My WRT54GS worked perfectly till 3days .. everything works perfectly it just that i cannot get connection to itunes store neither over wifi or on my pc .. when i disconnected my router and connect my pc directly to the modem .
View 1 RepliesJust brought an ipod and downloaded itunes but my laptop wont connect to the itunes store, it says basically it cant connect and that i need to take a look at my network settings? I have this same problem with steam aswell and got so frustrated i ended up deleting it even though i have games on there.
View 7 Replies View RelatedMy dad has an issue with his Windows 7 home edition laptop, he cant get any updates on AVG, Itunes or access the itunes store, he keeps getting error messages denying access. Hes using the 64bit Itunes lastest version (I uninstalled his very out of date itunes last night and downloaded the new version) but still the store wont open
View 14 Replies View Relatedi have been using a WRT54GS LINKSYS ROUTER for 2.5 years problem free until now. All of a sudden i cant connect to the internet through it at all. when i diconnect it and hook my desktop directly to the modem it works but i need the wireless to use my laptop. I have tried everything to get it working again, no dice. when using w7 diag tool it reports back local area connection doesnt have a valid ip config.
View 3 Replies View RelatedI have a WRT54GS router. Desktop works fine and the laptop wireless connection worked fine until recently. Now I cannot connect to the router with the laptop. At times I can get to the access point, but can't get to the internet. But for the most part I cannot connect to the router at all.
View 4 Replies View RelatedI have a wrt54gs linsys router with speedbooster. I bought my son a tablet for xmas. I cannot connect the tablet to the network. It finds my network, searches for an IP address, and then disconnects. It will connect for about 2 seconds, and then shows disconnected. My PC's, and WII work fine, although getting the WII ad netflix to reconnect after a power outage is like rocket science requiring field support every time. My tablet wont stay connected, and the book tells me that the router must accept 802.11b/g, and that if it has 802.11n, then it needs to be reconfigured to accept 802.11b/g.
View 2 Replies View RelatedI have a few devices I cannot connect to my router or modem but my ps3 and 2 xboxes are connected. I have easy link and I try to add devices to it but it doesn't show me the same options it did before when I added my ps3, and ipod. Now I can't connect my psp or any phone to it, I have the WRT54GS v7.2, those are my only problems with the router nothing.
View 3 Replies View RelatedI would like to connect a WRT54GS to a Netgear FVS318 router to proivde wireless access to my network. My current setup has my DSL modem connected to the FVS318 to provide my network computer with wired internet access. Can I simply connect the WRT54GS to the FVS318 using the LAN port? I've read other threads that mentioned changing the WRT ip address to 192.168.0.150 and disabling DHCP. i've don'e both, but I still don't get wireless access. My wireless devices can connect, but they don't have internet access. I have some questions below:
1. In the WRT setup, what do I use for the Internet connection type? Since my Netgear has that information already, do I need to put anything here?
2. In Setup -> Advanced Routing, do I neet to change the operating mode to Router?
3. Any other configuration changes that I need to do?
I currently have an E1000 connected to my cable modem in my living room. It provides wireless access to my whole household.
I have a set of computers I want to have set up as a lab on their own router and have a WRT54GS available for me to modify.
The WRT is in the dining room (office) and the cable modem/E1000 are about 45 feet away.
I want to set up the wireless environment on the E1000 as 192.168.1.1-24 and the wired network as 192.168.2.1-24 with the wired network being able to wirelessly connect to the wired so all the machines in the house can see my server and other machines.
I need to hook two wireless routers togetner. I want to use the E4200 as the primary and the WRT54GS as a bridge or 2nd access point to the same network. I have the WRT54GS firmware upgraded to the latest dd-WRT firmware with WDS enabled.
View 1 Replies View RelatedI have a cable internet connected to Linksys WRT54GS (ver 7.2) as my main router. I have a spare TP link TD-W8960N and was thinking to use it as a wireless bridge through WDS.
