Linksys Wireless Router :: E4200V2 Featured With ITunes Server And Torrents
Jan 11, 2012What new features you would like to have on E4200V2?Here is what I would like to have on it,iTune Server,Torrent Download support,WDS.
View 1 Replies
ADVERTISEMENT
Linksys Wireless Router :: E3000 - Using Buffalo Drive (formatted As FAT) As Media Server For ITunes
Nov 30, 2012For the past few months, I have been using a Buffalo drive (formatted as FAT) as a media server to function as my network drive for iTunes. Unfortunately, I have recently noted in the last 2-3 weeks that, when copying new files, the file size changes to zero bytes. I do not seem to have this problem when i plug the drive directly into my computer via USB, only when adding files over the network. I spoke to tech support, who said, based on the story in that files can be correctly transferred when directly connected, it appears to be a network problem.
I am running OS 10.8 with iTunes 11 (but also occurred with iTunes 10) and using version 1.0.04 on the E3000.
Linksys Wireless Router :: E4200V2 - Use Specific DNS Server?
Dec 20, 2012My ISP dynamicly assigns IP's so I have my New E4200V2 set up as Automatic Configuration DHCP. I want to be ablt to use a specific DNS server rather than the one issues by my ISP.No matter what values are in the Static DNS 1, 2 and 3 the router continues to pull a DNS from my ISp. My POS old D-link 615 was able to utilize a custom DNS server with no issues so surely ther emyst be a way to do the same on the E4200.
View 8 Replies View RelatedLinksys Wireless Router :: E4200v2 FTP Server Fails?
Apr 24, 2012New E4200v2 @ firmware 2.0.36. The FTP server will go offline about once every 24 hours. I can revive it by simply clicking on Save in Storage/Administration or FTP Server. I don't have to change anything, just click Save. How can I keep the FTP running?
"Disk" is a 16gb USB flash memory. Formated FAT32, 1 partition, 6 users besides Admin and Guest, 2 groups besides Admin and Guest.
Linksys Wireless Router :: Change Media Server Name (E4200v2)
Mar 25, 2013Is it possible to change the DLNA Server's name? Cisco49129 just doesn't have a nice ring to it.
View 1 Replies View RelatedLinksys Wireless Router :: E4200v2 PPTP Server Not Responding
Jan 17, 2013I setup my Windows 8 desktop for a PPTP VPN server so I can connect my iPhone 5 to it.Using the Cisco Connect Firmware, as I was having internet speed issues with the Smart Wi-Fi Firmware and I wasn't loving the interface of the Smart Wifi Firmware anyway.According to the router the firmware is up to date. All three VPN settings are enabled.PC is set to a static IP internally. 192.168.1.116 to be precise.PPTP port forwarding (1723) is set to the PC's static IP, though I have tried without port forwarding and it didn't work either.If I have my iPhone connected to the wireless network and point it to the internal IP address of the PC, I can connect to the VPN.If I bypass my router and hook my desktop directly to the modem (and point my iPhone to the IP that gets assigned to my desktop from my ISP) I can connect to the VPN.But if I have everything hooked up normally and try to connect to the VPN from my iPhone (using the IP address my ISP assigned to the router), I get a PPTP server not responding error.
View 3 Replies View RelatedLinksys Wireless Router :: E4200v2 Video Streaming Lag From Media Server?
Mar 25, 2012When I try to stream a movie through the media server or through my computer to my xbox 360 the video will play fine for a couple minutes then it well get choppy and then the sound will not sync with the picture. I have the latest firmware and reset it also. Tried switching channels and changed mtu didn't do anything. tried steaming on 2 different xboxs and its the same thing.
View 3 Replies View RelatedAsus N66U Router ITunes Server Not Working?
Nov 28, 2012Just purchased an N66U router and loving it so far. The only problem I'm having is that iTunes is not seeing the shared library I setup on the router. I have a usb drive plugged into it and have set the options to use that drive and the itunes server is turned on. I've rebooted the router many times, removed the drive and put it back in. Turned of settings and turned back on. Nothing works. iTunes does see my PC's shared library just fine.
