Cisco :: ASA 5505 Gigabit Upgrade?
Jul 27, 2012if there's a way to upgrade my ASA5505 to support gigE without spending an arm and a leg for an ASA 5510?
View 4 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 3550 Upgrade To Gigabit Switch
Jun 4, 2013I have a 3550 switch right now, and need to upgrade to a gigabit switch, so I'm looking at a 3560G-48. For some reason I purchased an EMI version of my 3550, but run the ipbase image...what I need to look for - is a 3560G-48-s good for what I need?
View 4 Replies View RelatedCisco WAN :: Gigabit Ethernet Loopback Plug For 3845 Router Gigabit Interface
Sep 26, 2012I have an Ethernet Loopback Plug (4 Pairs) made and trying to test the Gigabit Interface on a 3845 Router with a fail result. The interface will show up/up only if I set the interface to 100M/Full Duplex when I plug-in the Ethernet Loopback Plug (4 Pairs). I don't see this Gigabit Interface @ 3845 router has any option to set it to internal or external loopback.
View 2 Replies View RelatedDell :: Broadcom NetXtreme 57xx Gigabit Not Reaching Gigabit
Nov 23, 2011I'm running an Optiplex 330 with the Broadcom NetXtreme 57xx Gigabit ethernet card.
The computer is running Windows 7, 64bit, but there do not appear to be any drivers for that OS.I tried selecting Vista 64bit, but there were no drivers. The Vista 32bit doesn't work.
Then I went to Broadcom and found these drivers: [URL] the W764bit drivers didn't change the fact i'm still on a 100Mbit card (as seen on Local Area Connection Status screen and the Device manager)
Cisco Firewall :: ASA 5505 7.2(4) To 8.2(4) Upgrade?
Feb 27, 2011I'm getting ready to reload an ASA that will be a long drive if it doesn't come back up after this upgrade attempt.
View 9 Replies View RelatedCisco Firewall :: After Upgrade ASA 5505 With 8.2.3 / Not Able To Get SSH
Apr 20, 2011I open case open to the Cisco about I am not able to get the SSH connection from ASA 5505 after upgrade the IOS 8.2.3 and Device Manager 6.3.3 from the older IOS 7.2.4 and device manager 5.2.4.
I am working in MNC and we have more than 30 office around the world.We have all offices have ASA5505 which we upgrade 3 years before and Now We are in procession to upgrade the IOS on all ASA5505 to all 30 offices.
But after I upgrade the 10 offices and relieze that not able to get SSH connection to ASA5505 with new IOS 8.2.3.I opened the 2 times case and call the Cisco Technical but no luck so far.
Cisco Firewall :: Upgrade ASA 5505 From 8.2.5 To 8.3 Or 8.4
Jan 18, 2012I have been delaying an upgrade past 8.2.5 because it is stable and I didnt feel like learning a new way of doing NAT because of the way the code was changed. What is forcing me to go down this path is that I need to be able to let protocol 41 pass through the firewall which doesnt work in 8.2.5 and is what is making me look at 8.3 or 8.4
I know that I will have to install a memory upgrade on both my lab 5505's before I can install the upgraded binary. Will be ordering that in the next few days.
Any suggestions on going to 8.3 or 8.4 based on the reason for the upgrade ? I had been told by TAC to stay away from 8.3 but never got a good reason for that. My lab config (i.e. home ASA) is pretty straight forward (no SSL or IPSEC config), so I would hope it would go fairly smooth. I had heard a lot of horror stories early on but wanted to see how things had been going for everyone with the later versions of code.
Cisco VPN :: 5505 - SSL License Upgrade?
Aug 11, 2011My client is having a 5505 which supports 2 SSL peers as per now and we want an upgrade . I had a look into GPL and I was confused with two of the following part numbers . Which one should I go for as both of these look same for me and there is a huge difference in price .
ASA5500-SSL-10
ASA 5500 SSL VPN 10 Premium User License
ASA-AC-E-5505
AnyConnect Essentials VPN License - ASA 5505 (25 Users)
Cisco Firewall :: SSH Bug After ASA 5505 8.4.2 Upgrade
Aug 3, 2011I just upgraded an ASA5505 running 8.4.1 to 8.4.2 after noticing that I was experiencing the ssh bug described here: [URL]. Now every time I reload the unit I get the following message on the console:
Reading from flash...
!!...
