Cannot Connect To The DNS Server Error
Feb 8, 2012
So I'm having issues with connecting to the internet. I'm connected to the network but cannot browse the internet or play online games. Currently I'm on my housemates laptop. None of my house mates are having issues. My computer is a laptop and connects to the internet wirelessly. I don't have a cable to try connecting straight to the router unfortunately.
Last night my internet provider (Time Warner) did an update that caused all their networks to change their names/passwords. My house mate got the new name and password and when I used it it worked fine for several hours. While in the middle of a game, my internet and my housemates internet stopped working for no reason. Theirs are fine now, mine is still having issues.
I have reset the router, restarted my computer, and looked into some DNS stuff. I've done the commands ipconfig /flushdns along with ipconfig /release then ipconfig /renew. I also changed my preferred DNS server to 8.8.8.8 for my Internet Protocol (TCP/IPv4) and that did not work. (edit: also tried 208.67.222.222 & 208.67.220.220. No luck there either)
I've tried turning off my firewalls and connecting but that doesn't work.
View 14 Replies
ADVERTISEMENT
Aug 6, 2012
Sometimes, either browsing from my computer, iPad or iPhone, I sometimes get a "can't connect to server" error, and it's not just a few forums here and there, it is a lot of them. But if I give them 5 or 10 minutes they will come. Imkmow that this isn't a normal up issue with sites servers actually being down. I thought it was a Google chrome issue, but it's been happening on safari. It hasn't started till we switched our Internet plan to 3mbps and a new router.
View 19 Replies
View Related
Apr 20, 2011
i'm currently studying at a college which has a website with a student intranet that is available to log in from any computer. So far it has been working well and I can log in on my home laptop and upload documents and look at presentations etc. Today for no reason when I try and log in I get the message Error Code 500: Internal Server Error and the webpage does no appear.I have had no problems previously and this has only happened today and yesterday, I went down to the college and accessed the website fine from the computers in the library but still no joy from my home computer.
View 1 Replies
View Related
Aug 11, 2012
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 925 Processor, AMD64 Family 16 Model 4 Stepping 2
Processor Count: 4
RAM: 8183 Mb
Graphics Card: ATI Radeon HD 4350, 512 Mb
Hard Drives: C: Total - 942176 MB, Free - 888263 MB; D: Total - 11394 MB, Free - 1645 MB;
Motherboard: FOXCONN, ALOE
Antivirus: Norton 360, Updated and Enabled
Farbar Service Scanner Version: 06-08-2012
Ran by Jennifer (administrator) on 11-08-2012 at 09:25:16
Running from "C:UsersJenniferDownloads"
Microsoft Windows 7 Home Premium Service Pack 1 (X64)
Boot Mode: Normal
[code].....
View 5 Replies
View Related
Jul 20, 2012
my laptop sometimes gives a 500 internal server error when I try to go to any website. our other wireless devices such as our phones don't do this while the laptop is.
View 2 Replies
View Related
Aug 7, 2011
I am trying to hook my desktop up to my wireless router via Ethernet cable. The wireless Internet works great and my housemate's laptop works with an Ethernet cable. I have already contacted my service provider but to no avail. I have no idea where to start
View 11 Replies
View Related
Dec 26, 2012
I am using PC to mobile dialer. It was working fine but now I am unable to login to my wowcall account due to error - Unable to register to SIP server.
View 1 Replies
View Related
Apr 23, 2012
My laptop is connected to a router via wifi but it keeps getting a DNS fault. I have another PC linked to the same router via WiFi and that works perfectly all the time. I have the same problem on both google chrome and IE browsers where I just get the message telling me that the DNS look up failed. My internet is still connected as I can dial into my remote CCTV cameras and I can ping website ip addresses. Most times I can just turn off my wireless adapter and turn it back on and it works for another hour or so. But sometimes it wont work all day, unless I start my laptop in safe mode, when it works everytime! I have flushed the DNS cache several times but to no avail.
View 5 Replies
View Related
Aug 3, 2011
It's showing I have connection but when I click the internet icon it reads page cannot be displayed. Cannot find server or DSN error
View 1 Replies
View Related
Jan 30, 2012
My laptop will not connect through my router anymore. I'm getting the message ( Cannot communicate with Primary DNS server (192.168.1.254). It works fine with an ethernet cable. I have a WII that uses the router also and I can watch a Netflix movie on it so the router seems to be working. My desktop computer is working fine through a DSL connection. The laptop is a Gateway and is running Vista.
View 14 Replies
View Related
Feb 27, 2011
A few days Ago we finally got our 24Mbps DSL package and so far it keeps disconnecting every 30 mins (sometimes more, sometimes less). The thing is I'm living in some village in Ukraine so there's only one ISP I can choose from and the phone lines here are a piece of crap (I can hear the static, but I can't do anything about it.) Calling the phone company is out of the question as no one here would even think about improving our phone lines (trust me, this place is FAIL). Also, My ISP is bsing me into believing that I'll get 24mbits on some crappy copper wired phone line that makes noise every time you try to use the phone. I'm using a 5 port switch to connect 2 computers to the internet through some so-so modem. The ethernet cables are not cat5 quality either and the phone cable is just some average RJ11 type deal. Now I know the true meaning behind "up to 24mbps downstream and 3 mbps upstream!" which is actually means "10.5mbps down and 0.3mbps up (at max)". Yes, I live more than 2km from the providers. [code]
View 14 Replies
View Related
Feb 25, 2013
Sylvania Smartbook synet7wic-bk cannot get online. It shows my wifi is on, but I do not have a tab for wifi information, to put my info in it.
View 2 Replies
View Related
Jan 15, 2012
I have been trying to connect to the Internet via a wireless connection but keep receiving the above error. None of the Windows solutions resolve the problem. On Google Chrome I see a screen saying 'This web page is not available', and receive 'Error 105: Unable to resolve the server's DNS address'. I cannot access Internet Explorer either.The strange this is that this problem only seems to occur with some wireless networks, as I can connect fine at home. In certain places, however, I am told that I am connected but that accss is 'Local Only', and I cannot open any browsers. I need the problem resolved as soon as possible as I cannot access the internet where I need it most.
View -1 Replies
View Related
Mar 8, 2013
I run a tiny home domain with 1 Windows 2008 R2 server and 2 clients (one for me and one for the hubby). Our server is DC, DNS, and DHCP server (and some other roles). Our clients are both Windows 8 but we use the standalone Chrome installation, version 25.0.1364.152 m.The problem is that on my Windows 8 client, every once in a while (not the same time period each time, but roughly every 6-15 days) I get the error in the title on one site when using Chrome only, which is Gmail. I can access and resolve Google and every other site, and my DNS server itself can resolve Gmail, but not until I flush the DNS of my local client will Gmail work again. Also strangely, I have left it on the morning when it happened before, and when I came home from work it had sorted itself out. The other client, hubby's Win 8 PC, also sometimes gets this issue, but not nearly as often as I do. Flushing the local DNS cache resolves it for him as well.
I used my ISP's DNS servers for forwarding initially, but changed to Google's 8.8.8.8 and 8.8.4.4 when this kept happening, and it didn't seem to make a difference. I've enabled scavenging and aging and all sorts and those are faithfully renewing themselves as expected, but as the problem only lies on the clients and never the server, I'm quite lost as to what to try next.I've had a look on the Chrome forums (gulp) and nothing seems to be as specific as this fault
View 1 Replies
View Related
Feb 8, 2013
Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.
View 1 Replies
View Related
Oct 25, 2011
I use PIX 8.0(4) and ACS 4.2 for VPN authentication. I got error as below even I'm able to ping to ACS server from PIX
RADIUS_SENT erver response timeout
RADIUS_DELETE
ERROR: Authentication Server not responding: No error
I tested aaa command from PIX and check configure on ACS (key and IP address) include restart ACS. The output still timeout and not responding from server.
PIX config:
=========
aaa-server AAA-VPN protocol radius
aaa-server AAA-VPN (MANAGEMENT) host 172.20.0.9
key xxxxxxx
tunnel-group CGS-DR type remote-access
tunnel-group CGS-DR general-attributes
address-pool VPN-POOL
authentication-server-group AAA-VPN LOCAL
default-group-policy GR-CGS
View 2 Replies
View Related
Feb 23, 2011
i'm getting "general network error" while accessing application from server..
client machine: Windows 7
server machine: Windows 2008 server
Switch : 24 port unmanaged D-Link switch ..
network cable: CAT-5 cable.
View 1 Replies
View Related
Mar 22, 2011
I have a Sylvania 7" mini Netbook and I am connected to my wireless modem. My problem is that I am not able to browse the web any anyway. I keep getting cannot find server or DNS Error Internet Explorer.
View 1 Replies
View Related
Jul 21, 2011
I can't seem to get the browser to properly show spacing.So I was browsing the internet normally, then all of the sudden, I'm disconnected. When I reconnected, I was able to access the network, but unable to connect to the internet. After attempting to diagnose the issue, I got the "There may be a problem with your Domain Name Server Configuration."can't connect to well known host microsoft.com.
View 9 Replies
View Related
Oct 8, 2011
I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work. Points to note: 1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)
I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.
View 3 Replies
View Related
May 23, 2012
Earlier today I was attempting to do something with my router settings and ended up reading on the internet that I needed to do a hard reset to access my router interface - when I typed in the IP address, it came to a "could not find server" error in the browser. After doing the hard reset (holding down the reset button for 30 seconds) I was able to access the router, and adjust the settings. After doing this though I was no longer able to connect to the internet through the router, although the router is sending out a signal (it says connected to linksys but "no internet connection"). I am currently connected directly to the modem right now using my laptop.
Additional Information:
Router model: WRT45G v.3
ISP: Bellsouth
TL;DR: Did a hard reset on my router, now it's sending out a signal, but no internet. Modem still has internet, as does the router, (the internet button is green).
View 3 Replies
View Related
Apr 4, 2013
Lately, Ive been trying to change my router DNS to OpenDNS. Somehow, after changing it, I couldnt access the router page at 192.168.0.1, getting the error 500 message. I unplugged and plugged the router with no effect. Im using a dlinkddns.com dynamic IP, and have a few ports forwarded for my DVR. The router model is DIR 615. want to change the DNs for speed and filtering purposes.
View 4 Replies
View Related
Nov 30, 2011
I've just recently started to get this error, and I'm not sure why (I have no expierence with routers whatsoever). I have noticed, that whenever this happens though, that my NAT type for my xbox goes strict.
View 4 Replies
View Related
Oct 11, 2011
I have a problem with my router, WRT54G2. I was upgrading my firmware when my computer froze up, so I had to exit. Afterwards, I could not connect to the web based setup page anymore. I did a factory reset and installed it again with Network Magic and set up my wireless key. It is working now however, I cannot get into the web based setup page. Whenever i go to 192.168.1.1 and enter my info, it just says 500 Internal Server Error. I was always able to access this page, now I can't, so I assume it's not working because of the interrupted firmware update. I do alot of mac filtering and I limit the amount of IP addresses my router gives out so if anyone hacks my security key, they still won't be able to connect, so accessing my router setup page is important to me. I have reset (hold down reset button for 30 secs - 1 minute) the router many times and still nothing. I mean, the router still works. My brother and I can still connect with our laptops, I just can't get to the web based setup page.
View 7 Replies
View Related
Apr 5, 2013
Firmware 1.3 introduced a DHCP server.
It seems that I can add a pool for any subnet except the 192.168.1.1/24. I have successfully added a pool for 192.168.0.1/24, 172.16.16.1/24, etc. But when I use the same commands to add a 192.168.1.1/24 pool, I get:
sw(config)#ip dhcp pool network Device sw(config-dhcp)#address low 192.168.1.20 high 192.168.1.250 255.255.255.0 Illegal IP addresses range or subnet configuration Trying to configure a network pool on default IP interface
VLAN 1 IP was changed from default 192.168.1.254 to a static of 192.168.0.1.
View 2 Replies
View Related
Oct 11, 2011
I've got some problem with my Mail Server since I've migrated to an ASA5510.Actually the server is in a DMZ with a private Ip ( 10.x.x.2) and it is translated to a Public IP ( 194.x.x.65).I use these configuration :
static (DMZ,LAN) 194.x.x.65 10.x.x.2 netmask 255.255.255.255 static (DMZ,LAN) 194.x.x.66 10.x.x.3 netmask 255.255.255.255 static (DMZ,WAN) 194.x.x.65 10.x.x.2 netmask 255.255.255.255 static (DMZ,WAN) 194.x.x.66 10.x.x.3 netmask 255.255.255.255 static (LAN,DMZ) 192.168.0.0 192.168.0.0 netmask 255.255.248.0
Some Users received in there mailbox a system administer error message :
Object : Impossible to deliver : test Your message could not be deliver to one or more of its recipients: 421 SMTP connection went away!
When they try to re sent it some times later, message is sent without problem.
View 4 Replies
View Related
Apr 29, 2011
I installed NGS 2.0.2 for wireless guest user management and authentication. I implement webauth via webauth page on wlc deployed.One Branch with a WLC5508 version 7.0 wireless anchor controller is working on the NGS.But now I integrate next branch with WLC4402 version 6.0.188 and the authentication of users at the new branch gets an error, wrong user/password.
I double checked configuration and user/password but I can't find any configuration error. Also stopping and starting of radius service and reboot of NGS still does not work. I tried to debug the radius via web interface and watched for the loggfile and there is still a reject.I also tried the freeradius command radiusd -X but I got an error when starting the radiusd -X.
1.) How can I figure out, if I will get the correct password from my WLC ? Are there any debug options to see more ? e.g. some cli commands, radiustest utilities or how to get the received password from the chap challenge of the debug ?
2.) I have appended a part from my radius loggfile. How can I find the detailed error in the radius log file? Is it correct that the password in the debug file is empty ? raiuds logg line "[radius-user-auth] expand: %{User-Password} -> "
View 3 Replies
View Related
Dec 27, 2011
I'm connected through the router, a few times a day I cannot open web pages, getting error: Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.Skype continues to work. Here are the results of pinging:
Quote:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSri Guru>ipconfig /all[code]....
One technician said that this is the providers problem, but I don't think so. When I restart the modem everything works.I have a Netgear WGR614 v9 router.I use ESET 5 security. Btw, connection drops on all computers connected through the router, so it's not my firewall.
View 3 Replies
View Related
Apr 29, 2013
I am trying to copy IOS from my TFTP server which is on my laptop to cisco 2960 switch
I am able to ping to switch from my laptop, connectivity is fine, tftp server is running
Current Image on Switch --> C2960-LANBASE-MZ.122-25.SEE3.bin --> trying to upgrade to --> c2960-lanbasek9-mz.122-53.SE2
I am getting below error when trying to upgarde IOS:
2960-SW#copy tftp: flash:
Address or name of remote host []? 10.1.x.x
Source filename []? c2960-lanbasek9-mz.122-53.SE2
[Code].....
View 6 Replies
View Related
May 28, 2012
I have an E1200 and am time out and packet loss issues. The internet connection is fine for 30 seconds to five minuets and then everything times out for 15-20 seconds. Although it’s only a minor incontinence to web browsing, it makes playing games and watching videos a nightmare. “Lost connection to server error.” and the like…
I upgraded to a new router, the e1200 I am currently using, from my Tenda 10/100 N. The problems where the same that I am experience currently and the reason I bought it in the firs place.When I directly connect to the cable modem, I have no issues and everything is fine.I have run a trace route and the second hop, (the router to the modem) is the choke point.I have cloned the MAC address.I have updated the firmware and hard reset
I have throttled my MTU to automatic, 1500, and 1472. None making any difference.I have disabled NAT and all that does is kill my internet connection.I have disabled all firewalls router and windows, no change.I replaced the physical wire from the router to the modem.I have disconnected all devices except one computer, and no difference.I ran a DNS trace and I have… non routable local internet address 192.168.1.1 DNS-cac-lb-01.rr.com and DNS-cac-lb-02.rr.com.I am using windows 7 and my ISP is time Warner so-cal.
View 8 Replies
View Related
Feb 11, 2011
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies
View Related
Aug 28, 2012
After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies
View Related
Mar 8, 2011
I can connect to a 877 router via SSL, however when I click on “Start” for Tunnel connection a separate window is opened with a “Website not found 404 error”.
View 2 Replies
View Related
