Cisco AAA/Identity/Nac :: ACS 15015 Could Not Find ID Store
Feb 12, 2012
I'm trying to authorize managment access for HP ProCurve Manager via ACS RADIUS. But I get the failure: 15015 Could not find ID Store Machine is configured under Network Devices and AAA Clients, the sevice selection rule selects the correct access service, Access Service is Network Access, authorization profiles = permit access.
I have a new Cisco Secure ACS 5.2 on a VM. We want to use it to for administrative access to our Cisco equipment with TACACS+. I am trying to map user permissions to different groups of devices based on active directory group membership, however it is not working.
I am using an LDAP (configured for secure authentication) external identity store. On the directory organization tab, I have confirmed the accuracy of the subject and group search base and the test configuration button shows that it's finding > 100 users and >100 groups.
On the directory groups page I have entered the groups according to the required format. cn=groupname1,ou=groups,dc=abc,dc=com
I have a rule based result selection under group mapping. I have two rules in the format below.
Conditon LDAP:Externalgroups groupname1 Result Identitygroup1
I have the default group set to a identity group named other. My problem is, no matter what user attempts to authenticate, the Default rule is applied, and the user is put into the other identity group.This occurs when I log on as a groupname1 user, groupname2 user, or as user that is not a member of either of those groups. LDAP authentication works and the user is able to logon to the device.
We are using ACS 5.2 and we are trying to create a Microsoft Active Directory (AD) Identity Store. We have a user to be used in the Active Directory creation General page and we would like to know how the test communication / ACS to AD communication takes place.
Our user is a predefined user in AD and has admin rights, but the password expires every 60 days. Will this affect the communication between AD and ACS 5.2 at everytime the entered user's password expires?
I'm currently looking for a solution in order to restrict the modification of the host internal identity store (add or delete MAC host) per group. The default administrator roles does not include "per group restriction". Under the ACS I defined one group per department? My objective it to allow each department to access their ACS MAC database to add or delete MAC addresses as required.
How to restrict internal identity store per group?Do I need to create new roles? and how?I was not able to get an answer from the ACS ADMIN manual.
We have a ACS 4.3.2 installed with users authenticating against an Active Directory database. The AD database not only authenticate the users but also assigns the group that is used to select IP address pool.Now the requirements require to use token authentication with SafeNet. This authentication uses the same username but the password is composed of the original password + OTP.The problem is that the SafeNet server doesn't return the group membership.I've read about the Identity Store Sequence in ACS 5.x and I think I could use it in the following sequence:! configure an Authentication Sequence using the SafeNet token server (this works with ACS 4.x)I configure an Attribute Retrieval Sequence against the AD database. This would use the username only, no password and would retrieve the group membership.
I have installed ACS 5.4 and we are looking to authenticate our Anyconnect users with ACS via Active Directory. I think I have the correct commands in our ASA ( we had ACS 4 and authenticated our anyconnect users ).
I also have configured ACS to use Active Directory and installed the server side cert in ACS. I'm just uncertain how to program ACS to use the security group that I have setup in Active Directory.
I am trying to setup PEAP authentication for wireless users but I got stuck at place where I have single ssid and users are store in different identity stores like some will be using their active directory and some are locally created users on ACS. I created separate service for wireless authentication and under that I am unable to create rule to differentiate them with identity stores. any idea how to achieve this.
I tried creating identity selection based on role but it does not work as for protocol like radius.peap,ms-chap ACS does not look for another identity store once user not find in an identity stores.
are the connections between the ACS and external identity stores encrypted?I know that when setting up LDAP identity store there is the option to specify SSL conection. Are the other connections encrypted by default, or is the data sent between the ACS and AD, for example, sent in the clear?
Using Sha1 for Cisco 7925g and sha256 for data. Two separate CA's, one EnTrust (SHA1) the other Local Wondows CA (SHA256); ISE can only use one at a time to process a particular protocol (ie..EAP-TLS, HTTP, etc...) As a result we have to have a separate PSN just for Wireless and Wired VoIP (which can only hold SHA1 RSA1024).
As advised by Bug Toolkit for bug # CSCub82913: "Workaround: adflush resolves the issue temporarily". But I can't find that command in the console or in the documentation.
I had ACS 5.2 ( Evalution License ) setup installed on VMware with patch 11 when I try to restore earlier backup of ACS gives me error "Cannot find acsbackup_instance.log in the backup file"
I am using Filezilla FTP sever for backup transfer.
I'm doing some testing with ACS server on my windows box and I can't seem to get a barebone radius authentication to work with ACS internal users. I tested the same configuration with TACACS and it works fine, so there's something missing or misconfigured in my setup.
I have a cisco 3550 switch that I want users to login using their ACS username/password.
I'm migrating ACS 4.2 to ACS 5.2 for a customer and I'd like to find a service selection for TACACS+ protocol coming from an ASA.I use TACACS+ for device administration but also for AAA of internal users internet access.I also use RADIUS for vpn remote-access, without problems.How to distinguish through the ACS service selection ?
