My dad has an issue with his Windows 7 home edition laptop, he cant get any updates on AVG, Itunes or access the itunes store, he keeps getting error messages denying access. Hes using the 64bit Itunes lastest version (I uninstalled his very out of date itunes last night and downloaded the new version) but still the store wont open
View 14 Replies
Just brought an ipod and downloaded itunes but my laptop wont connect to the itunes store, it says basically it cant connect and that i need to take a look at my network settings? I have this same problem with steam aswell and got so frustrated i ended up deleting it even though i have games on there.
View 7 Replies View RelatedMy WRT54GS worked perfectly till 3days .. everything works perfectly it just that i cannot get connection to itunes store neither over wifi or on my pc .. when i disconnected my router and connect my pc directly to the modem .
View 1 Replies View RelatedAlright it said to click "Check for updates" and then go back to download the update but everytime I click "check for updates" it says I don't have an internet connection even though I can still connect to the itunes store and everything. ran diagnostic in itunes and it told me to enable my network interface and I did that but it still wont work! My Internet signal is brilliant but I can't download the upgrade unless I update the software or something but it won't let me unless i have an internet connection which I do.
View 2 Replies View RelatedI have a PC with the following OS and Routers
PC: Win 7 x86
iTunes: 10.6
Router: DIR-655 (Firmware Version: B1, 2.06)
My new iPad cannot connect to iTunes for either home sharing or Wi-Fi Sync.I have check the windows event log and provides the following error lists....
444: ERROR: read_msg errno 0 (The operation completed successfully.)ERROR: mDNSPlatformReadTCP - recv: 10053..The following ports have been set up in Router Port Forwarding/Virtual Servers
-TCP: 3689
-UDP: 5353
I have disabled DMZ and enabled Multi Stream Cast, but it seems no use on the problem solving.The same errors are still provided. iPad cannot in the device list if it is in Wi-Fi connection, no home sharing.As I am not in US, the local supplier latest firmware version is 2.06NA Beta1
Is P S 3 the best way to connect netflix to TV and can you store movies in the P S 3 Hard- Drive
View 1 Replies View RelatedSituation: I have a File server, name is \fileserver and ip address is: \192.168.1.254The shared drive on the server is split into 2 folders which are: Data and HomeI have 17 laptops which all connect to these folders via a group policy which maps the L: to Data and the H: to Home. On 4 of the laptops, for some reason I can't access the Home folder as I get an access denied message. I am the administrator and have full rights. On the other 13 laptops it works fine. I have found that if I try connecting using the IP address \192.168.1.254Home, it works fine.[CODE]
View 10 Replies View Relatedi recently updated my windows vist acer (home version) laptop to windows vist ultamite, before i updated i could connect to my netcom series 7 wifi modem without any problem. now after the update it doesnt even reconise the wifi. i can use ethernet conection fine its just the wireless wont work
[code]....
I get error message like "can't delete old iTunes downloader or something like that.
View 5 Replies View Relatedmy download stop at 64% . what can i do to continue my downloading?
View 1 Replies View RelatedI'm trying to authorize managment access for HP ProCurve Manager via ACS RADIUS. But I get the failure: 15015 Could not find ID Store Machine is configured under Network Devices and AAA Clients, the sevice selection rule selects the correct access service, Access Service is Network Access, authorization profiles = permit access.
View 2 Replies View Relatedi can access app store on my iphone at home and other broadband connections but cant access at work. thinking if it would be the asa thats stopping htis. i have allowed port 3689 but no joy.
View 3 Replies View RelatedI just downloaded TV show Downton Abbey from iTunes, and I know from somewhere that it has so called DRM protection, but I am trying to move it to Surface RT. What should I do to make it happen?
View 1 Replies View RelatedDownload stops half the way
View 1 Replies View RelatedI have a problem on my computer (intel 4, windows 7).When i go to Itunes, i download my podcasts, it is ok. When i closed Itunes, 20 seconds after, ITunes reopen it-self, and that 3 times successively.
View 3 Replies View RelatedI am having trouble opening firefox as well as itunes. I get a message stating that i am not commected to the internet. I am able to connect to the internet using internet explorer and have no trouble logging on to websites from there.
View 1 Replies View RelatedI'm running Windows 7 Enterprise version 6.1 and itunes 10.1.1.4.Also running symantec endpoint protection too.Itunes does not recognise the internet connection and gives me an error message when I try to enter the store.Itunes could not connect to the itunes store. Make sure your network connection is active and try again.I've reinstalled itunes to solve my problem. Worked for a few days, now I get the same error message again.I've also tried setting symantec to allow itunes internet access.