View 2 Replies View RelatedLinksys Wireless Router :: WRT54GS - Cannot Connect To ITunes Store
Nov 7, 2011My WRT54GS worked perfectly till 3days .. everything works perfectly it just that i cannot get connection to itunes store neither over wifi or on my pc .. when i disconnected my router and connect my pc directly to the modem .
View 1 Replies View RelatedLinksys Wireless Router :: Ea4500 - Cannot Get Wifi Devices To See Nas Or Itunes Pc
Mar 31, 2013I just purchased a Linksys EA4500 (firmware is up to date). However while it set itself up wonderfully. I cannot get my wireless devices (specifically my apple tv) to see my NAS or my itunes PC, My ipads can access the NAS if i put in the correct address but not automatically.
Everything is connected to my cisco switch that is hardwired (2 xboxes, 2 ps3, 3 tv's, Wii, network audio receiver, 2 NAS, printer, 2 computers, etc). I disabled the Wi-Fi on the bell router. On the wifi are a few ipads, 3 blackberries, 1 iphone, 2 laptops).I am fully aware that the reason the wireless devices cannot see the hardwired equipment is because it is on a different subnet.
However when i try and change the IP address of the router to 192.168.2.2 (putting it on the same subnet) the router must detect a conflict then changes itself to a class A address (10.x.x.x) OR i get an INVALID IP address. As well i have noticed an overall degradation in the speed of my network (all gigabit hardware with cat 6 cabling)
Linksys Wireless Router :: E4200 For ITunes Home Sharing
Mar 12, 2011I am using an e4200 router, Windows 7 64-bit, ipad and iphone. The issue that I am having is that the iPad and iPhone cannot maintain a connection iTunes via Home Sharing. When I start iTunes I am able to access Home Sharing on the iPhone and iPad. If I don't connect right away I will lose this capability. Also, the connection is lost after a seeminingly random amount of time. Also, when if I using the iPhone to listen to music and I pick up my iPad and access the wireless network, the phone gets kicked off Home Sharing. The only way to remedy the situation is to re-start iTunes on my computer. I've been messing around with every setting.
View 4 Replies View RelatedITunes Server For Windows Home Server 2011?
Mar 10, 2011Is there an iTunes Server for WHS 2011 available?
View 3 Replies View RelatedLinksys Wireless Router :: Wrt-610n After Unlocking Phone / Reconnecting Wifi / Remote Couldn't Find Itunes
Nov 23, 2010I was trying to remotely command my iTunes library via an iPhone app called Remote. It worked for some times with an intermittent disconnection problem due to the iPhone locking. But even after unlocking the phone and reconnecting the Wi-Fi, Remote couldn't find my iTunes library again and my only workaround was to relaunch iTunes on the PC (which is Ethernet-wired to my router). Few days ago nothing worked!!! I could no more get Remote to find iTunes.
I could not find a solution even by rebooting the router or unplugging the PC's Ethernet cable. Last night I powered off the router and after 10s I powered it on again. And then it worked!I highly suspect a problem between my router and Bonjour which is as UPnP, an Apple protocol for discovering communicating devices. Discovery phase being usually done with broadcast frames, something goes wrong in the router with processing the broadcasts, or is it a Bonjour problem?Please note that even now that Remote can find iTunes, I still have my old intermittent disconnection problem.So is there any incompatibility between WRT-610N and Bonjour and what is the fix ?
Linksys Wireless Router :: Does E4200V2 Redirect To CCC
Jun 29, 2012I think my E4200v2(Firmware Version: 2.0.37 ) should redirect to CCC as this link, is the CCC just could be used in US?
View 4 Replies View RelatedLinksys Wireless Router :: E4200v2 Keeps Rebooting
Mar 16, 2012Recieved this E4200 as a repplacement for a v1 that kept dropping wireless connection. Now after about 1.5 months the router keeps rebooting. Tried resetting, etc...no luck. Calling Cisco now.
View 3 Replies View RelatedLinksys Wireless Router :: Wake On Lan E4200v2?
Mar 28, 2012this topic has been discussed under the v1 software and marked as solved yet it has not been. Has anyone attempted with version 2 software and been able to connect after the arp was flushed?
