router to 4200V2 router. I configured 3 wireless Linksys webcams and they work fine. After 24hrs they i cannnot connect the via HTTP and webcames IP addresses disapear from the DHCP client table. If reboot the webcames the it works fine for next 24hrs. I did not make any modification to any settings and the setting looks just like i had on the 160N router
View 1 Replies
View Related
May 10, 2013
My WRT160N V3 halves my connection speed (5mbps to 2.7)with both wired and wireless. I have tried changing a lot of settings.
View 4 Replies
View Related
May 19, 2008
I have a WRT160N with one desktop connected via a lans cable, another desktop connected wireless via WUSB300N and a Laptop connected wireless via WPC600N.
View 6 Replies
View Related
Dec 29, 2011
If I get a new wireless router that is N and attach it to my desktop computer, will my laptop which has a G wireless card in it be able to work without any modification? I thought I read that N is downward compatible with B and G cards, but then I saw some kind of network adapter that is put in the USB and wondered if I'd have to do that with the laptop. I'm leaning towards a E3200 right now.
View 2 Replies
View Related
Feb 27, 2013
Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : wind infostrada
TD-W8970 Wireless connection problems|
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Wind Infostrada
That's a wonderful router on the paper! Really it has some problems with the wireless connection and the dhcp server. After 2 days of i must forced to reset the router because it refuse any wireless connection while the internet browsing on the other pc connected via ethernet ARJ45 is very slow.To complete the scenario the router doesn't allow any acces to his console page ..so what's the problem?
I try to change any channel for the wireless without no positive result.I bought it on amazon but if this situation will continue without any solution from tp-link i will forced to send it back with a totally negative feedback on the product.
View 5 Replies
View Related
Mar 26, 2013
I have a Cisco WRT120N Router and a Cisco Valet AM10 wireless adapter. Almost every time the computer reboots, I loose my network and I have to redo the AM10 setup. The AM10 is the only device that loses the connection, my lap top and printer do not lose the connection.
Problem 2: Everytime I upplug and replug the AM10 a window pops up saying I need to check the drive for errors but none
are found.
Problem 3: I downloaded the AM10 install program, Downloadable.Setup.AM10.1.2.10148.2. It does not work. If I try to run it Iget an error message that the setup canot be completed and to call in for support.
Problem 4: When I can get it working is shows that it is Wireless Connection 5. Why 5 and not 1? Where are the other 4?
<script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>
View 5 Replies
View Related
Aug 4, 2012
I haven't changed anything apart from the SSID names so I can choose which device has access to which band 2.4 or 5ghz.I've come across an issue with the wireless and it drops connection randomly. I have to then disable and enable wireless adaptor on my laptop to connect again.I have read reports of allot of people having this issue however the majority of the issues were over a year ago (2011). Am I to assume this issue was resolved with a firmware upgrade somewhere which I may of missed? My current firmware is 2.1.38.138880. Is this the most up to date?
View 5 Replies
View Related
Mar 23, 2012
WRT54G2 router has been working great since I got it a year ago. But recently I'm experiencing really slow wireless speed. My normal speed is around 15 Mbps but now it has dropped to about 0.85 - 1.0 Mbps. At first I thought someone might be using my connection without my knowledge so I changed the password but it was still slow. I then changed my wireless channel (I heard that if too many people are on the same channel it can cause interference) and it worked. However, a little bit later (sometimes a few hours and sometimes a few days) my connection would become slow again. I have also tried upgrading my firmware but no luck.
View 3 Replies
View Related
Aug 8, 2012
I have a Linksys WRT54gX2. When I make a wired connection from my modem to my computer (Vista - latest SP) I get a connection to the internet on my computer. When I run a network cord from the modem to the wireless router and then a network cord to the computer, two things happen:I do not get a connection to the internet on my computer.With laptops and iPods that are trying to connect wirelessly, I can see that the wireless signal exists, and the devices can connect to the signal, but no internet connection passes through. There are no firmware updates that I can find for this device, I have powered the router on/off for 30 seconds, and I have used the reset button.
View 1 Replies
View Related
Apr 14, 2013
Region : Ireland
Model : TD-W8980
Hardware Version : V1
Firmware Version : 0.6.0 0.6 v000 build 130303 rel. 38108n
ISP : Eircom
Bought this adsl router on Friday and since then I have been experiencing random frequent wireless dropouts, router appears to reboot at this point too, Internet drops out too. Wireless drops as I hear the beep from my airplay speaker reconnecting. Any one have these issues too, tired changing channels, then back to auto again, still no joy.