View 1 Replies View RelatedI am unable to see my shared libraries in itunes
View 2 Replies View RelatedIt worked fine with my last router. It just doesn't seem to connect securely. It comes up under my iTunes, but once I go to enter the code, it doesn't show up as completed. Also, a utorrent monitoring app cannot connect to my computer, which is set up right at my computers end, but won't connect at all from my phone over wi-fi.
View 14 Replies View RelatedMy Location Free has recently stopped letting me access the App Store, Itunes store and Facebook. Someone suggested I change the channel, but not sure how to do that.
View 1 Replies View Relatedare the connections between the ACS and external identity stores encrypted?I know that when setting up LDAP identity store there is the option to specify SSL conection. Are the other connections encrypted by default, or is the data sent between the ACS and AD, for example, sent in the clear?
View 3 Replies View RelatedUsing Sha1 for Cisco 7925g and sha256 for data. Two separate CA's, one EnTrust (SHA1) the other Local Wondows CA (SHA256); ISE can only use one at a time to process a particular protocol (ie..EAP-TLS, HTTP, etc...) As a result we have to have a separate PSN just for Wireless and Wired VoIP (which can only hold SHA1 RSA1024).
View 5 Replies View RelatedWe use Cisco LMS Prime 4.1 to archive our Cisco Equipment configurations.
Now we want to store the configurations off site.
Model: Linksys WAG160N
Ammex - A
Firmware - 1.00.15
Even after 5 firmware updates I still cant always connect my Iphone with itunes with bonjour service.
Wi-fi working fine prior to updating to itunes 10.6.1 but when I update on my laptop i have no access to internet showing "limited connectivity".Only way i can resolve this currently is to restore to earlier point and have now deleted itunes. However i need access to itunes for ipad and iphones.
View 6 Replies View Relatedfor some reason when I'm using high speed internet my internet explorer and i tunes work great. but when i use dial up my internet explorer tells me its unable to display every web page i type in. and when im on itunes when im using dial up i cant connect to the store, it says something like check your network connection and make sure its still active.
View 4 Replies View RelatedThis has finally become a BIG problem. Any time I have iTunes running and downloading podcasts, it hogs all the bandwidth for the Internet (but not the local network). This is not only slowing down access from the machine running iTunes and the downloads but for every other device trying to web browse.I'm running two Macs and one Windows/Dell PC on the network. All are hard-wired (Ethernet) to the DIR-655. How to throttle iTunes? I did some research and found that I am apparently not the only one having this issue.I'm about to bail on iTunes entirely and try to get used to Miro, which does allow bandwidth control.
View 3 Replies View RelatedI have a new X2000 v2 firmware 2.0.04. When I use it- itunes on my PC with seven don't work and give me error 8003.- the Apple Store on my iPad and on my iPhone don't download or upgrade the application.- itunes on my macbook air with mountain lions don't work and give me error 8003.- the download in ftp are very slowIf I use my old AG2241V2 all work fine.I have replicated the configution of old router on the new as far as possible but don't work.
View 3 Replies View Relatedhow can i store urls used by the client side in the server using java
View 1 Replies View RelatedIs it possible to have emails stored automatically on a network drive after email is been read by the user? I know for sure that on a mailserver there is a feature that can be set up to have a copy stored and than send it to the users application.
View 1 Replies View RelatedI can't download an app from Google Play Store. I can download from my 4G network but not the wifi - Belkin F5D8236-4 V3. Google troubleshooting says the firewall is blocking the 'ports required for Google Play to download (TCP and UDP 5228) on that network.' However, with the firewall 'disabled,' the download is still not working.
View 4 Replies View RelatedHave spa module on 6509E experience that error:
!
sh log | b crash
SLOT 3: Aug 18 12:52:10 CST: %CARDMGR-2-ESF_DEV_ERROR: An error has occurred on
Ingress ESF Engine: Control Store Parity Error
SLOT 3: Aug 18 12:52:10 CST: %ESF_CRASHINFO-2-WRITING_CRASHINFO: Writing crashin
fo to disk0:crashinfo.esf_20110818-175210
[Code]....
After I updated my E4200 V1 with the 1.0.04 update I am unable to connect my WET610N to it with 802.11N. I can connect fine with 802.11G. I tried the Site Survey method of pairing them as well as manual. When it fails it goes through the minute timeout of trying and then Link Status is disconnected. I have anything from phones to laptops connect to the E4200 with wireless N, its just the WET610N that doesnt want to pair.
Before I was running the following:
E4200 V1 1.0.03
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11N
After I was running:
E4200 V1 1.0.04
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11G