View 6 Replies View RelatedLinksys Wireless Router :: E4200V2 - How To Do Mac Filtering
Apr 21, 2012Just got my new E4200 v2 router. Set up mac filtering for one device and after saving the change the router was refreshing and disconnected all my devices and could not log in to the router wired or wirelessly and had to do a factory reset. Have the latest firmware. Is this a defect in the router?
View 2 Replies View RelatedLinksys Wireless Router :: Keep Old SSID On E4200v2?
Dec 23, 2011I will soon upgrade my wireless network from a WRT610N to an E4200v2. At setup of the router, I assume I'll be able to change the SSID of the E4200v2 and I plan to keep the same SSID as on my old router. With the same SSID as currently seen by the devices on my network
View 4 Replies View RelatedLinksys Wireless Router :: Is OQS On E4200v2 Really Working
Jun 29, 2012I have a synology DS411 and a ATV2.DS411 is always downloading from internet,normally the download' bandwidth of DS411 is around 2MB/s.In my old netgear 3800,i just need to active WMM and add a port OQS that the port connection DS411 is low.Then when I watch stream video from internet on my ATV2.I can see the DS411's bandwidth will be reduced automatic.I replaced 3800 with E4200v2 some days before,and I have done the same config ,turn WMM ,set ATV MAC to highest and DS411 MAC to lowest. But when I watch ATV2,DS411's bandwidth seems not be reduced,so I cant get the smooth video Its very bad.
View 9 Replies View RelatedLinksys Wireless Router :: E4200v2 / Utilizing More Than One Static IP From ISP?
Feb 29, 2012We have the Linksys E4200v2 router. We have two servers on our network that we want to access remotely (from outside). We have two Static IPs from our ISP. We currently utilize one of those IPs to access one of the servers-no problem. How can we utilize the second IP to access the second server?
View 3 Replies View RelatedLinksys Wireless Router :: Why Does E4200v2 Not Detect VOIP ATA
Jan 11, 2013I have a static IP on the ATA (Linksys PAP-2T) ...the router will only pick it up occasionally...most times it does not. The ATA is on and working (I can call in/out) but I can't see how the router can't find/see it. I have added the ATA to the DHCP reseve list but still nothing. I have the port fowarded for the ATA but when I go to canyouseeme.org it comes up as "Connection timed out"...becuase I think it can't see the ATA behind the Router.
View 1 Replies View RelatedLinksys Wireless Router :: E4200v2 - How To See Who Is Connected To Wifi
Jan 8, 2012On the D-Link it was easy, I can see who is connected to which radio.But I can't figure out how to see who is connected to WiFi on hte E4200?I run several access points in my house, and I need to make sure htey are all working.If I can't see who, if any, is connected, I have no idea if WiFi on the E4200 is working.
View 2 Replies View RelatedLinksys Wireless Router :: E4200V2 Firmware Is Not Available As A Download
Dec 14, 2011V2.0.26.124551 is now available. I did the online upgrade and it took just a couple of minutes including the reboot. The firmware is not available as a download yet for manual install. This firmware is dated 11/14/11 so it doesn't appear to correct the Port 53 issue reported earlier.Release Date: Nov 14, 2011 Firmware version: v2.0.26 (Build 124551) - Support for the WAN L2TP and PPTP protocols
View 1 Replies View RelatedLinksys Wireless Router :: E4200v2 DMZ Does Not Appear To Work Correctly?
Dec 23, 2011E4200v2 DMZ does not appear to work correctly?I have two e4200v2 both with latest firmware and it appears to me that the DMZ setting does not work. I continue to have to apply many port forwarding and triggering rules to make needed ports accessible.
View 9 Replies View RelatedLinksys Wireless Router :: Way To Set-Up E4200v2 And PLWK400 At Home
Aug 16, 2012 I am wondering what is the optimal way to set-up my E4200v2 and PLWK400 at home? I have several devices (laptops, tablets, phones) that connect on .11g and .11n.
