ITunes 10.1.1.4 Not Recognising Internet Connection
Jan 18, 2011
I'm running Windows 7 Enterprise version 6.1 and itunes 10.1.1.4.Also running symantec endpoint protection too.Itunes does not recognise the internet connection and gives me an error message when I try to enter the store.Itunes could not connect to the itunes store. Make sure your network connection is active and try again.I've reinstalled itunes to solve my problem. Worked for a few days, now I get the same error message again.I've also tried setting symantec to allow itunes internet access.
for some reason when I'm using high speed internet my internet explorer and i tunes work great. but when i use dial up my internet explorer tells me its unable to display every web page i type in. and when im on itunes when im using dial up i cant connect to the store, it says something like check your network connection and make sure its still active.
Region : UnitedKingdom Model : TL-WDR3600 Hardware Version : V1 Firmware Version : 3.13.26 ISP : Virginmedia
I've plugged a 3tb seagate backup plus external hard drive into the routers USB port and its not being recognised my other wd 1tb has no problem being picked up.
Just brought an ipod and downloaded itunes but my laptop wont connect to the itunes store, it says basically it cant connect and that i need to take a look at my network settings? I have this same problem with steam aswell and got so frustrated i ended up deleting it even though i have games on there.
I just downloaded TV show Downton Abbey from iTunes, and I know from somewhere that it has so called DRM protection, but I am trying to move it to Surface RT. What should I do to make it happen?
I have a problem on my computer (intel 4, windows 7).When i go to Itunes, i download my podcasts, it is ok. When i closed Itunes, 20 seconds after, ITunes reopen it-self, and that 3 times successively.
I am having trouble opening firefox as well as itunes. I get a message stating that i am not commected to the internet. I am able to connect to the internet using internet explorer and have no trouble logging on to websites from there.
It worked fine with my last router. It just doesn't seem to connect securely. It comes up under my iTunes, but once I go to enter the code, it doesn't show up as completed. Also, a utorrent monitoring app cannot connect to my computer, which is set up right at my computers end, but won't connect at all from my phone over wi-fi.
My new iPad cannot connect to iTunes for either home sharing or Wi-Fi Sync.I have check the windows event log and provides the following error lists.... 444: ERROR: read_msg errno 0 (The operation completed successfully.)ERROR: mDNSPlatformReadTCP - recv: 10053..The following ports have been set up in Router Port Forwarding/Virtual Servers
-TCP: 3689 -UDP: 5353
I have disabled DMZ and enabled Multi Stream Cast, but it seems no use on the problem solving.The same errors are still provided. iPad cannot in the device list if it is in Wi-Fi connection, no home sharing.As I am not in US, the local supplier latest firmware version is 2.06NA Beta1
My dad has an issue with his Windows 7 home edition laptop, he cant get any updates on AVG, Itunes or access the itunes store, he keeps getting error messages denying access. Hes using the 64bit Itunes lastest version (I uninstalled his very out of date itunes last night and downloaded the new version) but still the store wont open
Wi-fi working fine prior to updating to itunes 10.6.1 but when I update on my laptop i have no access to internet showing "limited connectivity".Only way i can resolve this currently is to restore to earlier point and have now deleted itunes. However i need access to itunes for ipad and iphones.
This has finally become a BIG problem. Any time I have iTunes running and downloading podcasts, it hogs all the bandwidth for the Internet (but not the local network). This is not only slowing down access from the machine running iTunes and the downloads but for every other device trying to web browse.I'm running two Macs and one Windows/Dell PC on the network. All are hard-wired (Ethernet) to the DIR-655. How to throttle iTunes? I did some research and found that I am apparently not the only one having this issue.I'm about to bail on iTunes entirely and try to get used to Miro, which does allow bandwidth control.
I have a new X2000 v2 firmware 2.0.04. When I use it- itunes on my PC with seven don't work and give me error 8003.- the Apple Store on my iPad and on my iPhone don't download or upgrade the application.- itunes on my macbook air with mountain lions don't work and give me error 8003.- the download in ftp are very slowIf I use my old AG2241V2 all work fine.I have replicated the configution of old router on the new as far as possible but don't work.
Alright it said to click "Check for updates" and then go back to download the update but everytime I click "check for updates" it says I don't have an internet connection even though I can still connect to the itunes store and everything. ran diagnostic in itunes and it told me to enable my network interface and I did that but it still wont work! My Internet signal is brilliant but I can't download the upgrade unless I update the software or something but it won't let me unless i have an internet connection which I do.
If you can't home share on iTunes between Computers or AppleTV, try turning multicast on
1) login to router 2) Go to Advanced tab 3) Select Advanced Networking on Left hand column 4) Select checkbox to enable multicast streams 5) Save the changes
In order to get all my machines working, I also had to enable multicast streams on my network extender as well. The IP address for the network extender is 192.168.0.50 or type in DLINKAP in the URL bar and follow the relevant instructions for your model number.
Please note if you use a software firewall on your PC or Mac, you may need to also free up TCP port 3689 and UDP port 5353. However there are plenty of support articles at Apple / Norton / Microsoft / etc... on how to do this for your relevant firewall..
