Cisco Application :: Passdetect Command Equivalent In CSS 11503?

Sep 11, 2011

what is the "passdetect" command equivalent in CSS 11503 load balancer. software version 8.20.

View 3 Replies


ADVERTISEMENT

Cisco Application :: Sample Command Output Of Show Chassis Inventory For CSS 11501 / 11503 / 11506?

Oct 30, 2011

I am trying to get a sample command output of "show chassis inventory" for:

CSS 11501
CSS 11503
CSS 11506

View 1 Replies View Related

Cisco WAN :: What Is The Equivalent Command On IOS-XR 4.3.0

Jan 10, 2013

I want to configure this:
 
ip vrf TEST
rd 65500:1
route-target export 65500:1
route-target import 65500:1
bgp next-hop Loopback500
 
on IOS-XR 4.3.0
 
What is the equivalent command on IOS-XR?
 
route-policy TEST1
set next-hop 1.1.1.1 
vrf TEST
address-family ipv4 unicast
import route-policy TEST1

View 1 Replies View Related

Cisco Infrastructure :: 5510 - Equivalent Of Netstat Command On Router

Jul 30, 2003

Is there any way to see on what ports a Cisco 5510router is listening to just like a "netstat -an" on UNIX would do. I could easily do a portscan to give me this report but would prefer having the information through a show command.

View 4 Replies View Related

Cisco Switching/Routing :: Equivalent Command To Configure On Nexus 5596

Jun 21, 2012

what is the equivalent command to configure on the Nexus 5596?  OS version 5.1(3)N2(1) Catalyst 45k ip igmp snooping vlan 1036 mrouter interface Po20

View 1 Replies View Related

Cisco Switching/Routing :: Equivalent Command To Show Int Summary On The Nexus 7000?

Nov 20, 2011

tell me if there is an equivalent command to Show int Summary on the Nexus 7000?
 
eg
MYCISCOSW01#show int summary
*: interface is upIHQ: pkts in input hold queue     IQD: pkts dropped from input queueOHQ: pkts in output hold queue    OQD: pkts dropped from output queueRXBS: rx rate (bits/sec)          RXPS: rx rate (pkts/sec)TXBS: tx rate (bits/sec)          TXPS: tx rate (pkts/sec)TRTL: throttle count

[code]....
 
I find it a useful command on the 6500 to spot high traffic flows.

View 7 Replies View Related

Cisco Application :: XFF On CSS 11503?

Aug 1, 2011

Is the XFF [URL] on the Cisco CSS 11503?  If not, is it on the roadmap for a future code release?

View 1 Replies View Related

Cisco Application :: MIB Objects For CSS 11503?

Jun 9, 2009

i need the MIB object names for monitoring the processor and Memory Utilization of CSS 11503 with software version 7.50 Where can I find it?

View 5 Replies View Related

Cisco Application :: 11503 CSS HTTP Redirects

Jul 19, 2011

I have a number of web sites that are currently being load balanced by CSS 11503s runninng 8x code.  I was recently requested to configure HTTP -->  HTTPS redirects on the CSS for every site.  In the past, I have only configured the redirects for sites that had a requirement.  Now it appears that the server teams want all content encrypted.

1)  What impact will this have on the CPU?
2)  What impact will this have on Memory utilization?
3)  Is there a maximum nubmer on redirects?
4)  Are there other things I should be concerned about?

View 3 Replies View Related

Cisco Application :: CSS 11503 SSL Service Suspended

Mar 24, 2013

i have two CSS-11503 in redundant mode running 8.20 code.  We had an incident in our network where a layer 2 loop caused some high traffic through the CSS' and had to shutdown some network gear(including the CSS) to clear the problem.  When the CSS' were powered back up, the SSL service was suspended, why this would occur?  There rest of the config appeared normal. I am the only person on these boxes, the configs were written, and I have never had a reason to suspend the ssl service.