My current set-up:
E4200v2: 5ghz - Wireless-N only (SSID home-n), 2.4ghz - Wireless-B/G only (SSID home-g)
PLWK400: SSID home-ext (separate part of the home)
I am using WPA2 Personal security if that makes a different. One question would it be "better" to have the same SSID for all 3 wireless settings (5ghz, 2.4ghz, and PLWK400)? Would the various devices know which frequency to switch to for best speed and range?
Linksys Wireless Router :: E4200v2 Firmware Upgrade
Feb 24, 2013I tried to upgrade my router firmware to the latest 2.1.39.145204 (downloaded from cisco website) but seems like the upgrade didn't go well. I am unable to open the admin webpage. I can get to the login page on 192.168.1.1, after i enter the admin password the next page doesn't load. It keeps showing 'Waiting' at the center of the page forever.. I have tried to do the 30/30/30 reset to no avail, i tried to do tftp downgrade to older firmware version but the tftp boot doesn't even start. Is there any other way i can either fix the current firmware upgrade or downgrade it to the previous version?
View 9 Replies View RelatedLinksys Wireless Router :: E4200v2 - How To Download 2.0.36 Firmware
Jan 23, 2012Where can I download the 2.0.36 firmware?I flashed it through the UI but since the factiry fw is crap I want to try the third party firmware that are available but I want to make sure there is a path back to factory version in case I need to return the product.
View 1 Replies View RelatedLinksys Wireless Router :: E4200v2 Bricked After 1 Month Of Use?
Aug 1, 2012I purchased an e4200v2 to replace my old WRT160n which I have been using for years with no issues. Last night the e4200 crashed on me when I went to reset the router I noticed the CISCO light was blinking very slowly and I had no network connection. I power cycled the router and still no connection so I hit factory reset button. Nothing happened. Did a 30/30/30 reset nothing happened. At this point I have a 34 day old plastic brick on my desk and I'm back to using my old WRT160N. how to unbrick this router?
View 3 Replies View RelatedLinksys Wireless Router :: E4200V2 SPI Blocks FTP From The Internet?
Jan 31, 2012No problem setting up the FTP server on the router. It's working perfectly from inside the LAN. But any attempt to access the built-in server from the WAN side is fruitless. I found that if I turn off the IP4 SPI on the router, I can suddenly connect to the built-in ftp server without issue from the Internet. If the SPI option is checked, its a no go.
Is this a bug? I can't imagine that it is intentionally set up such that you have to turn off the firewall in order to use the FTP function externally. At least it isn't mentioned anywhere I can find and it wouldn't seem logical.
Linksys Wireless Router :: E4200v2 - Won't Connect With Security Up
Feb 24, 2013I've had this E4200v2 for a while now, and it's been giving me a headache because even at default wireless setting with the passphrase, it literally won't ever connect from a linksys wireless adapter using the mixed WPA2 Personal or the 'EasyConnect' button feature or the PIN, with both side's fireware updated to the latest. There is no issue connecting to the router as long as the security is off. I've tried other form of encryption to no luck.
View 1 Replies View RelatedLinksys Wireless Router :: Catch 22 On A Defective E4200v2
Jul 24, 2012My Linksys E4200v2 router died (no blinking lights when a network cable is attached). Is this a bait and switch?
View 2 Replies View RelatedLinksys Wireless Router :: E4200v2 And PS3 Connection With Network
Feb 11, 2012I recently changed my wirless router from the E4200 to the E4200v2. As far as I know, I have the same settings on the E4200v2 as I did on the E4200. My PS3 will not connect to my wireless network via the E4200v2. I even retyped in my network information (SSID and password) onto the PS3. Still "no joy." Any issue with the E4200v2 and the PS3?
View 9 Replies View RelatedLinksys Wireless Router :: Way To Get E4200v2 Remote Management
Mar 30, 2012I have a small issue with Remote Management on my E4200v2.I have enabled it , select https and set Allowed Remote IP Address to any on the default port ( 8080 ).After all of this, I cannot connect to my router from my office or any other place. I'm using DDNS and all its ok ( updated at time ). I've tried also connecting to my direct ip address ( dynamic ) but with no result.P.S. no incoming log from port 443 using https.
View 3 Replies View Related