Cryptochecksum (unchanged): b19f76ce 30b189e5 9272b4d4 4f746634
Type '?' for a list of available commands.
[Code]...
I tried searching for this message with no luck at all. The firewall seems to be working ok as I can still get online and my VPN tunnels are up,
Cisco Firewall :: Upgrade ASA 5505 V7.2.4 ASDM V5.2.4?
Feb 28, 2013I have been browsing the forum and the support notes for a couple of hours and haven't found a definitive answer to my question. Our ASA is on the subject versions. I watched a video on YouTube stating that upgrading the ASA is easiest if you upgrade ASDM, then the ASA. Problem is, I don't think I can upgrade ASDM first because I don't see a version that is compatible with ASA 7.2.x and 8.0.x.
View 3 Replies View RelatedCisco Firewall :: Way To Upgrade ASA 5505 Memory?
Jan 30, 2012I am trying to get experience with 8.4 code on my 5505. I purchased a Cisco 512MB memory upgrade and installed it. It booted up once and I thought I was ok. I then looked down and noticed that all lights were blinking on the front panel and I had no console access.
[code]...
Cisco Firewall :: Upgrade From ASA 5505 8.2 To ASA 5510 9.0 (1)
Jan 24, 2013I am trying to find out the best path to upgrade to two ASA 5510 running 9.0 (1). I know there are changes in the new version. Let me know what information you need and i will post.
View 2 Replies View RelatedCisco VPN :: 5505 Upgrade Only Web Vpn Portion To Allow More Licenses
Sep 16, 2012I have a cisco ASA5505, with base license, it appears I can only have 2 ssl/webvpn connection running at any one time. How can I upgrade only the webvpn portion to allow more licenses?
View 2 Replies View RelatedCisco Firewall :: ASA 5505 License Upgrade
Dec 17, 2012I have a Cisco ASA 5505 device with basic (default) license, currently all my reirections, VPN's, VLAN's(3 Vlan's) etc are configured on the same and are working fine.Now i need to upgrade my basic license to "Security Plus" for some additional features, if i upgrade it directley is there any complications in present rules, below is my doubhts
1. if i upgrade, did it change any of my present configurations ?
2. is there any name change or property changes for VLAN's or VPN's
3. did it affect the firewall functions
4. If anything goes wrong, can i restore it in to my old state using my previous dump.
Cisco Firewall :: ASA 5505 ASDM Upgrade
Nov 16, 2011I have successifuly upgraded ASA and ASDM image. My question is how to make it to boot it as default when you do a factory reset of the device. For the ASA image I found out that it will boot the first image it founds on the flash, so I left only the latest bin file and if I do factory reset it boot the latest. But for ASDM it still boots the old one, because there is no "asdm image disk0:/asdm-645.bin" command in the config. I`m not sure how, because I only left the new ASDM bin image. Is there any variable or something that still points to old asdm image?
My ASA version is 8.4(2) and ASDM 6.4(5). The old one was ASA 8.2 and ASDM 6.3.
Cisco VPN :: ASA 5505 - S2S VPN Tunnel Fails After Upgrade 8.3 To 8.4
Jun 6, 2012I upgraded an ASA 5505 from 8.3(2) to 8.4(4) this evening. The 5505 is a backup and used to perform testing prior to production changes. After the upgrade was complete, a VPN tunnel began to fail. I did a limited search online to see if this was a known issue or something new. I also reviewed the release notes but did not see anything that matched the issue I received.
My concern is that this tunnel configuration is scheduled to be deployed to the production firewalls next week after their upgrade. But if it failed on the upgraded test unit, it may fail on the production units.
I downgraded the backup unit to 8.3(1) and verified that the tunnel indeed worked at that level.
Cisco Firewall :: ASA 5505 Security Plus License Upgrade?
Apr 19, 2012We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?
View 1 Replies View RelatedCisco Firewall :: Upgrade ASA-5505 After SecPlus Installed
Aug 21, 2012I have several ASA-5505 units with the SecurityPlus license. These are running older OS versions and I would like to upgrade them. I am wondering if I will lose the SecurityPlus if I upgrade the image to 8.3
View 4 Replies View RelatedCisco VPN :: ASA 5505 - AnyConnect Upgrade / Web Deploy And ActiveX
Jan 13, 2013Attempting to upgrade from ASA 8.3.2, ASDM 6.3.4, Any Connect 2.5.1 to ASA 8.4(4)1, ASDM 6.4(9) and Any Connect 3.1.00495 using ASA 5505.