View 2 Replies View RelatedI intend to connect a network built around the WRT54GS to Internet by passing through a second network who is already connected to Internet through the Orange Livebox-2 (French).I have a traditional home network with basic shares on the French Orange Livebox-2 and its WiFi.The computers runs XP - Pro .My ADSL access is normally through the Livebox-2 (Range of addresses 192.168.1.xxx) and I run DHCP Working Group "WORKGROUP".It works without problem (Internet and VoIP telephony) except the Wifi of the Livebox which is known as poor (range and stability).I also manages a small "pedagogical workshop" for the school who visit my mill.This network is available to my young visitors based on a (tower) server containing the libraries and teaching materials and its printer. It’s XP - Pro machine. and to allow a maximum of two laptops be WiFi connected.The second network is built around the Linksys router (wich integrates no modem, simply a router).The WRT54GS router (rev 6) whose firmware is original Linksys up to date.I am setting the two Wi-Fi (Livebox 6 Cnl) and Cnl 4 on WRT54GS and different keys (this is manageable without difficulty).It has its server DHCP and Wi-Fi to connect their machine.What about the name of this second network group ? Currently “WORKGROUP” as well.I am setting a range different on the router WRT54GS (192.168.2.xxx) and enabled the DHCP.This "educational" network works perfectly when alone and separated from the "home" network and doesn’t get connected to Internet…I want to connect this router Linksys WRT54GS rev6 cascading through the Livebox-2. Share Internet via the Livebox-2 access.What about functionality?What is the connection to setup ?Should it be simple physical connection with a cable between the yellow ethernet port "2" of the Liveboxbox and the "Internet" connector of the Linksys router? Is this a good track to explore? I have searched extensively on the Internet but found proposals who are very old and refer to old Livebox... I did test and is not satisfactory...
View 1 Replies View RelatedI connected my router to a new computer. The computer is connected to the Internet.My SmartPhone won't connect via the router.
I logged in to the router from my cell and entered the password.The cell says the following over and over without connecting: ScanningObtaining IP address from routerDisconnectedConnectingScanning ... over & overHow can I connect my Samsung GAlaxy SII Skyrocket to my WiFi router [WRT54GS]?
I've recently been gifted with a WRT54GS v.2 which came from a family member who upgraded their wireless router and therefore passed this one along to me. It was working perfectly for them, but not me.
I've tried using the setup CD and doing a manual setup, but no internet connection is detected. I must confess to being a total wireless router newbie, this is my first one, so I am stumped as what to do next. I've looked at the FAQ's and through the forum as well, but I just don't know what might apply to my situation and as I am not very well versed in the terminology, I tend to get lost.
I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
I have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that.
View 9 Replies View RelatedI just purchased a Linksys EA4500 (firmware is up to date). However while it set itself up wonderfully. I cannot get my wireless devices (specifically my apple tv) to see my NAS or my itunes PC, My ipads can access the NAS if i put in the correct address but not automatically.
Everything is connected to my cisco switch that is hardwired (2 xboxes, 2 ps3, 3 tv's, Wii, network audio receiver, 2 NAS, printer, 2 computers, etc). I disabled the Wi-Fi on the bell router. On the wifi are a few ipads, 3 blackberries, 1 iphone, 2 laptops).I am fully aware that the reason the wireless devices cannot see the hardwired equipment is because it is on a different subnet.
However when i try and change the IP address of the router to 192.168.2.2 (putting it on the same subnet) the router must detect a conflict then changes itself to a class A address (10.x.x.x) OR i get an INVALID IP address. As well i have noticed an overall degradation in the speed of my network (all gigabit hardware with cat 6 cabling)
I am using an e4200 router, Windows 7 64-bit, ipad and iphone. The issue that I am having is that the iPad and iPhone cannot maintain a connection iTunes via Home Sharing. When I start iTunes I am able to access Home Sharing on the iPhone and iPad. If I don't connect right away I will lose this capability. Also, the connection is lost after a seeminingly random amount of time. Also, when if I using the iPhone to listen to music and I pick up my iPad and access the wireless network, the phone gets kicked off Home Sharing. The only way to remedy the situation is to re-start iTunes on my computer. I've been messing around with every setting.
View 4 Replies View RelatedWhat new features you would like to have on E4200V2?Here is what I would like to have on it,iTune Server,Torrent Download support,WDS.
View 1 Replies View RelatedI've been using a Linksys WRT54GSV4 router since November 2005, and have rarely had any problems with it. Now today after the power went out, devices cannot connect to the internet.My PC connected directly to the cable modem results in internet connectivity.My PC connected to the router allows router access through 192.168.1.1.My PC connected to the router can NOT access the internet or otherwise get out to the modem.WiFi devices in the house cannot connect to the internet, but can still access the router through 192.168.1.1.Swapping cables results in the same behavior, so the PC can connect to the modem with either cable, and the computer can connect to the router with either cable.
View 1 Replies View RelatedI have a WRT54GS router, and starting today I am completely unable to access the internet through it. If I connect my computer directly to my modem, I can access the internet, but if I try to connect through the modem, all I get is "DNS server not responding".I've tried changing the DNS server address on the router configuration page, but it doesn't work.
Here's what my ipconfig /all shows:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : HomePCPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing Enabled. . . . . . . . : NoWINS Proxy Enabled. . . . . . . . : No
[code]....