Just brought an ipod and downloaded itunes but my laptop wont connect to the itunes store, it says basically it cant connect and that i need to take a look at my network settings? I have this same problem with steam aswell and got so frustrated i ended up deleting it even though i have games on there.
Situation: I have a File server, name is \fileserver and ip address is: \192.168.1.254The shared drive on the server is split into 2 folders which are: Data and HomeI have 17 laptops which all connect to these folders via a group policy which maps the L: to Data and the H: to Home. On 4 of the laptops, for some reason I can't access the Home folder as I get an access denied message. I am the administrator and have full rights. On the other 13 laptops it works fine. I have found that if I try connecting using the IP address \192.168.1.254Home, it works fine.[CODE]
i can access app store on my iphone at home and other broadband connections but cant access at work. thinking if it would be the asa thats stopping htis. i have allowed port 3689 but no joy.
My dad has an issue with his Windows 7 home edition laptop, he cant get any updates on AVG, Itunes or access the itunes store, he keeps getting error messages denying access. Hes using the 64bit Itunes lastest version (I uninstalled his very out of date itunes last night and downloaded the new version) but still the store wont open
Have spa module on 6509E experience that error: ! sh log | b crash SLOT 3: Aug 18 12:52:10 CST: %CARDMGR-2-ESF_DEV_ERROR: An error has occurred on Ingress ESF Engine: Control Store Parity Error SLOT 3: Aug 18 12:52:10 CST: %ESF_CRASHINFO-2-WRITING_CRASHINFO: Writing crashin fo to disk0:crashinfo.esf_20110818-175210 [Code]....
My Location Free has recently stopped letting me access the App Store, Itunes store and Facebook. Someone suggested I change the channel, but not sure how to do that.
*spamApTask0: Nov 09 15:59:29.071: %LOG-3-Q_IND: capwap_ac_reassembly.c:652 Unable to store capwap fragment from 88:f0:77:b6:fd:00. *spamApTask3: Nov 09 15:59:27.616: %CAPWAP-3-REASSEM_SPACE: capwap_ac_reassembly.c:652 Unable to store capwap fragment from 88:f0:77:b6:fd:00.
What could be causing it? I am using 1524 APs in a Mesh environment with a WLC 5508 (7.0.116.0) which is connected to a H3C switched network.
The MAC addresses above are from my MAPs and I don't think I am getting it from the RAPs.
Is it possible to have emails stored automatically on a network drive after email is been read by the user? I know for sure that on a mailserver there is a feature that can be set up to have a copy stored and than send it to the users application.
My WRT54GS worked perfectly till 3days .. everything works perfectly it just that i cannot get connection to itunes store neither over wifi or on my pc .. when i disconnected my router and connect my pc directly to the modem .
I can't download an app from Google Play Store. I can download from my 4G network but not the wifi - Belkin F5D8236-4 V3. Google troubleshooting says the firewall is blocking the 'ports required for Google Play to download (TCP and UDP 5228) on that network.' However, with the firewall 'disabled,' the download is still not working.
I have a new techni colour wifi router TG582n which has a usb cobnnection in the side. I also have a new Samsung 400 gig external hard drive can these be linked to make a wifi hard disc store.
this might sound straight forward, but every other pc or console can find and connect to my router.This issue seems to happen about once every few months, sometimes it comes back by itself and reconnects completely fine.
There isn't a "user limit" on our router.Wireless adapter is dell wireless 1505 draft 802.11n wlan mini-card.
Have restarted PC and uninstalled and reinstalled the card.I tried to set the i.p address to static but it says "adapter disconnected" so won't allow me to edit any settings, despite it being able to find neighbour's wireless very easily.
I'm trying to test such 802.1x wired environment:windows xp sp3 as supplicant windows NPS as radius server 2960 as authenticator latest anyconnect (3.1.01065) + nam and standalone profile editor.I have a question: What is the difference between protected identity pattern and unprotected identity pattern (set in nam profile editor)? As I understand documentation PEAP-MSCHAPv2 is a tunneled method and it uses un- protected identity pattern to protect user's identity during phase 0. But if I use any fake identity here (anonymous, anonymous@[domain], etc) access is rejected (Access-Reject in switch debugs). I have to use exacly the same pattern in unprotected identity pattern as in protected identity pattern ([username] or [username]@[domain]) to gain access, regardless of authenticaton mode (same in machine only, user only authentication).
I have a new ACS 5.3 configure and a ASA5550 to authenticate VPN users using a remote LDAP server. Once I try to authenticate the users with the ACS it gives me the error message "22056 Subject not found in the applicable identity store(s)."
I checked out the documentation and have already configure the Identity store sequences to redirect everything to the LDAP server, I also did the Bind test and it says that is ok, but I still have the same problem.
I validated the Access Policies Menu, and tried to create a new Service Selection Rules, but whet I get to the option of modifying the Identity option I get the error: "This System Failure occurred: {0}. Your changes have not been saved.Click OK to return to the list page. " and I'm not able to modify the identity, not in this new option I created, nor in the ones already created in the ACS.