Client is Windows XP SP3 w/ IE7. Can log into the ASA web portal and starts to install via ActiveX. I get past the IE7 message bar to authorize installing the ActiveX control. I briefly see a message that says "ActiveX could not be launched" (I think. It is very fast) and then the install hangs w/ the message in the web connect dialog about the IE7 message bar. If I let the timer expire, the java install also fails. If I download the installer via the web portal, and install Any Connect via the downloaded installer, everything works fine.
Same problem w/ ASA 9.1.1, ASDM 7.1(1) and Any Connect 3.1.02026. I have added the web page address to the trusted zone, and checked all the zones for permissions to install ActiveX controls, etc. Worked w/ the older/original software when I remove the kill bit for Microsoft KB2736233. Have not installed any custom Any Connect profile to use transforms. I did see in the release notes some information on NO INSTALL ACTIVEX=0, but I think this applies to the per-install package only.
Cisco Firewall :: 5505 - Ping And SNMP Broken After 8.4(4)1 Upgrade?
Sep 19, 2012Before upgrading to 8.4(4)1 I was able to ping our inside interface accross the VPN. Now I cannot. Because ping is not working, my SNMP server thinks that the device is offline however I know the VPN tunnel is still up and the remote branch office is working fine. Here is the config of the branch office ASA 5505 in question. How to get icmp working again?
ASA Version 8.4(4)1
!
hostname BranchASA5505
domain-name houston.deh
[Code].....
Cisco Firewall :: 5505 - ASDM Don't Load After Upgrade To JAVA 7?
Oct 18, 2012My macbook pro recently upgraded to the last version of java and now I can open the ASDM for my Cisco ASA 5505, when I try open, only show me the window of Java 7 ..., and don't load the ASDM.
View 15 Replies View RelatedCisco Firewall :: ASA 5505 All Lights Flashing After A Memory Upgrade
Aug 29, 2012I have DSL 8Mbps DL and 768kbps UL,Internet -> Modem -> Cisco Router -> Firewall -> Switch Core - > Multiple switches like sfe2000p,CiscoRouter: i use port gig0/1 for PPPoE and i use port gig0/2 for LAN static,Router port gig0/2 with 122.54.144.153/29 connected directly to Firewall port13 with 122.54.144.154/29,i want 122.54.144.153/29 will my default gateway,Please include no limit bandwidth,filter etc at router, Firewall will be DHCP Server and control the bandwidth, filtering etc and the client computer should get 8Mbps.
View 2 Replies View RelatedCisco Firewall :: Can't Reload ASA 5505 After Flash And Memory Upgrade
Mar 1, 2013I recently upgraded the flash and the RAM on one of my ASA 5505 lab machines. The flash was upgraded from 128 to 512MB and the RAM was also upgraded from 256 to 512MB. I am using asa845-k8.bin. The firewall boots and runs file until you issue the reload command. The system shuts down but never reloads.
View 11 Replies View RelatedCisco Firewall :: 5505 - Automated Upgrade To Incompatible ASDM ASA Versions
Jun 5, 2011I used ASDM to upgrade a 5505 tonight and now I get the error message attached. How/where do I find out which versions are compatible?
View 2 Replies View RelatedCisco Firewall :: Upgrade ASA 5505 IPBase 8.2.1 To 8.2.5 Broke External Printer
May 16, 2013I have a printer sitting on an outside interface e0/7 that external vendors were able to print to prior to an ISP IP address change and IOS upgrade.
We upgraded our IOS from 8.2.1 to 8.2.5. The printer wasn't changed so the MAC address mapping is still correct on the ISP translation list. The ISP issues DHCP MAC reservations for static IP address assignment. My printer doesn't seem to be getting the DHCP assignment now.
Here is the before and after config. I'm just wondering since this worked prior to changeing the IP and IOS changes if there is another command I need since upgrading from 8.2.1 to 8.2.5. The DHCP IP address is assigned and is working on my e0/0 vlan2 outside interface.
Config that worked prior to the IP and IOS change. hostname hrhdomain-name hrh.comenable password passwd multicast-routingnamesname 10.200.200.0 TestNet!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.8 255.255.255.0ospf cost 10ospf network point-to-point non-broadcastospf
[Code]....