View 1 Replies View Related

Cisco Application Networking :: CSS 11503 And SAN Cert

Oct 14, 2012

I know that CSRs cannot be generated with multiple names, but if the SAN is added after the cert is ordered from Geo Trust, Veri sign, etc. can the CSS support using the cert?

View 1 Replies View Related

Cisco Application :: Transferring Existing SSL Certificate From 11503 To ACE?

Jun 2, 2012

We now have a new requirement . We are replacing existing pair of CSS with ACE 4710 appliances. The problem here is that I can see from the configuration that  some SSL certificate installed in CSS .Is it possible to transfer the existing SSL certificate from the 11503 to the ACE? Or, do we need to generate a new key pair and CSR on the ACE?  Is there any document available to know the steps for the same.

View 2 Replies View Related

Cisco Application :: Several Pairs Of CSS11501 And 11503 In Network

May 21, 2012

We have several pairs of CSS11501 and 11503 in our network.This issue affects only one pair of CSS11503 in one of our data centres. [code] We use vrrp in one-armed mode for load balancing and they units have performed great for a number of years. We're obviously going to be migrating to ACE ... but not just yet.We have started to experience a problem with replicating the configurations between two CSS11503 in a pair.When running the commit-VipRedundConfig, it starts off happily enough, though slowly.Ending with "working" and the spinning cursor, even after 1 hour the script hasn't completed.We noted on the backup CSS that the APP configuration disappears during the process and I can't remember if this is normal behaviour.
 
Re-adding the app session configuration seems to interrupt the process, and when checking the configuration on the backup CSS approximately half of it is missing. Everything after the first owner is gone.

1. Configuration is too large, or just large enough to make the commit script take too long for realistic service.
2. Software bug?
3. Combination of both.
4. From now on manually add config to both CSS's and maintain it by process management.

View 5 Replies View Related

Cisco Application :: CSS 11503 Session Stickiness Configuration

Sep 17, 2012

I only have configured load balancing on apache with a very simple setup. I have to deploy 2 applications on my clients environment that run inside jboss. One of these applications needs session to be sticky to work properly. The other does not.
 
In apache I can configure is the sticky parameter is true or false, based on the url, like /appA/* is sticky and /appB/* is not sticky. Can I do that in a CSS 11503? My client insists that it is impossible. That the CSS is only ip based.
 
I copied the configuration below from the manual: owner arrowpoint # content ruleWapSticky

View 14 Replies View Related

Cisco Application :: CSS 11503 V ACE 4710 Performance Comparison

Mar 20, 2012

Am trying to verify performance figures for ACE 4710 as EOL replacement for a CSS 11503 Am sure that the ACE 4710 smokes the CSS but have to complete the due diligence
 
Pulling figures from data sheets, release notes etc.. I have only come up with the followingIs there any further figures available for the ACE 4710 to fill in the blanks in table?

View 1 Replies View Related

Cisco Application :: 11503 Ping For One Virtual Host

Apr 27, 2013

I have a single  cisco 11503 load balancer.There is a single Banner student information system which is load balanced on it with Virtual ip 10.3.20.101 which is working fine without any issues .I am now trying to add an Oracle ERP application with virtual IP 10.3.20.230 and physical ips 10.3.19.22 and 10.3.19.23 all on port 8003.When I just make the group  ERP-Apps-Grp active , the vitual ip address 10.3.20.230 is pingable , but when I make the  the content Erp_IAT active  it stops pinging. [code]

View 6 Replies View Related

Cisco Application :: CSS 11503 - Multiple Content Groups?

Oct 4, 2011

I currently have a content group as follows;
 
content My_Group
add service blade1
add service blade2
add service blade3
vip address 1.2.3.4
advanced-balance arrowpoint-cookie

[code]...
 
So I have 3 blades which are proxy servers and user go first to an MS ISA server then the VIP of the CSS and then the rules processes them give them a blade and chuck them out onto the Internet.
 