For the past few months, I have been using a Buffalo drive (formatted as FAT) as a media server to function as my network drive for iTunes. Unfortunately, I have recently noted in the last 2-3 weeks that, when copying new files, the file size changes to zero bytes. I do not seem to have this problem when i plug the drive directly into my computer via USB, only when adding files over the network. I spoke to tech support, who said, based on the story in that files can be correctly transferred when directly connected, it appears to be a network problem.
I am running OS 10.8 with iTunes 11 (but also occurred with iTunes 10) and using version 1.0.04 on the E3000.
I was trying to remotely command my iTunes library via an iPhone app called Remote. It worked for some times with an intermittent disconnection problem due to the iPhone locking. But even after unlocking the phone and reconnecting the Wi-Fi, Remote couldn't find my iTunes library again and my only workaround was to relaunch iTunes on the PC (which is Ethernet-wired to my router). Few days ago nothing worked!!! I could no more get Remote to find iTunes.
I could not find a solution even by rebooting the router or unplugging the PC's Ethernet cable. Last night I powered off the router and after 10s I powered it on again. And then it worked!I highly suspect a problem between my router and Bonjour which is as UPnP, an Apple protocol for discovering communicating devices. Discovery phase being usually done with broadcast frames, something goes wrong in the router with processing the broadcasts, or is it a Bonjour problem?Please note that even now that Remote can find iTunes, I still have my old intermittent disconnection problem.So is there any incompatibility between WRT-610N and Bonjour and what is the fix ?
Is P S 3 the best way to connect netflix to TV and can you store movies in the P S 3 Hard- Drive
View 1 Replies View RelatedI borrowed a netbook from a friend to take on vacation . It is a Dell Inspiron Mini 1011 running XP SP3 My router is a WRT54GS. I can connect to the router with my Vista laptop with no problems. I can connect to the router with a cat cable using the netbook. The netbook sees a strong signal from my router all the time, but will not connect. Occasionally it will connect for a moment, but then disconnects.
View 6 Replies View RelatedI use a BEFVP41 VPN router. I have changed several settings. How can I backup these settings and store these settings in a save place.
View 3 Replies View RelatedI lost my installation CD and now I moved to a new place. I have linksys wireless-G router model-wrt54gs. how can i setup a new wireless now?
View 5 Replies View RelatedI have a Wireless-G broadband router WRT54GS and have figured out how to enable logging.This gives me the IP addresses, but I would like to be able to easily see the FQDN so I can see what my kids are looking at on the web.Is there a way to get that information via the built in logging feature?If not is there a way to take the log file and run this through sometype of program that will generate the FQDN's?
View 2 Replies View RelatedSometimes the PC does not acquire the dns etc from the router and I have to manually enter in each PC to restore internet. - only W7.
View 2 Replies View Relatedhow do i uninstall my linksys WRT54GS router? i just bought a netgear and i want to uninstall my wrt54gs router
View 9 Replies View RelatedI have a 2wire modem connected to the Internet port of my WRT54GS which is connected to a D link DSS 16+ Fast Ethernet switch. Without the switch, I can connect wired and wirelessly to my WRT54GS. However, when I put connect my any port of my D link switch to ports 1 - 5 of WRT54GS, I loose internet all together either wired/wireless to the router or wired to the D-link switch.I wonder why the IP Address will change as I understand that the switch is just a pass through switch.
View 1 Replies View RelatedI'm having a very difficult time getting my WRT54GS to work with my Westell 6100 modem. I've been bouncing around gathering info, and what I've learned is that the goofy way CenturyLink tech support told me to hook up my old wired router (modem line into outgoing (LAN) router port) is because the Westell 6100 is a "smart modem/router". Therefore, when I run the Linksys setup CD, it sees the modem as a router, and won't properly configure. I've also learned that the Westell modem can be "dumbed down" into simply a modem by putting it into "bridge mode", which is where I'm at right now - trying to get it reset to factory defaults and resetting the connection type from PPPoE to Bridge. In the meantime, I also reset the WRT54GS to factory defaults, and now I've got another problem: the router will not allow me to set up encryption. The default setting is "Disabled", and when I click the down arrow and try to make any selection at all (preferred selection is WPA2 Personal), it reverts to Disabled. I've also tried to change the router's IP address to 192.168.2.1 (and alternately to 192.168.1.253), so it won't conflict with the modem's IP, and it freezes up every time I try.
View 1 Replies View RelatedI have a Linksys WRT54GS router. It has been performing fine for many years. We have 2 PCs and 2 MacBooks that get on the wifi network with no problem. However, several months ago, a friend could not get his iPad online. Last week, a guest with a PC couldn't get online. I just bought an iPhone and it can't get online either. In all 3 cases, the devices found the network but when we typed the correct password the devices were unable to connect. The 4 laptops connect with no problem.
how to get my new iPhone and other new devices to connect?