Cisco Firewall :: Upgrade From 5505 To 5520 On Network - ASA Firewall Throughput
Feb 27, 2013I'd like to see some REAL LIFE comparisons of ASA firewall throughput (a bit like this one for ISR G2 Routers - [URL].
The reason I ask is that I recently upgraded a firewall from an ASA5505 to an ASA5520 on a small network where the only outside connectivity was a single 10meg Internet circuit with an IPSEC VPN (not landed on the firewall but on a router) to another site.
When I swapped out the firewall the users noticed a big improvement. The firewall is not doing anything out of the ordinary - no IPS or VPN, just standard state full inspection.
Cisco Wireless :: 1242 - Cannot Upgrade AP To LWAP Using Upgrade Tool On Windows 7
Sep 29, 2011I have two Windows 7 computers and neither one will successfully upgrade a 1242 AP to LWAP. However, I go to a coworker's XP machine and run the tool without issues. On Windows 7 I keep receiving the error message of ACL or Firewall is blocking. I have added rules and then even tried disabling the firewalls completely on both computers and still no success.
View 7 Replies View RelatedCisco Wireless :: 5500 AP Upgrade Lic Upgrade On Controller
Jun 19, 2012I am facing a problem to install a ap upgrade lic file on controller 5500. Iam getting the following error:
% Error: License file transfer failed - Error from server: File not found
I have confusion here that when I configure this command from GUI
tftp://172.32.45.22/cmm/standard.lic
What i should use for /cmm/ ????
Let say i have lic. file is on desktop of tftp server computer and I say in this command
tftp://10.12.70.35/??/license file .lic
AAA/Identity/Nac :: CSACS-1121-UP-K9 - Possible To Upgrade It Being Non Upgrade Part
Sep 10, 2012Is it possible to upgrade the CSACS-1121-UP-K9 to be a non upgrade part? We were going to upgrade from a Windows 4.x to the above Appliance (version 5.x) but there is now a reason to keep the old Windows version running therefore we cannot give the new Appliance the old ACS's licenses?!So we should have (with hindsight) bought a fresh version of the ACS 5.x rather than an upgrade.
View 1 Replies View RelatedCisco :: Speed On Gigabit Interface
Mar 14, 2012According to Cisco's site the WS-X6748-GE-TX is a "10/100/1000" module.URL
View 7 Replies View RelatedCisco SGE2010P - 48p Gigabit PoE Switches?
Jan 2, 2011I recently changed jobs and am now supporting a small(but rapidly growing) environment as follows:
35 PoE phones with a switchport going to a workstation
8 PoE cameras
7 servers(2 NICs each with link aggregation)
Various racked network hardware
I currently have an Enterasys 10/100 48p PoE switch powering all of the PoE devices, but the switch is getting old and I'd like to start converting over to pure gigabit. There's also an HP Procurve 2810-48G that all of the servers and other racked network hardware are plugged into. That switch is fine, but doesn't have PoE, so its uses are limited to the rack.
Just a few other things to keep in mind... Whomever setup this network failed to separate the voice and data traffic into their own VLANs + QoS, so that needs to be done as well. Expandability is key as the company is growing at a rapid pace- Stacking is certainly desirable, but not an absolute requirement.
I'd like to keep the price point bellow $2000 if I can get a good product. Cisco would be cool, but the price point is way too high for the features that I need. Any great recommendations? Here's some that I've been looking at:
Cisco SGE2010P
Netgear GS748TPS
Does ICS Work On A Gigabit Network
Jul 7, 2011Should a computer running XP be able to use ICS to share its internet connection across a gigabit network to a computer with a Fast Ethernet card running Vista? If so, I have a problem and will post a more detailed question.
View 9 Replies View RelatedNo Gigabit Connection To LAN Controller?
Jul 7, 2011I recently built a PC with an ASUS P8P67 mobo that uses the Realtek 8111E Gigabit LAN Controller. My issue is that it won't even open a connection to the internet when I plug the ethernet cable from the motorola SB6120 into the port on the mobo.What's odd is if I keep the cable modem plugged into my D-Link Di-624 wireless router and then just use the LAN ports on the back to route an ethernet cable to my mobo, all works just fine. But I am sure this is at the expense of a slower connection speed through that old router right?The modem turns the LINK light BLUE, seeming to indicate a gigabit connection if the above router-skipping connection is used, but still there's no connection to the internet.
View 1 Replies View Related