Just purchased an N66U router and loving it so far. The only problem I'm having is that iTunes is not seeing the shared library I setup on the router. I have a usb drive plugged into it and have set the options to use that drive and the itunes server is turned on. I've rebooted the router many times, removed the drive and put it back in. Turned of settings and turned back on. Nothing works. iTunes does see my PC's shared library just fine.
I'm trying to get the silly iTunes Wi-Fi sync to work , and I've been told to ensure that these ports are open:5297 TCP 5298 TCP/UDP and 5353 UDP in the hardware router. How do I do this with the DIR-655 (HW version A3, FW version 1.35NA)?
My WRT54GS worked perfectly till 3days .. everything works perfectly it just that i cannot get connection to itunes store neither over wifi or on my pc .. when i disconnected my router and connect my pc directly to the modem .
using an Airport Express to stream itunes music wirelessly? I'm able to get the AE setup and can stream for about 30 minutes but then it can't be found. I'm assuming the 655 is kicking it off. I've tried changing settings on the 655 but nothing seems to make any difference. I'm able to use an Apple TV/iPhone/iPad with no issues.
I just purchased a Linksys EA4500 (firmware is up to date). However while it set itself up wonderfully. I cannot get my wireless devices (specifically my apple tv) to see my NAS or my itunes PC, My ipads can access the NAS if i put in the correct address but not automatically.
Everything is connected to my cisco switch that is hardwired (2 xboxes, 2 ps3, 3 tv's, Wii, network audio receiver, 2 NAS, printer, 2 computers, etc). I disabled the Wi-Fi on the bell router. On the wifi are a few ipads, 3 blackberries, 1 iphone, 2 laptops).I am fully aware that the reason the wireless devices cannot see the hardwired equipment is because it is on a different subnet.
However when i try and change the IP address of the router to 192.168.2.2 (putting it on the same subnet) the router must detect a conflict then changes itself to a class A address (10.x.x.x) OR i get an INVALID IP address. As well i have noticed an overall degradation in the speed of my network (all gigabit hardware with cat 6 cabling)
I am using an e4200 router, Windows 7 64-bit, ipad and iphone. The issue that I am having is that the iPad and iPhone cannot maintain a connection iTunes via Home Sharing. When I start iTunes I am able to access Home Sharing on the iPhone and iPad. If I don't connect right away I will lose this capability. Also, the connection is lost after a seeminingly random amount of time. Also, when if I using the iPhone to listen to music and I pick up my iPad and access the wireless network, the phone gets kicked off Home Sharing. The only way to remedy the situation is to re-start iTunes on my computer. I've been messing around with every setting.
I have a problem with my isa570. Ever since I started using it it sometimes takes me two or three clicks to get a website to load. Also connecting to iTunes is almost impossible. It does work sometimes but then very slowly. I have switched off application control.
For the past few months, I have been using a Buffalo drive (formatted as FAT) as a media server to function as my network drive for iTunes. Unfortunately, I have recently noted in the last 2-3 weeks that, when copying new files, the file size changes to zero bytes. I do not seem to have this problem when i plug the drive directly into my computer via USB, only when adding files over the network. I spoke to tech support, who said, based on the story in that files can be correctly transferred when directly connected, it appears to be a network problem.
I am running OS 10.8 with iTunes 11 (but also occurred with iTunes 10) and using version 1.0.04 on the E3000.
I was trying to remotely command my iTunes library via an iPhone app called Remote. It worked for some times with an intermittent disconnection problem due to the iPhone locking. But even after unlocking the phone and reconnecting the Wi-Fi, Remote couldn't find my iTunes library again and my only workaround was to relaunch iTunes on the PC (which is Ethernet-wired to my router). Few days ago nothing worked!!! I could no more get Remote to find iTunes.
I could not find a solution even by rebooting the router or unplugging the PC's Ethernet cable. Last night I powered off the router and after 10s I powered it on again. And then it worked!I highly suspect a problem between my router and Bonjour which is as UPnP, an Apple protocol for discovering communicating devices. Discovery phase being usually done with broadcast frames, something goes wrong in the router with processing the broadcasts, or is it a Bonjour problem?Please note that even now that Remote can find iTunes, I still have my old intermittent disconnection problem.So is there any incompatibility between WRT-610N and Bonjour and what is the fix ?
I just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
I have problem with my Internet connection. Recently my Internet connection often get slow. There are 3 connections on the server running Windows Server 2003. 1st is External, 2nd is Internal and 3rd is VPN (please see attahement). There is nothing to do with External and Internal connections, and everytime the Internet connection get slow, I have to disconnection VPN (connection) and connect it again.
Every time I boot up my computer, everything will be working fine for about 5 -10 minutes, but after this, all my browsers will lose connection to the Internet. All of them: IE, firefox, chrome, even the steam browser, all of them just lose connection.The weird thing is, my net connection is perfectly fine: I can still play online games, still use online chat services, still open and use programs like utorrent. It's like something is just blocking all my browser connections.When I run a network troubleshooter, it says "your computer appears to be correctly configured, but the device or resource (Microsoft Corporation: Software, Smartphones, Online, Games, Cloud Computing, IT Business Technology, Downloads) is not responding."I googled this and came across some apparent fixes like flushing and re-registering my dns and restarting my modem, niether of which has worked.In addition, this problem is showing up on two totally separate shared networks and has only affected my computer. Other netwworked devices, like friends/families computers and my iPhone (which I am using to type this) work fine.