I want to leave the above rule, but remove one blade create an additional content group with that blade and have it process requests for a particular site so, I would create the following
 
content My_Group2
add service blade3
vip address 1.2.3.4
advanced-balance arrowpoint-cookie

[code]...
 
So my question is can I do that having the same VIP's etc so if a request comes in and it matches www.thewebsite.com that the second content rule matches it 'better' and therefore processes it or would it still be caught by the "/*" content group. I don't want to create more VIPS as I have a real ache getting firewall rules done.

View 9 Replies View Related

Cisco Application :: Hairpinning On CSS 11503 When Using Source Groups?

Jun 26, 2011

I'm not sure if my terminology is correct when using hairpinning but i was wondering if there is any special config needed when you try to access a content rule VIP from a server that's configured as a member of a source group on the same CSS?
 
So say i have a content rule with a VIP 20.20.20.20 and i also have two servers 192.168.1.1 and 192.168.1.2 that are part of a source group with VIP of 20.20.20.21. My problem at the moment is if from the servers 192.168.1.x i try to ping the other VIP 20.20.20.20 that's configured on the same CSS then it doesn't work and ping fails. The same happens with HTTP traffic to the 20.20.20.20 VIP.
 
I would have thought that the NAT of the source group would happen before the routing so the 192.168.1.x IP's would be natted to 20.20.20.21 and then passed over for routing where the CSS would see that the VIP 20.20.20.20 is local and it would send it on it's way.
 
I thought it might be ACL related but i increased the verbosity of acl logging and couldn't see anything in the logs.The source group works fine on it's own and from the CSS itself i can ping the 20.20.20.20 VIP fine. It just seems that from the source group members i can't ping the VIP.

View 1 Replies View Related

Cisco Application :: How To Monitor Status Of Vips On 11503 Through SNMP

Sep 26, 2011

what is the OID  for See the hit status of the spefic VIP and  RIP coming under the VIP .apeart from this  CSS box having any module to moniter the hit status or VIP's and RIP's

View 2 Replies View Related

Cisco Application :: CSS 11503 HTTP Keepalive Fails Even Though Server Responds

Nov 29, 2011

I recently "inherited" a CSS 11503 - I've only used ACEs before - and I want to get HTTP keepalives working.To start, I created a test service:
 
lb-1# show run service sunbird-http-7025-test
!************************** SERVICE **************************
service sunbird-http-7025-test
  port 7025
  ip address 141.211.229.168

[code].....

View 2 Replies View Related

Cisco Application :: CSS 11503 Flow Idle Timeout Not Working As Expected?

Jan 20, 2012

I have a CSS 11503 with a basic content rule for TCP 10000 going to a few backend servers. I was looking into the default timeout values for flows and when testing using telnet the flow didn't terminate as expected?
 
For example, i have no 'timeout multiplier' specified in the config and when i look at the output of 'show flow-timeout default' it tells me the default 16 seconds timeout is in effect for *. With that in mind, i telnet to the content rule vip on TCP 10000 and on the backend server using wireshark i can see the TCP threeway handshake. With no data passing i'd expect the CSS to terminate this flow after 16 seconds.. yet it takes exactly 128 seconds before wireshark shows the RST and the flow is terminated. 128 being 8 times the default 16 second flow timeout.
 
If i try to force the connection to close early by specifiying 'flow-timeout-multiplier 2' in the content rule, or even a multiplier of 40, it still waits 128 seconds to close the telnet connection.

View 1 Replies View Related

Cisco Application :: CSS 11503 - Layer 5 Content Rule Match Wildcard And Suffix

Oct 2, 2011

Is it possible on the CSS11503 to create a layer 5 content rule that matches a url "/*/_edit".

View 3 Replies View Related

Cisco Application :: CSS 11503 Ether-channel Configuration For Redundant Server Link

Jun 18, 2011

I have already raised this discussion on "LAN, Switching and Routing" group. But I guess this is the right group for my queries. So I am sending my queries in this group again.
 
