Cisco :: 4503 How To Clear MAC Address Table By SNMP
Jan 23, 2012I'm looking for a SNMP set command that clear the MAC Address table on a Switch Cisco 4503.
View 3 Replies
ADVERTISEMENT
Cisco :: Getting Mac-address-table Through SNMP On 1811
Jan 26, 2010trying to fetch the equivalent of the mac-address-table on a 1811 with SNMP. I want a mapping between active MACs to a port ifIndex (not a VLAN interface ifIndex).
- I've snmpwalked every MIBs on this device (including all the proprietary MIBs supported by the IOS)
- I've upgraded to latest IOS from the 12.4(24)T series and also tried latest from 12.4(15)T series
- I am aware of the community index (@ sign in read-only community to split per vlan)
- I've exhausted all my google skills
On 29xx, 35xx, we obtain that information using the BRIDGE-MIB, community indexing and the following OID:
1.3.6.1.2.1.17.4.3.1.2 (dot1dTpFdbPort)
ex:
# snmpwalk -v 2c -c public@1 192.168.1.61 1.3.6.1.2.1.17.4.3.1.2
SNMPv2-SMI::mib-2.17.4.3.1.2.0.23.89.208.164.62 = INTEGER: 24
SNMPv2-SMI::mib-2.17.4.3.1.2.0.23.101.255.67.177 = INTEGER: 12
SNMPv2-SMI::mib-2.17.4.3.1.2.0.24.25.113.78.52 = INTEGER: 11
Cisco Switching/Routing :: 2800 / Clear Arp Table Every 5 Seconds?
Feb 19, 2012I am in need to have the arp table cleared every 5 seconds or so on a 2800 router. I was wondering how I might be able to accomplish this.
View 4 Replies View RelatedCisco :: 5500 - SNMP Operation To Device Failed / Sparse Table Not Supported
May 29, 2013I am currently running WCS 7.0.230 I have controllers that are 2500 that are running 7.4.100.60?
My problem is that when I try to add my controller that is a Cisco 5500 running the same 7.4.100.60 I am getting the error SNMP operation to Device failed: Sparse table not supported. Verify that the WCS and WLC versions are compatible and try again.
I have double checked SNMP strings, IP Addressing and everything else I can think of. It just doesn't make sense that I can add a Controller with the same image but different hardware and no the other to the WCS server.
Cisco WAN :: Windows 7 Cannot Obtain An IP Address From 4503 Core Switch
Dec 14, 2011we have Core-Siwtch 4503 in the main building which is connected to another Core 4503-E in another building ,, now our PCs connected to the 4503-E ,,, any XP M/C can pick an Dhcp-ip but and M/C run Win.7 Cannot !!
action taken :
1st we try to connect our win 7 pc in the node which was connected to xp M/C ,, and it didnot take ip from the DHCP . ,, 2
2nd we ensure from the core-switch configuration and its normal with no mistake
3rd trying to use tool from Microsoft Fix-it Center whih name is ( Microsoftfixit 50475 ) which is just .msi file but the problem face us is that this tool donnot accept to run on win 7 cause its made for vista .
4th after some researchs we notic that there is some modifications have to be performed on registery by disabling the dhcp broadcast flag we did it but nothing change yet
5th now we are waiting to perform another action which is Disable the IP Helper service in win 7
Cisco Switches :: Retrieving ARP Table From SF300 Switches Using SNMP?
May 22, 2012I'm setting up an SNMP poller to retrieve the ARP table (ipNetToMediaPhysAddress) from my SF300 switches. I can retrieve the table from SF300-24P and SF300-48P switches running Firmware Version 1.0.0.27, but get garbage for the MAC address when retrieving that same table on the same model switches running Firmware Version 1.1.1.8. Is there an outstanding defect on this code level? How can I retrieve the table showing the IP address to MAC address mappings?
View 1 Replies View RelatedRouters / Switches :: Cannot Repair Ip Address Because Can't Clear Arp Cache
Feb 14, 2011when i try and repair it it comes bk saying cannot repair ip address coz cant clear arp cache
View 1 Replies View RelatedCisco :: Nexus 5K Mac Address-table?
Aug 20, 2012Can someone throw me a bone on what might be occurring here?
View 7 Replies View RelatedCisco Wireless :: MAC Address Table On Wi-Fi Controller WLC4402
Dec 5, 2011has WiFi controller WLC4402 mac address table and can I show it somehow?
View 1 Replies View RelatedCisco Switching/Routing :: 1812 - Mac Address Table
Jan 11, 2012Cisco 1812, Version 12.3(8)YI1..What does "none" mean ?Most of mac adressess in cam has specified interface, but several has none.
View 12 Replies View RelatedCisco Switching/Routing :: 6500 Not Showing Mac Address Table
Apr 8, 2013we have 6500 cisco switch as a backbone switch in universty. When ı want to look mac addres table , it does no show all mac address.ı mean if ı type ;show mac address-table there are not all mac address.
View 3 Replies View RelatedCisco Firewall :: ASA 5505 - Transparent Mode And Mac Address Table
Nov 28, 2011I have an ASA 5505 in transparent mode. The device mac address table is always empty.
show mac-address-table and show mac-learn both come with empty response.
Cisco Switching/Routing :: Timeout For Mac Address Table In 3750E
Dec 6, 2011I have 3750E swiches with IOS v. 12.2(55)SE3. Couple servers connect to ths switch, after ping of IP this servers I can see mac addresses in mac address table.
For instance:
sw1#show mac address-table vlan 20
Mac Address Table
-------------------------------------------
Vlan Mac Address Type Ports(code)
---- ----------- -------- -----
When ip generate traffic to this server this mac address appear in table again on shot time (less than 10 seconds).
Cisco :: LMS 4.2.3 Missing IP Address In User Tracking End Host Table
Feb 27, 2013We are running LMS Prime 4.2.3 on a Softappliance. We have a Cisco Switch behind a Non Cisco Layer-3 Device. In the end host tabe we see only the MAC-Addresses of the host connected to this switch. No IP-Address. The corresponding IP-Addresses are in the ARP-Table of this non Cisco Layer-3 Device. The arp table can also be read by snmp. Is it possible to get the ip address in the UT End Host Table in such an environment?
View 1 Replies View RelatedCisco Switching/Routing :: SW2960G - Server Is Not In Mac Address Table But Can Ping Its IP
Oct 28, 2012I have the switch ============>>>>>
sw2960g============server linux
As u see above , the inetrface Gi0/6 , Gi0/7 are connected directly to linux server by two redundent links .
I mean that Gi0/6 is connected to interface0 in linux server
and Gi0/7 is connect to interface interface1 in linux server
Gi0/6===>vlan 1
Gi0/7===>vlan 2
each interface of linux server has a different ip and different gateway .
Now from switch, I make ping to interface 0 of linux server and i have a reply , every thing is ok but when i type the command :
#sh mac address-table | i Gi0/6
There is no Mac addresses and seems no Mac address relative to Gi0/6, I mean that doesn't it mandatorty to learn the mac address of linux server and write in mac table relative beside interface Gi0/6 ? How I could ping the server but no mac beside Gi0/6 ?
Cisco Switching/Routing :: WS-C6509-V-E / Mac-address-table Synchronize Command
Nov 27, 2011we have cisco WS-C6509-V-E with IOS version 12.2(33)SXI4; s3223_rp_IPSERVICESK9_WAN_M) running on a switch. I am trying to configure the command "mac-address-table synchronize" under global config mode. But when I enter the command Cisco(config)#mac-address-table ?It doesn't show the synchronize option?
View 3 Replies View RelatedCisco Switching/Routing :: 6500 Clarification For Using Mac-address-table Synchronize Command
Jul 12, 2010We want to configure the "mac-address-table synchronize" command on our 6500 series switches to ensure that the CAM tables on our DFCs are in synch with the PFC on the supervisor modules. url...it is recommended that we disable the routed MAC purging with the mac-address-table aging-time 0 routed-mac global configuration command. What is a routed mac entry? Are there any issues with running that mac aging-time command?
We also plan to run this command "mac-address-table aging-time 14400" to keep our ARP and CAM tables on the same aging time to reduce unicast flooding on our network. Can we run this command with the "routed-mac" command above?
Cisco Switching/Routing :: High CPU For Catalyst 4500 K2L2 Address Table R?
May 8, 2011My Catalayst 4507 is reaching up to 82% CPU utilization and I noticed that K2L2 Address Table R is causing the high CPU.
C4507#sh processes cpu | in HiPri|LoPri|CPU utilizationCPU utilization for five seconds: 82%/1%; one minute: 86%; five minutes: 87% 54 350533923 329104616 1065 13.27% 13.84% 13.86% 0 Cat4k Mgmt HiPri 55 1771768520 274992685 6442 59.91% 64.55% 66.04% 0 Cat4k Mgmt LoPri
C4507#sh platform health | in K2L2|%CPuK2L2 Address Table R 2.00 66.35 12 5 100 500 91 82 58 27272:55K2L2 New Static Addr 2.00 0.00 10 0 100 500 0 0 0 0:00K2L2 New Multicast A 2.00 0.00 10 5 100 500 0 0 0 0:18K2L2 Dynamic Address 2.00 0.00 10 5 100 500 0 0 0 0:16K2L2 Vlan Table Revi 2.00 0.00 12 8 100 500 0 0 0 1:22
Cisco Application :: Does 6500 SUP720 / 2T Support MAC Address-Table Move Update Feature
Apr 21, 2013Does 6500 SUP720/2T support MAC Address-Table Move Update Feature?
View 1 Replies View RelatedCisco Switches :: SGE2010 - How To View Table Showing Which MAC Address Is Plugged Into Which Port On Switch
Jul 31, 2011I volunteer at a school who just purchased two 48 port SGE2010 managed switches. I am not a big fan of the web gui and was hoping to see the standard Cisco command prompt instead of the menu-type interface.
Is there a way to view the MAC table showing which MAC address is plugged into which port on the switch? I have been fighting with the menu and the gui for a while now and do not see this anywhere.
Cisco WAN :: WS-SUP720-3B - 2 Full BGP Table - Maximum Routing Table?
Jan 16, 2013In datasheet of WS-SUP720-3B - link- was said that are only supported around 256K routes (fib?rib?).With this value I can't get 2 full bgp - that is around 850K ..
The supervisor is that control this or just memory ? I said this because I have a 7204-npe-g1 whith 2 fullrouting and 1G of and he are ok..
Have DHCP Assign SNMP Address?
Oct 21, 2011I know DHCP can assign more than just address, mask, and gateway. It can also assign a hostname, and DNS. Does anybody know if it can also be used to assign an SNMP address?
View 6 Replies View RelatedCisco Switches :: SF300-24 Snmp Get Mac-address Information Not Available?
Feb 21, 2013Im sitting with a few cisco sf-300 24 switches and i'm trying to get the Mac-addresses the switch have learned from each computer connected to the switch.
View 2 Replies View RelatedCisco Switching/Routing :: Get MAC Address From Switch Ports With SNMP V3?
Feb 1, 2013I have been reading the postings on this site trying to retrieve the MAC address for the client devices (computers, printers) attached to our switches. We have approximately 500 switches and I need to map the mac address to the switch. It appears the OID information is for SNMP v2. We are restricted to using only SNMP v3. I have tried using the Cisco SNMP Object Navigator without any success.
View 2 Replies View RelatedCisco Switching/Routing :: Cannot Find Port Number From MAC Address Using SNMP With 3725
Dec 2, 2012I'm developing a project where I use the SNMP protocol to discover the network. By discovering the network I mean go through all the routers and switches and retrieve the IP routing table from routers and the forwarding table from switches. With the routers I have no problem. For the switches I need to know for each port the MAC addresses and the Vlans. Basically it's use SNMP to find a port number from a MAC address. To do that i followed this tutorial: [URL]
The problem is that I'm using a Cisco 3725 Router with IOS 12.4 (21) and a NM-16ESW module to work as a Switch and when I use the OID .1.3.6.1.2.1.17 corresponding to the BRIDGE-MIB as it follows:
snmpwalk -v2c -c myrouter 10.1.1.5 .1.3.6.1.2.1.17
it returns:
SNMPv2-SMI::mib-2.17.1.1.0 = Hex-STRING: 00 00 00 00 00 00
SNMPv2-SMI::mib-2.17.1.2.0 = INTEGER: 0
SNMPv2-SMI::mib-2.17.1.3.0 = INTEGER: 4
From this I guess there's no information on the router about Vlans or anything. Other thing is that when I use community string indexing it returns a timeout. My theory is that this version doesn't support indexing but I don't know.
how can I get the Port Number from a MAC address from this "switch" (it's a router working as a switch) using SNMP?
SNMP Couldn't Make Router Restrict A Range Of Address Allowed To Use A Community
May 3, 2011I have a XSR-1805 (Version 7.5.0.0) enterasys router here. Got SNMP server to work successfully. The thing is that I couldn't make the router restrict a range of address allowed to use a community. Only 10.1.0.13 is allowed to use SNMP in this case.
View 1 Replies View RelatedCisco WAN :: 4503 - Trunking And 802.1q
Feb 29, 2012I have a Cisco 4503 with a supervisor 6 engine. I want to create a trunk between the router and a switch. when I do :
switch port mode ? Access
Dot1q-Tunnel
Dynamic
Private-v lan
Trunk
I thought I should see :
switch port mode encapsulation dot1q
switch port mode trunk
Am I missing something I do not see where I set the encapsulation.
Cisco :: 4503 - MIBs V1 And V2
Oct 4, 2012I have a doubt regarding MIBs. I dowloads the MIBs for Cisco 4503 for a specific IOS. But the folder is divided by v1 and v2.
What does it mean v1 and v2? The version of SNMP?
So if I enable just SNMP Trap (''snmp-server enable traps.....'') I should use MIBs v1 but if I enable also the number of Retries and Timeout ( ''snmp-server inform retries...'' and ''snmp-server inform timeout...'') I sould use MIBs v2.
Cisco WAN :: 4503 / Non-volatile Memory Has Been Deleted
Mar 21, 2011installing IOS for cisco 4503 e catalyst switch. The base ios image file has been deleted. Installing the ios and from where can I download the ios verison.The device has 2 10 Gig uplinks and I have access to console of the device.when i boot up the device it comes "rommom >"I do have tftp server and i have also configure the IP in fast ethternet mgmt port.
View 2 Replies View RelatedCisco WAN :: 4503 - HSRP Configuration Into Network
Feb 3, 2011I want to run HSRP into my network.i am using two 4503 switch one is main and another one is standby. i configured V LAN into my switch and its running, now i want to configure HSRP. my configure is attach with this mail and my main switch gi2/22 is connect backup switch gi2/22 and all user is connect to both switch as like HSRP network.
I can use Standby ip
10.0.1.252 (vlan-1)
10.0.2.252 (vlan-2)
10.0.3.252 (vlan-3)
10.0.4.252 (vlan-4)
10.0.6.252 (vlan-6).....so on.
Cisco Switching/Routing :: 4503 - How To Keep Ethernet Interface Up
Jan 18, 2012There is some way to increase the speed of changing the interface state from DOWN to UP when the cable is connected. I need to configure a port of Cisco 4503 in a way that when a cable is connected the port goes immediatly UP.
A solution can be to keep Cisco interface always UP and I remember that with "no keepalive" command to the interface configuration it was possible. But I tried and nothing happens.
Cisco :: Catalyst 4503 Doesn't Recognize Anything Plugged Into It
Oct 16, 2011just got a new supervisor 4 engine for this catalyst 4503 switch that has ios 12.2 (53) SG installed on it. That's quite a bit above the 7.6 i was working with. I'm having a couple issues now. first, I read that it is supposed to be sending out broadcasts automatically to get it's IP address but it doesn't seem to be. the module i'm plugging into there is ws-x4448-gb-rj45, a 48 port 10/100/1000 module in case it matters. it works other than that. I can plug two computers in and see them and i can plug the network in and they'll both get addresses and internet, but i need an IP on the switch. is there a way to send a manual request for broadcast out or somehow set the IP manually? (I know I can do it in the rommon, but that doesn't seem to do anything)
also, the last module in the switch is a 24 port poe ws-x4224-rj45v. the module is recognized, the status light green, the "show interface status" lists it, but it doesn't recognize anything plugged into it. the supervisor is not configured at all yet, so maybe that has something to do with it, but the other module, like i said, works.
Cisco Switching/Routing :: L2 Tunneling 4503 SUP2+TS?
Sep 16, 2012I need to implement over an ethernet link L2 tunnel because I want to isolate another VLANs domain.On the first side I can use the command : sw mo dot1q-tunnel on a new C4503 on the other side I cannot configure the command : sw mo dot1q-tunnel.
the other side is an old C4503 we upgrade the flash with a compact flash to upgrade to a new IOS v15 but the command doesn't exist also.I red the cisco feature navigator feature and I am sure the dot1Q-tunnel is available on my image : cat4500-ipbasek9-mz.150-2.SG.binso I don't know why I can use it.