View 4 Replies
View Related
Aug 9, 2011
I'm running Windows 7 64bit and I have sucessfully configured my wireless print server (Linksys WPSM54G) to work with my computer and our HP DesignJet 500ps. I have been able to print several sets of drawings without issue, however if the plotter is inactive for an extended period of time (1 hour +/-) the wireless print server loses connection with our router. At the same time the print server loses connection, an associate in our office with a wireless connection to his computer also loses connection to the router. A simple power cycle of the router and print server restores the wireless connection
I chatted with Linksys online tech support and they confirmed that I had the most recent firmware in both the router and print server and had me reconfigure some of the wireless settings on the router. All was good until about an hour ago when I tried to plot and discovered that the print server had lost it's connection to the router and my associate had also lost his wireless connection.
What's the deal here? I feel as though the root cause of this issue is related to the wireless router rather than the print server as my associate was periodically losing connectivity to the wireless router before installing the print server.
View 3 Replies
View Related
Oct 2, 2011
I am running 5508 controller with version 7.0 and 1142N access points.. I am facing a problem on user connectivity.
Wireless Users are getting frequent connection and disconnection. These users are not getting connected to the access point nearby although this access point is up and running. I have tried reducing the power level, configured the AP after resetting it.
View 2 Replies
View Related
Mar 18, 2012
I have a E4200v2 and im getting wireless connection issues. I have updated to the lastest firmware and have checked all my wireless settings. I dont use usb storeage. I have 1 laptop using 5G, my iphone using 2G and my wife mac using also 2G.. the problem is that, once we stop using the 2G connection (leave it overnight), it just dies the next day.. it wont connect, i double check the password and it wont connect. But the 5G connection is fine.. Do i have a break E4200v2? or anyway of fixing this?
View 2 Replies
View Related
Nov 3, 2011
ip - Comcast.....
tower card - Creatix CTX404 WLAN 802.11b.....
Router - Netgear WNR1000v2 (supplied by Comcast)
Modem - RCA - DCM 325 (Also supplied by Comcast)
Window XP Pro w/SP3
Security - WPA-PSK
I'm getting in no special order
a "validating identity" or "authorization failed" or "unable to find a certificate to log you onto the network" or "limited or no connectivity...etc..."
I have removed the check in front of the enable box in the Authorization Tab. The only difference I have noticed is that the icon in the task bar instead of a white on red X I now get a Black on yellow triangle...but still no connection...all this after a couple of days worth of **bleep**
View 2 Replies
View Related
Nov 26, 2012
I have a problem with my computer connections.When I plug in a network cable to access LAN, a wireless Internet connection gets disconnected.When I unplug the cable internet connection through wireless comes up.Some computers can support both connections cable for LAN and wireless for Internet.Other computers do not support both connections.
View 7 Replies
View Related
Jun 25, 2012
I am trying to confgure a VPN connection on a Cisco ASA 5505, and I am supposed to translate the inside network from 10.200 76.0 to host 10.1.4.204, and then from that scheme establish a VPN with the host 66.179.80.108 on network 192.168.50.0/24. I was told that this Cisco ASA appliace would be able to translate the network address as a mask in order to make the necessary connection with the other site connection.
View 6 Replies
View Related
Jan 12, 2012
I've tried two different brands of wireless network adapter now: a Netgear and a Belkin. They've both had the same issue.I'm running Windows 7, and the network connection will just randomly drop out. If I unplug and plug in the adapter, the network will reappear and it will connect to the internet just fine, until the next time it drops out.
View 2 Replies
View Related
Jan 31, 2013
is there a way connecting the HP Color Laser jet CM1312nfi MFP totally wireless without any cable? how can it get the IP wireless?
View 1 Replies
View Related
Jan 16, 2012
I have got a new laptop from work and I cannot get our home wireless to connect. It works on our phones and we can use our neighbours laptop with it but just not ours. It is showing that our wireless is an option but we cannot get onto the internet, page cannot be found/no connection messages come up!
View 2 Replies
View Related
Apr 19, 2012
I'm trying to share my internet connection to another PC via wireless device.Which technique can i use for it.Topo:-Internet <-> PC(A) <--> WD (B) <--> WD (C) <--> PC(D)PC = Windows XP (OS)WD = Wireless device Access Point / BridgeIn the above topology, i need to share my internet connection from (A) PC to (B) PC through wireless device, I have plan to establish the internet sharing between two PC, In which mode Access Point/ Bridge mode is adequate for this wireless device to make connection and internet sharing between the PC
View 5 Replies
View Related