We are using CSS 11503 with one 16FE line card. We have connected 3 servers with redundant link. So FE1-2 in Server1, FE 3-4 in Server2 and FE5-6 in Server3. Our system team has configured APA in their servers as they are using HP-Ux.
 
1) Do we need to do any configuration at line card.

2) Do we need to do ether-channel at loadbalancer end. if yes, can you share me any cisco doc on how to do it.

View 1 Replies View Related

Cisco Application :: 11503 - Stickiness Not Working Fine Without Clearing Session Manually

Sep 11, 2012

We have a pair of CSS 11503 installed in our DC. Stickiness is configured for one of the application since long back and was working pretty fine till last couple of months. Since last two months, we observed that CSS is not distributing sessions the way it suppose to be. Mostly, it forwards the session to same server even though request is coming from different sources. Once we refresh the sessions manually, it starts working fine. We have to do this exercise manually every alternate day.

View 1 Replies View Related

Cisco Application :: Content Switch 11501 / 11503 Abnormal Interface Link Down?

Mar 27, 2013

I have 2 pair of 11501 switches and 1 pair of 11503 switches on 3 sites(LA, China, Taiwan).Each site has a pair of 1105x switch running as redundancy between them and is a standalone which will not interact with others.Recently a series of interfaces(ports) down happened to every active 1150x switches without any reason and log.Especially today, it happened to active switches at 5:39 AM meanwhile on 3 sites.

View 3 Replies View Related

Cisco Application :: CSS 11503 - Server-to-server Load Balancing?

Feb 16, 2012

I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
 
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
 
interface 1/1
   trunk
   vlan 1
    default-vlan
  vlan 555

[code]....

View 3 Replies View Related

Cisco WAN :: What Is Equivalent For OTV For 6500 VSS

Mar 17, 2011

what is the Equivalent for OTV  for 6500 VSS,curently we r connected over L3 MPLS.

View 5 Replies View Related

Cisco WAN :: What Is TOS Value Equivalent To DSCP Value AF31

Dec 3, 2011

I am wondering what is the TOS value equivalent to DSCP value AF31? I am wondering what is the TOS value equivalent to DSCP value AF31?I have tried to use the charts but I couldn’t understand how to convert it.

View 5 Replies View Related

Cisco :: What Are Equivalent Models From Netgear / Dlink And HP

Mar 10, 2013

I am intetested in Cisco 2960 ttl models, but need to justify my choice over other brands.What are the equivalent models from netgear, Dlink and HP.

View 1 Replies View Related

Cisco Firewall :: Which Model Is Equivalent To Fortigate 310B

Sep 10, 2011

My customer is looking for cisco firewall which is equivalent to Fortigate 310B.

View 2 Replies View Related

Cisco Wireless :: AP 1552 Is Equivalent Of Local Mode?

Jun 24, 2012

I found this sentence in 1552 AP guide."AP1552 comes only in the Bridge mode and the mode cannot be changed. A mesh access point performs CleanAir function and also serves clients on the assigned channel similar to the way the Cisco Indoor CleanAir AP3500 (nonmesh mode) operating in LMAP mode serving clients on its assigned channel. The mesh AP also monitors the spectrum only on that channel."We want to use this AP as a local AP ( not for mesh deployments) and serve our wireless clients. The main thing why we need this is just operating temperature. Is it good choice? Does it will function as "normal" local AP or we will have any problems , because of that "mesh" mode?

View 12 Replies View Related

Cisco Routers :: RV082 - What Is QuickVPN Equivalent For Linux

Dec 22, 2011

I want to connect from a Linux station to RV082, is it possible? What software can I use and with what configuration?

View 2 Replies View Related

Cisco Wireless :: Equivalent Of Linksys E3000 Router?

Oct 24, 2010

What is the equivalent with Cisco of the Linksys e3000 router (dual band/dual radio/802.11n) ?

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved